summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2010-10-29b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmdLarry Finger
On module removal, the sdio version of b43 generates the following warning: [ 851.560519] ------------[ cut here ]------------ [ 851.560531] WARNING: at drivers/mmc/core/core.c:237 mmc_wait_for_cmd+0x88/0x90() [ 851.560534] Hardware name: 20552PG [ 851.560536] Modules linked in: b43(-) ssb mmc_block binfmt_misc rfcomm sco bnep ppdev l2cap ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp kvm_intel kvm arc4 iwlagn snd_hda_codec_conexant snd_hda_intel snd_hda_codec iwlcore snd_hwdep snd_pcm thinkpad_acpi mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq r852 joydev snd_timer sm_common pcmcia nand snd_seq_device cfg80211 sdhci_pci btusb psmouse tpm_tis yenta_socket nand_ids lp snd pcmcia_rsrc nand_ecc bluetooth sdhci tpm pcmcia_core parport mtd snd_page_alloc serio_raw tpm_bios soundcore nvram led_class sha256_generic aes_i586 aes_generic dm_crypt i915 drm_kms_helper drm ahci intel_agp i2c_algo_bit intel_gtt e1000e libahci video agpgart output [ 851.560620] Pid: 2504, comm: rmmod Not tainted 2.6.36-titan0+ #1 [ 851.560622] Call Trace: [ 851.560631] [<c014a102>] warn_slowpath_common+0x72/0xa0 [ 851.560636] [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90 [ 851.560641] [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90 [ 851.560645] [<c014a152>] warn_slowpath_null+0x22/0x30 [ 851.560649] [<c04d94c8>] mmc_wait_for_cmd+0x88/0x90 [ 851.560655] [<c0401585>] ? device_release+0x25/0x80 [ 851.560660] [<c04df210>] mmc_io_rw_direct_host+0xa0/0x150 [ 851.560665] [<c04df370>] mmc_io_rw_direct+0x30/0x40 [ 851.560669] [<c04e06e7>] sdio_disable_func+0x37/0xa0 [ 851.560683] [<f8dfcb80>] b43_sdio_remove+0x30/0x50 [b43] [ 851.560687] [<c04df8cc>] sdio_bus_remove+0x1c/0x60 [ 851.560692] [<c016d39f>] ? blocking_notifier_call_chain+0x1f/0x30 [ 851.560697] [<c0404991>] __device_release_driver+0x51/0xb0 [ 851.560701] [<c0404a7f>] driver_detach+0x8f/0xa0 [ 851.560705] [<c0403c83>] bus_remove_driver+0x63/0xa0 [ 851.560709] [<c0405039>] driver_unregister+0x49/0x80 [ 851.560713] [<c0405039>] ? driver_unregister+0x49/0x80 [ 851.560718] [<c04dfad7>] sdio_unregister_driver+0x17/0x20 [ 851.560727] [<f8dfcb42>] b43_sdio_exit+0x12/0x20 [b43] [ 851.560734] [<f8dfe76f>] b43_exit+0x17/0x3c [b43] [ 851.560740] [<c017fb8d>] sys_delete_module+0x13d/0x200 [ 851.560747] [<c01fd7d2>] ? do_munmap+0x212/0x300 [ 851.560752] [<c010311f>] sysenter_do_call+0x12/0x28 [ 851.560757] ---[ end trace 31e14488072d2f7d ]--- [ 851.560759] ------------[ cut here ]------------ The warning is caused by b43 not claiming the device before calling sdio_disable_func(). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Arnd Hannemann <arnd@arndnet.de> Tested-by: Arnd Hannemann <arnd@arndnet.de> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-29libertas: Fix sd8686 firmware reloadPaul Fox
For the SD8686, we cannot rely on the scratch register to read the firmware load status, because the same register is used for storing RX packet length. Broaden the check to account for this. The module can now be unloaded/reloaded successfully. Based on the implementation from libertas_tf. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Steve deRosier <steve@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-29ath9k: Fix incorrect access of rate flags in RCMohammed Shafi Shajakhan
