summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2009-06-24Remove low_latency flag setting from nozomi and mxser driversChuck Ebbert
The kernel oopses if this flag is set. [and neither driver should set it as they call tty_flip_buffer_push from IRQ paths so have always been buggy] Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24tty: fix tty_port_block_til_ready waitingJiri Slaby
Since commit 3e3b5c087799e536871c8261b05bc28e4783c8da ("tty: use prepare/finish_wait"), tty_port_block_til_ready() is using prepare_to_wait()/finish_wait(). Those functions require that the wait_queue_t be initialised with .func=autoremove_wake_function, via DEFINE_WAIT(). But the conversion from DECLARE_WAITQUEUE() to DEFINE_WAIT() was not made, so this code will oops in finish_wait(). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24pci: use pci_ioremap_bar() in drivers/serialArjan van de Ven
Use the newly introduced pci_ioremap_bar() function in drivers/serial. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24synclink_gt: fix transmit race and timeoutPaul Fulghum
Fix race condition when adding transmit data to active DMA buffer ring that can cause transmit stall. Update transmit timeout when adding data to active DMA buffer ring. Base transmit timeout on amount of buffered data instead of using fixed value. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24jsm: clean up "serial: jsm: correctly support 4 8 port boards"Andrew Morton
Remove unneeded casts. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24kgdb: kgdboc console poll hooks for serial_txx9 uartAtsushi Nemoto
Implement the serial polling hooks for the serial_txx9 uart for use with kgdboc. This patch once got SOB from Jason on Jul 2008 and (perhaps) merged into kgdb-next branch, but lost somewhere then. I resend it now with Jason's Acked-by. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: Intel-IOMMU, intr-remap: source-id checking Intel-IOMMU, intr-remap: set the whole 128bits of irte when modify/free it IOMMU Identity Mapping Support (drivers/pci/intel_iommu.c)
2009-06-23Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: driver for the Synopsys DesignWare I2C controller
2009-06-24i2c: driver for the Synopsys DesignWare I2C controllerBaruch Siach
The i2c Linux driver for the DesignWare i2c block of Synopsys, which is meant for AMBA Peripheral Bus. This i2c block is used on SoC chips like the ARM9 based PVG610. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-23Intel-IOMMU, intr-remap: source-id checkingWeidong Han
To support domain-isolation usages, the platform hardware must be capable of uniquely identifying the requestor (source-id) for each interrupt message. Without source-id checking for interrupt remapping , a rouge guest/VM with assigned devices can launch interrupt attacks to bring down anothe guest/VM or the VMM itself. This patch adds source-id checking for interrupt remapping, and then really isolates interrupts for guests/VMs with assigned devices. Because PCI subsystem is not initialized yet when set up IOAPIC entries, use read_pci_config_byte to access PCI config space directly. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-23Intel-IOMMU, intr-remap: set the whole 128bits of irte when modify/free itWeidong Han
Interrupt remapping table entry is 128bits. Currently, it only sets low 64bits of irte in modify_irte and free_irte. This ignores high 64bits setting of irte, that means source-id setting will be ignored. This patch sets the whole 128bits of irte when modify/free it. Following source-id checking patch depends on this. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-23IOMMU Identity Mapping Support (drivers/pci/intel_iommu.c)Fenghua Yu
Identity mapping for IOMMU defines a single domain to 1:1 map all PCI devices to all usable memory. This reduces map/unmap overhead in DMA API's and improve IOMMU performance. On 10Gb network cards, Netperf shows no performance degradation compared to non-IOMMU performance. This method may lose some of DMA remapping benefits like isolation. The patch sets up identity mapping for all PCI devices to all usable memory. In the DMA API, there is no overhead to maintain page tables, invalidate iotlb, flush cache etc. 32 bit DMA devices don't use identity mapping domain, in order to access memory beyond 4GiB. When kernel option iommu=pt, pass through is first tried. If pass through succeeds, IOMMU goes to pass through. If pass through is not supported in hw or fail for whatever reason, IOMMU goes to identity mapping. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-23nvidiafb: fix boot-time printk stringMikael Pettersson
