| Age | Commit message (Collapse) | Author |
|---|
|
The thermal zone type should not include an instance number. Otherwise
each zone is considered a different type and the thermal-to-hwmon
bridge fails to group them all in a single hwmon device.
I also changed the type to "x86_pkg_temp", because "pkg" was too
generic, and other thermal drivers use an underscore, not a dash, as
a separator. Or maybe "cpu_pkg_temp" would be better?
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The temperature value reported by x86_pkg_temp_thermal is already
reported by the coretemp driver. So, do not expose this thermal zone
as a hwmon device, because it would be redundant.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <eduardo.valentin@ti.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Merge misc fixes from Andrew Morton.
* emailed patches from Andrew Morton akpm@linux-foundation.org>:
MAINTAINERS: change mailing list address for Altera UART drivers
Makefile: fix build with make 3.80 again
MAINTAINERS: update L: misuses
Makefile: fix extra parenthesis typo when CC_STACKPROTECTOR_REGULAR is enabled
ipc,mqueue: remove limits for the amount of system-wide queues
memcg: change oom_info_lock to mutex
mm, thp: fix infinite loop on memcg OOM
drivers/fmc/fmc-write-eeprom.c: fix decimal permissions
drivers/iommu/omap-iommu-debug.c: fix decimal permissions
mm, hwpoison: release page on PageHWPoison() in __do_fault()
|
|
This 444 should have been octal.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These should have been octal.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine
Pull dmaengine fixes from Dan Williams:
"Fix tasklet lifetime management in the ioat driver causing ksoftirqd
to spin indefinitely.
References:
https://lkml.org/lkml/2014/1/27/282
https://lkml.org/lkml/2014/2/19/672"
* tag 'dmaengine-fixes-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
ioat: fix tasklet tear down
|
|
Pull MTD fixes from Brian Norris:
"Two main MTD fixes:
1. Read retry counting was off by one, so if we had a true ECC error
(i.e., no retry voltage threshold would give a clean read), we
would end up returning -EINVAL on the Nth mode instead of -EBADMSG
after then (N-1)th mode
2. The OMAP NAND driver had some of its ECC layouts wrong when
introduced in 3.13, causing incompatibilities between the
bootloader on-flash layout and the layout expected in Linux. The
expected layouts are now documented in the commit messages, and we
plan to add this under Documentation/mtd/nand/ eventually"
* tag 'for-linus-20140225' of git://git.infradead.org/linux-mtd:
mtd: nand: omap: fix ecclayout->oobfree->length
mtd: nand: omap: fix ecclayout->oobfree->offset
mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver
mtd: nand: fix off-by-one read retry mode counting
|
|
Since commit 77873803363c "net_dma: mark broken" we no longer pin dma
engines active for the network-receive-offload use case. As a result
the ->free_chan_resources() that occurs after the driver self test no
longer has a NET_DMA induced ->alloc_chan_resources() to back it up. A
late firing irq can lead to ksoftirqd spinning indefinitely due to the
tasklet_disable() performed by ->free_chan_resources(). Only
->alloc_chan_resources() can clear this condition in affected kernels.
This problem has been present since commit 3e037454bcfa "I/OAT: Add
support for MSI and MSI-X" in 2.6.24, but is now exposed. Given the
NET_DMA use case is deprecated we can revisit moving the driver to use
threaded irqs. For now, just tear down the irq and tasklet properly by:
1/ Disable the irq from triggering the tasklet
2/ Disable the irq from re-arming
3/ Flush inflight interrupts
4/ Flush the timer
5/ Flush inflight tasklets
References:
https://lkml.org/lkml/2014/1/27/282
https://lkml.org/lkml/2014/2/19/672
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Reported-by: Mike Galbraith <bitbucket@online.de>
Reported-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Tested-by: Mike Galbraith <bitbucket@online.de>
Tested-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 bug fixes from Martin Schwidefsky:
"A couple of s390 bug fixes. The PCI segment boundary issue is a nasty
one as it can lead to data corruption"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: Fix missing subchannels after CHPID configure on
s390/pci/dma: use correct segment boundary size
s390/compat: fix sys_sched_getattr compat wrapper
s390/zcrypt: additional check to avoid overflow in msg-type 6 requests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Mostly unexciting driver fixes, plus one fix to lower the severity of
the log message when we don't use an optional regulator - the fixes
for ACPI system made this come up more often and it was correctly
observed that it was causing undue concern for users"
* tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max14577: Fix invalid return value on DT parse success
regulator: core: Change dummy supplies error message to a warning
regulator: s5m8767: Add missing of_node_put
regulator: s5m8767: Use of_get_child_by_name
regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
|
|
This patch excludes reserved-marker byte-position from oobfree->length
calculation. Thus all bytes from oobfree->offset till end of OOB are free.