The index variable to access the rate flags should be obtained from the inner loop counter which corresponds to the rate table structure.This fixes the invalid rate selection i.e when the supported basic rate is invalid on a particular band and also the following warning message. Thanks to Raj for finding this out. Call Trace: [<ffffffff8104ee4a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff8104ee95>] warn_slowpath_null+0x15/0x20 [<ffffffffa0583c45>] ath_get_rate+0x595/0x5b0 [ath9k] [<ffffffff811a0636>] ? cpumask_next_and+0x36/0x50 [<ffffffffa0405186>] rate_control_get_rate+0x86/0x160 [mac80211] [<ffffffffa040dfac>] invoke_tx_handlers+0x81c/0x12d0 [mac80211] [<ffffffffa040eae9>] ieee80211_tx+0x89/0x2b0 [mac80211] [<ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0 [<ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211] [<ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211] [<ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211] [<ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150 [mac80211] [<ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0 [<ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211] [<ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211] [<ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211] [<ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150 [mac80211] [<ffffffffa03f8896>] ieee80211_scan_work+0x146/0x600 [mac80211] [<ffffffff8133a375>] ? schedule+0x2f5/0x8e0 [<ffffffffa03f8750>] ? ieee80211_scan_work+0x0/0x600 [mac80211] [<ffffffff81064fcf>] process_one_work+0x10f/0x380 [<ffffffff81066bc2>] worker_thread+0x162/0x340 [<ffffffff81066a60>] ? worker_thread+0x0/0x340 Cc: stable@kernel.org Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-27ath5k: Fix double free on hw attach error pathJones Desougi
If ath5k_hw_attach fails it will free sc->ah (local variable ah) before returning. However, when it reports failure the caller (ath5k_pci_probe) will also free sc->ah. Let the caller handle the deallocation, it does so on further errors as well. Signed-off-by: Jones Desougi <jones.desougi@27m.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-27ath9k_htc: Set proper firmware offset for Netgear WNDA3200Rajkumar Manoharan
Netgear WNDA3200 device uses ar7010 firmware but it is failed to set correct firmware offset on firmware download which causes device initialization failure. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-27ath9k: fix tx aggregation flush on AR9003Felix Fietkau
Completing aggregate frames can lead to new buffers being pushed into the tid queues due to software retransmission. When the tx queues are being drained, all pending aggregates must be completed before the tid queues get drained, otherwise buffers might be leaked. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-27ath9k: lock reset and PCU start/stoppingLuis R. Rodriguez
Apart from locking the start and stop PCU we need to ensure we also content starting and stopping the PCU between hardware resets. This is part of a series that will help resolve the bug: https://bugzilla.kernel.org/show_bug.cgi?id=14624 For more details about this issue refer to: http://marc.info/?l=linux-wireless&m=128629803703756&w=2 Cc: stable@kernel.org Cc: Ben Greear <greearb@candelatech.com> Cc: Kyungwan Nam <kyungwan.nam@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-27ath9k: rename rxflushlock to pcu_lockLuis R. Rodriguez
The real way to lock RX is to contend on the PCU and reset, this will be fixed in the next patch but for now just do the renames so that the next patch which changes the locking order is crystal clear. This is part of a series that will help resolve the bug: https://bugzilla.kernel.org/show_bug.cgi?id=14624 For more details about this issue refer to: http://marc.info/?l=linux-wireless&m=128629803703756&w=2 Cc: stable@kernel.org Cc: Ben Greear <greearb@candelatech.com> Cc: Kyungwan Nam <kyungwan.nam@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-27ath9k: add locking for starting the PCU on RXLuis R. Rodriguez
