summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2012-08-23usb composite: fix locking in usb_function_activateMichael Grzeschik
The lockdep hunter mentions a non consistent usage of spin_lock and spin_lock_irqsafe in the composite_disconnect and usb_function_activate function: [ 15.700897] ================================= [ 15.705255] [ INFO: inconsistent lock state ] [ 15.709617] 3.5.0-rc5+ #413 Not tainted [ 15.713453] --------------------------------- [ 15.717812] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 15.723822] uvc-gadget/116 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 15.729222] (&(&cdev->lock)->rlock){?.+...}, at: [<7f0049e8>] composite_disconnect+0x2c/0x74 [g_webcam] [ 15.738797] {HARDIRQ-ON-W} state was registered at: [ 15.743677] [<8006de3c>] mark_lock+0x148/0x688 [ 15.748325] [<8006ecb0>] __lock_acquire+0x934/0x1b74 [ 15.753481] [<8007047c>] lock_acquire+0x98/0x138 [ 15.758288] [<804c776c>] _raw_spin_lock+0x4c/0x84 [ 15.763188] [<7f006ae4>] usb_function_activate+0x28/0x94 [g_webcam] [ 15.769652] [<7f00820c>] usb_ep_autoconfig_reset+0x78/0x98 [g_webcam] [ 15.776287] [<7f0082a4>] uvc_v4l2_open+0x78/0x94 [g_webcam] [ 15.782054] [<80366a38>] v4l2_open+0x104/0x130 [ 15.786697] [<800efd30>] chrdev_open+0xa0/0x170 [ 15.791423] [<800e9718>] do_dentry_open.isra.13+0x1e8/0x264 [ 15.797186] [<800ea5d4>] nameidata_to_filp+0x58/0x94 [ 15.802340] [<800fa29c>] do_last.isra.31+0x2a0/0x808 [ 15.807497] [<800faa40>] path_openat+0xc8/0x3e8 [ 15.812216] [<800fae90>] do_filp_open+0x3c/0x90 [ 15.816936] [<800ea6fc>] do_sys_open+0xec/0x184 [ 15.821655] [<800ea7c4>] sys_open+0x30/0x34 [ 15.826027] [<8000e5c0>] ret_fast_syscall+0x0/0x48 [ 15.831015] irq event stamp: 6048 [ 15.834330] hardirqs last enabled at (6047): [<804c81b8>] _raw_spin_unlock_irqrestore+0x40/0x54 [ 15.843132] hardirqs last disabled at (6048): [<8000e174>] __irq_svc+0x34/0x60 [ 15.850370] softirqs last enabled at (5940): [<80028380>] __do_softirq+0x188/0x270 [ 15.858043] softirqs last disabled at (5935): [<80028944>] irq_exit+0xa0/0xa8 [ 15.865195] [ 15.865195] other info that might help us debug this: [ 15.871724] Possible unsafe locking scenario: [ 15.871724] [ 15.877645] CPU0 [ 15.880091] ---- [ 15.882537] lock(&(&cdev->lock)->rlock); [ 15.886659] <Interrupt> [ 15.889278] lock(&(&cdev->lock)->rlock); [ 15.893573] [ 15.893573] *** DEADLOCK *** [ 15.893573] [ 15.899496] no locks held by uvc-gadget/116. [ 15.903765] [ 15.903765] stack backtrace: [ 15.908125] Backtrace: [ 15.910604] [<80012038>] (dump_backtrace+0x0/0x114) from [<804bf8a4>] (dump_stack+0x20/0x24) [ 15.919043] r6:dfb8e6f0 r5:dfb8e400 r4:809717ec r3:60000193 [ 15.924766] [<804bf884>] (dump_stack+0x0/0x24) from [<804c0c0c>] (print_usage_bug+0x258/0x2c0) [ 15.933388] [<804c09b4>] (print_usage_bug+0x0/0x2c0) from [<8006e240>] (mark_lock+0x54c/0x688) [ 15.942006] [<8006dcf4>] (mark_lock+0x0/0x688) from [<8006edb8>] (__lock_acquire+0xa3c/0x1b74) [ 15.950625] [<8006e37c>] (__lock_acquire+0x0/0x1b74) from [<8007047c>] (lock_acquire+0x98/0x138) [ 15.959418] [<800703e4>] (lock_acquire+0x0/0x138) from [<804c78fc>] (_raw_spin_lock_irqsave+0x58/0x94) [ 15.968736] [<804c78a4>] (_raw_spin_lock_irqsave+0x0/0x94) from [<7f0049e8>] (composite_disconnect+0x2c/0x74 [g_webcam]) [ 15.979605] r7:00000012 r6:df82b0c4 r5:ded755bc r4:ded75580 [ 15.985331] [<7f0049bc>] (composite_disconnect+0x0/0x74 [g_webcam]) from [<8033c170>] (_gadget_stop_activity+0xc4/0x120) [ 15.996200] r6:df82b0c4 r5:df82b0c8 r4:df82b0d0 r3:7f0049bc [ 16.001919] [<8033c0ac>] (_gadget_stop_activity+0x0/0x120) from [<8033e390>] (udc_irq+0x724/0xcb8) [ 16.010877] r6:df82b010 r5:00000000 r4:df82b010 r3:00000000 [ 16.016595] [<8033dc6c>] (udc_irq+0x0/0xcb8) from [<8033baec>] (ci_irq+0x64/0xdc) [ 16.024086] [<8033ba88>] (ci_irq+0x0/0xdc) from [<80086538>] (handle_irq_event_percpu+0x74/0x298) [ 16.032958] r5:807fd414 r4:df38fdc0 [ 16.036566] [<800864c4>] (handle_irq_event_percpu+0x0/0x298) from [<800867a8>] (handle_irq_event+0x4c/0x6c) [ 16.046315] [<8008675c>] (handle_irq_event+0x0/0x6c) from [<80089318>] (handle_level_irq+0xbc/0x11c) [ 16.055447] r6:def04000 r5:807fd414 r4:807fd3c0 r3:00020000 [ 16.061166] [<8008925c>] (handle_level_irq+0x0/0x11c) from [<80085cc8>] (generic_handle_irq+0x38/0x4c) [ 16.070472] r5:807f7f64 r4:8081e9f8 [ 16.074082] [<80085c90>] (generic_handle_irq+0x0/0x4c) from [<8000ef98>] (handle_IRQ+0x5c/0xbc) [ 16.082788] [<8000ef3c>] (handle_IRQ+0x0/0xbc) from [<800085cc>] (tzic_handle_irq+0x6c/0x9c) [ 16.091225] r8:00000000 r7:def059b0 r6:00000001 r5:00000000 r4:00000000 r3:00000012 [ 16.099141] [<80008560>] (tzic_handle_irq+0x0/0x9c) from [<8000e184>] (__irq_svc+0x44/0x60) [ 16.107494] Exception stack(0xdef059b0 to 0xdef059f8) [ 16.112550] 59a0: 00000001 00000001 00000000 dfb8e400 [ 16.120732] 59c0: 40000013 81a2e500 00000000 81a2e500 00000000 00000000 80862418 def05a0c [ 16.128912] 59e0: def059c8 def059f8 80070e24 804c81bc 20000013 ffffffff [ 16.135542] [<804c8178>] (_raw_spin_unlock_irqrestore+0x0/0x54) from [<8003d0ec>] (__queue_work+0x108/0x470) [ 16.145369] r5:dfb1a30c r4:81b93c00 [ 16.148978] [<8003cfe4>] (__queue_work+0x0/0x470) from [<8003d4e0>] (queue_work_on+0x4c/0x54) [ 16.157511] [<8003d494>] (queue_work_on+0x0/0x54) from [<8003d544>] (queue_work+0x30/0x34) [ 16.165774] r6:df2e6900 r5:80e0c2f8 r4:dfb1a2c8 r3:def04000 [ 16.171495] [<8003d514>] (queue_work+0x0/0x34) from [<80493284>] (rpc_make_runnable+0x9c/0xac) [ 16.180113] [<804931e8>] (rpc_make_runnable+0x0/0xac) from [<80493c88>] (rpc_execute+0x40/0xa8) [ 16.188811] r5:def05ad4 r4:dfb1a2c8 [ 16.192426] [<80493c48>] (rpc_execute+0x0/0xa8) from [<8048c734>] (rpc_run_task+0xa8/0xb4) [ 16.200690] r8:00000001 r7:df74f520 r6:ded75700 r5:def05ad4 r4:dfb1a2c8 r3:00000002 [ 16.208618] [<8048c68c>] (rpc_run_task+0x0/0xb4) from [<801f1608>] (nfs_initiate_read+0xb4/0xd4) [ 16.217403] r5:df3e86c0 r4:00000000 [ 16.221015] [<801f1554>] (nfs_initiate_read+0x0/0xd4) from [<801f1c64>] (nfs_generic_pg_readpages+0x9c/0x114) [ 16.230937] [<801f1bc8>] (nfs_generic_pg_readpages+0x0/0x114) from [<801f0744>] (__nfs_pageio_add_request+0xe8/0x214) [ 16.241545] r8:000bf000 r7:00000000 r6:00000000 r5:deef4640 r4:def05c1c r3:801f1bc8 [ 16.249463] [<801f065c>] (__nfs_pageio_add_request+0x0/0x214) from [<801f0e3c>] (nfs_pageio_add_request+0x28/0x54) [ 16.259818] [<801f0e14>] (nfs_pageio_add_request+0x0/0x54) from [<801f1394>] (readpage_async_filler+0x114/0x170) [ 16.269992] r5:def05c58 r4:80fd7300 [ 16.273607] [<801f1280>] (readpage_async_filler+0x0/0x170) from [<800bb418>] (read_cache_pages+0xa0/0x108) [ 16.283259] r8:00200200 r7:00100100 r6:df74f654 r5:def05cd0 r4:80fd7300 [ 16.290034] [<800bb378>] (read_cache_pages+0x0/0x108) from [<801f218c>] (nfs_readpages+0xc4/0x168) [ 16.298999] [<801f20c8>] (nfs_readpages+0x0/0x168) from [<800bb1d0>] (__do_page_cache_readahead+0x254/0x354) [ 16.308833] [<800baf7c>] (__do_page_cache_readahead+0x0/0x354) from [<800bb5d0>] (ra_submit+0x38/0x40) [ 16.318145] [<800bb598>] (ra_submit+0x0/0x40) from [<800bb6b0>] (ondemand_readahead+0xd8/0x3b0) [ 16.326851] [<800bb5d8>] (ondemand_readahead+0x0/0x3b0) from [<800bba20>] (page_cache_async_readahead+0x98/0xa8) [ 