summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2014-03-05hyperv: Move state setting for link queryHaiyang Zhang
It moves the state setting for query into rndis_filter_receive_response(). All callbacks including query-complete and status-callback are synchronized by channel->inbound_lock. This prevents pentential race between them. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05net: macb: DMA-unmap full rx-bufferSoren Brinkmann
When allocating RX buffers a fixed size is used, while freeing is based on actually received bytes, resulting in the following kernel warning when CONFIG_DMA_API_DEBUG is enabled: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1051 check_unmap+0x258/0x894() macb e000b000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002d170040] [map size=1536 bytes] [unmap size=60 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc3-xilinx-00220-g49f84081ce4f #65 [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14) [<c0011df8>] (show_stack) from [<c03c775c>] (dump_stack+0x7c/0xc8) [<c03c775c>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84) [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c) [<c0024670>] (warn_slowpath_fmt) from [<c0227d44>] (check_unmap+0x258/0x894) [<c0227d44>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70) [<c0228588>] (debug_dma_unmap_page) from [<c02ab78c>] (gem_rx+0x118/0x170) [<c02ab78c>] (gem_rx) from [<c02ac4d4>] (macb_poll+0x24/0x94) [<c02ac4d4>] (macb_poll) from [<c031222c>] (net_rx_action+0x6c/0x188) [<c031222c>] (net_rx_action) from [<c0028a28>] (__do_softirq+0x108/0x280) [<c0028a28>] (__do_softirq) from [<c0028e8c>] (irq_exit+0x84/0xf8) [<c0028e8c>] (irq_exit) from [<c000f360>] (handle_IRQ+0x68/0x8c) [<c000f360>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60) [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78) Exception stack(0xc056df20 to 0xc056df68) df20: 00000001 c0577430 00000000 c0577430 04ce8e0d 00000002 edfce238 00000000 df40: 04e20f78 00000002 c05981f4 00000000 00000008 c056df68 c0064008 c02d7658 df60: 20000013 ffffffff [<c0012904>] (__irq_svc) from [<c02d7658>] (cpuidle_enter_state+0x54/0xf8) [<c02d7658>] (cpuidle_enter_state) from [<c02d77dc>] (cpuidle_idle_call+0xe0/0x138) [<c02d77dc>] (cpuidle_idle_call) from [<c000f660>] (arch_cpu_idle+0x8/0x3c) [<c000f660>] (arch_cpu_idle) from [<c006bec4>] (cpu_startup_entry+0xbc/0x124) [<c006bec4>] (cpu_startup_entry) from [<c053daec>] (start_kernel+0x350/0x3b0) ---[ end trace d5fdc38641bd3a11 ]--- Mapped at: [<c0227184>] debug_dma_map_page+0x48/0x11c [<c02ab32c>] gem_rx_refill+0x154/0x1f8 [<c02ac7b4>] macb_open+0x270/0x3e0 [<c03152e0>] __dev_open+0x7c/0xfc [<c031554c>] __dev_change_flags+0x8c/0x140 Fixing this by passing the same size which is passed during mapping the memory to the unmap function as well. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05net: macb: Check DMA mappings for errorSoren Brinkmann
With CONFIG_DMA_API_DEBUG enabled the following warning is printed: WARNING: CPU: 0 PID: 619 at lib/dma-debug.c:1101 check_unmap+0x758/0x894() macb e000b000.ethernet: DMA-API: device driver failed to check map error[device address=0x000000002d171c02] [size=322 bytes] [mapped as single] Modules linked in: CPU: 0 PID: 619 Comm: udhcpc Not tainted 3.14.0-rc3-xilinx-00219-gd158fc7f36a2 #63 [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14) [<c0011df8>] (show_stack) from [<c03c7714>] (dump_stack+0x7c/0xc8) [<c03c7714>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84) [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c) [<c0024670>] (warn_slowpath_fmt) from [<c0228244>] (check_unmap+0x758/0x894) [<c0228244>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70) [<c0228588>] (debug_dma_unmap_page) from [<c02aba64>] (macb_interrupt+0x1f8/0x2dc) [<c02aba64>] (macb_interrupt) from [<c006c6e4>] (handle_irq_event_percpu+0x2c/0x178) [<c006c6e4>] (handle_irq_event_percpu) from [<c006c86c>] (handle_irq_event+0x3c/0x5c) [<c006c86c>] (handle_irq_event) from [<c006f548>] (handle_fasteoi_irq+0xb8/0x100) [<c006f548>] (handle_fasteoi_irq) from [<c006c148>] (generic_handle_irq+0x20/0x30) [<c006c148>] (generic_handle_irq) from [<c000f35c>] (handle_IRQ+0x64/0x8c) [<c000f35c>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60) [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78) Exception stack(0xed197f60 to 0xed197fa8) 7f60: 00000134 60000013 bd94362e bd94362e be96b37c 00000014 fffffd72 00000122 7f80: c000ebe4 ed196000 00000000 00000011 c032c0d8 ed197fa8 c0064008 c000ea20 7fa0: 60000013 ffffffff [<c0012904>] (__irq_svc) from [<c000ea20>] (ret_fast_syscall+0x0/0x48) ---[ end trace 478f921d0d542d1e ]--- Mapped at: [<c0227184>] debug_dma_map_page+0x48/0x11c [<c02aaca0>] macb_start_xmit+0x184/0x2a8 [<c03143c0>] dev_hard_start_xmit+0x334/0x470 [<c032c09c>] sch_direct_xmit+0x78/0x2f8 [<c0314814>] __dev_queue_xmit+0x318/0x708 due to missing checks of the dma mapping. Add the appropriate checks to fix this. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05r8152: disable the ECM modehayeswang
