summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2012-03-20Merge tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds
Pull USB merge for 3.4-rc1 from Greg KH: "Here's the big USB merge for the 3.4-rc1 merge window. Lots of gadget driver reworks here, driver updates, xhci changes, some new drivers added, usb-serial core reworking to fix some bugs, and other various minor things. There are some patches touching arch code, but they have all been acked by the various arch maintainers." * tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (302 commits) net: qmi_wwan: add support for ZTE MF820D USB: option: add ZTE MF820D usb: gadget: f_fs: Remove lock is held before freeing checks USB: option: make interface blacklist work again usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver USB: ohci-pxa27x: add clk_prepare/clk_unprepare calls USB: use generic platform driver on ath79 USB: EHCI: Add a generic platform device driver USB: OHCI: Add a generic platform device driver USB: ftdi_sio: new PID: LUMEL PD12 USB: ftdi_sio: add support for FT-X series devices USB: serial: mos7840: Fixed MCS7820 device attach problem usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT. usb gadget: fix a section mismatch when compiling g_ffs with CONFIG_USB_FUNCTIONFS_ETH USB: ohci-nxp: Remove i2c_write(), use smbus USB: ohci-nxp: Support for LPC32xx USB: ohci-nxp: Rename symbols from pnx4008 to nxp USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp usb: gadget: Kconfig: fix typo for 'different' usb: dwc3: pci: fix another failure path in dwc3_pci_probe() ...
2012-03-20Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds
Pull TTY/serial patches from Greg KH: "tty and serial merge for 3.4-rc1 Here's the big serial and tty merge for the 3.4-rc1 tree. There's loads of fixes and reworks in here from Jiri for the tty layer, and a number of patches from Alan to help try to wrestle the vt layer into a sane model. Other than that, lots of driver updates and fixes, and other minor stuff, all detailed in the shortlog." * tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits) serial: pxa: add clk_prepare/clk_unprepare calls TTY: Wrong unicode value copied in con_set_unimap() serial: PL011: clear pending interrupts serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset. vt: NULL dereference in vt_do_kdsk_ioctl() tty: serial: vt8500: fix annotations for probe/remove serial: remove back and forth conversions in serial_out_sync serial: use serial_port_in/out vs serial_in/out in 8250 serial: introduce generic port in/out helpers serial: reduce number of indirections in 8250 code serial: delete useless void casts in 8250.c serial: make 8250's serial_in shareable to other drivers. serial: delete last unused traces of pausing I/O in 8250 pch_uart: Add module parameter descriptions pch_uart: Use existing default_baud in setup_console pch_uart: Add user_uartclk parameter pch_uart: Add Fish River Island II uart clock quirks pch_uart: Use uartclk instead of base_baud mpc5200b/uart: select more tolerant uart prescaler on low baudrates tty: moxa: fix bit test in moxa_start() ...
2012-03-20Merge tag 'staging-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull big staging driver updates from Greg KH: "Here is the big drivers/staging/ merge for 3.4-rc1 Lots of new driver updates here, with the addition of a few new ones, and only one moving out of the staging tree to the "real" part of the kernel (the hyperv scsi driver, acked by the scsi maintainer). There are also loads of cleanups, fixes, and other minor things in here, all self-contained in the drivers/staging/ tree. Overall we reversed the recent trend by adding more lines than we removed: 379 files changed, 37952 insertions(+), 14153 deletions(-)" * tag 'staging-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (360 commits) staging/zmem: Use lockdep_assert_held instead of spin_is_locked Staging: rtl8187se: r8180_wx.c: Cleaned up comments Staging: rtl8187se: r8180_wx.c: Removed old comments Staging: rtl8187se: r8180_dm.c: Removed old comments Staging: android: ram_console.c: Staging: rtl8187se: r8180_dm.c: Fix comments Staging: rtl8187se: r8180_dm.c: Fix spacing issues Staging: rtl8187se: r8180_dm.c Fixed indentation issues Staging: rtl8187se: r8180_dm.c: Fix brackets Staging: rtl8187se: r8180_dm.c: Removed spaces before tab stop staging: vme: fix section mismatches in linux-next 20120314 Staging: rtl8187se: r8180_core.c: Fix some long line issues Staging: rtl8187se: r8180_core.c: Fix some spacing issues Staging: rtl8187se: r8180_core.c: Removed trailing spaces staging: mei: remove driver internal versioning Staging: rtl8187se: r8180_core.c: Cleaned up if statement staging: ozwpan depends on NET staging: ozwpan: added maintainer for ozwpan driver staging/mei: propagate error codes up in the write flow drivers:staging:mei Fix some typos in staging/mei ...