CC: <stable@vger.kernel.org> # 3.13.x+
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
1) In current implementation, ecclayout->oobfree->offset is calculated with
respect to ecclayout->eccpos[0] which is incorrect because ECC bytes may not
be stored contiguously in OOB.
So, this patch calculates ecclayout->oobfree->offset with respect to last
ECC byte-position 'eccpos[ecclayout->eccbytes-1]'.
2) ECC layout of some ecc-schemes expects reserved-markers at specific eccpos[]
which should not be over-written by any file-system metadata.
So this patch aligns oobfree->offset taking into account of such markers.
CC: <stable@vger.kernel.org> # 3.13.x+
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Fixes: commit a919e51161b58ed7e6e663daba99ab7d558808f3
mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
Fixes ecclayout mismatch introduced in above commit for following ecc-schemes:
- OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
However, this patch also touches other ecc-schemes as the fix required
refactoring common code, into ecc-scheme specific code.
This patch aligns ecc-layout for below ecc-schemes as per reference [1],[2],[3]
+---+------------+-------------++-------------+-------------+
|OOB|BCH8_CODE_HW|BCH8_CODE_HW_||HAM1_CODE_HW |HAM1_CODE_HW |
|pos| | DETECTION_SW||(x8 device) |(x16 device) |
+---+------------+-------------++-------------+-------------+
| 0 |BADBLK_MARK | BADBLK_MARK || BADBLK_MARK | BADBLK_MARK |
| 1 |BADBLK_MARK | BADBLK_MARK || eccpos[0] | BADBLK_MARK |
| 2 | eccpos[0] | eccpos[0] || eccpos[1] | eccpos[0] |
| 3 | eccpos[1] | eccpos[1] || eccpos[2] | eccpos[1] |
| 4 | eccpos[2] | eccpos[2] || eccpos[3] | eccpos[2] |
| 5 | eccpos[3] | eccpos[3] || eccpos[4] | eccpos[3] |
| 6 | eccpos[4] | eccpos[4] || eccpos[5] | eccpos[4] |
| 7 | eccpos[5] | eccpos[5] || eccpos[6] | eccpos[5] |
| 8 | eccpos[6] | eccpos[6] || eccpos[7] | eccpos[6] |
| 9 | eccpos[7] | eccpos[7] || eccpos[8] | eccpos[7] |
|10 | eccpos[8] | eccpos[8] || eccpos[9] | eccpos[8] |
|11 | eccpos[9] | eccpos[9] || eccpos[10] | eccpos[9] |
|12 | eccpos[10] | eccpos[10] || eccpos[11] | eccpos[10] |
|13 | eccpos[11] | eccpos[11] || oobfree[0] | eccpos[11] |
|14 | eccpos[12] | eccpos[12] || oobfree[1] | oobfree[0] |
|15 | eccpos[13] | <reserved> || oobfree[2] | oobfree[1] |
+---+------------+-------------++-------------+-------------+
|16 | eccpos[14] | eccpos[13] || oobfree[3] | oobfree[2] |
|...| [...] | [...] || [...] | [...] |
|56 | eccpos[54] | eccpos[51] || oobfree[43] | oobfree[42] |
|57 | eccpos[55] | <reserved> || oobfree[44] | oobfree[43] |
+===+============+=============+==============+=============+
|58 | oobfree[0] | oobfree[0] || oobfree[45] | oobfree[44] |
|59 | oobfree[1] | oobfree[1] || oobfree[46] | oobfree[45] |
|60 | oobfree[2] | oobfree[2] || oobfree[47] | oobfree[46] |
|61 | oobfree[3] | oobfree[3] || oobfree[48] | oobfree[47] |
|62 | oobfree[4] | oobfree[4] || oobfree[49] | oobfree[48] |
|63 | oobfree[5] | oobfree[5] || oobfree[50] | oobfree[49] |
+---+------------+-------------+--------------+-------------+
[1] ecc-layout expected by ROM code, as specified in SoC TRM under:
Chapter="Initialization"
Section="Device Initialization by ROM code"
Sub-Section="Memory Booting"
Heading="NAND"
Figure="ECC Locations in NAND Spare Areas"
[2] ecc-layout updates in u-boot
http://lists.denx.de/pipermail/u-boot/2013-November/167551.html
[3] u-boot configurations to match above ecc-layout are documented at
https://processors.wiki.ti.com/index.php/Linux_Core_NAND_User%27s_Guide
CC: <stable@vger.kernel.org> # 3.13.x+
Reported-by: Enric Balletbo Serra <eballetbo@iseebcn.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Another four fixlets to tame the ARM orion irq chip"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: orion: Fix getting generic chip pointer.
