summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-07-01iwlagn: remove the indirection for the rx write pointerEmmanuel Grumbach
Not needed since the driver split. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: remove hcmd opsWey-Yi Guy
All "agn" devices use the same hcmd functions, no need to call indirectly. remove hcmd_ops Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: call bt_coex directllyWey-Yi Guy
Call the 2-wire and advanced bt-coex function directly to avoid mistake Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: scd memory boundaryWey-Yi Guy
Assign memory boundary for SCD context, tx status and translation table Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: move the tx allocation funcs to the transport layerEmmanuel Grumbach
These functions allocate all the Tx context. Only the simple tx_init is exported as API. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: add rx_free to transport layerEmmanuel Grumbach
The transport layer ness to release all rx ressources. This function is an API for it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: introduce transport layer and implement rx_initEmmanuel Grumbach
The transport layer is responsible for all the queues, DMA rings etc... This is the beginning of the separation of all the code that is tighly related to HW design to the aforementioned transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: add module parameter to disable stuck queue watchdog timerWey-Yi Guy
Add the parameter to disable stuck queue watchdog timer, different platforms might have different timing. Provide the option to disable the timer to prevent un-necessary firmware reload. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: add correct firmware name for 135 seriesWey-Yi Guy
135 series are WiFi/BT combo and require different uCode from 105 series. [A Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: re-define the testmode cmd and attr enumWey-Yi Guy
To make sure not having issues when adding new testmode commands or attributes in the future, re-define the enum. no functional changes Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: verify mutex held for sync commandsJohannes Berg
Emmanuel noticed that there's no explicit checking that prevents the driver from attempting to issue multiple synchronous commands at the same time and wrote a patch to check. However, his patch warns only if a collision actually happened, an unlikely thing since the driver mutex should be held for synchronous command submissions. So instead of checking that a collision happened add a check that the mutex is held which ensures that collisions can't happen. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-29rtlwifi: potential forever loop in rtl92de_hw_init()Dan Carpenter
"i" should be an int here because we are trying to use it to count to 10000. The original code looks like it could hang in a forever loop. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29rtlwifi: rtl8192de: Fix build errors when using allyes configurationLarry Finger
After adding rtl8192de to linux-next, making the rtlwifi drivers be built-in results in the following warnings: LD drivers/net/wireless/rtlwifi/built-in.o drivers/net/wireless/rtlwifi/rtl8192de/built-in.o: In function `rtl92ce_sw_led_on': (.text+0x11fb6): multiple definition of `rtl92ce_sw_led_on' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.text+0xa326): first defined here drivers/net/wireless/rtlwifi/rtl8192de/built-in.o:(.bss+0x0): multiple definition of `dm_digtable' drivers/net/wireless/rtlwifi/rtl8192c/built-in.o:(.bss+0x0): first defined here ld: Warning: size of symbol `dm_digtable' changed from 40 in drivers/net/wireless/rtlwifi/rtl8192c/built-in.o to 48 in drivers/net/wireless/rtlwifi/rtl8192de/built-in.o drivers/net/wireless/rtlwifi/rtl8192de/built-in.o: In function `rtl92ce_sw_led_off': (.text+0x11cfe): multiple definition of `rtl92ce_sw_led_off' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.text+0xa06e): first defined here Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: correct 0x2059 radio initRafał Miłecki
Sometimes additional steps are performed while initializing 2059 radio. We did not find the condition yet, so make it always true for now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29ath9k_htc: Add device ID for Sony UWA-BR100Mohammed Shafi Shajakhan
for more details please take a look at: http://comments.gmane.org/gmane.linux.drivers.ath9k.devel/6541 http://www.wikidevi.com/wiki/Sony_UWA-BR100 Reported-by: Thomas Novin <thomas@xyz.pp.se> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29ath9k: move few descriptor macros to ath9k.hMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: basic PHY initRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: add init tablesRafał Miłecki