2012-03-20Merge tag 'driver-core-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches for 3.4-rc1 from Greg KH: "Here's the big driver core merge for 3.4-rc1. Lots of various things here, sysfs fixes/tweaks (with the nlink breakage reverted), dynamic debugging updates, w1 drivers, hyperv driver updates, and a variety of other bits and pieces, full information in the shortlog." * tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (78 commits) Tools: hv: Support enumeration from all the pools Tools: hv: Fully support the new KVP verbs in the user level daemon Drivers: hv: Support the newly introduced KVP messages in the driver Drivers: hv: Add new message types to enhance KVP regulator: Support driver probe deferral Revert "sysfs: Kill nlink counting." uevent: send events in correct order according to seqnum (v3) driver core: minor comment formatting cleanups driver core: move the deferred probe pointer into the private area drivercore: Add driver probe deferral mechanism DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers w1_bq27000: Only one thread can access the bq27000 at a time. w1_bq27000 - remove w1_bq27000_write w1_bq27000: remove unnecessary NULL test. sysfs: Fix memory leak in sysfs_sd_setsecdata(). intel_idle: Revert change of auto_demotion_disable_flags for Nehalem w1: Fix w1_bq27000 driver-core: documentation: fix up Greg's email address powernow-k6: Really enable auto-loading powernow-k7: Fix CPU family number ...
2012-03-20Merge tag 'char-misc-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char and misc patches for 3.4-rc1 from Greg KH: "Not much here, just a few minor fixes and some conversions to the module_*_driver() functions, making the codebase smaller." * tag 'char-misc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: bmp085: Use unsigned long to store jiffies char/ramoops: included linux/err.h twice misc: bmp085: Handle jiffies overflow correctly misc: fsa9480: Remove obsolete cleanup for clientdata char: Fix typo in tlclk.c char: Fix typo in viotape.c cs5535-mfgpt: don't call __init function from __devinit MISC: convert drivers/misc/* to use module_spi_driver() MISC: convert drivers/misc/* to use module_i2c_driver() MISC: convert drivers/misc/* to use module_platform_driver()
2012-03-20Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes for v3.4 from Ingo Molnar * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) ntp: Fix integer overflow when setting time math: Introduce div64_long cs5535-clockevt: Allow the MFGPT IRQ to be shared cs5535-clockevt: Don't ignore MFGPT on SMP-capable kernels x86/time: Eliminate unused irq0_irqs counter clocksource: scx200_hrt: Fix the build x86/tsc: Reduce the TSC sync check time for core-siblings timer: Fix bad idle check on irq entry nohz: Remove ts->Einidle checks before restarting the tick nohz: Remove update_ts_time_stat from tick_nohz_start_idle clockevents: Leave the broadcast device in shutdown mode when not needed clocksource: Load the ACPI PM clocksource asynchronously clocksource: scx200_hrt: Convert scx200 to use clocksource_register_hz clocksource: Get rid of clocksource_calc_mult_shift() clocksource: dbx500: convert to clocksource_register_hz() clocksource: scx200_hrt: use pr_<level> instead of printk time: Move common updates to a function time: Reorder so the hot data is together time: Remove most of xtime_lock usage in timekeeping.c ntp: Add ntp_lock to replace xtime_locking ...
