summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-07-22Merge branches 'roccat', 'upstream' and 'wiimote' into for-linusJiri Kosina
2011-07-22HID: fix support for Microsoft comfort mouse 4500Jiri Kosina
Add forgotten entry into the global blacklist. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-21HID: hid-multitouch: add one new multitouch device's VID/PIDice chien
This patch adds support for the CSR panel built by XAT. Signed-off-by: Ice Chien <ice.chien@accupoint.com.tw> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-21HID: prodikeys: remove a redundant forward declaration of struct pcmidi_sndAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-21HID: prodikeys: make needlessly global symbols staticAxel Lin
The following symbols are not referenced outside this file so there's no need for it to be in the global name space. pcmidi_sustained_note_release init_sustain_timers stop_sustain_timers pcmidi_handle_report pcmidi_setup_extra_keys pcmidi_snd_initialise pcmidi_snd_terminate Make them static. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-20HID: emsff: properly handle emsff_init failureAxel Lin
emsff_init() may fail, let's properly handle the failure. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-14HID: ACRUX - add missing hid_hw_stop() in ax_probe() error pathAxel Lin
hid_hw_stop() must be called in ax_probe() error path if hid_hw_start() was successful. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-12HID: fix horizontal wheel for ms comfort mouse 4500Ari Savolainen
Microsoft comfort mouse 4500 report descriptor contains duplicate usages for horizontal wheel. This patch fixes the wrong mapping caused by that. Signed-off-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: uclogic: Add support for UC-Logic WP1062Nikolai Kondrashov
Add support for UC-Logic Tablet WP1062 by fixing its report descriptor. This tablet is sold as Monoprice 10X6.25 Inches Graphic Drawing Tablet. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add sysfs support to wiimote driverDavid Herrmann
Add sysfs files for each led of the wiimote. Writing 1 to the file enables the led and 0 disables the led. We do not need memory barriers when checking wdata->ready since we use a spinlock directly after it. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Cache wiimote led stateDavid Herrmann
Save the current state of the leds in the wiimote data structure. This allows us to discard new led requests that wouldn't change anything. Protect the whole state structure by a spinlock. Every wiiproto_* function expects this spinlock to be held when called. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote led requestDavid Herrmann
Add new request that sets the leds on the target device. Also, per default, set led1 after initializing a device. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote input button parserDavid Herrmann
Parse input report 0x30 from the wiimote as button input. We need to send events for all buttons on every input report because the wiimote does not send events for single buttons but always for all buttons to us. The input layer, however, filters redundant events. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote event handlerDavid Herrmann
Create array of all event handlers and call each handler when we receive the related event. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add output queue for wiimote driverDavid Herrmann
The raw hid output function that is supported by bluetooth low-level hid driver does not provide an output queue and also may sleep. The wiimote driver, though, may need to send data in atomic context so this patch adds a buffered output queue for the wiimote driver. We use the shared workqueue to send our buffer to the hid device. There is always only one active worker which flushes the whole output queue to the device. If our queue is full, every further output is discarded. Special care is needed in the deinitialization routine. When wiimote_hid_remove is called, HID input is already disabled, but HID output may still be used from our worker and is then discarded by the lower HID layers. Therefore, we can safely disable the input layer since it is the only layer that still sends input events. Future sysfs attributes must be freed before unregistering input to avoid the sysfs handlers to send input events to a non-existing input layer. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote send functionDavid Herrmann