irqchip: orion: clear stale interrupts in irq_startup
irqchip: orion: use handle_edge_irq on bridge irqs
irqchip: orion: clear bridge cause register on init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for reported issues for 3.14-rc4
The majority of these are for USB gadget, phy, and musb driver issues.
And there's a few new device ids thrown in for good measure"
* tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: need to mask when writting endptflush and endptprime
usb: musb: correct use of schedule_delayed_work()
usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
usb: gadget: fix NULL pointer dereference
usb: gadget: printer: using gadget_is_otg to check otg support at runtime
phy: let phy_provider_register be the last step in registering PHY
phy-core: Don't allow building phy-core as a module
phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller
phy-core: phy_get: Leave error logging to the caller
phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM
usb: musb: correct use of schedule_delayed_work()
usb: musb: do not sleep in atomic context
USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8
USB: EHCI: add delay during suspend to prevent erroneous wakeups
usb: gadget: bcm63xx_udc: fix build failure on DMA channel code
usb: musb: do not sleep in atomic context
usb: gadget: s3c2410_udc: Fix build error
usb: musb: core: Fix remote-wakeup resume
usb: musb: host: Fix SuperSpeed hub enumeration
usb: musb: fix obex in g_nokia.ko causing kernel panic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY revert from Greg KH:
"Here is a single commit, a revert of a sysfs file change that ended up
breaking a userspace tool"
* tag 'tty-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: Set correct tty name in 'active' sysfs attribute"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fix from Greg KH:
"Here is a single android driver fix for 3.14-rc4 that fixes a reported
problem in the binder driver"
* tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: binder: Fix death notifications
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single commit, to fix a reported problem in the mei driver"
* tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: set client's read_cb to NULL when flow control fails
|
|
'regulator/fix/max14577' and 'regulator/fix/s5m8767' into regulator-linus
|
|
|
|
This reverts commit d8a5dc3033af2fd6d16030d2ee4fbd073460fe54.
This breaks plymouth installs, either because plymouth is using the file
"incorrectly" or because the patch is incorrect. Either way, this needs
to be reverted until it is all figured out.
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Reported-by: Ray Strode <halfline@gmail.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Werner Fink <werner@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix writing the minimum temperature in max1668 driver"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Fix writing the minimum temperature
|
|
This fixes bug introduced in 667a6b7a (regulator: max14577: Add missing
of_node_put). The DTS parsing function returned number of matched
regulators as success status which then was compared against 0 in probe.
Result was a probe fail after successful parsing the DTS:
max14577-regulator: probe of max14577-regulator failed with error 2
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviwed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
into irq/urgent
irqchip mvebu fixes for v3.14
- orion:
- fixes for clearing bridge cause register, and clearing stale interrupts
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Pull devicetree fixes from Grant Likely:
"Device tree compatible match order bug fix
This branch contains a bug fix for the way devicetree code identifies
the type of device. Device drivers can contain a list of
of_device_ids, but it more than one entry will match, then the device
driver may choose the wrong one. Commit 105353145e, "match each node
compatible against all given matches first", was queued for v3.14 but
ended up causing other bugs. Commit 06b29e76a7 attempted to fix it
but it had other bugs. Merely reverting the fix and waiting until
v3.15 isn't a good option because there is code in v3.14 that depends
on the revised behaviour to boot.
This branch should finally fixes the problem correctly. This time
instead of just hoping that the patch is correct, this branch also
adds new testcases that validate the behaviour.
The changes in this branch are larger than I would like for a -rc
pull, but moving the test case data out of out of arch/arm so that it
could be validated on other architectures was important"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
of: Add self test for of_match_node()
of: Move testcase FDT data into drivers/of
of: reimplement the matching method for __of_match_node()
Revert "of: search the best compatible match first in __of_match_node()"
|
|
Pull watchdog fix from Wim Van Sebroeck:
"It corrects the error code when no device was found for w83697hf_wdt"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: w83697hf_wdt: return ENODEV if no device was found
|
|
Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt
handler. The bridge interrupt is implemented using a single generic
chip. Thus the parameter passed to irq_get_domain_generic_chip()
should always be zero.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Fixes: 9dbd90f17e4f ("irqchip: Add support for Marvell Orion SoCs")
Cc: <stable@vger.kernel.org> # v3.11+
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.