2012-03-20Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events changes for v3.4 from Ingo Molnar: - New "hardware based branch profiling" feature both on the kernel and the tooling side, on CPUs that support it. (modern x86 Intel CPUs with the 'LBR' hardware feature currently.) This new feature is basically a sophisticated 'magnifying glass' for branch execution - something that is pretty difficult to extract from regular, function histogram centric profiles. The simplest mode is activated via 'perf record -b', and the result looks like this in perf report: $ perf record -b any_call,u -e cycles:u branchy $ perf report -b --sort=symbol 52.34% [.] main [.] f1 24.04% [.] f1 [.] f3 23.60% [.] f1 [.] f2 0.01% [k] _IO_new_file_xsputn [k] _IO_file_overflow 0.01% [k] _IO_vfprintf_internal [k] _IO_new_file_xsputn 0.01% [k] _IO_vfprintf_internal [k] strchrnul 0.01% [k] __printf [k] _IO_vfprintf_internal 0.01% [k] main [k] __printf This output shows from/to branch columns and shows the highest percentage (from,to) jump combinations - i.e. the most likely taken branches in the system. "branches" can also include function calls and any other synchronous and asynchronous transitions of the instruction pointer that are not 'next instruction' - such as system calls, traps, interrupts, etc. This feature comes with (hopefully intuitive) flat ascii and TUI support in perf report. - Various 'perf annotate' visual improvements for us assembly junkies. It will now recognize function calls in the TUI and by hitting enter you can follow the call (recursively) and back, amongst other improvements. - Multiple threads/processes recording support in perf record, perf stat, perf top - which is activated via a comma-list of PIDs: perf top -p 21483,21485 perf stat -p 21483,21485 -ddd perf record -p 21483,21485 - Support for per UID views, via the --uid paramter to perf top, perf report, etc. For example 'perf top --uid mingo' will only show the tasks that I am running, excluding other users, root, etc. - Jump label restructurings and improvements - this includes the factoring out of the (hopefully much clearer) include/linux/static_key.h generic facility: struct static_key key = STATIC_KEY_INIT_FALSE; ... if (static_key_false(&key)) do unlikely code else do likely code ... static_key_slow_inc(); ... static_key_slow_inc(); ... The static_key_false() branch will be generated into the code with as little impact to the likely code path as possible. the static_key_slow_*() APIs flip the branch via live kernel code patching. This facility can now be used more widely within the kernel to micro-optimize hot branches whose likelihood matches the static-key usage and fast/slow cost patterns. - SW function tracer improvements: perf support and filtering support. - Various hardenings of the perf.data ABI, to make older perf.data's smoother on newer tool versions, to make new features integrate more smoothly, to support cross-endian recording/analyzing workflows better, etc. - Restructuring of the kprobes code, the splitting out of 'optprobes', and a corner case bugfix. - Allow the tracing of kernel console output (printk). - Improvements/fixes to user-space RDPMC support, allowing user-space self-profiling code to extract PMU counts without performing any system calls, while playing nice with the kernel side. - 'perf bench' improvements - ... and lots of internal restructurings, cleanups and fixes that made these features possible. And, as usual this list is incomplete as there were also lots of other improvements * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (120 commits) perf report: Fix annotate double quit issue in branch view mode perf report: Remove duplicate annotate choice in branch view mode perf/x86: Prettify pmu config literals perf report: Enable TUI in branch view mode perf report: Auto-detect branch stack sampling mode perf record: Add HEADER_BRANCH_STACK tag perf record: Provide default branch stack sampling mode option perf tools: Make perf able to read files from older ABIs perf tools: Fix ABI compatibility bug in print_event_desc() perf tools: Enable reading of perf.data files from different ABI rev perf: Add ABI reference sizes perf report: Add support for taken branch sampling perf record: Add support for sampling taken branch perf tools: Add code to support PERF_SAMPLE_BRANCH_STACK x86/kprobes: Split out optprobe related code to kprobes-opt.c x86/kprobes: Fix a bug which can modify kernel code permanently x86/kprobes: Fix instruction recovery on optimized path perf: Add callback to flush branch_stack on context switch perf: Disable PERF_SAMPLE_BRANCH_* when not supported perf/x86: Add LBR software filter support for Intel CPUs ...
