summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2012-05-12I2C: xiic: Add OF binding supportLars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: Rename last mux driver to standard patternJean Delvare
Update the MAINTAINERS entry and all other references accordingly. Based on an original patch by Wolfram Sang. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> [wsa: fixed merge conflict due to rework in i2c_add_mux_adapter()] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: tegra: fix 10bit address configurationLaxman Dewangan
The slave address of device to be configured in packet header as follows: 7 bit address: PacketHeader3[7:1] 10 bit address: PacketHeader3[9:0] Fixing the code to make packet header3 properly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: muxes: rename first set of drivers to a standard patternWolfram Sang
Apply a naming pattern like in the rest of the subsystem to a first set of mux drivers. Those drivers are the low-hanging fruit; we want to pick them to motivate upcoming drivers to follow the new pattern. The missing GPIO driver will be converted in a later patch. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> (pca9541) Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-12of/i2c: implement of_find_i2c_adapter_by_nodeStephen Warren
This finds the struct i2c_adapter * for a given device tree node. Just like of_find_i2c_device_by_node. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: implement i2c_verify_adapterStephen Warren
This converts a struct device * to a struct i2c_adapter * while verifying that the device really is an I2C adapter. Just like i2c_verify_client. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-s3c2410: Add HDMIPHY quirk for S3C2440Karol Lewandowski
This patch adds support for s3c2440 I2C bus controller dedicated HDMIPHY device on Exynos4 platform. Some quirks are introduced due to differences between HDMIPHY and other I2C controllers on Exynos4. These differences are: - no GPIOs, HDMIPHY is inside the SoC and the controller is connected internally - due to unknown reason (probably HW bug in HDMIPHY and/or the controller) a transfer fails to finish. The controller hangs after sending the last byte, the workaround for this bug is resetting the controller after each transfer Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Tested-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-s3c2410: Rework device type handlingKarol Lewandowski
Reorganize driver a bit to better handle device tree-based systems: - move machine type to driver's private structure instead of quering platform device variants in runtime - replace s3c24xx_i2c_type enum with unsigned int that holds bitmask with revision-specific quirks Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: muxes are not EXPERIMENTAL anymoreWolfram Sang
We got multiple patches to add mux support to device tree, so people are using it happily already and build up on it. I also used it in a project without encountering problems. 20 months of EXPERIMENTAL should do for this. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: David Daney <ddaney.cavm@gmail.com>
2012-05-12i2c/of: Automatically populate i2c mux busses from device tree data.David Daney
For 'normal' i2c bus drivers, we can call of_i2c_register_devices() and have the device tree framework automatically populate the bus with the devices specified in the device tree. This patch adds a common code to the i2c mux framework to have the mux sub-busses be populated by the of_i2c_register_devices() too. If the mux device has an of_node, we populate the sub-bus' of_node so that the subsequent call to of_i2c_register_devices() will find the corresponding devices. It seemed better to put this logic in i2c_add_mux_adapter() rather than the individual mux drivers, as they will all probably want to do the same thing. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Lars-Peter Clausen <lars@metafoo.de> [wsa: removed superfluous ret-variable and fixed a typo in a comment] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: Add a struct device * parameter to i2c_add_mux_adapter()David Daney
And adjust all callers. The new device parameter is used in the next patch to initialize the mux's of_node so that its children may be automatically populated. Signed-off-by: David Daney <david.daney@cavium.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12of/i2c: call i2c_verify_client from of_find_i2c_device_by_nodeStephen Warren
i2c_bus_type may contain both I2C clients and I2C adapters. Fix of_find_i2c_device_by_node to call i2c_verify_client to ensure that it only returns non-NULL of I2C clients. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: designware: Add clk_{un}prepare() supportViresh Kumar
clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for designware i2c. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: designware: add PM supportDeepak Sikri
This patch adds in support for standby/S2R/hybernate for i2c-designware driver. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: ixp2000: remove driverRob Herring
The platform is removed, so there are no users of this driver. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: pnx: add device tree supportRoland Stigge
This patch adds device tree support to the pnx-i2c driver by using platform resources for memory region and irq and removing dependency on mach includes. The following platforms are affected: * PNX * LPC31xx (WIP) * LPC32xx The patch is based on a patch by Jon Smirl, working on lpc31xx integration Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: imx: don't use strcpy but strlcpyWolfram Sang
Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2012-05-12i2c: eg20t: don't use strcpy but strlcpyWolfram Sang
Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com>
2012-05-12i2c: eg20t: remove unused functionWolfram Sang
cppcheck rightfully says: drivers/i2c/busses/i2c-eg20t.c:266: style: The function 'ktime_lt' is never used Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com>
2012-05-12i2c: eg20t: pass on return value in i2c_xferWolfram Sang
