summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2013-10-01drm/i915: Program GMBUS Frequency based on the CDCLK for VLV.Chon Ming Lee
CDCLK is used to generate the gmbus clock. This is normally done by BIOS. Program the value if the BIOS-less system doesn't do it. v2: Move this to intel_i2c_reset to allow reprogram the gmbus frequency during resume. (Daniel) v3: Change GMBUS_FREQ to GMBUSFREQ_VLV, and use VLV_DISPLAY_BASE. (Ville). Remove cdclk_ratio[] table, and calculate the cdclk ratio instead. (Ville). Change the shift then mask for reg read, to mask first, then shift. (Ville). Remove the gmbus frequency calculation = cdclk/1.01. Based on BIOS programming, gmbus frequency = cdclk frequency. (Ville) Add get_disp_clk_div, which can use to get cdclk/czclk divide. v4: Fix the mmio_offset base for CZCLK_CDCLK_FREQ_RATIO, gmbus_freq calculation, and duplicate check for gmbus_freq. (Ville) In VLV, the spec is wrong about 4Mhz reference frequency for GMBUS. It should be 1Mhz. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> [danvet: Add the comment Ville suggested. Also appease checkpatch a bit.] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915/vlv: hack to init backlight regs if BIOS fails to do so v2Jesse Barnes
Still digging up the actual VBT info for this, but wanted to get this out there for testing, or in case others are also bugged by this. This can happen if you boot with an external display connected. In that case, the attached eDP backlight modulation frequency may not be programmed, so we need to use something (in this case the value my BIOS normally programs with just the internal display enabled). v2: fix masking and magic value in read_blc_pwm_ctl (Jani) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67732 Tested-by: shui yangwei <yangweix.shui@intel.com> (v1) Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Allow stereo modes on HDMIDamien Lespiau
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Prefer crtc_{h|v}display for pipe src dimensionsDamien Lespiau
Now that we ask to adjust the crtc timings for stereo modes, the correct pipe_src_w and pipe_src_h can be found in crtc_vdisplay and crtc_hdisplay. v2: Add comment about why pipe_src_w/h need to be set afert set_crtcinfo() (Daniel Vetter) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Ask the DRM core do make stereo timings adjustementsDamien Lespiau
When scanning out big stereo buffers that are actually bigger that their natural 2D counterpart, we need to blow up the crtc timings as well. Not that this is only done for frame packing as this is the only stereo mode currently exposed needing this kind of ajdustements. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Use crtc_clock with the adjusted modeDamien Lespiau
struct drm_mode_display now has a separate crtc_ version of the clock to be used when we're talking about the timings given to the harwadre (was far as the mode is concerned). This commit is really the result of a git grep adjusted_mode.*clock and replacing those by adjusted_mode.crtc_clock. No functional change. v2: Rebased on drm-intel-queued-next Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Use crtc_clock in intel_dump_crtc_timings()Damien Lespiau
We want to dump the parameters given to the hardware, so let's use crtc_clock here. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Check the fb size against the adjusted v/hdisplay for stereo modesDamien Lespiau
Some stereo modes, like frame packing, need a larger CRTC viewport than the "natural" underlying 2D mode and thus drm_crtc_check_viewport() needs to query the adjusted mode to use the correct h/vdisplay. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Factor out common CRTC viewport checking codeDamien Lespiau
Both setcrtc and page_flip are checking that the framebuffer is big enough for the defined crtc viewport (x, y, hdisplay, vdisplay). Factor that code out in a single function. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Implement timings adjustments for frame packingDamien Lespiau
When using the frame packing and a single big framebuffer, some hardware requires that we do everything like if we were scanning out the big buffer itself. Let's instrument drm_mode_set_crtcinfo() to be able to do this adjustement if the driver is asking for it. v2: Use crtc_vtotal and multiply the clock by 2 instead of reconstructing it (Ville Syrjälä) Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Introduce a crtc_clock for struct drm_display_modeDamien Lespiau
Just like the various timings, make it possible to have a clock field what we can tweak before giving it to hardware. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Remove clock_index from struct drm_display_modeDamien Lespiau
This field was only accessed by the nouveau driver, but never set. So concluded we can rid of this one. Acked-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Make exposing stereo modes a per-connector opt-inDamien Lespiau
Just like with interlaced or double scan modes, make stereo modes a per-connector opt-in to give a chance to driver authors to make it work before enabling it. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Carry over the stereo flags when adding the alternate modeDamien Lespiau
This allows to expose the alternate clock versions of the stereo modes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Make drm_match_cea_mode() return the underlying 2D VIC for 3d modesDamien Lespiau
When scanning out a stereo mode, the AVI infoframe vic field has to be the underlyng 2D VIC. Before that commit, we weren't matching the CEA mode because of the extra stereo flag and then were setting the VIC field in the AVI infoframe to 0. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Set the relevant infoframe field when scanning out a 3D modeDamien Lespiau
When scanning out a 3D mode on HDMI, we need to send an HDMI infoframe with the corresponding layout to the sink. v2: Make s3d_structure_from_display_mode() less subtle (Ville Syrjälä) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Reject modes with more than 1 stereo flags setDamien Lespiau