16.337043] [<800bb988>] (page_cache_async_readahead+0x0/0xa8) from [<800b2118>] (generic_file_aio_read+0x5b4/0x7c4) [ 16.347565] r6:00000000 r5:df74f654 r4:80fd70a0 [ 16.352231] [<800b1b64>] (generic_file_aio_read+0x0/0x7c4) from [<801e82c0>] (nfs_file_read+0x7c/0xcc) [ 16.361544] [<801e8244>] (nfs_file_read+0x0/0xcc) from [<800eab80>] (do_sync_read+0xb4/0xf4) [ 16.369981] r9:00000000 r8:def05f70 r7:00000000 r6:00000000 r5:dec34900 r4:fffffdee [ 16.377896] [<800eaacc>] (do_sync_read+0x0/0xf4) from [<800eb548>] (vfs_read+0xb4/0x144) [ 16.385987] r8:00000000 r7:def05f70 r6:76a95008 r5:003e3dd6 r4:dec34900 [ 16.392761] [<800eb494>] (vfs_read+0x0/0x144) from [<800eb624>] (sys_read+0x4c/0x78) [ 16.400504] r8:00000000 r7:00000003 r6:003e3dd6 r5:76a95008 r4:dec34900 [ 16.407279] [<800eb5d8>] (sys_read+0x0/0x78) from [<8000e5c0>] (ret_fast_syscall+0x0/0x48) [ 16.415543] r9:def04000 r8:8000e864 r6:000086b4 r5:00000000 r4:00000000 [ 20.872729] gadget: high-speed config #1: Video [ 20.877368] gadget: uvc_function_set_alt(0, 0) [ 20.881908] gadget: uvc_function_set_alt(1, 0) [ 20.891464] gadget: uvc_function_set_alt(1, 0) Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: fix boot up hangNeil Zhang
Fix boot up hang when enable udc without otg enabled. The root cause is that the clock will be shut down when probe routine is finished because of clock gating. When a gadget driver is registered at this time, it will call mv_udc_start which in turn will call mv_udc_vbus_session. If there is no cable attached at the boot up time, the vbus is low, so it will call stop_activity path without clock enabled which will cause system hang then. Actually, we need't go this path when clock is disabled, what we need to do is just jump out. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: fix hang when shutdownYunfan Zhang
Fix system hang in udc shutdown routine which caused by accessing usb register when clock is disabled. So enable usb clock before access register. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: add iso supportChao Xie
In order to support iso, we need do the following things: 1. fix length for one dtd 2. allow req contains multiple packets for a ISO transfer Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: enable stream modeNeil Zhang
According to ChipIdea's reference manual in section 8.5.2 "Non-streaming operational mode in device mode", we'd better enable stream mode, especially that ISO endpoints are not supported when the SDIS bit is set. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: avoid sleeping on spinlockNeil Zhang
build_dtd() can be called when hold a spinlock, but GFP_KERNEL may cause dma_pool_alloc() sleep, So we need use GFP_ATOMIC instead of GFP_KERNEL. But using GFP_ATOMIC may cause failure when allocating memory, add error handler to handle it. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: remove unused codeNeil Zhang
Clean unused code for mv_udc driver. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-23usb: gadget: mv_udc: reduce the delay intervalNeil Zhang
There are several places use udelay(LOOPS_USEC) to wait the status to be changed, but the delay interval is a bit too long, so reduce it to enhance the performance. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-16Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: intc: Handle domain association for sparseirq pre-allocated vectors. sh: sh7269: Fix LCD pinmux sh: dma: fix request_irq usage