smatch says: drivers/i2c/busses/i2c-eg20t.c:702 pch_i2c_xfer() info: why not propagate 'ret' from mutex_lock_interruptible() instead of -512? which is especially true since for -ENORESTARTSYS it is said in linux/errno.h "signal_pending() MUST be set" which is not done here. So just pass on the return value we got. Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com>
2012-05-12i2c: eg20t: use NULL instead of 0Wolfram Sang
sparse rightfully says: drivers/i2c/busses/i2c-eg20t.c:990:59: warning: Using plain integer as NULL pointer Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com>
2012-05-12i2c-eg20t: Merge two functionsTomoya MORINAGA
By previous patch, pch_i2c_wait_for_xfer_complete can be merged to pch_i2c_wait_for_check_xfer. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-eg20t: add helper function for xfer checkTomoya MORINAGA
Currently, there are the same code for xfer complete check processing. So, I add helper function pch_i2c_wait_for_check_xfer. Reported-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-eg20t: Call init() when wait-event timeout occursTomoya MORINAGA
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-mpc: avoid I2C abnormal after resuming from deep sleepZhao Chenhui
When entering deep sleep, the value in the registers I2CFDR and I2CDFSRR are lost. This causes I2C access to fail after resuming. Add suspend/resume routines to save/restore the registers I2CFDR and I2CDFSRR. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: sh_mobile: add device tree supportMagnus Damm
This patch enables DT support for the IIC driver used on SH-based SoCs such as sh7722 and sh7724 among others as well as SH-Mobile SoCs such as sh7367, sh7377, sh7372, sh73a0 and r8a7740. Tested with out-of-tree DT support code on the sh7372 Mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-pnx.c: Remove duplicated i2c.hRoland Stigge
The platforms using i2c-pnx.c both defined a duplicated i2c.h (used nowhere else). This patch removes those and integrates the contents into the driver itself. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-pnx.c: Use resources in platformsRoland Stigge
As a precondition for device tree conversion, the platforms using i2c-pnx.c are converted to using mem and irq resources instead of platform data. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: designware: Add support for 16bit register accessStefan Roese
The STM SPEAr platform can only access the i2c controller register via 16bit read/write functions. This patch adds support to automatically detect this 16bit access mode. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c: Dynamically assign adapter id if it wasn't explictly specifiedKarol Lewandowski
Commit 488bf314b ("i2c: Allow i2c_add_numbered_adapter() to assign a bus id") reworked i2c_add_numbered_adapter() to call i2c_add_adapter() if requested bus was -1. This allows to simplify driver's initialization procedure by using just one function for static and dynamic adapter id registration. This patch updates few more drivers (missed out in original patch) to use this functionality. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-pxa: Drop leftover commentKarol Lewandowski
Commit 488bf314b ("i2c: Allow i2c_add_numbered_adapter() to assign a bus id") reworked i2c-pxa driver leaving obsolete comment. This commit simply drops it. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-12i2c-s3c2410: Drop unused defineKarol Lewandowski
Use standard of_match_ptr() to avoid defining variable unused in non device tree builds. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-06Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes form Peter Anvin * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver x86, relocs: Remove an unused variable asm-generic: Use __BITS_PER_LONG in statfs.h x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it
2012-05-05Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull an ACPI patch from Len Brown: "It fixes a D3 issue new in 3.4-rc1." By Lin Ming via Len Brown: * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPI: Fix D3hot v D3cold confusion
2012-05-05ACPI: Fix D3hot v D3cold confusionLin Ming
Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot in some places, but D3cold in other places. After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD; and all references to D3hot use ACPI_STATE_D3_HOT. ACPI's _PR3 method is used to enter both D3hot and D3cold states. What distinguishes D3hot from D3cold is the presence _PR3 (Power Resources for D3hot) If these resources are all ON, then the state is D3hot. If _PR3 is not present, or all _PR0 resources for the devices are OFF, then the state is D3cold. This patch applies after Linux-3.4-rc1. A future syntax cleanup may remove ACPI_STATE_D3 to emphasize that it always means ACPI_STATE_D3_COLD. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-05-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtc: Fix possible null pointer dereference in rtc-mpc5121.c
2012-05-04intel_mid_powerbtn: mark irq as IRQF_NO_SUSPENDYong Wang
So that the power button still wakes up the platform. Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.com Tested-by: Kangkai Yin <kangkai.yin@intel.com> Tested-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-04Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Some minor fixes from Intel and a radeon fix. I have the nouveau fix for the i2c regression queued for next week, its mostly a revert and seems to work on the system it was originally introduced for thanks to some i2c core changes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: clarify and extend wb setup on APUs and NI+ asics drm/i915: enable dip before writing data on gen4 fixing dmi match for hp t5745 and hp st5747 thin client drm/i915: Only enable IPS polling for gen5 drm/i915: Do not read non-existent DPLL registers on PCH hardware
2012-05-04Merge tag 'md-3.4-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull one small fix for md/bitmaps from NeilBrown: "This fixes a regression that was introduced in the merge window." * tag 'md-3.4-fixes' of git://neil.brown.name/md: md/bitmap: fix calculation of 'chunks' - missing shift.