2012-03-20Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes for v3.4 from Ingo Molnar. The major features of this series are: - making RCU more aggressive about entering dyntick-idle mode in order to improve energy efficiency - converting a few more call_rcu()s to kfree_rcu()s - applying a number of rcutree fixes and cleanups to rcutiny - removing CONFIG_SMP #ifdefs from treercu - allowing RCU CPU stall times to be set via sysfs - adding CPU-stall capability to rcutorture - adding more RCU-abuse diagnostics - updating documentation - fixing yet more issues located by the still-ongoing top-to-bottom inspection of RCU, this time with a special focus on the CPU-hotplug code path. * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) rcu: Stop spurious warnings from synchronize_sched_expedited rcu: Hold off RCU_FAST_NO_HZ after timer posted rcu: Eliminate softirq-mediated RCU_FAST_NO_HZ idle-entry loop rcu: Add RCU_NONIDLE() for idle-loop RCU read-side critical sections rcu: Allow nesting of rcu_idle_enter() and rcu_idle_exit() rcu: Remove redundant check for rcu_head misalignment PTR_ERR should be called before its argument is cleared. rcu: Convert WARN_ON_ONCE() in rcu_lock_acquire() to lockdep rcu: Trace only after NULL-pointer check rcu: Call out dangers of expedited RCU primitives rcu: Rework detection of use of RCU by offline CPUs lockdep: Add CPU-idle/offline warning to lockdep-RCU splat rcu: No interrupt disabling for rcu_prepare_for_idle() rcu: Move synchronize_sched_expedited() to rcutree.c rcu: Check for illegal use of RCU from offlined CPUs rcu: Update stall-warning documentation rcu: Add CPU-stall capability to rcutorture rcu: Make documentation give more realistic rcutorture duration rcutorture: Permit holding off CPU-hotplug operations during boot rcu: Print scheduling-clock information on RCU CPU stall-warning messages ...
2012-03-19Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core/iommu changes for v3.4 from Ingo Molnar * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/iommu/intel: Increase the number of iommus supported to MAX_IO_APICS x86/iommu/intel: Fix identity mapping for sandy bridge
2012-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking changes from David Miller: "1) icmp6_dst_alloc() returns NULL instead of ERR_PTR() leading to crashes, particularly during shutdown. Reported by Dave Jones and fixed by Eric Dumazet. 2) hyperv and wimax/i2400m return NETDEV_TX_BUSY when they have already freed the SKB, which causes crashes as to the caller this means requeue the packet. Fixes from Eric Dumazet. 3) usbnet driver doesn't allocate the right amount of headroom on fresh RX SKBs, fix from Eric Dumazet. 4) Fix regression in ip6_mc_find_dev_rcu(), as an RCU lookup it abolutely should not take a reference to 'dev', this leads to leaks. Fix from RonQing Li. 5) Fix netfilter ctnetlink race between delete and timeout expiration. From Pablo Neira Ayuso. 6) Revert SFQ change which causes regressions, specifically queueing to tail can lead to unavoidable flow starvation. From Eric Dumazet. 7) Fix a memory leak and a crash on corrupt firmware files in bnx2x, from Michal Schmidt." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: ctnetlink: fix race between delete and timeout expiration ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu. wimax/i2400m: fix erroneous NETDEV_TX_BUSY use net/hyperv: fix erroneous NETDEV_TX_BUSY use net/usbnet: reserve headroom on rx skbs bnx2x: fix memory leak in bnx2x_init_firmware() bnx2x: fix a crash on corrupt firmware file sch_sfq: revert dont put new flow at the end of flows ipv6: fix icmp6_dst_alloc()
2012-03-16staging/zmem: Use lockdep_assert_held instead of spin_is_lockedAndi Kleen
WARN_ON(!spin_is_locked()) will always trigger on UP. Use lockdep_assert_held instead. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16net: qmi_wwan: add support for ZTE MF820DBjørn Mork
ZTE have yet to discover the magic of USB descriptors. These devices use ff/ff/ff for class/subclass/protocol regardless of function, except for usb-storage. Use an interface number whitelist to force the driver to bind only to the QMI/wwan interface. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16Tools: hv: Support enumeration from all the poolsK. Y. Srinivasan
We have only supported enumeration only from the AUTO pool. Now support enumeration from all the available pools. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16Drivers: hv: Support the newly introduced KVP messages in the driverK. Y. Srinivasan
