summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2013-09-25NFC: pn533: Target mode Tx fragmentation supportOlivier Guiter
In target mode, when we want to send frames larger than the max length (PN533_CMD_DATAEXCH_DATA_MAXLEN), we have to split the frame in smaller chunks and send them, using a specific working queue, with the TgSetMetaData command. TgSetMetaData sets his own MI bit in the PFB. The last chunk is sent using the TgSetData command. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Add support for incoming fragmented frame in target modeOlivier Guiter
This code processes, for Target Mode, incoming fragmented frames. If the MI bit is present, we start a working queue to grab and aggregate all the parts (using TmGetData between each parts). On the last one, as there's no more MI bit, we jump on the usual behavior. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Add MI/TG bits only when in Initiator modeOlivier Guiter
The fragmentation routine (used to split big frames) could be used in target or initiator mode (TgSetMetaData vs InDataExchange), but the MI/TG bytes are not needed in target mode (TgSetMetaData), so we add a check on the mode Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Staticize local symbolsSachin Kamat
Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: nfcwilink: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Cc: Ilan Elias <ilane@ti.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Start listen timer from start_pollSamuel Ortiz
If we start the polling loop from a listening cycle, we need to start the corresponding timer as well. This bug showed up after commit dfccd0f5 as it was impossible to start from a listening cycle before it. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Send ATR_REQ directly for active device detectionSamuel Ortiz
In order to improve active devices detection, we send an ATR_REQ between each passive detection cycle. Without this algorithm, Android 4.3 based devices running the Broadcom stack are hardly detected. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: Standardize logging styleJoe Perches
Use standardized styles to minimize coding defects. Always use nfc_<level> where feasible. Add \n to formats where appropriate. Typo "it it" correction. Add #define pr_fmt where appropriate. Remove function tracing logging messages. Remove OOM messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: Convert nfc_dev_info and nfc_dev_err to nfc_<level>Joe Perches
Use a more standard kernel style macro logging name. Standardize the spacing of the "NFC: " prefix. Add \n to uses, remove from macro. Fix the defective uses that already had a \n. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: Replace nfc_dev_dbg with dev_dbgJoe Perches
Use the generic kernel function instead of a home-grown one that does the same thing. Add \n to uses not at the macro. Don't add \n where the nfc_dev_dbg macro mistakenly had them already. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn544: Add SE enable/disable operationArron Wang
To enable the UICC secure element, we first enable the UICC gate list in order for the SE to be able to use all RF technologies. For the embedded SE, we just turn the eSE default mode to ON. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn544: Add SE discover operationArron Wang