2012-08-16Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull two slave-dmaengine fixes from Vinod Koul: "One fixes the correct use of clock API in imx driver and the other enables clock for tegra driver, which is used for other tegra driver conversion to dmanegine in -next." * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: enable/disable dma clock dma: imx-dma: Fix kernel crash due to missing clock conversion
2012-08-16Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull more drm fixes from Dave Airlie: "Just some intel and nouveau ones this time, intel has more edp panel fixes for macbooks and nouveau has a suspend/resume regression fix in there." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel Vetter writes: "A few important fixers: - fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai) - make the retina mbp work (ignore bogus edp bpc value in vbt) - fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula) - fix an edp panel power sequence regression, fixes the new macbook air - apply the tlb invalidate w/a Otherwise we still have another gmbus regression (patches are awaiting tested-bys) and there's something odd going with some rare systems not entering rc6 often enough (and hence blowing through too much power). It seems to be a timing-related issue and can be mitigated by frobbing the magic tuning parameters. We're still working on that one. Also, we still have some fallout from the hw context support, but you can only hit that with mesa master." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid
2012-08-14drm/i915: Apply post-sync write for pipe control invalidatesChris Wilson
When invalidating the TLBs it is documentated as requiring a post-sync write. Failure to do so seems to result in a GPU hang. Exposure to this hang on IVB seems to be a result of removing the extra stalls required for SNB pipecontrol workarounds: commit 6c6cf5aa9c583478b19e23149feaa92d01fb8c2d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 18:02:28 2012 +0100 drm/i915: Only apply the SNB pipe control w/a to gen6 Note: Manually switch the pipe_control cmd to 4 dwords to avoid a (silent) functional conflict with -next. This way will get a loud (but conflict with next (since the scratch_addr has been deleted there). Reported-and-tested-by: yex.tian@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322 Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: added note about merge conflict with -next.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14drm/i915: reorder edp disabling to fix ivb MacBook AirDaniel Vetter
eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671 Tested-by: Roberto Romer <sildurin@gmail.com> Tested-by: Daniel Wagner <wagi@monom.org> Tested-by: Keith Packard <keithp@keithp.com> Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Included are bug fixes and a patch to enable system call filtering with BPF." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/compat: fix mmap compat system calls s390/compat: fix compat wrappers for process_vm system calls s390: do not clobber personality flags in sys_32_personality() s390/seccomp: add support for system call filtering using BPF s390/sclp_sdias: Add missing break and "fall through" s390/mm: remove MAX_PHYSADDR_BITS define
2012-08-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Radeon and intel fixes mostly, one fix to the mgag200 driver to not hang on certain server variants." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits) drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios drm/mgag200: fix G200ER pll picking algorithm drm/edid: Fix potential memory leak in edid_load() drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB ...
