summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2010-09-06mlx4_en: Fixed Ethtool statistics reportYevgeny Petrilin
The values didn't match the title after removing the LRO statistics in commit fa37a9586f92051de03a13e55e5ec3880bb6783e Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06mlx4_en: Consider napi_get_frags() failure.Yevgeny Petrilin
If failed to get skb frags using napi_get_frags(), the packet is dropped. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06drivers/atm/firestream.c: Fix unsigned return typeJulia Lawall
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06drivers/net: Removing undead ifdef CHELSIO_T1_1GChristian Dietrich
The CHELSIO_T1_1G ifdef isn't necessary at this point, because it is checked in an outer ifdef level already and has no effect here. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06drivers/net/jme: Use pr_<level>Joe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert jeprintk to pr_err Remove jeprintk macro define Remove periods from end of logging messages Coalesce format strings Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06isdn: cleanup: make buffer smallerDan Carpenter
This showed up in my audit because we use strcpy() to copy "ds" into a 32 character buffer inside the isdn_tty_dial() function. But it turns out that we only ever use the first 32 characters so it's OK. I have changed the declaration to make the static checkers happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06isdn: potential buffer overflowsDan Carpenter
cs->ics.parm.setup.phone is a 32 character array. In each of these cases we're copying from a 35 character array into a 32 character array so we should use strlcpy() instead of strcpy(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06NET: bna, fix lock imbalanceJiri Slaby
bnad_set_rx_mode omit to unlock bna_lock on one fail path. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Debashis Dutt <ddutt@brocade.com> Cc: Rasesh Mody <rmody@brocade.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06drivers/net/fs_enet/fs_enet-main.c: Add of_node_put to avoid memory leakJulia Lawall
In this case, a device_node structure is stored in another structure that is then freed without first decrementing the reference count of the device_node structure. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression x; identifier f; position p1,p2; @@ x@p1->f = \(of_find_node_by_path\|of_find_node_by_name\|of_find_node_by_phandle\|of_get_parent\|of_get_next_parent\|of_get_next_child\|of_find_compatible_node\|of_match_node\|of_find_node_by_type\|of_find_node_with_property\|of_find_matching_node\|of_parse_phandle\|of_node_get\)(...); ... when != of_node_put(x) kfree@p2(x) @script:python@ p1 << r.p1; p2 << r.p2; @@ cocci.print_main("call",p1) cocci.print_secs("free",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Update module information and versionSantiago Leon
Add an entry to the MAINTAINERS file for ibmveth, clean up the copyright and add all authors. Change the name of the module to reflect the product name over the last number of years. Considering all the changes we have made, bump the driver version. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Remove some unnecessary include filesSantiago Leon
These files probably came across from the skeleton driver. Remove them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Convert driver specific assert to BUG_ONSantiago Leon
We had a driver specific assert function which wasn't enabled most of the time. Convert them to BUG_ON and enable them all the time. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Return -EINVAL on all ->probe errorsSantiago Leon
We had a few cases where we returned success on error. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Coding style fixesSantiago Leon
Fix most of the kernel coding style issues in ibmveth. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Some formatting fixesSantiago Leon
IbmVethNumBufferPools -> IBMVETH_NUM_BUFF_POOLS Also change IBMVETH_MAX_MTU -> IBMVETH_MIN_MTU, it refers to the minimum size not the maximum. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Convert driver specific error functions to netdev_errSantiago Leon
Use netdev_err to standardise the error output. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Convert driver specific debug to netdev_dbgSantiago Leon
Use netdev_dbg to standardise the debug output. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Remove redundant function prototypesSantiago Leon
These functions appear before their use, so we can remove the redundant prototypes. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Convert to netdev_alloc_skbSantiago Leon
We were using alloc_skb which doesn't create any headroom. Change it to use netdev_alloc_skb to match most other drivers. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: remove procfs codeSantiago Leon
We export all the driver specific statistics via ethtool, so there is no need to duplicate this in procfs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Enable IPv6 checksum offloadSantiago Leon
This patch enables TCP checksum offload support for IPv6 on ibmveth. This completely eliminates the generation and checking of the checksum for IPv6 packets that are completely virtual and never touch a physical network. A basic TCPIPV6_STREAM netperf run showed a ~30% throughput improvement when an MTU of 64000 was used. This featured is enabled by default, as is the case for IPv4 checksum offload. When checksum offload is enabled the driver will negotiate IPv4 and IPv6 offload with the firmware separately and enable what is available. As long as either IPv4 or IPv6 offload is supported and enabled the device will report that checksum offload is enabled. The device stats, available through ethtool, will display which checksum offload features are supported/enabled by firmware. Performance testing against a stock kernel shows no regression for IPv4 or IPv6 in terms of throughput or processor utilization with checksum disabled or enabled. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Remove duplicate checksum offload setup codeSantiago Leon
Remove code in the device probe function where we set up the checksum offload feature and replace it with a call to an existing function that is doing the same. This is done to clean up the driver in preparation of adding IPv6 checksum offload support. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Add optional flush of rx bufferSantiago Leon
On some machines we can improve the bandwidth by ensuring rx buffers are not in the cache. Add a module option that is disabled by default that flushes rx buffers on insertion. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Add scatter-gather supportSantiago Leon