There was some locking for starting some parts of RX but not for starting the PCU. Include this otherwise we can content against stopping the PCU. This can potentially lead to races against different buffers on the PCU which can lead to to the DMA RX engine writing to buffers which are already freed. This is part of a series that will help resolve the bug: https://bugzilla.kernel.org/show_bug.cgi?id=14624 For more details about this issue refer to: http://marc.info/?l=linux-wireless&m=128629803703756&w=2 Cc: stable@kernel.org Cc: Ben Greear <greearb@candelatech.com> Cc: Kyungwan Nam <kyungwan.nam@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-27ath9k: add locking for stopping RXLuis R. Rodriguez
ath9k locks for starting RX but not for stopping RX. We could potentially run into a situation where tried to stop RX but immediately started RX. This allows for races on the the RX engine deciding what buffer we last left off on and could potentially cause ath9k to DMA into already free'd memory or in the worst case at a later time to already given memory to other drivers. Fix this by locking stopping RX. This is part of a series that will help resolve the bug: https://bugzilla.kernel.org/show_bug.cgi?id=14624 For more details about this issue refer to: http://marc.info/?l=linux-wireless&m=128629803703756&w=2 Cc: stable@kernel.org Cc: Ben Greear <greearb@candelatech.com> Cc: Kyungwan Nam <kyungwan.nam@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25iwlwifi: quiet a noisy printkDon Fry
Timing issues in microcode for some devices can cause a compressed BA to be sent to the driver prior to returning any a-MPDU notification. Traces show RTS-CTS is exchanged and then the timer fires which causes an empty BA to be sent which acknowledges nothing. This results in a noisy printk. Only print the message if the bitmap is non-zero. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: resume aggregation immediately after a hardware resetFelix Fietkau
Since aggregation is usually triggered by tx completion, a hardware reset (because of beacon stuck, tx hang or baseband hang) can significantly delay the transmission of the next AMPDU (until the next tx completion event). Fix this by rescheduling aggregation after such a reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix scheduling while atomicChristian Lamparter
This patch fixes the following mishap: BUG: scheduling while atomic: wpa_supplicant/4164/0x00000002 Modules linked in: carl9170 mac80211 [...] Pid: 4164, comm: wpa_supplicant Not tainted 2.6.36-wl+ #119 Call Trace: [<c13779a9>] ? schedule+0x349/0x4c0 [<c13780d6>] ? schedule_timeout+0x106/0x1e0 [<c1037f50>] ? process_timeout+0x0/0x10 [<c1377e8d>] ? wait_for_common+0x9d/0x140 [<c1029110>] ? default_wake_function+0x0/0x10 [<f80c6080>] ? carl9170_exec_cmd+0xf0/0x250 [carl9170] [<f80c695e>] ? carl9170_set_mac_reg+0x5e/0x70 [carl9170] [<f80c3f76>] ? carl9170_op_add_interface+0x176/0x310 [carl9170] [...] rcu_read_unlock() call was erroneously placed after the sync. function carl9170_mod_virtual_mac. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25b43: N-PHY: fix infinite-loop-typoRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25wl1251: fix module namesGrazvydas Ignotas
The wl1251 move accidently renamed wl1251_sdio and wl1251_spi modules to just sdio and spi. Restore proper module names. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: fix handling of rate control probe framesFelix Fietkau
The ath9k aggregation code was already checking the rate control probe flag to prevent starting an aggregate frame with a sampling rate. What was missing was closing an aggregate before adding a probing frame to it. Without that, rate control cannot have precise control over probing, which delays using faster rates when the channel conditions improve. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: fix crash in ath_update_survey_statsFelix Fietkau