2012-05-04drm/radeon: clarify and extend wb setup on APUs and NI+ asicsAlex Deucher
Use family rather than DCE check for clarity, also always use wb on APUs, there will never be AGP variants. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-04md/bitmap: fix calculation of 'chunks' - missing shift.NeilBrown
commit 61a0d80c "md/bitmap: discard CHUNK_BLOCK_SHIFT macro" replaced CHUNK_BLOCK_RATIO() by the same text that was replacing CHUNK_BLOCK_SHIFT() - which is clearly wrong. The result is that 'chunks' is often too small by 1, which can sometimes result in a crash (not sure how). So use the correct replacement, and get rid of CHUNK_BLOCK_RATIO which is no longe used. Reported-by: Karl Newman <siliconfiend@gmail.com> Tested-by: Karl Newman <siliconfiend@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-03Merge tag 'mfd-for-linus-3.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull second set of MFD fixes from Samuel Ortiz: "This time we only have a one liner fixing an omap-usb build error." * tag 'mfd-for-linus-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix build breakage in omap-usb-host.c
2012-05-03Merge branch 'efi-vars' from Matthew GarrettLinus Torvalds
* efi-vars: efivars: Improve variable validation
2012-05-03efivars: Improve variable validationMatthew Garrett
Ben Hutchings pointed out that the validation in efivars was inadequate - most obviously, an entry with size 0 would server as a DoS against the kernel. Improve this based on his suggestions. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-03Merge tag 'tag/upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata fixes from Jeff Garzik: 1) Fix regression that could cause a misdiagnosis, which in turn could lead to an erroneous 3.0 Gbps -> 1.5 downshift, particularly when hotplug and suspend/resume is involved. 2) Fix a regression that led to ata%d controller ids being numbered one larger than in <= 3.4-rc3 (oh, the horror!). Controller ids should now be as expected. 3) add some DT, PCI id's 4) ata/pata_arasan_cf: minor cpp fixing/cleaning * tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata: ahci_platform: Add synopsys ahci controller in DT's compatible list ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros libata: init ata_print_id to 0 ahci: Detect Marvell 88SE9172 SATA controller libata: skip old error history when counting probe trials
2012-05-03Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds
git://git.pengutronix.de/git/wsa/linux Pull i2c embedded fixes from Wolfram Sang: "Here are some typical i2c driver bugfixes for 3.4. Missed clock handling, improper timeout fixes, hardware wrokarounds... All patches have been in linux-next for a few days, too." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: mxs: disable QUEUE when sending is done i2c: mxs: handle spurious interrupt i2c-eg20t: Modify MODULE_AUTHOR's email address i2c-eg20t: change timeout value 50msec to 1000msec i2c: tegra: Add delay before resetting the controller after NACK i2c: pnx: Disable clk in suspend
2012-05-03Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Just some regression fixes from Ben along with a variable that gcc failed to spot is uninitialised." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: nouveau: initialise has_optimus variable. drm/nv10/gpio: fix thinko in mask for gpio lines 2-9 nvc0/fb: shut up PMFB interrupt after the first occurrence drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac drm/nouveau/bios: fix regression on some nv4x board