For the SWP secure element, we send the proprietary SELF_TEST_SWP command and check the response. For the WI secure element, we simply try to switch to the default embedded SE mode. If that works, it means we have an embedded SE. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) If the local_df boolean is set on an SKB we have to allocate a unique ID even if IP_DF is set in the ipv4 headers, from Ansis Atteka. 2) Some fixups for the new chipset support that went into the sfc driver, from Ben Hutchings. 3) Because SCTP bypasses a good chunk of, and actually duplicates, the logic of the ipv6 output path, some IPSEC things don't get done properly. Integrate SCTP better into the ipv6 output path so that these problems are fixed and such issues don't get missed in the future either. From Daniel Borkmann. 4) Fix skge regressions added by the DMA mapping error return checking added in v3.10, from Mikulas Patocka. 5) Kill some more IRQF_DISABLED references, from Michael Opdenacker. 6) Fix races and deadlocks in the bridging code, from Hong Zhiguo. 7) Fix error handling in tun_set_iff(), in particular don't leak resources. From Jason Wang. 8) Prevent format-string injection into xen-netback driver, from Kees Cook. 9) Fix regression added to netpoll ARP packet handling, in particular check for the right ETH_P_ARP protocol code. From Sonic Zhang. 10) Try to deal with AMD IOMMU errors when using r8169 chips, from Francois Romieu. 11) Cure freezes due to recent changes in the rt2x00 wireless driver, from Stanislaw Gruszka. 12) Don't do SPI transfers (which can sleep) in interrupt context in cw1200 driver, from Solomon Peachy. 13) Fix LEDs handling bug in 5720 tg3 chips already handled for 5719. From Nithin Sujir. 14) Make xen_netbk_count_skb_slots() count the actual number of slots that will be used, taking into consideration packing and other issues that the transmit path will run into. From David Vrabel. 15) Use the correct maximum age when calculating the bridge message_age_timer, from Chris Healy. 16) Get rid of memory leaks in mcs7780 IRDA driver, from Alexey Khoroshilov. 17) Netfilter conntrack extensions were converted to RCU but are not always freed properly using kfree_rcu(). Fix from Michal Kubecek. 18) VF reset recovery not being done correctly in qlcnic driver, from Manish Chopra. 19) Fix inverted test in ATM nicstar driver, from Andy Shevchenko. 20) Missing workqueue destroy in cxgb4 error handling, from Wei Yang. 21) Internal switch not initialized properly in bgmac driver, from Rafał Miłecki. 22) Netlink messages report wrong local and remote addresses in IPv6 tunneling, from Ding Zhi. 23) ICMP redirects should not generate socket errors in DCCP and SCTP. We're still working out how this should be handled for RAW and UDP sockets. From Daniel Borkmann and Duan Jiong. 24) We've had several bugs wherein the network namespace's loopback device gets accessed after it is free'd, NULL it out so that we can catch these problems more readily. From Eric W Biederman. 25) Fix regression in TCP RTO calculations, from Neal Cardwell. 26) Fix too early free of xen-netback network device when VIFs still exist. From Paul Durrant. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) netconsole: fix a deadlock with rtnl and netconsole's mutex netpoll: fix NULL pointer dereference in netpoll_cleanup skge: fix broken driver ip: generate unique IP identificator if local fragmentation is allowed ip: use ip_hdr() in __ip_make_skb() to retrieve IP header xen-netback: Don't destroy the netdev until the vif is shut down net:dccp: do not report ICMP redirects to user space cnic: Fix crash in cnic_bnx2x_service_kcq() bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions. vxlan: Avoid creating fdb entry with NULL destination tcp: fix RTO calculated from cached RTT drivers: net: phy: cicada.c: clears warning Use #include <linux/io.h> instead of <asm/io.h> net loopback: Set loopback_dev to NULL when freed batman-adv: set the TAG flag for the vid passed to BLA netfilter: nfnetlink_queue: use network skb for sequence adjustment net: sctp: rfc4443: do not report ICMP redirects to user space net: usb: cdc_ether: use usb.h macros whenever possible net: usb: cdc_ether: fix checkpatch errors and warnings net: usb: cdc_ether: Use wwan interface for Telit modules ip6_tunnels: raddr and laddr are inverted in nl msg ...