If ah->curchan is uninitialized, the channel index is bogus, which leads to invalid memory access when the cycle counters are updated. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k_hw: Fix divide by zero cases in paprd.Senthil Balasubramanian
We are not handling all divide by zero cases in paprd. Add additional checks for divide by zero cases in papard. This patch has fixes intended for kernel 2.6.36. Cc: stable@kernel.org Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k_hw: Fix TX carrier leakage for IEEE compliance on AR9003 2.2Luis R. Rodriguez
This updates the initvals for the AR9003 2.2 chipsets. The initvals are the initial register values we use for our registers upon hardware reset. This synchs up the initvals to match what our latest recommendation from our systems engineering team. The description of changes in this update: Improves ability to support very strong Rx conditions. Enhances DFS support for AP-mode. Improves performance of Tx carrier leak calibration. Adds support for Japan channel 14 Tx filtering requirements. Improves Tx power accuracy. Impact: Update required to address degraded throughput at very short range. Update required for AP-mode DFS certification. Update required to comply to IEEE Tx carrier leak specification. May not meet expected +/- 2 dB Tx power accuracy without update. The most important fix here would be the TX carrier leakage required to comply with IEEE 802.11 specifications. The group of changes have been tested all together in one release. References: Osprey 2.2 header file ver #33 Checksums: $ ./initvals -f ar9003-2p2 0x000000004a488fc7 ar9300_2p2_radio_postamble 0x0000000046cb1300 ar9300Modes_lowest_ob_db_tx_gain_table_2p2 0x00000000e912711f ar9300Modes_fast_clock_2p2 0x0000000037ac0ee8 ar9300_2p2_radio_core 0x00000000047a7700 ar9300Common_rx_gain_table_merlin_2p2 0x0000000003f783bb ar9300_2p2_mac_postamble 0x00000000301fc841 ar9300_2p2_soc_postamble 0x000000005ec8075f ar9200_merlin_2p2_radio_core 0x0000000083372ffa ar9300_2p2_baseband_postamble 0x00000000c4f59974 ar9300_2p2_baseband_core 0x00000000e20d2e72 ar9300Modes_high_power_tx_gain_table_2p2 0x000000007fd55c70 ar9300Modes_high_ob_db_tx_gain_table_2p2 0x0000000029495000 ar9300Common_rx_gain_table_2p2 0x0000000042cb1300 ar9300Modes_low_ob_db_tx_gain_table_2p2 0x00000000c4739cd6 ar9300_2p2_mac_core 0x000000003521a300 ar9300Common_wo_xlna_rx_gain_table_2p2 0x00000000a15ccf1b ar9300_2p2_soc_preamble 0x0000000029734396 ar9300PciePhy_pll_on_clkreq_disable_L1_2p2 0x000000002d834396 ar9300PciePhy_clkreq_enable_L1_2p2 0x0000000029834396 ar9300PciePhy_clkreq_disable_L1_2p2 $ ./initvals -f ar9003-2p2 | sha1sum 0ceddb5cf66737610fb51f04cf3e9ff71870c7b4 - Cc: stable@kernel.org Cc: Yixiang Li <yixiang.li@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix memory leak issue in async cmd macro wrappersChristian Lamparter
This patch continues where the previous commit: "carl9170: fix async command buffer leak" left off. Similar to carl9170_reboot/carl9170_powersave, the carl9170_async_regwrite* macros would leak the temporary command buffer, if __carl9170_exec_cmd fails to upload the command to the device. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix async command buffer leakChristian Lamparter
If __carl9170_exec_cmd fails to upload an asynchronous command to the device, the functions: carl9170_reboot and carl9170_powersave will leak the temporary command assembly buffer. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath5k: Properly initialize ath_common->cc_lock.Ben Greear