2012-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Transfer padding was wrong for full-speed USB in ASIX driver, fix from Ingo van Lil. 2) Propagate the negative packet offset fix into the PowerPC BPF JIT. From Jan Seiffert. 3) dl2k driver's private ioctls were letting unprivileged tasks make MII writes and other ugly bits like that. Fix from Jeff Mahoney. 4) Fix TX VLAN and RX packet drops in ucc_geth, from Joakim Tjernlund. 5) OOPS and network namespace fixes in IPVS from Hans Schillstrom and Julian Anastasov. 6) Fix races and sleeping in locked context bugs in drop_monitor, from Neil Horman. 7) Fix link status indication in smsc95xx driver, from Paolo Pisati. 8) Fix bridge netfilter OOPS, from Peter Huang. 9) L2TP sendmsg can return on error conditions with the socket lock held, oops. Fix from Sasha Levin. 10) udp_diag should return meaningful values for socket memory usage, from Shan Wei. 11) Eric Dumazet is so awesome he gets his own section: Socket memory cgroup code (I never should have applied those patches, grumble...) made erroneous changes to sk_sockets_allocated_read_positive(). It was changed to use percpu_counter_sum_positive (which requires BH disabling) instead of percpu_counter_read_positive (which does not). Revert back to avoid crashes and lockdep warnings. Adjust the default tcp_adv_win_scale and tcp_rmem[2] values to fix throughput regressions. This is necessary as a result of our more precise skb->truesize tracking. Fix SKB leak in netem packet scheduler. 12) New device IDs for various bluetooth devices, from Manoj Iyer, AceLan Kao, and Steven Harms. 13) Fix command completion race in ipw2200, from Stanislav Yakovlev. 14) Fix rtlwifi oops on unload, from Larry Finger. 15) Fix hard_mtu when adjusting hard_header_len in smsc95xx driver. From Stephane Fillod. 16) ehea driver registers it's IRQ before all the necessary state is setup, resulting in crashes. Fix from Thadeu Lima de Souza Cascardo. 17) Fix PHY connection failures in davinci_emac driver, from Anatolij Gustschin. 18) Missing break; in switch statement in bluetooth's hci_cmd_complete_evt(). Fix from Szymon Janc. 19) Fix queue programming in iwlwifi, from Johannes Berg. 20) Interrupt throttling defaults not being actually programmed into the hardware, fix from Jeff Kirsher and Ying Cai. 21) TLAN driver SKB encoding in descriptor busted on 64-bit, fix from Benjamin Poirier. 22) Fix blind status block RX producer pointer deref in TG3 driver, from Matt Carlson. 23) Promisc and multicast are busted on ehea, fixes from Thadeu Lima de Souza Cascardo. 24) Fix crashes in 6lowpan, from Alexander Smirnov. 25) tcp_complete_cwr() needs to be careful to not rewind the CWND to ssthresh if ssthresh has the "infinite" value. Fix from Yuchung Cheng. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) sungem: Fix WakeOnLan tcp: change tcp_adv_win_scale and tcp_rmem[2] net: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg drop_monitor: prevent init path from scheduling on the wrong cpu usbnet: fix failure handling in usbnet_probe usbnet: fix leak of transfer buffer of dev->interrupt ucc_geth: Add 16 bytes to max TX frame for VLANs net: ucc_geth, increase no. of HW RX descriptors netem: fix possible skb leak sky2: fix receive length error in mixed non-VLAN/VLAN traffic sky2: propogate rx hash when packet is copied net: fix two typos in skbuff.h cxgb3: Don't call cxgb_vlan_mode until q locks are initialized ixgbe: fix calling skb_put on nonlinear skb assertion bug ixgbe: Fix a memory leak in IEEE DCB igbvf: fix the bug when initializing the igbvf smsc75xx: enable mac to detect speed/duplex from phy smsc75xx: declare smsc75xx's MII as GMII capable smsc75xx: fix phy interrupt acknowledge smsc75xx: fix phy init reset loop ...
2012-05-03Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix OOPS seen in coretemp driver if the CPU core ID is too large" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (coretemp) Increase CPU core limit hwmon: (coretemp) fix oops on cpu unplug
2012-05-03ata: ahci_platform: Add synopsys ahci controller in DT's compatible listViresh Kumar
SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares ahci_platform driver with other controller versions. This patch updates DT compatible list for ahci_platform. It also updates and renames binding documentation to more generic name. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-31 21:48:26 +0000