2013-09-19netconsole: fix a deadlock with rtnl and netconsole's mutexNikolay Aleksandrov
This bug was introduced by commit 7a163bfb7ce50895bbe67300ea610d31b9c09230 ("netconsole: avoid a crash with multiple sysfs writers"). In store_enabled() we have the following sequence: acquire nt->mutex then rtnl, but in the netconsole netdev notifier we have rtnl then nt->mutex effectively leading to a deadlock. The NULL pointer dereference that the above commit tries to fix is actually due to another bug in netpoll_cleanup(). This is fixed by dropping the mutex from the netdev notifier as it's already protected by rtnl. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19skge: fix broken driverMikulas Patocka
The patch 136d8f377e1575463b47840bc5f1b22d94bf8f63 broke the skge driver. Note this part of the patch: + if (skge_rx_setup(skge, e, nskb, skge->rx_buf_size) < 0) { + dev_kfree_skb(nskb); + goto resubmit; + } + pci_unmap_single(skge->hw->pdev, dma_unmap_addr(e, mapaddr), dma_unmap_len(e, maplen), PCI_DMA_FROMDEVICE); skb = e->skb; prefetch(skb->data); - skge_rx_setup(skge, e, nskb, skge->rx_buf_size); The function skge_rx_setup modifies e->skb to point to the new skb. Thus, after this change, the new buffer, not the old, is returned to the networking stack. This bug is present in kernels 3.11, 3.11.1 and 3.12-rc1. The patch should be queued for 3.11-stable. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Vasiliy Glazov <vascom2@gmail.com> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19ip: generate unique IP identificator if local fragmentation is allowedAnsis Atteka
If local fragmentation is allowed, then ip_select_ident() and ip_select_ident_more() need to generate unique IDs to ensure correct defragmentation on the peer. For example, if IPsec (tunnel mode) has to encrypt large skbs that have local_df bit set, then all IP fragments that belonged to different ESP datagrams would have used the same identificator. If one of these IP fragments would get lost or reordered, then peer could possibly stitch together wrong IP fragments that did not belong to the same datagram. This would lead to a packet loss or data corruption. Signed-off-by: Ansis Atteka <aatteka@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19xen-netback: Don't destroy the netdev until the vif is shut downPaul Durrant
Without this patch, if a frontend cycles through states Closing and Closed (which Windows frontends need to do) then the netdev will be destroyed and requires re-invocation of hotplug scripts to restore state before the frontend can move to Connected. Thus when udev is not in use the backend gets stuck in InitWait. With this patch, the netdev is left alone whilst the backend is still online and is only de-registered and freed just prior to destroying the vif (which is also nicely symmetrical with the netdev allocation and registration being done during probe) so no re-invocation of hotplug scripts is required. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: - Minor updates and fixes to the Octeon ethernet driver in staging - A fix to VGA_MAP_MEM() for 64 bit platforms - Fix a workaround for 74K/1074K processors - The symlink arch/mips/boot/dts/include/dt-bindings was pointing to a a file with a name ending in \n. I think this may have been caused by a git bug with with patches sent by email - A build fix for VGA console on BCM1480-based systems - Fix PCI device access via "/sys/bus/pci/.../resource0" or similar work for Alchemy platforms - Fix potential data leak on MIPS R5 cores. This doesn't add proper support for any R5 features, just ensures a kernel without such support will be secure to run - Adding a macros for the CP0 Config5 register to be used by the R5 fix - Make get_cycles() actually return something useful where possible This also requires a preparatory patch for performance sake - Fix a warning about the use of smp_processor_id() in preemptible code. Again this includes a preparatory patch adding the infrastructure to be used by the actual patch - Finally remove pointless one-line comment * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix invalid symbolic link file MIPS: PCI: pci-bcm1480: Include missing vt.h header MIPS: Disable usermode switching of the FR bit for MIPS R5 CPUs. MIPS: Add MIPS R5 config5 register. MIPS: PCI: Use pci_resource_to_user to map pci memory space properly MIPS: 74K/1074K: Correct erratum workaround. MIPS: Cleanup CP0 PRId and CP1 FPIR register access masks MIPS: Remove useless comment about kprobe from arch/mips/Makefile MIPS: Fix VGA_MAP_MEM macro. MIPS: Reimplement get_cycles(). MIPS: Optimize current_cpu_type() for better code. MIPS: Fix accessing to per-cpu data when flushing the cache MIPS: Provide nice way to access boot CPU's data. staging: octeon-ethernet: rgmii: enable interrupts that we can handle staging: octeon-ethernet: remove skb alloc failure warnings staging: octeon-ethernet: make dropped packets to consume NAPI budget