Cc: stable <stable@vger.kernel.org> # 3.11+
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The change (008fa749e0fe5b2fffd20b7fe4891bb80d072c6a) that moved the
node release code to a separate function broke death notifications in
some cases. When it encountered a reference without a death
notification request, it would skip looking at the remaining
references, and therefore fail to send death notifications for them.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: stable <stable@vger.kernel.org> # 3.10
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Most WDT driver modules return ENODEV during modprobe if
no valid device was found, but w83697hf_wdt returns EIO.
Let w83697hf_wdt return ENODEV.
Signed-off-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Pull sparc fixes from David Miller:
"Three minor fixes from David Howells and Paul Gortmaker"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
Sparc: sparc_cpu_model isn't in asm/system.h any more [ver #2]
sparc32: make copy_to/from_user_page() usable from modular code
sparc32: fix build failure for arch_jump_label_transform
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These include two fixes for recent regressions related to ACPI, a
cpufreq fix for breakage overlooked by a previous fix commit, two
intel_pstate fixes for stuff added during the 3.13 cycle that need to
go into -stable, three fixes for older bugs that also are -stable
candidates, ACPI video blacklist changes related to BIOSes that behave
in a special way on Windows 8, several build fixes for CONFIG_PM_SLEEP
unset in ACPI drivers and an ACPI driver cleanup.
Specifics:
- Fix for a recent probing regression in the nouveau driver
introduced by an ACPI change related to the handling of _DSM from
Jiang Liu.
- Fix for a dock station sysfs attribute that stopped working
correctly after recent changes in the ACPI core.
- cpufreq fix taking care of broken code related to CPU removal and
overlooked by a previous recent fix in that area. From Viresh
Kumar.
- Two intel_pstate fixes related to Baytrail support added during the
3.13 cycle (candidates for -stable) from Dirk Brandewie.
- ACPI video fix removing duplicate brightness values from the _BCL
table which makes its user space interface behave sanely. From
Hans de Goede.
- Fix for the powernow-k8 cpufreq driver making it initialize its
per-CPU data structures correctly from Srivatsa S Bhat.
- Fix for an obscure memory leak in the ACPI PCI interrupt allocation
code (related to ISA) from Tomasz Nowicki.
- ACPI video blacklist changes moving several systems that should use
the native backlight interface instead of the ACPI one from the
general ACPI _OSI blacklist the the ACPI video driver's blacklist
where they belong. This consists of an ACPI video driver update
from Aaron Lu and a revert of a previous commit adding systems to
the ACPI _OSI blacklist requested by Takashi Iwai.
- Several fixes for build issues in ACPI drivers occuring when
CONFIG_PM_SLEEP is unset from Shuah Khan.
- Fix for an sscanf() format string in the ACPI Smart Battery
Subsystem (SBS) driver from Luis G.F"
* tag 'pm+acpi-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_pstate: Add support for Baytrail turbo P states
intel_pstate: Use LFM bus ratio as min ratio/P state
ACPI / nouveau: fix probing regression related to _DSM
Revert "ACPI: Blacklist Win8 OSI for some HP laptop 2013 models"
ACPI / video: Add systems that should favour native backlight interface
ACPI / video: Filter the _BCL table for duplicate brightness values
cpufreq: powernow-k8: Initialize per-cpu data-structures properly
cpufreq: remove sysfs link when a cpu != policy->cpu, is removed
ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()
ACPI / dock: Make 'docked' sysfs attribute work as documented
ACPI / SBS: Fix incorrect sscanf() string
ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / SBS: fix SBS driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / AC: fix AC driver compile error when CONFIG_PM_SLEEP is undefined
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"The fixes are only for the ARM-SMMU driver. Here is the summary from
Will Deacon:
- Andreas Herrmann took the driver for a run with a real SATA
controller, which caused the new mutex-based locking to explode
since we require mappings in atomic context
- Yifan fixed an issue with the page table creation, which then
caused breakages with the way in which we flush descriptors out to
the table walker
- I ran the driver on a system where the SMMU is hooked into a
coherent interconnect for table walks, and noticed a shareability
mismatch between the CPU and the SMMU
These issues are all fixed here and have been tested on both arm and
arm64 based systems.