The wiimote driver needs to send raw output reports to the wiimote device. Otherwise we could not manage the peripherals of the wiimote or perform memory operations on the wiimote. We cannot use hidinput_input_event of the lowlevel hid driver, since this does not accept raw input. Therefore, we need to use the same function that hidraw uses to send output. Side effect is, the raw output function is not buffered and can sleep. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Synchronize wiimote input and hid event handlingDavid Herrmann
The wiimote first starts HID hardware and then registers the input device. We need to synchronize the startup so no event handler will start parsing events when the wiimote device is not ready, yet. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Register input device in wiimote hid driverDavid Herrmann
Register input device so the wiimote can report input events on it. We do not use HIDINPUT because the wiimote does not provide any descriptor table which might be used by HIDINPUT. So we avoid having HIDINPUT parse the wiimote descriptor and create unrelated or unknown event flags. Instead we register our own input device that we have full control of. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote device structureDavid Herrmann
Allocate wiimote device structure with all wiimote related data when registering new wiimote devices. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Register wiimote hid driver stubDavid Herrmann
The wiimote uses a fake HID protocol. Hence, we need to prevent HIDINPUT and HIDDEV from parsing wiimote data and instead parse raw hid events. Add VID/PID to hid-core so the special driver is loaded on new wiimotes. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add Nintendo Wii Remote driver stubDavid Herrmann
Add stub driver for the Nintendo Wii Remote. The wii remote uses the HID protocol to communicate with the host over bluetooth. Hence, add dependency for HIDP and place driver in hid subsystem. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-multitouch: add support for a new Lumio dual-touch panel HID: hid-multitouch: correct VID for Stantum panels HID: hid-multitouch: ensure slots are initialized
2011-06-27HID: add FF support for Holtek On Line Grip based gamepadsAnssi Hannula
Add force feedback support for Holtek On Line Grip based HID devices. The protocol is more complex than that of most other rumblepads, but the device still needs to be handled as a memoryless one. Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Cleber de Mattos Casali <clebercasali@yahoo.com.br> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-25Merge branch 'timer-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rtc: vt8500: Fix build error & cleanup rtc_class_ops->update_irq_enable() alarmtimers: Return -ENOTSUPP if no RTC device is present alarmtimers: Handle late rtc module loading
2011-06-24Merge branch 'drm-intel-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: save/resume forcewake lock fixes Revert "drm/i915: Kill GTT mappings when moving from GTT domain" drm/i915: Apply HWSTAM workaround for BSD ring on SandyBridge drm/i915: Call intel_enable_plane from i9xx_crtc_mode_set (again)
2011-06-24Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_marvell: Add support for 88SE91A0, 88SE91A4 libata/sas: only set FROZEN flag if new EH is supported libata: apply NOSETXFER horkage to the affected Pioneer drives regardless of firmware revision drivers/ata/sata_dwc_460ex: Fix typo 'corrresponding'
2011-06-24Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: handle special cases for vddc drm/radeon/kms: fix num_banks tiling config for fusion
2011-06-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6: tcm_fc: Fix conversion spec warning tcm_fc: Fix possible lock to unlock type deadlock tcm_fc: Fix ft_send_tm LUN lookup OOPs target: Fix incorrect strlen() NULL terminator checks target: Drop bogus ERR_PTR usage in target_fabric_configfs_init target: Fix ERR_PTR dereferencing bugs target: Convert transport_deregister_session_configfs nacl_sess_lock to save irq state target: Fix transport_get_lun_for_tmr failure cases [SCSI] target: Convert TASK_ATTR to scsi_tcq.h definitions [SCSI] target: Convert REPORT_LUNs to use int_to_scsilun [SCSI] target: Fix task->task_execute_queue=1 clear bug + LUN_RESET OOPs [SCSI] target: Fix bug with task_sg chained transport_free_dev_tasks release [SCSI] target: Fix interrupt context bug with stats_lock and core_tmr_alloc_req [SCSI] target: Fix multi task->task_sg[] chaining logic bug
2011-06-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI/ACPI: fix type mismatch PCI: fix new kernel-doc warning PCI: Fix warning in drivers/pci/probe.c on sparc64
2011-06-24HID: hid-multitouch: add support for a new Lumio dual-touch panelBenjamin Tissoires