They were written from observing MMIO writes to registers 0x72 0x74 and 0x73 right after phy_write(0x017e) <- 0x3830 which finishes chennel switching. RegExps were used to translate writes to arrays. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: init radio when enabling itRafał Miłecki
Masks and sets were found in MMIO dumps by using MMIO hacks. Shortly: radio_write(0x0c51) <- 0x0070 radio_write(0x0c5a) <- 0x0003 radio_write(0x0146) <- 0x0003 radio_write(0x0546) <- 0x0003 radio_write(0x0946) <- 0x0003 radio_write(0x002e) <- 0x0078 radio_write(0x00c0) <- 0x0080 radio_write(0x002e) <- 0xff87 radio_write(0x00c0) <- 0xff7f radio_write(0x0011) <- 0xfff7 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: replace radio routing magic numbersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29wl12xx: AP-mode - use mac80211 indication about STA WME supportArik Nemtsov
When adding a station, use the information given in the mac80211 populated ieee80211_sta structure to determine if it supports WME. Provide this information to the FW. This patch depends on "mac80211: propagate information about STA WME support down". Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29rtlwifi: use PCI_VENDOR_ID_*Jon Mason
Use PCI_VENDOR_ID_* from pci_ids.h instead of creating #define locally. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29rtlwifi: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, remove unnecessary and unused #defines for PCI. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29iwlegacy: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: implement lacking 0x908 PHY reg opRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: add channel switching tables for 2 GHz bandRafał Miłecki
Tables were taken from observing writes in MMIO dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: perform some tables ops on channel switchingRafał Miłecki
Starring at MMIO dumps around PHY channel switching has led to finding serie of 3 similar ops this patch implements. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: upload PHY values when switching channelRafał Miłecki
After calibrating radio you can find few PHY writes in MMIO dumps: phy_read(0x0009) -> 0x0000 phy_write(0x01ce) <- 0x03dd phy_write(0x01cf) <- 0x03d9 phy_write(0x01d0) <- 0x03d5 phy_write(0x01d1) <- 0x0424 phy_write(0x01d2) <- 0x0429 phy_write(0x01d3) <- 0x042d By comparing to N-PHY code we found out that they are PHY tables for channel switching plus band info read at the beginning. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: prepare place for HT-PHY tablesRafał Miłecki
They are big arrays uploaded to the hardware on init, calibration, etc. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-tx.c
2011-06-28iwlagn: use PCI_DMA_* for pci_* operationsJohn W. Linville
"iwlagn: map command buffers BIDI" uses the DMA_* enumerations for DMA directions, even though the pci_* DMA API is still in use. That patch was undoubtedly developed on top of "iwlagn: don't use the PCI wrappers for DMA operation", which is due in the next release. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27bcma: main.c needs to include <linux/slab.h>Geert Uytterhoeven
m68k allmodconfig: drivers/bcma/main.c: In function ‘bcma_release_core_dev’: drivers/bcma/main.c:68: error: implicit declaration of function ‘kfree’ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> -- http://kisskb.ellerman.id.au/kisskb/buildresult/4243344/ drivers/bcma/main.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27iwlwifi: use pci_dev->revision, againSergei Shtylyov
Commit ff938e43d39e926de74b32a3656c190f979ab642 (net: use pci_dev->revision, again) already converted this driver to using the 'revision' field of 'struct pci_dev' but commit 084dd79172cb3aad11d2b7ee5628d57badca7c6e (iwlagn: move PCI related operations from probe and remove to PCI layer) has again added the code to read the PCI revision ID register... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27mwifiex: restore handling of NULL parametersDan Carpenter
Prior to a5ffddb70c5cab "mwifiex: remove casts of void pointers" the code assumed that the data_buf parameter could be a NULL pointer. The patch preserved some NULL checks but not consistently, so there was a potential for NULL dereferences and it changed the behavior. This patch restores the original behavior. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ath9k: Fix locking issue during tx completionRajkumar Manoharan