2012-08-14GPIO: gpio-pxa: fix building without CONFIG_OFArnd Bergmann
Commit 7212157267 ("GPIO: gpio-pxa: fix devicetree functions") added an "xlate" function pointer to the irq_domain_ops, but this function is nor declared or defined anywhere when CONFIG_OF is disabled, causing the build error: drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function) Extending the DT-only code section to cover the irq_domain_ops and the pxa_gpio_dt_ids solves this problem and makes it clearer which code is actually used without DT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-14drm/nv86/fifo: suspend fixMaxim Levitsky
This fix is a backport from the reworked nouveau driver. It masks off the engines we're not expecting to use before attempting a channel kickoff. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nouveau: disable copy engine on NVAFHenrik Rydberg
The copy engine exhibits random memory corruption in at least one case, the GeForce 320M (nv50, 0xaf) in the MacBookAir3,1. This patch omits creating the engine for the specific chipset, falling back to M2MF, which kills the symptoms. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14nouveau: fixup scanout enable in nvc0_pmMaarten Lankhorst
Fixes screen being black after changing performance level. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@vger.kernel.org [3.5+] Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nouveau/aux: mask off higher bits of auxch index in i2c table entryBen Skeggs
At least partially fixes DP output detection on W530. Not sure if more issues remain, or if my adaptor is just behaving weirdly (it does that sometimes). In any case, this patch is necessary. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinateChristoph Bumiller
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2012-08-13drm/i915: ensure i2c adapter is all set before adding itJani Nikula
i2c_add_adapter() may do i2c transfers on the bus to detect supported devices. Therefore the adapter needs to be all set before adding it. This was not the case for the bit-banging fallback, resulting in an oops if the device detection GMBUS transfers timed out. Fix the issue by calling i2c_add_adapter() only after intel_gpio_setup(). LKML-Reference: <5021F00B.7000503@ionic.de> Tested-by: Mihai Moldovan <ionic@ionic.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-13drm/radeon: fix typo in function header commentDmitrii Cherkasov
Signed-off-by: Dmitrii Cherkasov <DCherkasov@luxsoft.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: implement timestamp userspace query (v2)Marek Olšák
Returns a snapshot of the GPU clock counter. Needed for certain OpenGL extensions. v2: agd5f - address Jerome's comments - add function documentation Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: add MSAA texture support for r600-evergreenMarek Olšák
Most of the checking seems to be in place already. As you can see, log2(number of samples) resides in LAST_LEVEL. This is required for MSAA support (namely for depth-stencil resolve and blitting between MSAA resources). Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: reorder code in r600_check_texture_resourceMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fence virtual address and free it once idle v4Jerome Glisse
Virtual address need to be fenced to know when we can safely remove it. This patch also properly clear the pagetable. Previously it was serouisly broken. Kernel 3.5/3.4 need a similar patch but adapted for difference in mutex locking. v2: For to update pagetable when unbinding bo (don't bailout if bo_va->valid is true). v3: Add kernel 3.5/3.4 comment. v4: Fix compilation warnings. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fix some missing parens in asic macrosAlex Deucher
Better safe than sorry. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon: fix ordering in pll picking on dce4+Alex Deucher
No functional change, but re-order the cases so they evaluate properly due to the way the DCE macros work. Noticed by kallisti5 on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: do not reenable crtc after moving vram start addressJerome Glisse
It seems we can not update the crtc scanout address. After disabling crtc, update to base address do not take effect after crtc being reenable leading to at least frame being scanout from the old crtc base address. Disabling crtc display request lead to same behavior. So after changing the vram address if we don't keep crtc disabled we will have the GPU trying to read some random system memory address with some iommu this will broke the crtc engine and will lead to broken display and iommu error message. So to avoid this, disable crtc. For flicker less boot we will need to avoid moving the vram start address. This patch should also fix : https://bugs.freedesktop.org/show_bug.cgi?id=42373 Cc: <stable@vger.kernel.org> Signed-off-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon: fix bank tiling parameters on caymanAlex Deucher