On bootup nvidiafb prints the following on my Apple G5: nvidiafb: CRTC 1appears to have a CRT attached There should be a space between the '1' and the 'appears'. Add it. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Add __init/__exit macros to addr.c and cma.c IB/ehca: Bump version number mlx4_core: Fix dma_sync_single_for_cpu() with matching for_device() calls IB/mthca: Replace dma_sync_single() use with proper functions RDMA/nes: Fix FIN state handling under error conditions RDMA/nes: Fix max_qp_init_rd_atom returned from query device IB/ehca: Ensure that guid_entry index is not negative IB/ehca: Tolerate dynamic memory operations before driver load
2009-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (38 commits) fusion: mptsas, fix lock imbalance [SCSI] scsi_transport_fc: replace BUS_ID_SIZE by fixed count sd, sr: fix Driver 'sd' needs updating message scsi_transport_iscsi: return -EOVERFLOW for Too many iscsi targets fc_transport: Selective return value from BSG timeout function fc_transport: The softirq_done function registration for BSG request sym53c8xx: ratelimit parity errors explain the hidden scsi_wait_scan Kconfig variable ibmvfc: Fix endless PRLI loop in discovery ibmvfc: Process async events before command responses libfc: Add runtime debugging with debug_logging module parameter libfcoe: Add runtime debugging with module param debug_logging fcoe: Add runtime debug logging with module parameter debug_logging scsi_debug: Add support for physical block exponent and alignment cnic: add NETDEV_1000 and NETDEVICES to Kconfig select cnic: Fix __symbol_get() build error. Revert "[SCSI] cnic: fix error: implicit declaration of function ‘__symbol_get’" ipr: differentiate pci-x and pci-e based adapters ipr: add test for MSI interrupt support scsi_transport_spi: Blacklist Ultrium-3 tape for IU transfers ...
2009-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] wdt_pci.c: remove #ifdef CONFIG_WDT_501_PCI [WATCHDOG] hpwdt: Add NMI priority option [WATCHDOG] OMAP fixes: enable clock in probe, trigger timer reload [WATCHDOG] add bcm47xx watchdog driver [WATCHDOG] Freescale STMP: watchdog driver [WATCHDOG] twl4030 watchdog driver [WATCHDOG] U300 COH 901 327 watchdog driver [WATCHDOG] Add pnx833x_wdt
2009-06-23Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (62 commits) V4L/DVB (12131): BUGFIX: An incorrect Carrier Recovery Loop optimization table was being V4L/DVB (12130): Fix a redundant compiler warning V4L/DVB (12003): v4l2: Move bounding code outside I2C ifdef block V4L/DVB (11913): cx231xx: TRY_FMT should not actually set anything V4L/DVB (11912): em28xx: Use v4l bounding/alignment function V4L/DVB (11911): cx231xx: Use v4l bounding/alignment function V4L/DVB (11910): mt9: Use v4l bounding/alignment function V4L/DVB (11909): cx23885: Use v4l bounding/alignment function V4L/DVB (11908): w8968cf: Use v4l bounding/alignment function V4L/DVB (11907): cx88: Use v4l bounding/alignment function V4L/DVB (11906): saa7134: Use v4l bounding/alignment function V4L/DVB (11905): vivi: Use v4l bounding/alignment function V4L/DVB (11904): zoran: Use v4l bounding/alignment functiob V4L/DVB (11903): sh_mobile_ceu_camera: Use v4l bounding/alignment function V4L/DVB (11902): pxa-camera: Use v4l bounding/alignment function V4L/DVB (11901): v4l2: Create helper function for bounding and aligning images V4L/DVB (12128): v4l2: update framework documentation. V4L/DVB (12125): v4l2: add new s_config subdev ops and v4l2_i2c_new_subdev_cfg/board calls V4L/DVB (12122): pvrusb2: De-obfuscate code which handles routing schemes V4L/DVB (12121): pvrusb2: Improve handling of routing schemes ...
2009-06-23Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: don't set IORDY for reset sata_fsl: Add power mgmt support [libata] PATA driver for CF interface on AT91SAM9260 SoC [libata] beautify module parameters
2009-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide cmd64x: Remove serialize setting. ide: Take over as maintainer.