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24HID: hid-multitouch: correct VID for Stantum panelsBenjamin Tissoires
while merging hid-stantum into hid-multitouch, I did not correctly copy/paste the VIDs for those devices. This patch fixes it. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24HID: hid-multitouch: ensure slots are initializedBenjamin Tissoires
In case a device does not provide the feature "Maximum Contact Count", or set it at 0, the maxcontacts field may be at 0 while calling input_mt_init_slots. This patch ensures that hid-multitouch will allways report ABS_MT_SLOT and ABS_MT_TRACKING_ID to the user space. This corrects a bug found with some Ilitek devices that has been integrated in 3.0-rc0. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24pata_marvell: Add support for 88SE91A0, 88SE91A4Paweł Drewniak
This patch enables support for Marvell IDE PATA controllers found on Asus P8P67LE motherboard. The formatting has been corrected and I also received a report from two users of this motherboard that the patch works. Signed-off-by: Paweł Drewniak <czajernia@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-06-24drm/radeon/kms: handle special cases for vddcAlex Deucher
A voltage value of 0xff01 requires that the driver look up the max voltage for the board based using the atom SetVoltage command table. Setting the proper voltage should fix stability on some newer asics. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-24drm/radeon/kms: fix num_banks tiling config for fusionAlex Deucher
The field is encoded: 0 = 4 banks 1 = 8 banks 2 = 16 banks Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-24tcm_fc: Fix conversion spec warningNicholas Bellinger
This patch fixes the following conversion specification warning for size_t drivers/target/tcm_fc/tfc_io.c: In function ‘ft_queue_data_in’: drivers/target/tcm_fc/tfc_io.c:209: warning: format ‘%x’ expects type ‘unsigned int’, but argument 5 has type ‘size_t’ Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-06-24tcm_fc: Fix possible lock to unlock type deadlockDan Carpenter
There is a typo here, it should be an unlock instead of a lock. The original code will deadlock. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-06-24tcm_fc: Fix ft_send_tm LUN lookup OOPsKiran Patil
This patch fixes a bug in ft_send_tm() that was incorrectly calling ft_get_lun_for_cmd() -> transport_get_lun_for_cmd(), instead of using transport_get_lun_for_tmr() for the proper struct se_lun lookup that was triggering an OOPs in the se_cmd->tmr_req failure path. This patch fixes the issue by re-arranging the codepath where transport_get_lun_for_tmr() is called after tmr request is allocated and made it available as part of se_cmd. It also drops the now unnecessary ft_get_lun_for_cmd() unpacking code, and uses scsilun_to_int() directly ahead of transport_get_lun_for_cmd() and transport_get_lun_for_tmr() usage. Signed-off-by: Patil, Kiran <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-06-24target: Fix incorrect strlen() NULL terminator checksDan Carpenter
This patch fixes a number of cases in target core using an incorrectly if (strlen(foo) > SOME_MAX_SIZE) As strlen() returns the number of characters in the string not counting the NULL character at the end. So if you do something like: char buf[10]; if (strlen("0123456789") > 10) return -ETOOLONG; snprintf(buf, 10, "0123456789"); printf("%s\n", buf); then the last "9" gets chopped off and only "012345678" is printed. Plus I threw in one small related cleanup. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-06-24target: Drop bogus ERR_PTR usage in target_fabric_configfs_initDan Carpenter
In the original code, there were several places inside the target_fabric_configfs_init() function that returned NULL on error and one place the returned an ERR_PTR. There are two places that call this function and they only check for NULL returns; they don't check for ERR_PTRs. So I've changed the ERR_PTR so now the function only returns NULL on error. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-06-24target: Fix ERR_PTR dereferencing bugsDan Carpenter
transport_init_session() and core_tmr_alloc_req() never return NULL, they only return ERR_PTRs on error. v2: Fix patch to return PTR_ERR(tl_nexus->se_sess) from Ankit Jain's feedback. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ankit Jain <jankit@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-06-23target: Convert transport_deregister_session_configfs nacl_sess_lock to save ↵Roland Dreier