When setting a stereo 3D mode, there can be only one bit set describing the layout of the frambuffer(s). So reject invalid modes early. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Extract add_hdmi_mode() out of do_hdmi_vsdb_modes()Damien Lespiau
So we respect a nice design of having similar functions at the same level, in this case: do_hdmi_vsdb_modes() - add_hdmi_mandatory_stereo_modes() - add_hdmi_mode() Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/edid: Expose mandatory stereo modes for HDMI sinksDamien Lespiau
For now, let's just look at the 3D_present flag of the CEA HDMI vendor block to detect if the sink supports a small list of then mandatory 3D formats. See the HDMI 1.4a 3D extraction for detail: http://www.hdmi.org/manufacturer/specification.aspx v2: Rename freq to vrefresh, make the mandatory structure a bit more compact, fix some white space issues and add a couple of const (Ville Syrjälä) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Add a STEREO_3D capability to the SET_CLIENT_CAP ioctlDamien Lespiau
This capability allows user space to control the delivery of modes with the 3D flags set. This is to not play games with current user space users not knowing anything about stereo 3D flags and that could try to set a mode with one or several of those bits set. So, the plan is to remove the stereo modes from the list of modes we give to DRM clients by default, and let them through if we are being told otherwise. stereo_allowed is bound to the drm_file structure to make it a per-client setting, not a global one. v2: Replace clearing 3D flags by discarding the stereo modes now that they are regular modes. v3: SET_CAP -> SET_CLIENT_CAP rename (Chris Wilson) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Add a SET_CLIENT_CAP ioctlDamien Lespiau
This ioctl can be used to turn some knobs in a DRM driver. The client can ask the DRM core for an alternate view of the reality: it can be useful to be able to instruct the core that the DRM client can handle new functionnality that would otherwise break current ABI. v2: Rename to ioctl from SET_CAP to SET_CLIENT_CAP (Chris Wilson) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915/vlv: fix up broken precision in vlv_crtc_clock_getChris Wilson
With some divider values we end up with the wrong result. So remove the intermediates (like Ville suggested in the first place) to get the right answer. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915/vlv: add VLV specific clock_get function v3Jesse Barnes
Calculation is a little different than other platforms. v2: update to use port_clock instead rebase on top of Ville's changes v3: update to new port_clock semantics - don't divide by pixel_multiplier (Ville) References: https://bugs.freedesktop.org/show_bug.cgi?id=67345 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Add a tracepoint for using a semaphoreChris Wilson
So that we can find the callers who introduce a ring stall. A single ring stall is not too unwelcome, the right issue becomes when they start to interlock and prevent any concurrent work. That, however, is a little tricker to detect with a mere tracepoint! v2: Rebrand it as a ring event, rather than an object event. v3: Include the seqno in the tracepoint for posterity or something. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Show WT caching in debugfsChris Wilson
Add the missing cache-level to the describe_obj() function for debug and error reporting. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Fix VLV eDP timing v2Chon Ming Lee
Fix the typo in previous commit for DP 1.62 divisor. drm/i915: Move Valleyview DP DPLL divisor calc to intel_dp_set_clock v2 v2: sigh, the m1 div is 3. Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Move the conditional seqno query into the tracepointChris Wilson
We only wish to know the value of seqno when emitting the tracepoint, so move the query from a parameter to the macro to inside the conditional macro body so that the query is only evaluated when required. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Convert active API to VMABen Widawsky
Even though we track object activity and not VMA, because we have the active_list be based on the VM, it makes the most sense to use VMAs in the APIs. NOTE: Daniel intends to eventually rip out active/inactive LRUs, but for now, leave them be. v2: Remove leftover hunk from the previous patch which didn't keep i915_gem_object_move_to_active. That patch had to rely on the ring to get the dev instead of the obj. (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Provide a cheap ggtt vma lookupBen Widawsky
"We do fairly often lookup the ggtt vma for an obj." - Chris Wilson. As such, provide a function to offer slightly cheaper access to the vma. Not performance tested. By my quick estimation it saves at least 3 pointer dereferences from the existing mechanism. This patch mostly matches code from Chris in <20130911221430.GB7825@nuc-i3427.alporthouse.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: trace vm eviction instead of everythingBen Widawsky
Tracing vm eviction is really the event we care about. For the cases we evict everything, we still will get the trace. v2: Add the drm device to the trace since we might not be the only device in the system. (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: remove "extern" keywords from intel_drv.h functionsPaulo Zanoni
Since I already reorganized the header file, Daniel requested me to remove those keywords. It seems "checkpath.pl --strict" also doesn't like "extern" on header files. At least now we're consistent :) Requested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: make hsw_{disable, restore}_lcpll staticPaulo Zanoni
These functions were added before the final PC8 implementation, and their callers moved to intel_display.c during the code review. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: make intel_crtc_fb_gamma_{set, get} staticPaulo Zanoni
By moving them to intel_fb.c. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: make intel_crtc_load_lut staticPaulo Zanoni