Otherwise, lockdep splats, at the least: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 0, comm: swapper Not tainted 2.6.36-rc8-wl+ #32 Call Trace: [<c075d940>] ? printk+0xf/0x17 [<c045507a>] register_lock_class+0x5a/0x29e [<c0456af5>] __lock_acquire+0xa2/0xb8c [<c0455be2>] ? mark_lock+0x1e/0x1de [<c041a540>] ? acpi_get_override_irq+0x85/0x8c [<c0455536>] ? trace_hardirqs_off+0xb/0xd [<c0457639>] lock_acquire+0x5a/0x78 [<f8126835>] ? ath5k_ani_calibration+0x24/0x52b [ath5k] [<c075f6ed>] _raw_spin_lock_bh+0x20/0x2f [<f8126835>] ? ath5k_ani_calibration+0x24/0x52b [ath5k] [<f8126835>] ath5k_ani_calibration+0x24/0x52b [ath5k] [<c0438f99>] ? tasklet_action+0x3b/0xc6 [<f8123c2b>] ath5k_tasklet_ani+0x18/0x22 [ath5k] [<c0438fd1>] tasklet_action+0x73/0xc6 [<c043945f>] __do_softirq+0x86/0x111 [<c0439520>] do_softirq+0x36/0x5a [<c0439659>] irq_exit+0x35/0x69 [<c0403fb9>] do_IRQ+0x86/0x9a [<c04034ee>] common_interrupt+0x2e/0x40 [<c045007b>] ? do_adjtimex+0x223/0x55e [<c0408245>] ? mwait_idle+0x5c/0x6c [<c040227f>] cpu_idle+0x4e/0x6b [<c074b6e9>] rest_init+0x8d/0x92 [<c09758ea>] start_kernel+0x320/0x325 [<c09750d0>] i386_start_kernel+0xd0/0xd7 Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: Properly initialize ath_common->cc_lock.Ben Greear
Otherwise, lockdep splats, at the least: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2240, comm: ip Not tainted 2.6.36-rc8-wl+ #32 Call Trace: [<c075d940>] ? printk+0xf/0x17 [<c045507a>] register_lock_class+0x5a/0x29e [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0456af5>] __lock_acquire+0xa2/0xb8c [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0457639>] lock_acquire+0x5a/0x78 [<f8c5115b>] ? ath9k_config+0x274/0x3d8 [ath9k] [<c075f602>] _raw_spin_lock_irqsave+0x2f/0x3f [<f8c5115b>] ? ath9k_config+0x274/0x3d8 [ath9k] [<f8c5115b>] ath9k_config+0x274/0x3d8 [ath9k] [<f8c0ba2e>] ieee80211_hw_config+0x11b/0x125 [mac80211] [<f8c17edf>] ieee80211_do_open+0x3c5/0x466 [mac80211] [<f8c171d6>] ? ieee80211_check_concurrent_iface+0x21/0x13a [mac80211] [<f8c17fdb>] ieee80211_open+0x5b/0x5e [mac80211] [<c06ce76b>] __dev_open+0x80/0xae [<c06cc99b>] __dev_change_flags+0xa0/0x115 [<c06ce6bf>] dev_change_flags+0x13/0x3f [<c06d7e78>] do_setlink+0x23a/0x51b [<c0455037>] ? register_lock_class+0x17/0x29e [<c06d847c>] rtnl_newlink+0x269/0x431 [<c06d8291>] ? rtnl_newlink+0x7e/0x431 [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0455de9>] ? mark_held_locks+0x47/0x5f [<c075ebcf>] ? __mutex_lock_common+0x2bb/0x2d6 [<c0456045>] ? trace_hardirqs_on_caller+0x104/0x125 [<c075ebe0>] ? __mutex_lock_common+0x2cc/0x2d6 [<c06d8213>] ? rtnl_newlink+0x0/0x431 [<c06d79e2>] rtnetlink_rcv_msg+0x182/0x198 [<c06d7860>] ? rtnetlink_rcv_msg+0x0/0x198 [<c06e503c>] netlink_rcv_skb+0x30/0x77 [<c06d7859>] rtnetlink_rcv+0x1b/0x22 [<c06e4e77>] netlink_unicast+0xbe/0x119 [<c06e5a15>] netlink_sendmsg+0x234/0x24c [<c06bf93a>] __sock_sendmsg+0x51/0x5a [<c06bfba4>] sock_sendmsg+0x93/0xa7 [<c04968cf>] ? might_fault+0x47/0x81 [<c0496904>] ? might_fault+0x7c/0x81 [<c06c7904>] ? copy_from_user+0x8/0xa [<c06c7c2d>] ? verify_iovec+0x3e/0x6d [<c06bfd8c>] sys_sendmsg+0x149/0x193 [<c0455037>] ? register_lock_class+0x17/0x29e [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0498d7a>] ? __do_fault+0x1fc/0x3a5 [<c048690a>] ? unlock_page+0x40/0x43 [<c0498ef7>] ? __do_fault+0x379/0x3a5 [<c04576dd>] ? lock_release_non_nested+0x86/0x1d8 [<c04968cf>] ? might_fault+0x47/0x81 [<c04968cf>] ? might_fault+0x47/0x81 [<c06c148b>] sys_socketcall+0x15e/0x1a5 [<c0402f1c>] sysenter_do_call+0x12/0x38 Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-24Merge branch 'devel' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac * 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac: (25 commits) i7300_edac: Properly initialize per-csrow memory size V4L/DVB: i7300_edac: better initialize page counts MAINTAINERS: Add maintainer for