2013-09-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph fixes from Sage Weil: "These fix several bugs with RBD from 3.11 that didn't get tested in time for the merge window: some error handling, a use-after-free, and a sequencing issue when unmapping and image races with a notify operation. There is also a patch fixing a problem with the new ceph + fscache code that just went in" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: fscache: check consistency does not decrement refcount rbd: fix error handling from rbd_snap_name() rbd: ignore unmapped snapshots that no longer exist rbd: fix use-after free of rbd_dev->disk rbd: make rbd_obj_notify_ack() synchronous rbd: complete notifies before cleaning up osd_client and rbd_dev libceph: add function to ensure notifies are complete
2013-09-18Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm radeon/nouveau/core fixes from Dave Airlie: "Mostly radeon fixes, with some nouveau bios parser, ttm fix and a fix for AST driver" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (42 commits) drm/fb-helper: don't sleep for screen unblank when an oops is in progress drm, ttm Fix uninitialized warning drm/ttm: fix the tt_populated check in ttm_tt_destroy() drm/nouveau/ttm: prevent double-free in nouveau_sgdma_create_ttm() failure path drm/nouveau/bios/init: fix thinko in INIT_CONFIGURE_MEM drm/nouveau/kms: enable for non-vga pci classes drm/nouveau/bios/init: stub opcode 0xaa drm/radeon: avoid UVD corruptions on AGP cards drm/radeon: fix panel scaling with eDP and LVDS bridges drm/radeon/dpm: rework auto performance level enable drm/radeon: Fix hmdi typo drm/radeon/dpm/rs780: fix force_performance state for same sclks drm/radeon/dpm/rs780: don't enable sclk scaling if not required drm/radeon/dpm/rs780: add some sanity checking to sclk scaling drm/radeon/dpm/rs780: use drm_mode_vrefresh() drm/udl: rip out set_need_resched drm/ast: fix the ast open key function drm/radeon/dpm: add bapm callback for kb/kv drm/radeon/dpm: add bapm callback for trinity drm/radeon/dpm: add infrastructure to properly handle bapm ...
2013-09-19drm/fb-helper: don't sleep for screen unblank when an oops is in progressDaniel Vetter
Otherwise the system will burn even brighter and worse, leave the user wondering what's going on exactly. Since we already have a panic handler which will (try) to restore the entire fbdev console mode, we can just bail out. Inspired by a patch from Konstantin Khlebnikov. The callchain leading to this, cut&pasted from Konstantin's original patch: callstack: panic() bust_spinlocks(1) unblank_screen() vc->vc_sw->con_blank() fbcon_blank() fb_blank() info->fbops->fb_blank() drm_fb_helper_blank() drm_fb_helper_dpms() drm_modeset_lock_all() mutex_lock(&dev->mode_config.mutex) Note that the entire locking in the fb helper around panic/sysrq and kdbg is ... non-existant. So we have a decent change of blowing up everything. But since reworking this ties in with funny concepts like the fbdev notifier chain or the impressive things which happen around console_lock while oopsing, I'll leave that as an exercise for braver souls than me. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-19drm, ttm Fix uninitialized warningPrarit Bhargava
Fix uninitialized warning. drivers/gpu/drm/ttm/ttm_object.c: In function ‘ttm_base_object_lookup’: drivers/gpu/drm/ttm/ttm_object.c:213:10: error: ‘base’ may be used uninitialized in this function [-Werror=maybe-uninitialized] kref_put(&base->refcount, ttm_release_base); ^ drivers/gpu/drm/ttm/ttm_object.c:221:26: note: ‘base’ was declared here struct ttm_base_object *base; Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-19drm/ttm: fix the tt_populated check in ttm_tt_destroy()Ben Skeggs