The received tx status of aggregated frame without BlockAck may cause deaf state in AR5416 cards. So the driver does a reset to recover. When this happens, we release the pcu_lock before doing a reset as ath_rest acquires pcu_lock. This is ugly and also not atomic. Fixing this addresses the TX DMA failure also. ath_tx_complete_aggr can be called from different paths which takes different variants of spin_lock. This patch also addresses the following warning. WARNING: at kernel/timer.c:1011 del_timer_sync+0x4e/0x50() Call Trace: <IRQ> [<ffffffff8104be3a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff8104be85>] warn_slowpath_null+0x15/0x20 [<ffffffff8105915e>] del_timer_sync+0x4e/0x50 [<ffffffffa03726be>] ath_reset+0x3e/0x210 [ath9k] [<ffffffff8135cdaf>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffffa037760a>] ath_tx_complete_aggr.isra.26+0x54a/0xa40 [ath9k] Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27iwlagn: fix rmmod crashStanislaw Gruszka
priv->bus.bus_specific pointer is used after priv structures was freed, in iwl_pci_remove(), what make ugly rmmod crash. This bug was introduced by current pci changes. On the way remove fake check, if prober error code is returned from .probe() function, .remove() will never be called be null drvdata. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27rt2x00: Fix unspeficied typoJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ssb: use pci_dev->revisionSergei Shtylyov
The bus scan code reads PCI revision ID from the PCI configuration register while it's already stored by PCI subsystem in the 'revision' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ath9k_hw: make use of the gain_table_entry macroMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ath9k_hw: Add carrier leak correction in desired gain calculationMohammed Shafi Shajakhan
Cc: muddin@qca.qualcomm.com Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ath9k_hw: Fix false tx hung detection in AR9003 chipsRajkumar Manoharan
The edma based (AR9003 family) chips update tx status descriptors in a common ring buffer for all transmitted frames. Whenever tx interrupt is raised, the descriptors are processed and tx status index is moved. The complete tx stauts ring are updated with beacons tx status when there are no data frames to be sent for a period of time. In this state, transmitting data frames causes the driver to wait for the tx status on an incorrect tx status index though the status was updated by hw properly. The driver detects this condition as a h/w hang and does unnecessary chip resets. This issue was orginally reported in adhoc mode while sending frames after an idle time. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27mac80211: restrict advertised HW scan ratesJohannes Berg
Advertise only user-requested bitrates in a HW scan. Note that the hw_scan API doesn't currently have a way of asking for a specific probe request bitrate, so we might end up using a bitrate that we don't advertise as supported. I'll fix that later. Also add a hexdump printk to hwsim to verify this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27wireless: unify QoS control field definitionsJohannes Berg
Move all that mac80211 has into the generic ieee80211.h header file and use them. At the same time move them from mask+shift to just bits and rename them for consistent names. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ssb: fix ssb clock rate according to broadcom sourceHauke Mehrtens
This fix was done according to si_clock_rate function in broadcom siutils.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27rtlwifi: rtl8192de: Modify Kconfig and Makefile routines for new driverChaoming Li
Set up Kconfig and Makefile for new driver for RTL8192DE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27rtlwifi: Fix build problems introduced by merging rtl8192deLarry Finger
These patches allow compilation of rtlwifi, rtl8192c_common, rtl8192ce, rtl8192cu and rtl8192se to compile after rtl8192de was added. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27rtlwifi: rtl8192de: Merge TX and RX routinesChaoming Li
Merge routines trx.c and trx.h for RTL8192DE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27rtlwifi: rtl8192de: Merge table routinesChaoming Li
Merge routines table.c and table.h for RTL8192DE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27rtlwifi: rtl8192de: Merge main (sw) routinesChaoming Li
Merge routines sw.c and sw.h for RTL8192SE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27rtlwifi: rtl8192de: Merge rf routinesChaoming Li
Merge routines rf.c and rf.h for RTL8192DE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-25 15:23:59 +0000