And move it so it doesn't need a forward declaration. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: make intel_pipe_has_type staticPaulo Zanoni
Also move it to the top of the file so we can remove the forward declaration. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: reorganize intel_drv.hPaulo Zanoni
Daniel complained that we keep adding stuff to the bottom of the file, so we constantly have conflicts. So reorganize everything and split them file-by-file, also sorting the files in alphabetical order. This way, patches touching different files will have a smaller chance of conflicting. Of course, this commit will conflict with everybody on the list :) Also remove a few useless comments and make some things fit into 80 lines. v2: - Conflict with intel_ddi_get_config Requested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: backlight combination mode bit is gen4 onlyJani Nikula
Not valid for later non-PCH split platforms such as VLV. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Add HSW CRT output readout supportVille Syrjälä
Call intel_ddi_get_config() to get the pipe_bpp settings from DDI. The sync polarity settings from DDI are irrelevant for CRT output, so override them with data from the ADPA register. v2: Extract intel_crt_get_flags() Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69691 Tested-by: Qingshuai Tian <qingshuai.tian@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: clean up and simplify i9xx_crtc_mode_set wrt PLL handlingJani Nikula
Flat out skip anything to do with PLL if we have a DSI encoder (and thus DSI PLL). Also skip PLL computation if the encoder has already set clocks. This allows for some tidying up of the code, including a superfluous call to intel_limit() for LVDS downclock path. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Add some debug spam for intialising SDVOChris Wilson
During SDVO initialisation it would be useful to a have a record of the individual devices we try to enable and later probe - in particular to be able to see which fail. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Delay the release of the forcewake by a jiffieChris Wilson
Obtaining the forcwake requires expensive and time consuming serialisation. And we often try to obtain the forcewake multiple times in very quick succession. We can reduce the overhead of these sequences by delaying the forcewake release, and so not hammer the hw quite so hard. I was hoping this would help with the spurious [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear. found on Haswell. Alas not. v2: Fix teardown ordering - unmap the regs after turning off forcewake, and make sure we do turn off forcewake - both found by Ville. v3: As we introduce intel_uncore_fini(), use it to make sure everything is disabled before we hand back to the BIOS. Note: I have no claims for improved performance, stablity or power comsumption for this patch. We should not be hitting the registers often enough for this to improve benchmarks, but given the nature of our hw it is likely to improve long term stability. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: precendence bug in GT_PARITY_ERROR()Dan Carpenter
The | operation has higher precedence than "?:" so the macro always returns GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1. This regression has been introduce in "drm/i915: Add second slice l3 remapping". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Fix intel_crtc_mode_get() mode clockVille Syrjälä
i9xx_crtc_clock_get() no longer populates adjusted_mode.clock, so we must get the pixel clock from port_clock in intel_crtc_mode_get(). This bug caused Chris's 845g machine to lockup during boot, and it was introduced in: commit 18442d08786472c63a0a80c27f92b033dffc26de Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Sep 13 16:00:08 2013 +0300 drm/i915: Fix port_clock and adjusted_mode.clock readout all over Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69713 Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Calculate PSR register offsets from base + genBen Widawsky
Future generations will be changing these registers (thanks to design for giving us an early heads up). To help abstract, create the definition of the base of the register block, and define all registers relative to that. Design has promised to not change the offsets relative to the base. v2: Also change IS_HASWELL checks to HAS_PSR CC: Rodrigo Vivi <rodrigo.vivi@gmail.com> CC: Intel GFX <intel-gfx@lists.freedesktop.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915/dp: read DPCD PSR capability only on eDPJani Nikula
Reduce AUX transactions for non-eDP. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Drop explicit plane restoration during resumeVille Syrjälä
We already restore planes during the modeset operation, so no need to do another loop over the planes and try to restore them again. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Call intel_uncore_early_sanitize() during resumeVille Syrjälä
Call intel_uncore_early_sanitize() first thing during resume to prevent stale BIOS leftovers from being reported as unclaimed register access. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Move power well resume earlierVille Syrjälä
i915_restore_state() -> i915_restore_display() will attempt to re-disable VGA during resume. So the power well needs to be powered on before that. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Move power well init earlier during driver loadVille Syrjälä
intel_modeset_init() will already attempt to disable VGA. In order to do that, it needs the power well to be on. So move the power well init to happen before intel_modeset_init() during driver load. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/i915: Redisable VGA before the modeset on resumeVille Syrjälä
The VGA plane needs to be disabled before we start doing any modeset operations on resume. This should also guarantee that the power well will be enabled when we call i915_redisable_vga() since it gets explicitly powered on during resume, and will get powered back off during the modeset operation if no longer needed. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-28 11:32:41 +0000