2009-06-23Merge branches 'ehca', 'misc', 'mlx4', 'mthca' and 'nes' into for-linusRoland Dreier
2009-06-23RDMA: Add __init/__exit macros to addr.c and cma.cPeter Huewe
Add __init and __exit annotations to the module_init/module_exit functions from drivers/infiniband/core/addr.c and cma.c. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-23IB/ehca: Bump version numberAlexander Schmidt
Increment version number for DMEM toleration. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-23[WATCHDOG] wdt_pci.c: remove #ifdef CONFIG_WDT_501_PCIWim Van Sebroeck
Change the wdt_pci.c watchdog driver so that the code is the same for both the PCI-WDT500 as the PCI-WDT501 card. The selection of the card is now being done via the module parameter: 'type' instead of the config option CONFIG_WDT_501_PCI. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-23[WATCHDOG] hpwdt: Add NMI priority optionTom Mingarelli
Add a priority option so that the user can choose if we do the NMI first or last. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-23[WATCHDOG] OMAP fixes: enable clock in probe, trigger timer reloadUlrik Bech Hald
This patch contains two fixes: 1)In omap_wdt_probe() the watchdog is reset and disabled. This requires register access and the clks needs to be enabled temporarily 2)In omap_wdt_open() the timer register needs to be reloaded to trigger a new timer value (the default of 60s) Tested on OMAP34xx platform (Zoom1) Reviewed-by: Kevin Hilman <khilman@ti.deeprootsystems.com> Signed-off-by: Ulrik Bech Hald <ubh@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-23V4L/DVB (12131): BUGFIX: An incorrect Carrier Recovery Loop optimization ↵Manu Abraham
table was being loaded for a given chip version. This would cause the optimization in tuning not to be applied and thus a failed expectation, in tuning speed increment. The patch swaps the tables in use. It also fixes a possible one in a million condition where state->dev_ver implies an older Cut (Cut < 2.0, eventhough the driver doesn't attach to any Cut older than 2.0) or even negative (due to a bad I2C bus master driver) for the card combination. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing out the issue at large. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12130): Fix a redundant compiler warningManu Abraham
drivers/media/dvb/frontends/stv090x.c: In function ‘stv090x_optimize_carloop_short’: drivers/media/dvb/frontends/stv090x.c:2677: warning: ‘short_crl’ may be used uninitialized in this function Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12003): v4l2: Move bounding code outside I2C ifdef blockTrent Piepho
On Fri, 12 Jun 2009, Randy Dunlap wrote: > From: Randy Dunlap <randy.dunlap@oracle.com> > > Move v4l_bound_align_image() outside of an #ifdef CONFIG_I2C block > so that it is always built. Fixes a build error: clamp_align() should be moved as well, since it's only used by v4l_bound_align_image(). I'm attaching an alternate version that fixes this. Labeled the endif too. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11913): cx231xx: TRY_FMT should not actually set anythingTrent Piepho
In the TRY_FMT handler the function get_scale() is called to find what the scaler hardware will produce for a requested size. The problem is that get_scale(struct cx231xx *dev, ..., unsigned int *vscale, unsigned int *hscale) saves the calculated scale values into both the pointer arguments and into dev's hscale and vscale fields. TRY_FMT shouldn't actually change anything in the device state. The code to in get_scale() that writes to dev->[hv]scale can just be deleted. In all cases when dev's fields should be modified, get_scale() was called with get_scale(dev, ..., &dev->hscale, &dev->vscale), so dev was getting updated anyway. This didn't actually cause a problem because nothing ever actually made use of the hscale and vscale fields. I changed cx231xx_resolution_set() to use those fields rather than re-calculate them with a call to get_scale(). Updating [hv]scale in cx231xx_resolution_set() isn't necessary because every call of cx231xx_resolution_set() was already preceded by a call to get_scale() or setting the [hv]scale fields, so they will be always be up-to-date w.r.t. width and height. Removing the call to get_scale() from cx231xx_resolution_set() allowed making get_scale() a static function, which is a good thing for something with such a short name. There is already another function with the same name in the em28xx driver, but that one is static. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11912): em28xx: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. It appears that the em2800 can only scale by 50% or 100%, i.e. the only heights supported might be 240 and 480. In that case the old code would set any height other than 240 to 480. Request 240 get 240, but request 239 and then you get 480. Change it to round to the nearest supported value. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11911): cx231xx: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11910): mt9: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11909): cx23885: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11908): w8968cf: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. The existing code was casting pointers to u32 and to unsigned int into pointers to u16. This could mess up if someone passed in an image size greater than 65,535 and on big-endian platforms it won't work at all. The existing bounding code would shrink an image if it was too big, but returned ERANGE if it was too small. The code will not shrink or expand as necessary. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11907): cx88: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11906): saa7134: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11905): vivi: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11904): zoran: Use v4l bounding/alignment functiobTrent Piepho