ibmveth can scatter gather up to 6 segments. If we go over this then we have no option but to call skb_linearize, like other drivers with similar limitations do. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Use lighter weight read memory barrier in ibmveth_pollAnton Blanchard
We want to order the read in ibmveth_rxq_pending_buffer and the read of ibmveth_rxq_buffer_valid which are both cacheable memory. smp_rmb() is good enough for this. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Add rx_copybreakSantiago Leon
For small packets, create a new skb and copy the packet into it so we avoid tearing down and creating a TCE entry. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Add tx_copybreakSantiago Leon
Use the existing bounce buffer if we send a buffer under a certain size. This saves the overhead of a TCE map/unmap. I can't see any reason for the wmb() in the bounce buffer case, if we need a barrier it will be before we call h_send_logical_lan but we have nothing in the common case. Remove it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Remove LLTXSantiago Leon
The ibmveth adapter needs locking in the transmit routine to protect the bounce_buffer but it sets LLTX and forgets to add any of its own locking. Just remove the deprecated LLTX option. Remove the stats lock in the process. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: batch rx buffer replacementSantiago Leon
At the moment we try and replenish the receive ring on every rx interrupt. We even have a pool->threshold but aren't using it. To limit the maximum latency incurred when refilling, change the threshold from 1/2 to 7/8 and reduce the largest rx pool from 768 buffers to 512 which should be more than enough. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Remove integer divide caused by modulusSantiago Leon
Replace some modulus operators with an increment and compare to avoid an integer divide. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ns83820: Use predefined autoneg constantsDenis Kirjanov
Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ns83820: Add copper device settingsDenis Kirjanov
Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ns83820: Remove unused have_optical variable.Denis Kirjanov
Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06wan: make read-only data conststephen hemminger
Change several wan drivers to make strings and other initialize only parameters const. Compile tested only (with no new warnings) Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-05r8169: fix rx checksum offloadEric Dumazet
While porting GRO to r8169, I found this driver has a bug in its rx path. All skbs given to network stack had their ip_summed set to CHECKSUM_NONE, while hardware said they had correct TCP/UDP checksums. The reason is driver sets skb->ip_summed on the original skb before the copy eventually done by copybreak. The fresh skb gets the ip_summed = CHECKSUM_NONE value, forcing network stack to recompute checksum, and preventing my GRO patch to work. Fix is to make the ip_summed setting after skb copy. Note : rx_copybreak current value is 16383, so all frames are copied... Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03cxgb3: Avoid flush_workqueue() deadlock.Casey Leedom
Don't call flush_workqueue() on the cxgb3 Work Queue in cxgb_down() when we're being called from the fatal error task ... which is executing on the cxgb3 Work Queue. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03cxgb3: Leave interrupts for fatal errors asserted in common code.Casey Leedom
Platform code needs to deal with them now. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03cxgb3: Set FATALPERREN.Casey Leedom
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03cxgb3: Add register bit definition for Fatal Parity Error.Casey Leedom
Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03tulip: use integrated netdev statsEric Dumazet
struct tulip_private is a bit large (order-1 allocation even on 32bit arch), try to shrink it, remove its net_device_stats field. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02drivers/net: avoid some skb->ip_summed initializationsEric Dumazet
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-09-02bna: fix stats handlingEric Dumazet
get_stats() method incorrectly clears a global array before folding various stats. This can break SNMP applications. Switch to 64 bit flavor to work on a user supplied buffer, and provide 64bit counters even on 32bit arches. Fix a bug in bnad_netdev_hwstats_fill(), for rx_fifo_errors, missing a folding (only the last counter was taken into account) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2010-09-02net: another last_rx roundEric Dumazet
Kill last_rx use in l2tp and two net drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01starfire: Temporary kludge to fix powerpc build.David S. Miller
Add a dma_addr_t 64-bit case for powerpc with 64-bit phys addresses. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01pxa168_eth: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/net/pxa168_eth.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01skge: add GRO supportEric Dumazet
- napi_gro_flush() is exported from net/core/dev.c, to avoid an irq_save/irq_restore in the packet receive path. - use napi_gro_receive() instead of netif_receive_skb() - use napi_gro_flush() before calling __napi_complete() - turn on NETIF_F_GRO by default - Tested on a Marvell 88E8001 Gigabit NIC Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01drivers/net/can/mscan/mpc5xxx_can.c: Add of_node_put to avoid memory leakJulia Lawall
Add a call to of_node_put in the error handling code following a call to of_find_matching_node. This patch also moves the existing call to of_node_put after the call to iounmap in the error handling code, to make it possible to jump to of_node_put without doing iounmap. These appear to be disjoint operations, so the ordering doesn't matter. This patch furthermore changes the -ENODEV result in the error handling code for of_find_matching_node to a return of 0, as found in the error handling code for of_iomap, because the return type of the function is unsigned. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1,E2; statement S; @@ *x = (of_find_node_by_path |of_find_node_by_name |of_find_node_by_phandle |of_get_parent |of_get_next_parent |of_get_next_child |of_find_compatible_node |of_match_node |of_find_node_by_type |of_find_node_with_property |of_find_matching_node |of_parse_phandle )(...); ... if (x == NULL) S <... when != x = E *if (...) { ... when != of_node_put(x) when != if (...) { ... of_node_put(x); ... } ( return <+...x...+>; | * return ...; ) } ...> ( E2 = x; | of_node_put(x); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01ns83820: Use helper to disable chip interruptsDenis Kirjanov
Use helper routine to disable chip interrupts. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 08:51:18 +0000