Support the newly defined KVP message types. It turns out that the host pushes a set of standard key value pairs as soon as the guest opens the KVP channel. Since we cannot handle these tuples until the user level daemon loads up, defer reading the KVP channel until the user level daemon is launched. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16USB: option: add ZTE MF820DBjørn Mork
This device presents a total of 5 interfaces with ff/ff/ff class/subclass/protocol. The last one of these is verified to be a QMI/wwan combined interface which should be handled by the qmi_wwan driver, so we blacklist it here. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16usb: gadget: f_fs: Remove lock is held before freeing checksAndi Kleen
lock debugging already supports this, no need to do it explicitely. Cc: balbi@ti.com Cc: gregkh@linuxfoundation.org Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16USB: option: make interface blacklist work againBjørn Mork
commit 0d905fd "USB: option: convert Huawei K3765, K4505, K4605 reservered interface to blacklist" accidentally ANDed two blacklist tests by leaving out a return. This was not noticed because the two consecutive bracketless if statements made it syntactically correct. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: <stable@vger.kernel.org> # 3.2.y, 3.3.y Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driverSebastian Andrzej Siewior
Deprecate this driver. All devices which can be handled by this driver can also be handled by the usb-storage driver. Acked-By: Pete Zaitcev <zaitcev@redhat.com> Cc: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16wimax/i2400m: fix erroneous NETDEV_TX_BUSY useEric Dumazet
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Also increments tx_dropped counter Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16net/hyperv: fix erroneous NETDEV_TX_BUSY useEric Dumazet
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. This is mostly a revert of commit bf769375c (staging: hv: fix the return status of netvsc_start_xmit()) In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16net/usbnet: reserve headroom on rx skbsEric Dumazet
network drivers should reserve some headroom on incoming skbs so that we dont need expensive reallocations, eg forwarding packets in tunnels. This NET_SKB_PAD padding is done in various helpers, like __netdev_alloc_skb_ip_align() in this patch, combining NET_SKB_PAD and NET_IP_ALIGN magic. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16bnx2x: fix memory leak in bnx2x_init_firmware()Michal Schmidt
When cycling the interface down and up, bnx2x_init_firmware() knows that the firmware is already loaded, but nevertheless it allocates certain arrays anew (init_data, init_ops, init_ops_offsets, iro_arr). The old arrays are leaked. Fix the leaks by returning early if the firmware was already loaded. Because if the firmware is loaded, so are the arrays. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16bnx2x: fix a crash on corrupt firmware fileMichal Schmidt
If the requested firmware is deemed corrupt and then released, reset the pointer to NULL in order to avoid double-freeing it in bnx2x_release_firmware() or dereferencing it in bnx2x_init_firmware(). Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-15Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge patches from Andrew Morton: "Nine patches - some bug fixes and some MAINTAINERS fiddling." * emailed from Andrew Morton <akpm@linux-foundation.org>: drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode MAINTAINERS: add entry for exynos mipi display drivers MAINTAINERS: fix link to Gustavo Padovans tree MAINTAINERS: add Johan to Bluetooth maintainers MAINTAINERS: Gustavo has moved prctl: use CAP_SYS_RESOURCE for PR_SET_MM option rapidio/tsi721: fix bug in register offset definitions MAINTAINERS: update ST's Mailing list for SPEAr memcg: free mem_cgroup by RCU to fix oops
2012-03-15Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull i2c subsystem fixes from Jean Delvare. * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-algo-bit: Fix spurious SCL timeouts under heavy load i2c-core: Comment says "transmitted" but means "received"
2012-03-15Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (zl6100) Enable interval between chip accesses for all chips hwmon: (w83627ehf) Describe undocumented pwm attributes hwmon: (w83627ehf) Fix temp2 source for W83627UHG hwmon: (w83627ehf) Fix memory leak in probe function hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776F