Handle the 16 bank case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: fix bank tiling parameters on evergreenAlex Deucher
Handle the 16 bank case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: fix bank tiling parameters on SIChristian König
The sixteen bank case wasn't handled here, leading to GPU crashes because of userspace miscalculation. Signed-off-by: Christian König <deathsimple@vodafone.de> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: properly handle crtc powergatingAlex Deucher
Need to make sure the crtc is gated on before modesetting. Explicitly gate the crtc on in prepare() and set a flag so that the dpms functions don't gate it off during mode set. Noticed by sylware on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: properly handle SS overrides on TN (v2)Alex Deucher
The IntegratedSystemInfo table changed versions on TN. Update the SS override lookup to handle it. v2: fix copy-paste typo. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/dce4+: set a more reasonable cursor watermarkAlex Deucher
Set a more reasonable default cursor watermark. The recommended default value is 4. This should reduce urgency requests to the MC form the display hw. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fix handling for ddc type 5 on combiosAlex Deucher
When ddc type is 5, need to look up the i2c channel in the i2c table. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13Merge branch 'fixes-for-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull leds fixes/revert from Bryan Wu. * 'fixes-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: renesas: fix error handling Revert "leds: use led_set_brightness in led_trigger_event" leds: lp8788: Fix updating scale configuration bits
2012-08-13leds: renesas: fix error handlingArnd Bergmann
bfe4c041 "leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path" introduced a possible case in which r_tpu_probe calls iounmap on a wild pointer. This changes the one case that was missed in the same way as the other error paths. Without this patch, building kota2_defconfig results in: drivers/leds/leds-renesas-tpu.c: In function 'r_tpu_probe': drivers/leds/leds-renesas-tpu.c:246:6: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-renesas-tpu.c:308:17: warning: 'p' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-08-13Revert "leds: use led_set_brightness in led_trigger_event"Fabio Baltieri
This reverts commit a0193cbee0809d65362a0767b2d50306b145b2f5. The problem with the original commit was that it caused a warning with the MMC trigger calling del_timer_sync from hard-irq context. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Reported-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking changes from David Miller: "Most importantly this should cure the ipv4-mapped ipv6 socket TCP crashes some people were seeing, otherwise: 1) Fix e1000e autonegotiation handling regression, from Tushar Dave. 2) Fix TX data corruption race on e1000e down, also from Tushar Dave. 3) Fix bfin_sir IRDA driver build, from Sonic Zhang. 4) AF_PACKET mmap() tests a flag in the TX ring shared between userspace and the kernel for an internal consistency check. It really shouldn't do this to validate the kernel's own behavior because the user can corrupt it to be any value at all. From Daniel Borkmann. 5) Fix TCP metrics leak on netns dismantle, from Eric Dumazet. 6) Orphan the anonymous TCP socket from the SKB in ip_send_unicast_reply() so that the rest of the stack needn't see it. Otherwise we get selinux problems of all sorts, from Eric Dumazet. This is the best way to fix this since the socket is just a place holder for sending packets in a context where we have no real socket at all. 7) Fix TUN detach crashes, from Stanislav Kinsbursky. 8) dev_set_alias() leaks memory on krealloc() failure, from Alexey Khoroshilov. 9) FIB trie must use call_rcu() not call_rcu_bh(), because this code is not universally invoked from software interrupts. From Eric Dumazet. 10) PPTP looks up ipv4 routes with the wrong network namespace, fix from Gao Feng." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) bnx2x: Fix compiler warnings af_packet: remove BUG statement in tpacket_destruct_skb macvtap: rcu_dereference outside read-lock section codel: refine one condition to avoid a nul rec_inv_sqrt ixgbe: add missing braces ipv4: fix ip_send_skb() net: tcp: ipv6_mapped needs sk_rx_dst_set method ipv4: tcp: unicast_sock should not land outside of TCP stack bnx2x: Fix recovery flow cleanup during probe bnx2x: fix unload previous driver flow when flr-capable tun: don't zeroize sock->file on detach igb: Fix register defines for all non-82575 hardware e1000e: fix panic while dumping packets on Tx hang with IOMMU igb: fix panic while dumping packets on Tx hang with IOMMU tcp: must free metrics at net dismantle net/stmmac: mark probe function as __devinit lpc_eth: remove obsolete ifdefs net/core: Fix potential memory leak in dev_set_alias() cdc-phonet: Don't leak in usbpn_open batman-adv: Fix mem leak in the batadv_tt_local_event() function ...