irq state This patch converts transport_deregister_session_configfs() to save/restore spinlock IRQ state for struct se_node_acl->nacl_sess_lock access as tcm_qla2xxx logic expects to call transport_deregister_session_configfs() code with irq save already held for struct qla_hw_data. Reported-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-06-23target: Fix transport_get_lun_for_tmr failure casesNicholas Bellinger
This patch fixes two possible NULL pointer dereferences in target v4.0 code where se_tmr release path in core_tmr_release_req() can OOPs upon transport_get_lun_for_tmr() failure by attempting to access se_device or se_tmr->tmr_list without a valid member of se_device->tmr_list during transport_free_se_cmd() release. This patch moves the se_tmr->tmr_dev pointer assignment in transport_get_lun_for_tmr() until after possible -ENODEV failures during unpacked_lun lookup. This addresses an OOPs originally reported with LIO v4.1 upstream on .39 code here: TARGET_CORE[qla2xxx]: Detected NON_EXISTENT_LUN Access for 0x00000000 BUG: unable to handle kernel NULL pointer dereference at 0000000000000550 IP: [<ffffffff81035ec4>] __ticket_spin_trylock+0x4/0x20 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu23/cache/index2/shared_cpu_map CPU 1 Modules linked in: netconsole target_core_pscsi target_core_file tcm_qla2xxx target_core_iblock tcm_loop target_core_mod configfs ipmi_devintf ipmi_si ipmi_msghandler serio_raw i7core_edac ioatdma dca edac_core ps_bdrv ses enclosure usbhid usb_storage ahci qla2xxx hid uas e1000e mpt2sas libahci mlx4_core scsi_transport_fc scsi_transport_sas raid_class scsi_tgt [last unloaded: netconsole] Pid: 0, comm: kworker/0:0 Tainted: G W 2.6.39+ #1 Xyratex Storage Server RIP: 0010:[<ffffffff81035ec4>] [<ffffffff81035ec4>]__ticket_spin_trylock+0x4/0x20 RSP: 0018:ffff88063e803c08 EFLAGS: 00010286 RAX: ffff880619ab45e0 RBX: 0000000000000550 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000550 RBP: ffff88063e803c08 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000568 R13: 0000000000000001 R14: 0000000000000000 R15: ffff88060cd96a20 FS: 0000000000000000(0000) GS:ffff88063e800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000550 CR3: 0000000001a03000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/0:0 (pid: 0, threadinfo ffff880619ab8000, task ffff880619ab45e0) Stack: ffff88063e803c28 ffffffff812cf039 0000000000000550 0000000000000568 ffff88063e803c58 ffffffff8157071e ffffffffa028a1dc ffff88060f7e4600 0000000000000550 ffff880616961480 ffff88063e803c78 ffffffffa028a1dc Call Trace: <IRQ> [<ffffffff812cf039>] do_raw_spin_trylock+0x19/0x50 [<ffffffff8157071e>] _raw_spin_lock+0x3e/0x70 [<ffffffffa028a1dc>] ? core_tmr_release_req+0x2c/0x60 [target_core_mod] [<ffffffffa028a1dc>] core_tmr_release_req+0x2c/0x60 [target_core_mod] [<ffffffffa028d0d2>] transport_free_se_cmd+0x22/0x50 [target_core_mod] [<ffffffffa028d120>] transport_release_cmd_to_pool+0x20/0x40 [target_core_mod] [<ffffffffa028e525>] transport_generic_free_cmd+0xa5/0xb0 [target_core_mod] [<ffffffffa0147cc4>] tcm_qla2xxx_handle_tmr+0xc4/0xd0 [tcm_qla2xxx] [<ffffffffa0191ba3>] __qla24xx_handle_abts+0xd3/0x150 [qla2xxx] [<ffffffffa0197651>] qla_tgt_response_pkt+0x171/0x520 [qla2xxx] [<ffffffffa0197a2d>] qla_tgt_response_pkt_all_vps+0x2d/0x220 [qla2xxx] [<ffffffffa0171dd3>] qla24xx_process_response_queue+0x1a3/0x670 [qla2xxx] [<ffffffffa0196281>] ? qla24xx_atio_pkt+0x81/0x120 [qla2xxx] [<ffffffffa0174025>] ? qla24xx_msix_default+0x45/0x2a0 [qla2xxx] [<ffffffffa0174198>] qla24xx_msix_default+0x1b8/0x2a0 [qla2xxx] [<ffffffff810dadb4>] handle_irq_event_percpu+0x54/0x210 [<ffffffff810dafb8>] handle_irq_event+0x48/0x70 [<ffffffff810dd5ee>] ? handle_edge_irq+0x1e/0x110 [<ffffffff810dd647>] handle_edge_irq+0x77/0x110 [<ffffffff8100d362>] handle_irq+0x22/0x40 [<ffffffff8157b28d>] do_IRQ+0x5d/0xe0 [<ffffffff81571413>] common_interrupt+0x13/0x13 <EOI> [<ffffffff813003f7>] ? intel_idle+0xd7/0x130 [<ffffffff813003f0>] ? intel_idle+0xd0/0x130 [<ffffffff8144832b>] cpuidle_idle_call+0xab/0x1c0 [<ffffffff8100a26b>] cpu_idle+0xab/0xf0 [<ffffffff81566c59>] start_secondary+0x1cb/0x1d2 Reported-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-06-23rtc: vt8500: Fix build error & cleanup rtc_class_ops->update_irq_enable()Alexey Charkov
Now that the generic code handles UIE mode irqs via periodic alarm interrupts, no one calls the rtc_class_ops->update_irq_enable() method anymore. Further the rtc_class_ops doesn't have a update_irq_enable element anymore, so this causes a build error. This patch removes the driver hooks and implementations of update_irq_enable and the associated setup. [wsa: updated commit-message and removed update_irq_enable-function, too] [jstultz: improve commit message, clarifying build issue] Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-06-23libata/sas: only set FROZEN flag if new EH is supportedNishanth Aravamudan