2012-03-15Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm exynos/intel updates from Dave Airlie: "Two minor updates from Jesse for Intel SNB fixes, and a few fixes from Samsung for exynos. The pull req has Alan's commit in it since Intel based their tree on my tree at that time, but it all seems fine wrt merging." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm exynos: use drm_fb_helper_set_par directly drm/exynos: Fix fb_videomode <-> drm_mode_modeinfo conversion drm/exynos: fix runtime_pm fimd device state on probe drm/exynos: use correct 'exynos-drm' name for platform device drm/i915: support 32 bit BGR formats in sprite planes drm/i915: fix color order for BGR formats on SNB drm/gma500: Fix Cedarview boot failures in 3.3-rc
2012-03-15Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "For 4 fixes for 3.3 (all trivial): - uvc video driver: fixes a division by zero; - davinci: add module.h to fix compilation; - smsusb: fix the delivery system setting; - smsdvb: the get_frontend implementation there is broken. The smsdvb patch has 127 lines, but it is trivial: instead of returning a cache of the set_frontend (with is wrong, as it doesn't have the updated values for the data, and the implementation there is buggy), it copies the information of the detected DVB parameters from the smsdvb private structures into the corresponding DVBv5 struct fields." * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] smsdvb: fix get_frontend [media] smsusb: fix the default delivery system setting [media] media: davinci: added module.h to resolve unresolved macros [media] [FOR,v3.3] uvcvideo: Avoid division by 0 in timestamp calculation
2012-03-15Merge branch '3.3-urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull target fixes from Nicholas Bellinger: "This series addresses two recently reported regression bugs related to legacy SCSI reservation usage in target core, and iscsi-target reservation conflict handling. The second patch in particular addresses possible data-corruption with SCSI reservations that is specific to iscsi-target fabric LUNs with multiple client writers. Both patches need to go into v3.2 stable ASAP, and the branch based on the last target-pending/3.3-rc-fixes HEAD. Again, thanks to Martin Svec for his help to identify and address this regression bug with iscsi-target." * '3.3-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Fix reservation conflict -EBUSY response handling bug target: Fix compatible reservation handling (CRH=1) with legacy RESERVE/RELEASE
2012-03-15drivers/video/backlight/s6e63m0.c: fix corruption storing gamma modeDan Carpenter
strict_strtoul() writes a long but ->gamma_mode only has space to store an int, so on 64 bit systems we end up scribbling over ->gamma_table_count as well. I've changed it to use kstrtouint() instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-15rapidio/tsi721: fix bug in register offset definitionsAlexandre Bounine
Fix indexed register offset definitions that use decimal (wrong) instead of hexadecimal (correct) notation for indexing multipliers. Incorrect definitions do not affect Tsi721 driver in its current default configuration because it uses only IDB queue 0. Loss of inbound doorbell functionality should be observed if queue other than 0 is used. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Chul Kim <chul.kim@idt.com> Cc: <stable@vger.kernel.org> [3.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-15Staging: rtl8187se: r8180_wx.c: Cleaned up commentsAndrew Miller
Realigned some comments and removed small bit of old comments that I missed in my last commit Signed-off-by: Andrew Miller <amiller@amilx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15Staging: rtl8187se: r8180_wx.c: Removed old commentsAndrew Miller
Removed old comments that were not needed. Signed-off-by: Andrew Miller <amiller@amilx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15Staging: rtl8187se: r8180_dm.c: Removed old commentsAndrew Miller
Removed some old comments Signed-off-by: Andrew Miller <amiller@amilx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15Staging: android: ram_console.c:Greg Kroah-Hartman
Fix build error when CONFIG_PRINTK is not selected. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15Staging: rtl8187se: r8180_dm.c: Fix commentsAndrew Miller
Change c++ style comments to c style Signed-off-by: Andrew Miller <amiller@amilx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15Staging: rtl8187se: r8180_dm.c: Fix spacing issuesAndrew Miller