2012-08-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull tcm_vhost level target fabric driver from Nicholas Bellinger: "Here is the PULL request for the initial merge of tcm_vhost based on RFC-v5 code with MST's ACK appended to the initial merge commit." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: tcm_vhost: Initial merge for vhost level target fabric driver
2012-08-13dma: tegra: enable/disable dma clockLaxman Dewangan
Enable the DMA clock when allocating channel and disable clock when freeing channels. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-12bnx2x: Fix compiler warningsJoren Van Onder
Fix the following compiler warnings: - drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:2908:3: warning: comparison of distinct pointer types lacks a cast [enabled by default] - drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:1709:7: warning: comparison of distinct pointer types lacks a cast [enabled by default] Signed-off-by: Joren Van Onder <joren.vanonder@gmail.com> Acked-By: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12macvtap: rcu_dereference outside read-lock sectionDenis Efremov
rcu_dereference occurs in update section. Replacement by rcu_dereference_protected in order to prevent lockdep complaint. Found by Linux Driver Verification project (linuxtesting.org) Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12Merge tag 'gpio-fixes-v3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: - Fix a resource leak in the SCH driver - Fix the register address calculation in the MSIC driver - Fix the PXA driver's devicetree functions - Delete redundant shadow variable leftovers in the MXC driver - Specify the GPIO base for the device tree probe in the MXC driver - Add a modalias for the i.MX driver - Fix off-by-one bug in the Samsung driver - Fix erroneous errorpath in the Langwell driver * tag 'gpio-fixes-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: drivers/gpio/gpio-langwell.c: fix error return code gpio: samsung: Fix off-by-one bug in gpio addresses ARM: dts: imx: add alias for gpio gpio/mxc: specify gpio base for device tree probe gpio/mxc: remove redundant shadow variables initialization GPIO: gpio-pxa: fix devicetree functions gpio: msic: Fix calculating register address in msic_gpio_to_oreg() gpio-sch: Fix leak of resource
2012-08-12Merge tag 'pm-for-3.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael J. Wysocki: - Fix for two recent regressions in the generic PM domains framework. - Revert of a commit that introduced a resume regression and is conceptually incorrect in my opinion. - Fix for a return value in pcc-cpufreq.c from Julia Lawall. - RTC wakeup signaling fix from Neil Brown. - Suppression of compiler warnings for CONFIG_PM_SLEEP unset in ACPI, platform/x86 and TPM drivers. * tag 'pm-for-3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tpm_tis / PM: Fix unused function warning for CONFIG_PM_SLEEP platform / x86 / PM: Fix unused function warnings for CONFIG_PM_SLEEP ACPI / PM: Fix unused function warnings for CONFIG_PM_SLEEP Revert "NMI watchdog: fix for lockup detector breakage on resume" PM: Make dev_pm_get_subsys_data() always return 0 on success drivers/cpufreq/pcc-cpufreq.c: fix error return code RTC: Avoid races between RTC alarm wakeup and suspend.
2012-08-12Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc bug fixes from Arnd Bergmann: "These are a bunch of bug fixes that came in after the merge window and one update for the MAINTAINERS file. The largest part of the fixes are patches that address bugs found by building all the ARM defconfig files. There are a lot more warnings that we have patches for, but the others are either still under discussion or are harmless and do not cause actual problems besides making the build slightly noisy." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits) ARM: davinci: remove broken ntosd2_init_i2c ARM: s3c24xx: enable CONFIG_BUG for tct_hammer omap-rng: fix use of SIMPLE_DEV_PM_OPS spi/s3c64xx: improve error handling mtd/omap2: fix dmaengine_slave_config error handling gpio: em: do not discard em_gio_irq_domain_cleanup ARM: exynos: exynos_pm_add_dev_to_genpd may be unused ARM: imx: gpmi-nand depends on mxs-dma ARM: integrator: include <linux/export.h> ARM: s3c24xx: use new PWM driver ARM: sa1100: include linux/io.h in hackkit leds code Input: eeti_ts: pass gpio value instead of IRQ ARM: pxa: remove irq_to_gpio from ezx-pcap driver ARM: tegra: more regulator fixes for Harmony usb/ohci-omap: remove unused variable mfd/asic3: fix asic3_mfd_probe return value ARM: kirkwood: fix typo in Makefile.boot i.MX27: Fix emma-prp and csi clocks. ARM: integrator: use clk_prepare_enable() for timer MAINTAINERS: update entry for Linus Walleij ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 13:36:41 +0000