After a vmalloc failure in ttm_dma_tt_alloc_page_directory(), ttm_dma_tt_init() will call ttm_tt_destroy() to cleanup, and end up inside the driver's unpopulate() hook when populate() has never yet been called. On nouveau, the first issue to be hit because of this is that dma_address[] may be a NULL pointer. After working around this, ttm_pool_unpopulate() may potentially hit the same issue with the pages[] array. It seems to make more sense to avoid calling unpopulate on already unpopulated TTMs than to add checks to all the implementations. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-19Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes A couple of bios parser fixes (one for ancient chips, another for new ones - important in Optimus configs). Another to make sure KMS is enabled on certain Optimus configs, and a TTM failure path fix. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/ttm: prevent double-free in nouveau_sgdma_create_ttm() failure path drm/nouveau/bios/init: fix thinko in INIT_CONFIGURE_MEM drm/nouveau/kms: enable for non-vga pci classes drm/nouveau/bios/init: stub opcode 0xaa
2013-09-18cnic: Fix crash in cnic_bnx2x_service_kcq()Michael Chan
commit 104a43edb264321a4d41850e98153b4fa8a9ef42 cnic: Use CHIP_NUM macros from bnx2x.h changed the code to use the bnx2x macro NO_FCOE() to determine if FCoE is supported or not. There is another place in cnic that is still using the old method to determine if FCoE is supported or not. The 2 methods may not yield the same result after the network interface is brought down and up. This will cause the crash as cnic_bnx2x_service_kcq() will access the uninitialized cp->kcq2. The fix is to consistently use the same macro CNIC_SUPPORTS_FCOE() which uses the bnx2x NO_FCOE() macro. As a follow-up, we can clean up the code to remove the old method as it is no longer needed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-18bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions.Michael Chan
commit b9871bcfd211d316adee317608dab44c58d6ea2d bnx2x: VF RSS support - PF side changed the configuration of the doorbell HW and it broke iSCSI and FCoE. We fix this by making compatible changes to the doorbell address in bnx2i and bnx2fc. For the userspace driver, we need to pass a modified CID so that the existing userspace driver will calculate the correct doorbell address and continue to work. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "Fixes for CVE-2013-2897, CVE-2013-2895, CVE-2013-2897, CVE-2013-2894, CVE-2013-2893, CVE-2013-2891, CVE-2013-2890, CVE-2013-2889. All the bugs are triggerable only by specially crafted evil-on-purpose HW devices. Fixes by Kees Cook and Benjamin Tissoires" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: lenovo-tpkbd: fix leak if tpkbd_probe_tp fails HID: multitouch: validate indexes details HID: logitech-dj: validate output report details HID: validate feature and input report details HID: lenovo-tpkbd: validate output report details HID: LG: validate HID output report details HID: steelseries: validate output report details HID: sony: validate HID output report details HID: zeroplus: validate output report details HID: provide a helper for validating hid reports
2013-09-17tty: disassociate_ctty() sends the extra SIGCONTOleg Nesterov
Starting from v3.10 (probably commit f91e2590410b: "tty: Signal foreground group processes in hangup") disassociate_ctty() sends SIGCONT if tty && on_exit. This breaks LSB test-suite, in particular test8 in _exit.c and test40 in sigcon5.c. Put the "!on_exit" check back to restore the old behaviour. Review by Peter Hurley: "Yes, this regression was introduced by me in that commit. The effect of the regression is that ptys will receive a SIGCONT when, in similar circumstances, ttys would not. The fact that two test vectors accidentally tripped over this regression suggests that some other apps may as well. Thanks for catching this" Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Karel Srot <ksrot@redhat.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-17vxlan: Avoid creating fdb entry with NULL destinationSridhar Samudrala
Commit afbd8bae9c798c5cdbe4439d3a50536b5438247c vxlan: add implicit fdb entry for default destination creates an implicit fdb entry for default destination. This results in an invalid fdb entry if default destination is not specified. For ex: ip link add vxlan1 type vxlan id 100 creates the following fdb entry 00:00:00:00:00:00 dev vxlan1 dst 0.0.0.0 self permanent This patch fixes this issue by creating an fdb entry only if a valid default destination is specified. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17drivers: net: phy: cicada.c: clears warning Use #include <linux/io.h> ↵Avinash Kumar
instead of <asm/io.h> clears following warnings : WARNING: Use include <linux/io.h> instead of <asm/io.h> WARNING: Use include <linux/uaccess.h> instead of <asm/uaccess.h> Signed-off-by: Avinash Kumar <avi.kp.137@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17net loopback: Set loopback_dev to NULL when freedEric W. Biederman