i7300-edac driver i7300-edac: CodingStyle cleanup i7300_edac: Improve comments i7300_edac: Cleanup: reorganize the file contents i7300_edac: Properly detect channel on CE errors i7300_edac: enrich FBD error info for corrected errors i7300_edac: enrich FBD error info for fatal errors i7300_edac: pre-allocate a buffer used to prepare err messages i7300_edac: Fix MTR x4/x8 detection logic i7300_edac: Make the debug messages coherent with the others i7300_edac: Cleanup: remove get_error_info logic i7300_edac: Add a code to cleanup error registers i7300_edac: Add support for reporting FBD errors i7300_edac: Properly detect the type of error correction i7300_edac: Detect if the device is on single mode i7300_edac: Adds detection for enhanced scrub mode on x8 i7300_edac: Clear the error bit after reading i7300_edac: Add error detection code for global errors ...
2010-10-24Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits) KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages KVM: Fix signature of kvm_iommu_map_pages stub KVM: MCE: Send SRAR SIGBUS directly KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED KVM: fix typo in copyright notice KVM: Disable interrupts around get_kernel_ns() KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address KVM: MMU: move access code parsing to FNAME(walk_addr) function KVM: MMU: audit: check whether have unsync sps after root sync KVM: MMU: audit: introduce audit_printk to cleanup audit code KVM: MMU: audit: unregister audit tracepoints before module unloaded KVM: MMU: audit: fix vcpu's spte walking KVM: MMU: set access bit for direct mapping KVM: MMU: cleanup for error mask set while walk guest page table KVM: MMU: update 'root_hpa' out of loop in PAE shadow path KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn() KVM: x86: Fix constant type in kvm_get_time_scale KVM: VMX: Add AX to list of registers clobbered by guest switch KVM guest: Move a printk that's using the clock before it's ready KVM: x86: TSC catchup mode ...
2010-10-24Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-viapro: Don't log nacks i2c/pca954x: Remove __devinit and __devexit from probe and remove functions MAINTAINERS: Add maintainer for PCA9541 I2C bus master selector driver i2c/mux: Driver for PCA9541 I2C Master Selector i2c: Optimize function i2c_detect() i2c: Discard warning message on device instantiation from user-space i2c-amd8111: Add proper error handling i2c: Change to new flag variable i2c: Remove unneeded inclusions of <linux/i2c-id.h> i2c: Let i2c_parent_is_i2c_adapter return the parent adapter i2c: Simplify i2c_parent_is_i2c_adapter i2c-pca-platform: Change device name of request_irq i2c: Fix Kconfig dependencies
2010-10-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (47 commits) HID: fix mismerge in hid-lg HID: hidraw: fix window in hidraw_release HID: hid-sony: override usbhid_output_raw_report for Sixaxis HID: add absolute axis resolution calculation HID: force feedback support for Logitech RumblePad gamepad HID: support STmicroelectronics and Sitronix with hid-stantuml driver HID: magicmouse: Adjust major / minor axes to scale HID: Fix for problems with eGalax/DWAV multi-touch-screen HID: waltop: add support for Waltop Slim Tablet 12.1 inch HID: add NOGET quirk for AXIS 295 Video Surveillance Joystick HID: usbhid: remove unused hiddev_driver HID: magicmouse: Use hid-input parsing rather than bypassing it HID: trivial formatting fix HID: Add support for Logitech Speed Force Wireless gaming wheel HID: don't Send Feature Reports on Interrupt Endpoint HID: 3m: Adjust major / minor axes to scale HID: 3m: Correct touchscreen emulation HID: 3m: Convert to MT slots HID: 3m: Output proper orientation range HID: 3m: Adjust to sequential MT HID protocol ...