On 16.06.2011 [08:28:39 -0500], Brian King wrote: > On 06/16/2011 02:51 AM, Tejun Heo wrote: > > On Wed, Jun 15, 2011 at 04:34:17PM -0700, Nishanth Aravamudan wrote: > >>> That looks like the right thing to do. For ipr's usage of > >>> libata, we don't have the concept of a port frozen state, so this flag > >>> should really never get set. The alternate way to fix this would be to > >>> only set ATA_PFLAG_FROZEN in ata_port_alloc if ap->ops->error_handler > >>> is not NULL. > >> > >> It seemed like ipr is as you say, but I wasn't sure if it was > >> appropriate to make the change above in the common libata-scis code or > >> not. I don't want to break some other device on accident. > >> > >> Also, I tried your suggestion, but I don't think that can happen in > >> ata_port_alloc? ata_port_alloc is allocated ap itself, and it seems like > >> ap->ops typically gets set only after ata_port_alloc returns? > > > > Maybe we can test error_handler in ata_sas_port_start()? > > Good point. Since libsas is converted to the new eh now, we would need to have > this test. Commit 7b3a24c57d2eeda8dba9c205342b12689c4679f9 ("ahci: don't enable port irq before handler is registered") caused a regression for CD-ROMs attached to the IPR SATA bus on Power machines: ata_port_alloc: ENTER ata_port_probe: ata1: bus probe begin ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: limiting speed to UDMA7:PIO5 ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: disabled ata_port_probe: ata1: bus probe end scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured The FROZEN flag added in that commit is only cleared by the new EH code, which is not used by ipr. Clear this flag in the SAS code if we don't support new EH. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-06-23libata: apply NOSETXFER horkage to the affected Pioneer drivesTejun Heo
regardless of firmware revision It's unlikely NOSETXFER works for a revision of drive but doesn't for another and pioneer doesn't seem to be fixing firmwares for the affected drives. Apply NOSETXFER to the affected pioneer drives regardless of firmware revision. http://article.gmane.org/gmane.linux.ide/49734 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: fl-00@gmx.de Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-06-23drivers/ata/sata_dwc_460ex: Fix typo 'corrresponding'Justin P. Mattock
The patch below fixes a typo. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-06-23serial: mrst_max3110: initialize waitqueue earlierMika Westerberg
The driver went to initialize its waitqueue at the start of the main processing thread. However, it is possible that this thread is not scheduled on a CPU before the write function is called which leads to a following error: BUG: spinlock bad magic on CPU#1, swapper/1 lock: f5f3ebdc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 Pid: 1, comm: swapper Not tainted 3.0.0-rc2+ #67 Call Trace: [<c1289663>] spin_bug+0xa3/0xf0 [<c12897ad>] do_raw_spin_lock+0x7d/0x150 [<c14963de>] _raw_spin_lock_irqsave+0x4e/0x60 [<c102f2bb>] __wake_up+0x1b/0x50 [<c12d3715>] serial_m3110_con_write+0x55/0x60 [<c1041575>] __call_console_drivers+0x75/0x90 [<c10415d9>] _call_console_drivers+0x49/0x80 [<c1041baa>] console_unlock+0xca/0x1f0 [<c10420ef>] vprintk+0x18f/0x4f0 [<c14928a3>] printk+0x18/0x1a [<c1042730>] register_console+0x2e0/0x350 [<c12d098e>] uart_add_one_port+0x33e/0x3d0 [<c1485ba6>] serial_m3110_probe+0x1c2/0x1df [<c1303db7>] spi_drv_probe+0x17/0x20 ... Fix this by initializing the waitqueue before the main thread is created. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-23mrst_max3110: Change max missing message priority.William Douglas
Change print message to notice instead of error to clean up non critical messages showing on startup. The MAX3111 not being present is a normal path for end user systems. Signed-off-by: William Douglas <william.douglas@intel.com> [rebased on 3.0, switched to dev_dbg()] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-22Merge branch 'pm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PCI / PM: Block races between runtime PM and system sleep PM / Domains: Update documentation PM / Runtime: Handle clocks correctly if CONFIG_PM_RUNTIME is unset PM: Fix async resume following suspend failure PM: Free memory bitmaps if opening /dev/snapshot fails PM: Rename dev_pm_info.in_suspend to is_prepared PM: Update documentation regarding sysdevs PM / Runtime: Update doc: usage count no longer incremented across system PM
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-19 19:00:01 +0000