It has recently turned up that we have a number of long standing bugs in the network stack cleanup code with use of the loopback device after it has been freed that have not turned up because in most cases the storage allocated to the loopback device is not reused, when those accesses happen. Set looback_dev to NULL to trigger oopses instead of silent data corrupt when we hit this class of bug. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-18drm/nouveau/ttm: prevent double-free in nouveau_sgdma_create_ttm() failure pathBen Skeggs
TTM calls the destructor on its own already... Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-09-18drm/nouveau/bios/init: fix thinko in INIT_CONFIGURE_MEMBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-09-18drm/nouveau/kms: enable for non-vga pci classesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-09-18drm/nouveau/bios/init: stub opcode 0xaaBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-09-17staging: octeon-ethernet: rgmii: enable interrupts that we can handleAaro Koskinen
Enable only those interrupts that we can handle & acknowledge in the interrupt handler. At least on EdgeRouter Lite, the hardware may occasionally interrupt with some error condition when the physical link status changes frequently. Since the interrupt condition is not acked properly, this leads to the following warning and the IRQ gets disabled completely: [ 41.324700] eth0: Link down [ 44.324721] eth0: 1000 Mbps Full duplex, port 0, queue 0 [ 44.885590] irq 117: nobody cared (try booting with the "irqpoll" option) [ 44.892397] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-rc5-edge-los.git-27d042f-dirty-00950-gaa42f2d-dirty #8 [ 44.902825] Stack : ffffffff815c0000 0000000000000004 0000000000000003 0000000000000000 ffffffff81fd0000 ffffffff815c0000 0000000000000004 ffffffff8118530c ffffffff815c0000 ffffffff811858d8 0000000000000000 0000000000000000 ffffffff81fd0000 ffffffff81fc0000 ffffffff8152f3a0 ffffffff815b7bf7 ffffffff81fc6688 ffffffff815b8060 0000000000000000 0000000000000000 0000000000000000 ffffffff815346c8 ffffffff815346b0 ffffffff814a6a18 ffffffff8158b848 ffffffff81145614 ffffffff81593800 ffffffff81187174 ffffffff815b7d00 ffffffff8158b760 0000000000000000 ffffffff814a9184 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff811203b8 0000000000000000 0000000000000000 ... [ 44.968408] Call Trace: [ 44.970873] [<ffffffff811203b8>] show_stack+0x68/0x80 [ 44.975937] [<ffffffff814a9184>] dump_stack+0x78/0xb8 [ 44.980999] [<ffffffff811aac54>] __report_bad_irq+0x44/0x108 [ 44.986662] [<ffffffff811ab238>] note_interrupt+0x248/0x2a0 [ 44.992240] [<ffffffff811a85e4>] handle_irq_event_percpu+0x144/0x200 [ 44.998598] [<ffffffff811a86f4>] handle_irq_event+0x54/0x90 [ 45.004176] [<ffffffff811ab908>] handle_level_irq+0xd0/0x148 [ 45.009839] [<ffffffff811a7b04>] generic_handle_irq+0x34/0x50 [ 45.015589] [<ffffffff8111dae8>] do_IRQ+0x18/0x30 [ 45.020301] [<ffffffff8110486c>] plat_irq_dispatch+0x74/0xb8 [ 45.025958] [ 45.027451] handlers: [ 45.029731] [<ffffffff813fca10>] cvm_oct_rgmii_rml_interrupt [ 45.035397] Disabling IRQ #117 [ 45.038742] Port 0 receive error code 13, packet dropped [ 46.324719] eth0: Link down [ 48.324733] eth0: 1000 Mbps Full duplex, port 0, queue 0 Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-mips@linux-mips.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: richard@nod.at Patchwork: https://patchwork.linux-mips.org/patch/5810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-17staging: octeon-ethernet: remove skb alloc failure warningsAaro Koskinen
Remove skb allocation failure warnings. They will trigger a page allocation warning already. Also, one of the warnings was not ratelimited, causing the box to lock up under heavy traffic & low memory. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-mips@linux-mips.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: richard@nod.at Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: https://patchwork.linux-mips.org/patch/5811/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-17staging: octeon-ethernet: make dropped packets to consume NAPI budgetAaro Koskinen
We should count also dropped packets, otherwise the NAPI handler may end up running too long. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: richard@nod.at Patchwork: https://patchwork.linux-mips.org/patch/5809/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-16Merge branch 'sfc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller
Ben Hutchings says: ==================== Some bug fixes and future-proofing for the recently added SFC9120 support: 1. Minimal support for the 40G configuration. 2. Disable the incomplete PTP/hardware timestamping support. 3. Reset MAC stats properly after a firmware upgrade. 4. Re-check the datapath firmware capabilities after the controller is reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: usb: cdc_ether: use usb.h macros whenever possibleFabio Porcedda
Use USB_DEVICE_AND_INTERFACE_INFO and USB_VENDOR_AND_INTERFACE_INFO macros to reduce boilerplate. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: usb: cdc_ether: fix checkpatch errors and warningsFabio Porcedda
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: usb: cdc_ether: Use wwan interface for Telit modulesFabio Porcedda
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: <stable@vger.kernel.org> # 3.0+ as far back as it applies cleanly Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16bgmac: implement unaligned addressing for DMA rings that support itRafał Miłecki
This is important patch for new devices that support unaligned addressing. That devices suffer from the backward-compatibility bug in DMA engine. In theory we should be able to use old mechanism, but in practice DMA address seems to be randomly copied into status register when hardware reaches end of a ring. This breaks reading slot number from status register and we can't use DMA anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16bgmac: allow bigger et_swtype nvram variableHauke Mehrtens
Without this patch it is impossible to read et_swtype, because the 1 byte space is needed for the terminating null byte. The max expected value is 0xF, so now it should be possible to read decimal form ("15") and hex form ("0xF"). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16bgmac: fix internal switch initializationRafał Miłecki
Some devices (BCM4749, BCM5357, BCM53572) have internal switch that requires initialization. We already have code for this, but because of the typo in code it was never working. This resulted in network not working for some routers and possibility of soft-bricking them. Use correct bit for switch initialization and fix typo in the define. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16drivers/net/ethernet/ibm/ehea/ehea_main.c: add alias entry for portN propertiesOlaf Hering
Use separate table for alias entries in the ehea module, otherwise the probe() function will operate on the separate ports instead of the lhea-"root" entry of the device-tree Addresses https://bugzilla.novell.com/show_bug.cgi?id=435215 [ Thadeu notes that: "... this issue might happen with the generation of initrd, when the scripts check for /sys/class/net/eth0/device/modalias, which links to the port device at /sys/devices/ibmebus/23c00400.lhea/port0/" ] Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Olaf Hering <ohering@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16Merge branch 'timers/core' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer code update from Thomas Gleixner: - armada SoC clocksource overhaul with a trivial merge conflict - Minor improvements to various SoC clocksource drivers * 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding clocksource: armada-370-xp: Get reference fixed-clock by name clocksource: armada-370-xp: Replace WARN_ON with BUG_ON clocksource: armada-370-xp: Fix device-tree binding clocksource: armada-370-xp: Introduce new compatibles clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE clocksource: armada-370-xp: Simplify TIMER_CTRL register access clocksource: armada-370-xp: Use BIT() ARM: timer-sp: Set dynamic irq affinity ARM: nomadik: add dynamic irq flag to the timer clocksource: sh_cmt: 32-bit control register support clocksource: em_sti: Convert to devm_* managed helpers
2013-09-16Merge tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubiLinus Torvalds
Pull UBI fixes from Artem Bityutskiy: "Just a single fastmap fix plus a regression fix" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi: UBI: Fix invalidate_fastmap() UBI: Fix PEB leak in wear_leveling_worker()
2013-09-15cxgb4: remove workqueue when driver registration failsWei Yang
When driver registration fails, we need to clean up the resources allocated before. cxgb4 missed to destroy the workqueue allocated at the very beginning. This patch destroies the workqueue when registration fails. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-15isdn: hfcpci_softirq: get func return to suppress compiler warningAntonio Alecrim Jr
Signed-off-by: Antonio Alecrim Jr <antonio.alecrim@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 02:19:14 +0000