Besides that I put a fix on-top to make the spinlock irq-safe, so that
the code-paths can be used in the DMA-API"
* tag 'iommu-fixes-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
arm/smmu: Use irqsafe spinlock for domain lock
iommu/arm-smmu: fix compilation issue when !CONFIG_ARM_AMBA
iommu/arm-smmu: set CBARn.BPSHCFG to NSH for s1-s2-bypass contexts
iommu/arm-smmu: fix table flushing during initial allocations
iommu/arm-smmu: really fix page table locking
iommu/arm-smmu: fix pud/pmd entry fill sequence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This time we got a slightly higher volume than previous times, but all
device-specific good fixes. Noticeable changes are fixes in davinci,
and the removal of open-codes in HD-audio ca0132 driver. The rest are
all small fixes and/or quirks"
* tag 'sound-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Enable front audio jacks on one HP desktop model
ALSA: hda/ca0132 - Fix recording from mode id 0x8
ALSA: hda/ca0132 - setup/cleanup streams
ALSA: hda - add headset mic detect quirks for two Dell laptops
ALSA: usb-audio: work around KEF X300A firmware bug
ASoC: max98090: make REVISION_ID readable
ASoC: txx9aclc_ac97: Fix kernel crash on probe
ASoC: max98090: sync regcache on entering STANDBY
ASoC: blackfin: Fix machine driver Kconfig dependencies
ASoC: da9055: Fix device registration of PMIC and CODEC devices
ASoC: fsl-esai: fix ESAI TDM slot setting
ASoC: fsl: fix pm support of machine drivers
ASoC: rt5640: Add ACPI ID for Intel Baytrail
ASoC: davinci-evm: Add pm callbacks to platform driver
ASoC: davinci-mcasp: Consolidate pm_runtime_get/put() use in the driver
ASoC: davinci-mcasp: Configure xxTDM, xxFMT and xxFMCT registers synchronously
ASoC: davinci-mcasp: Harmonize the sub hw_params function names
ASoC: samsung: Fix trivial typo
ASoC: samsung: Remove invalid dependencies
ASoC: wm8993: drop regulator_bulk_free of devm_ allocated data
|
|
Performing a Channel-Path configure on operation on a Channel-Path ID
(CHPID) does not trigger a scan for subchannels that might have become
available through that CHPID. As a result, some subchannels and
associated I/O devices might be missing. Fix this by adding the missing
scan.
This problem was introduced by commit c820de39, "[S390] cio: Rework
css driver.", but wasn't noticed earlier because the machine usually
also generates a Channel-Report-Word when the first CHPID of a
subchannel is configured on, resulting in a separate scan for that
subchannel. The problem only becomes apparent when this first CHPID is
not working properly and additional working CHPIDs are subsequently
configured on without any effect on the availability of the affected
subchannel.
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
* pm-cpufreq:
intel_pstate: Add support for Baytrail turbo P states
intel_pstate: Use LFM bus ratio as min ratio/P state
cpufreq: powernow-k8: Initialize per-cpu data-structures properly
cpufreq: remove sysfs link when a cpu != policy->cpu, is removed
|
|
* acpi-pm:
ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / SBS: fix SBS driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / AC: fix AC driver compile error when CONFIG_PM_SLEEP is undefined
* acpi-video:
Revert "ACPI: Blacklist Win8 OSI for some HP laptop 2013 models"
ACPI / video: Add systems that should favour native backlight interface
ACPI / video: Filter the _BCL table for duplicate brightness values
|
|
* acpi-cleanup:
ACPI / SBS: Fix incorrect sscanf() string
* acpi-dock:
ACPI / dock: Make 'docked' sysfs attribute work as documented
* acpi-pci:
ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()
* acpi-dsm:
ACPI / nouveau: fix probing regression related to _DSM
|
|
A documentation update exposed the existance of the turbo ratio
register. Update baytrail support to use the turbo range.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
LFM (max efficiency ratio) is the max frequency at minimum voltage
supported by the processor. Using LFM as the minimum P state
increases performmance without affecting power. By not using P states
below LFM we avoid using P states that are less power efficient.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Change "dummy supplies not allowed" error message to warning instead, as this
is a just warning message with no change to the behavior.
[Added a CC to stable since some other bug fixes cause this to come up
more frequently on PCs which is how it was noticed -- broonie]
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v3.14-rc4
Here are 10 fixes for our current -rc cycle. It's likely
the last round of fixes for this merge window. All patches
have soaked for a long time and have all been tested in real
HW.