2010-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Makefile - replace the use of <module>-objs with <module>-y crypto: hifn_795x - use cancel_delayed_work_sync() crypto: talitos - sparse check endian fixes crypto: talitos - fix checkpatch warning crypto: talitos - fix warning: 'alg' may be used uninitialized in this function crypto: cryptd - Adding the AEAD interface type support to cryptd crypto: n2_crypto - Niagara2 driver needs to depend upon CRYPTO_DES crypto: Kconfig - update broken web addresses crypto: omap-sham - Adjust DMA parameters crypto: fips - FIPS requires algorithm self-tests crypto: omap-aes - OMAP2/3 AES hw accelerator driver crypto: updates to enable omap aes padata: add missing __percpu markup in include/linux/padata.h MAINTAINERS: Add maintainer entries for padata/pcrypt
2010-10-24i2c-viapro: Don't log nacksJean Delvare
Transactions not acked can happen every now and then, in particular during device detection, and various transaction types can be used for this purpose. So stop logging this event, except when debugging is enabled. This is what other similar drivers (e.g. i2c-i801 or i2c-piix4) do. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c/pca954x: Remove __devinit and __devexit from probe and remove functionsGuenter Roeck
The underlying I2C adapter may or may not be present when this driver gets initialized, and may disappear later, so there is no safe time at which the probe and remove functions can be discarded. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c/mux: Driver for PCA9541 I2C Master SelectorGuenter Roeck
This patch adds support for PCA9541, an I2C Bus Master Selector. The driver is modeled as single channel I2C Multiplexer to be able to utilize the I2C multiplexer framework. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Optimize function i2c_detect()Jean Delvare
Check the class flags before allocating the temporary i2c_client structure, to avoid allocating it when we don't need it. Also optimize the inner loop a bit. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
2010-10-24i2c: Discard warning message on device instantiation from user-spaceJean Delvare
The "new_device" sysfs interface has been there for quite some time now, nobody complained about it so it must be good enough. Time to remove the warning and call it stable. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c-amd8111: Add proper error handlingJulia Lawall
The functions the functions amd_ec_wait_write and amd_ec_wait_read have an unsigned return type, but return a negative constant to indicate an error condition. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Fixing amd_ec_wait_write and amd_ec_wait_read leads to the need to adjust the return type of the functions amd_ec_write and amd_ec_read, which are the only functions that call amd_ec_wait_write and amd_ec_wait_read. amd_ec_write and amd_ec_read, in turn, are only called from within the function amd8111_access, which already returns a signed typed value. Each of the calls to amd_ec_write and amd_ec_read are updated using the following semantic patch: // <smpl> @@ @@ + status = amd_ec_write - amd_ec_write (...); + if (status) return status; @@ @@ + status = amd_ec_read - amd_ec_read (...); + if (status) return status; // </smpl> The patch also adds the declaration of the status variable. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Remove unneeded inclusions of <linux/i2c-id.h>Jean Delvare
These drivers don't use anything which is defined in <linux/i2c-id.h>. This header file was never meant to be included directly anyway, and will be deleted soon. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Dave Airlie <airlied@linux.ie> Cc: Hans Verkuil <hverkuil@xs4all.nl>
2010-10-24i2c: Let i2c_parent_is_i2c_adapter return the parent adapterJean Delvare
This makes the calling site's code clearer IMHO. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-10-24i2c-pca-platform: Change device name of request_irqNobuhiro Iwamatsu
i2c->adap.name shouldn't be used in request_irq. Instead the driver name "i2c-pca-platform" should be used. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Fix Kconfig dependenciesJean Delvare
drivers/i2c/algos/Kconfig makes all the algorithms dependent on !I2C_HELPER_AUTO, which triggers a Kconfig warning about broken dependencies when some driver selects one of the algorithms. Ideally we would make only the prompts dependent on !I2C_HELPER_AUTO, however Kconfig doesn't currently support that. So we have to redefine the symbols separately for the I2C_HELPER_AUTO=y case. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michal Marek <mmarek@suse.cz>