The v4l function has a better algorithm for aligning image size. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11903): sh_mobile_ceu_camera: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11902): pxa-camera: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. For instance the old code would change 159x243 into 156x240 to meet the alignment requirements. The new function will use 160x243, which is a lot closer to what was asked for originally. Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (11901): v4l2: Create helper function for bounding and aligning imagesTrent Piepho
Most hardware has limits on minimum and maximum image dimensions and also requirements about alignment. For example, image width must be even or a multiple of four. Some hardware has requirements that the total image size (width * height) be a multiple of some power of two. v4l_bound_align_image() will enforce min and max width and height, power of two alignment on width and height, and power of two alignment on total image size. It uses an efficient algorithm that will try to find the "closest" image size that meets the requirements. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12125): v4l2: add new s_config subdev ops and ↵Hans Verkuil
v4l2_i2c_new_subdev_cfg/board calls Add a new s_config core ops call: this is called with the irq and platform data to be used to initialize the subdev. Added new v4l2_i2c_new_subdev_cfg and v4l2_i2c_new_subdev_board calls that allows you to pass these new arguments. The existing v4l2_i2c_new_subdev functions were modified to also call s_config. In the future the existing v4l2_i2c_new_subdev functions will be replaced by a single v4l2_i2c_new_subdev function similar to v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12122): pvrusb2: De-obfuscate code which handles routing schemesMike Isely
This change does not change any outward behavior; it merely chops down some large if-conditions with embedded assignments into something a little more maintainable for others (I of course never had a problem with this...). Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12121): pvrusb2: Improve handling of routing schemesMike Isely
The pvrusb2 driver has a concept of "routing scheme" which defines which physical inputs should be connected based on application's choice of logical input. The correct "routing scheme" depends on the specific device since different devices might wire up their muxes Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12120): pvrusb2: Change initial default frequency settingMike Isely
Change default frequency to be US Broadcast channel 3 - with the transition to d igital the previous value has now become useless. This change is PURELY to help with my testing (I need to set some kind of default so it might as well be some thing usable). Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12119): pvrusb2: Re-fix hardware scaling on video standard changeMike Isely
The cx25840 module's VBI initialization logic uses the current video standard as part of its internal algorithm. This therefore means that we probably need to make sure that the correct video standard has been set before initializing VBI. (Normally we would not care about VBI, but as described in an earlier changeset, VBI must be initialized correctly on the cx25840 in order for the chip's hardware scaler to operate correctly.) It's kind of messy to force the video standard to be set before initializing VBI (mainly because we can't know what the app really wants that early in the initialization process). So this patch does the next best thing: VBI is re-initialized after any point where the video standard has been set. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12118): pvrusb2: Fix hardware scaling when used with cx25840Mike Isely
The cx25840 module requires that its VBI initialization entry point be called in order for hardware-scaled video capture to work properly - even if we don't care about VBI. Making this behavior even more subtle is that if the capture resolution is set to 720x480 - which is the default that the pvrusb2 driver sets up - then the cx25840 bypasses the hardware scaler. Therefore this problem does not manifest itself until some other resolution, e.g. 640x480, is tried. MythTV typically defaults to 640x480 or 480x480, which means that things break whenever the driver is used with MythTV. This all has been known for a while (since at least Nov 2006), but recent changes in the pvrusb2 driver (specifically in regards to sub-device support) caused this to break again. VBI initialization must happen *after* the chip's firmware is loaded, not before. With this fix, 24xxx devices work correctly again. A related fix that is part of this changeset is that now we re-initialize VBI any time after we issue a reset to the cx25840 driver. Issuing a chip reset erases the state that the VBI setup previously did. Until the HVR-1950 came along this subtlety went unnoticed, because the pvrusb2 driver previously never issued such a reset. But with the HVR-1950 we have to do that reset in order to correctly transition from digital back to analog mode - and since the HVR-1950 always starts in digital mode (required for the DVB side to initialize correctly) then this device has never had a chance to work correctly in analog mode! Analog capture on the HVR-1950 has been broken this *ENTIRE* time. I had missed it until now because I've usually been testing at the default 720x480 resolution which does not require scaling... What fun. By re-initializing VBI after a cx25840 chip reset, correct behavior is restored. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12116): cx23885: ensure correct IF freq is used on HVR1200 & HVR1700Michael Krufky
Ensure that we're programming the tda18271 tuner with the correct IF frequencies to match the programming of the TDA10048 DVB-T demod for the HVR1200 and HVR1700 products. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12115): tda10048: add missing entry to pll_tab for 3.8 MHz IFMichael Krufky
Thanks for Terry Wu for pointing out the missing entry. Cc: Terry Wu <terrywu2009@gmail.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12112): cx231xx: fix uninitialized variable.Hans Verkuil
The variable 'rc' could be used uninitialized in the cx231xx_capture_start function. Sri informed me that it should be initialized to -1. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-28 08:12:45 +0000