The most interesting fixes are a fix for enumeration of superspeed
hubs when MUSB is acting as host, and a remote-wakeup fix also on
MUSB.
Signed-of-by: Felipe Balbi <balbi@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"The most interesting thing here is the change to enable INTx (by
clearing PCI_COMMAND_INTX_DISABLE) if the BIOS left INTx disabled.
Apparently the Baytrail BIOS does this, which means EHCI doesn't work.
Also, fix an AHCI MSI regression and other issues with the recent MSI
changes. This also adds pci_enable_msi_exact() and
pci_enable_msix_exact(), which aren't regression fixes, but will keep
us from touching drivers twice (once to stop using the deprecated
pci_enable_msi(), etc., and again to use the *_exact() variants).
There's also a minor MVEBU fix.
Summary:
MSI:
- Fix AHCI single-MSI fallback (Alexander Gordeev)
- Fix populate_msi_sysfs() error paths (Greg Kroah-Hartman)
- Fix htmldocs problem (Masanari Iida)
- Add pci_enable_msi_exact() and pci_enable_msix_exact() (Alexander Gordeev)
- Update documentation (Alexander Gordeev)
Miscellaneous:
- mvebu: expose device ID & revision via lspci (Andrew Lunn)
- Enable INTx if the BIOS left them disabled (Bjorn Helgaas)"
* tag 'pci-v3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
ahci: Fix broken fallback to single MSI mode
PCI: Enable INTx if BIOS left them disabled
PCI/MSI: Add pci_enable_msi_exact() and pci_enable_msix_exact()
PCI/MSI: Fix cut-and-paste errors in documentation
PCI/MSI: Add pci_enable_msi() documentation back
PCI/MSI: Fix pci_msix_vec_count() htmldocs failure
PCI/MSI: Fix leak of msi_attrs
PCI/MSI: Check kmalloc() return value, fix leak of name
PCI: mvebu: Use Device ID and revision from underlying endpoint
|
|
Fix regression caused by commit b072e53, which breaks loading nouveau
driver on optimus laptops.
On some platforms, ACPI _DSM method (nouveau_op_dsm_muid, function 0)
has special requirements on the fourth parameter, which is different
from ACPI specifications. So revert to the private implementation
to check availability of _DSM functions instead of using common
acpi_check_dsm() interface.
Fixes: b072e53b0a27 (ACPI / nouveau: replace open-coded _DSM code with helper functions)
Reported-and-tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
[rjw: Subject]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Various device specific fixes. Nothing too interesting"
* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: disable NCQ on Samsung pci-e SSDs on macbooks
ata: sata_mv: Cleanup only the initialized ports
sata_sil: apply MOD15WRITE quirk to TOSHIBA MK2561GSYN
ata: enable quirk from jmicron JMB350 for JMB394
ATA: SATA_MV: Add missing Kconfig select statememnt
ata: pata_imx: Check the return value from clk_prepare_enable()
|
|
sparc_cpu_model isn't in asm/system.h any more, so remove a comment
about it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
schedule_delayed_work() takes the delay in jiffies, not msecs.
This bug slipped in with the recent reset logic cleanup
(8ed1fb790ea: "usb: musb: finish suspend/reset work independently from
musb_hub_control()").
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
Both the PM_RUNTIME and PM_SLEEP callbacks call into the common
msm_otg_{suspend,resume} routines, however these routines are only being
built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also
depends on msm_hsusb_config_vddcx(), which is only built when
CONFIG_PM_SLEEP.
Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the
preprocessor conditional, and moving msm_hsusb_config_vddcx().
While we're here, eliminate the CONFIG_PM conditional for setting
up the dev_pm_ops.
This address the following errors Russell King has hit doing randconfig
builds:
drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend':
drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend'
drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume':
drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume'
Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
Fix possible NULL pointer dereference introduced in
commit 219580e (usb: f_fs: check quirk to pad epout
buf size when not aligned to maxpacketsize)
In cases we do wait with:
wait_event_interruptible(epfile->wait, (ep = epfile->ep));
for endpoint to be enabled, functionfs_bind() has not been called yet
and epfile->ffs->gadget is still NULL and the automatic variable 'gadget'
has been initialized with NULL at the point of its definition.
Later on it is used as a parameter to:
usb_ep_align_maybe(gadget, ep->ep, len)
which in turn dereferences it.
This patch fixes it by moving the actual assignment to the local 'gadget'
variable after the potential waiting has completed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