2010-10-24KVM: S390: Add virtio hotplug add supportAlexander Graf
The one big missing feature in s390-virtio was hotplugging. This is no more. This patch implements hotplug add support, so you can on the fly add new devices in the guest. Keep in mind that this needs a patch for qemu to actually leverage the functionality. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: S390: take a full byte as ext_param indicatorAlexander Graf
Currenty the ext_param field only distinguishes between "config change" and "vring interrupt". We can do a lot more with it though, so let's enable a full byte of possible values and constants to #defines while at it. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-23HID: fix mismerge in hid-lgJiri Kosina
Fix wrong merge in hid-lg -- report fixup functions now get pointer to rdesc. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-23Merge branch 'waltop' into for-linusJiri Kosina
2010-10-23Merge branch 'uc-logic' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-ids.h drivers/hid/hid-lg.c drivers/hid/usbhid/hid-quirks.c
2010-10-23Merge branches '3m', 'egalax', 'logitech', 'magicmouse', 'ntrig' and ↵Jiri Kosina
'roccat' into for-linus
2010-10-23Merge branches 'upstream' and 'upstream-fixes' into for-linusJiri Kosina
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits) bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL. vlan: Calling vlan_hwaccel_do_receive() is always valid. tproxy: use the interface primary IP address as a default value for --on-ip tproxy: added IPv6 support to the socket match cxgb3: function namespace cleanup tproxy: added IPv6 support to the TPROXY target tproxy: added IPv6 socket lookup function to nf_tproxy_core be2net: Changes to use only priority codes allowed by f/w tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled tproxy: added tproxy sockopt interface in the IPV6 layer tproxy: added udp6_lib_lookup function tproxy: added const specifiers to udp lookup functions tproxy: split off ipv6 defragmentation to a separate module l2tp: small cleanup nf_nat: restrict ICMP translation for embedded header can: mcp251x: fix generation of error frames can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set can-raw: add msg_flags to distinguish local traffic 9p: client code cleanup rds: make local functions/variables static ... Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-22Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kdb,debug_core: adjust master cpu switch logic against new debug_core locking debug_core: refactor locking for master/slave cpus x86,kgdb: remove unnecessary call to kgdb_correct_hw_break() debug_core: disable hw_breakpoints on all cores in kgdb_cpu_enter() kdb,kgdb: fix sparse fixups kdb: Fix oops in kdb_unregister kdb,ftdump: Remove reference to internal kdb include kdb: Allow kernel loadable modules to add kdb shell functions debug_core: stop rcu warnings on kernel resume debug_core: move all watch dog syncs to a single function x86,kgdb: fix debugger hw breakpoint test regression in 2.6.35
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits) USB: mct_u232: fix broken close USB: gadget: amd5536udc.c: fix error path USB: imx21-hcd - fix off by one resource size calculation usb: gadget: fix Kconfig warning usb: r8a66597-udc: Add processing when USB was removed. mxc_udc: add workaround for ENGcm09152 for i.MX35 USB: ftdi_sio: add device ids for ScienceScope USB: musb: AM35x: Workaround for fifo read issue USB: musb: add musb support for AM35x USB: AM35x: Add musb support usb: Fix linker errors with CONFIG_PM=n USB: ohci-sh - use resource_size instead of defining its own resource_len macro USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro USB: xhci: Fix compile error when CONFIG_PM=n USB: accept some invalid ep0-maxpacket values USB: xHCI: PCI power management implementation USB: xHCI: bus power management implementation USB: xHCI: port remote wakeup implementation USB: xHCI: port power management implementation ... Manually fix up (non-data) conflict: the SCSI merge gad renamed the 'hw_sector_size' member to 'physical_block_size', and the USB tree brought a new use of it.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-06 09:20:25 +0000