Fix spacing around keywords, '*', binary and ternary operators, and fix the format of statments and function declaration. Signed-off-by: Andrew Miller <amiller@amilx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15Staging: rtl8187se: r8180_dm.c Fixed indentation issuesAndrew Miller
Fixed indentation issues and converted spaces, that were being use for indentation, to tabs Signed-off-by: Andrew Miller <amiller@amilx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15Staging: rtl8187se: r8180_dm.c: Fix bracketsAndrew Miller
Fix brackets that where out of place and removed brackets that were not needed Signed-off-by: Andrew Miller <amiller@amilx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15Staging: rtl8187se: r8180_dm.c: Removed spaces before tab stopAndrew Miller
Clean up spaces before tab stops and some trailing space to. Signed-off-by: Andrew Miller <amiller@amilx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15staging: vme: fix section mismatches in linux-next 20120314Gerard Snitselaar
pio2_gpio_init() annotated with __init, but called by pio2_probe() which is annotated __devinit. pio2_gpio_exit() is annotated __exit, but is called by pio2_probe() and by pio2_remove() which is annotated __devexit. Signed-off-by: Gerard Snitselaar <dev@snitselaar.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15USB: ohci-pxa27x: add clk_prepare/clk_unprepare callsPhilipp Zabel
This patch adds clk_prepare/clk_unprepare calls to the ohci-pxa27x driver by using the helper functions clk_prepare_enable and clk_disable_unprepare. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15serial: pxa: add clk_prepare/clk_unprepare callsPhilipp Zabel
This patch adds clk_prepare/clk_unprepare calls to the serial/pxa driver by using the helper functions clk_prepare_enable and clk_disable_unprepare. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15TTY: Wrong unicode value copied in con_set_unimap()Liz Clark
Bugzilla 40012: PIO_UNIMAP bug: error updating Unicode-to-font map https://bugzilla.kernel.org/show_bug.cgi?id=40012 The unicode font map for the virtual console is a 32x32x64 table which allocates rows dynamically as entries are added. The unicode value increases sequentially and should count all entries even in empty rows. The defect is when copying the unicode font map in con_set_unimap(), the unicode value is not incremented properly. The wrong unicode value is entered in the new font map. Signed-off-by: Liz Clark <liz.clark@hp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15USB: use generic platform driver on ath79Hauke Mehrtens
The ath79 usb driver doesn't do anything special and is now converted to the generic ehci and ohci driver. This was tested on a TP-Link TL-WR1043ND (AR9132) Acked-by: Gabor Juhos <juhosg@openwrt.org> CC: Imre Kaloz <kaloz@openwrt.org> CC: linux-mips@linux-mips.org CC: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15USB: EHCI: Add a generic platform device driverHauke Mehrtens
This adds a generic driver for platform devices. It works like the PCI driver and is based on it. This is for devices which do not have an own bus but their EHCI controller works like a PCI controller. It will be used for the Broadcom bcma and ssb USB EHCI controller. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15USB: OHCI: Add a generic platform device driverHauke Mehrtens
This adds a generic driver for platform devices. It works like the PCI driver and is based on it. This is for devices which do not have an own bus but their OHCI controller works like a PCI controller. It will be used for the Broadcom bcma and ssb USB OHCI controller. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15USB: ftdi_sio: new PID: LUMEL PD12Michał Wróbel
Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15i2c-algo-bit: Fix spurious SCL timeouts under heavy loadVille Syrjala
When the system is under heavy load, there can be a significant delay between the getscl() and time_after() calls inside sclhi(). That delay may cause the time_after() check to trigger after SCL has gone high, causing sclhi() to return -ETIMEDOUT. To fix the problem, double check that SCL is still low after the timeout has been reached, before deciding to return -ETIMEDOUT. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-15i2c-core: Comment says "transmitted" but means "received"Wolfram Sang
Fix that. Also convert this and the related comment to proper commenting style. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>