There are known issues for switching the drivers between ECM mode and vendor mode. The interrup transfer may become abnormal. The hardware may have the opportunity to die if you change the configuration without unloading the current driver first, because all the control transfers of the current driver would fail after the command of switching the configuration. Although to use the ecm driver and vendor driver independently is fine, it may have problems to change the driver from one to the other by switching the configuration. Additionally, now the vendor mode driver is more powerful than the ECM driver. Thus, disable the ECM mode driver, and let r8152 to set the configuration to vendor mode and reset the device automatically. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05net/mlx4: Support shutdown() interfaceGavin Shan
In kexec scenario, we failed to load the mlx4 driver in the second kernel because the ownership bit was hold by the first kernel without release correctly. The patch adds shutdown() interface so that the ownership can be released correctly in the first kernel. It also helps avoiding EEH error happened during boot stage of the second kernel because of undesired traffic, which can't be handled by hardware during that stage on Power platform. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix memory leak in ieee80211_prep_connection(), sta_info leaked on error. From Eytan Lifshitz. 2) Unintentional switch case fallthrough in nft_reject_inet_eval(), from Patrick McHardy. 3) Must check if payload lenth is a power of 2 in nft_payload_select_ops(), from Nikolay Aleksandrov. 4) Fix mis-checksumming in xen-netfront driver, ip_hdr() is not in the correct place when we invoke skb_checksum_setup(). From Wei Liu. 5) TUN driver should not advertise HW vlan offload features in vlan_features. Fix from Fernando Luis Vazquez Cao. 6) IPV6_VTI needs to select NET_IPV_TUNNEL to avoid build errors, fix from Steffen Klassert. 7) Add missing locking in xfrm_migrade_state_find(), we must hold the per-namespace xfrm_state_lock while traversing the lists. Fix from Steffen Klassert. 8) Missing locking in ath9k driver, access to tid->sched must be done under ath_txq_lock(). Fix from Stanislaw Gruszka. 9) Fix two bugs in TCP fastopen. First respect the size argument given to tcp_sendmsg() in the fastopen path, and secondly prevent tcp_send_syn_data() from potentially using order-5 allocations. From Eric Dumazet. 10) Fix handling of default neigh garbage collection params, from Jiri Pirko. 11) Fix cwnd bloat and over-inflation of RTT when transmit segmentation is in use. From Eric Dumazet. 12) Missing initialization of Realtek r8169 driver's statistics seqlocks. Fix from Kyle McMartin. 13) Fix RTNL assertion failures in 802.3ad and AB ARP monitor of bonding driver, from Ding Tianhong. 14) Bonding slave release race can cause divide by zero, fix from Nikolay Aleksandrov. 15) Overzealous return from neigh_periodic_work() causes reachability time to not be computed. Fix from Duain Jiong. 16) Fix regression in ipv6_find_hdr(), it should not return -ENOENT when a specific target is specified and found. From Hans Schillstrom. 17) Fix VLAN tag stripping regression in BNA driver, from Ivan Vecera. 18) Tail loss probe can calculate bogus RTTs due to missing packet marking on retransmit. Fix from Yuchung Cheng. 19) We cannot do skb_dst_drop() in iptunnel_pull_header() because multicast loopback detection in later code paths need access to skb_rtable(). Fix from Xin Long. 20) The macvlan driver regresses in that it propagates lower device offload support disables into itself, causing severe slowdowns when running over a bridge. Provide the software offloads always on macvlan devices to deal with this and the regression is gone. From Vlad Yasevich. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits) macvlan: Add support for 'always_on' offload features net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable ip_tunnel:multicast process cause panic due to skb->_skb_refdst NULL pointer net: cpsw: fix cpdma rx descriptor leak on down interface be2net: isolate TX workarounds not applicable to Skyhawk-R be2net: Fix skb double free in be_xmit_wrokarounds() failure path be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode be2net: Fix to reset transparent vlan tagging qlcnic: dcb: a couple off by one bugs tcp: fix bogus RTT on special retransmission hsr: off by one sanity check in hsr_register_frame_in() can: remove CAN FD compatibility for CAN 2.0 sockets can: flexcan: factor out soft reset into seperate funtion can: flexcan: flexcan_remove(): add missing netif_napi_del() can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze can: flexcan: factor out transceiver {en,dis}able into seperate functions can: flexcan: fix transition from and to low power mode in chip_{en,dis}able can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails can: flexcan: fix shutdown: first disable chip, then all interrupts USB AX88179/178A: Support D-Link DUB-1312 ...
2014-03-04Merge tag 'regulator-v3.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes here which ensure that regulators using the core support for GPIO enables work in all cases by ensuring that helpers are used consistently rather than open coding in places and hence not having GPIO support in some of them" * tag 'regulator-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Replace direct ops->disable usage regulator: core: Replace direct ops->enable usage
2014-03-04Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton akpm@linux-foundation.org>: mm: page_alloc: exempt GFP_THISNODE allocations from zone fairness mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS MAINTAINERS: add and correct types of some "T:" entries MAINTAINERS: use tab for separator rapidio/tsi721: fix tasklet termination in dma channel release hfsplus: fix remount issue zram: avoid null access when fail to alloc meta sh: prefix sh-specific "CCR" and "CCR2" by "SH_" ocfs2: fix quota file corruption drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX kallsyms: fix absolute addresses for kASLR scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression mm: include VM_MIXEDMAP flag in the VM_SPECIAL list to avoid m(un)locking memcg: reparent charges of children before processing parent memcg: fix endless loop in __mem_cgroup_iter_next() lib/radix-tree.c: swapoff tmpfs radix_tree: remember to rcu_read_unlock dma debug: account for cachelines and read-only mappings in overlap tracking mm: close PageTail race MAINTAINERS: EDAC: add Mauro and Borislav as interim patch collectors
2014-03-04rapidio/tsi721: fix tasklet termination in dma channel releaseAlexandre Bounine
This patch is a modification of the patch originally proposed by Xiaotian Feng <xtfeng@gmail.com>: https://lkml.org/lkml/2012/11/5/413 This new version disables DMA channel interrupts and ensures that the tasklet wil not be scheduled again before calling tasklet_kill(). Unfortunately the updated patch was not released at that time due to planned rework of Tsi721 mport driver to use threaded interrupts (which has yet to happen). Recently the issue was reported again: https://lkml.org/lkml/2014/2/19/762. Description from the original Xiaotian's patch: "Some drivers use tasklet_disable in device remove/release process, tasklet_disable will inc tasklet->count and return. If the tasklet is not handled yet under some softirq pressure, the tasklet will be placed on the tasklet_vec, never have a chance to be excuted. This might lead to a heavy loaded ksoftirqd, wakeup with pending_softirq, but tasklet is disabled. tasklet_kill should be used in this case." This patch is applicable to kernel versions starting from v3.5. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Xiaotian Feng <xtfeng@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Galbraith <bitbucket@online.de> Cc: <stable@vger.kernel.org> [3.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-04zram: avoid null access when fail to alloc metaMinchan Kim
zram_meta_alloc could fail so caller should check it. Otherwise, your system will hang. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-04drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT ↵Vikas Sajjan
for TYPE_S3C64XX On exynos5250, exynos5420 and exynos5260 it was observed that, after 1 cycle of S2R, the rtc-tick occurs at a very fast rate as compared to the rtc-tick occuring before S2R. This patch fixes the above issue by correcting the wrong way of save/restore of S3C2410_TICNT for TYPE_S3C64XX. Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-04mm: close PageTail raceDavid Rientjes
Commit bf6bddf1924e ("mm: introduce compaction and migration for ballooned pages") introduces page_count(page) into memory compaction which dereferences page->first_page if PageTail(page). This results in a very rare NULL pointer dereference on the aforementioned page_count(page). Indeed, anything that does compound_head(), including page_count() is susceptible to racing with prep_compound_page() and seeing a NULL or dangling page->first_page pointer. This patch uses Andrea's implementation of compound_trans_head() that deals with such a race and makes it the default compound_head() implementation. This includes a read memory barrier that ensures that if PageTail(head) is true that we return a head page that is neither NULL nor dangling. The patch then adds a store memory barrier to prep_compound_page() to ensure page->first_page is set. This is the safest way to ensure we see the head page that we are expecting, PageTail(page) is already in the unlikely() path and the memory barriers are unfortunately required. Hugetlbfs is the exception, we don't enforce a store memory barrier during init since no race is possible. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Holger Kiehl <Holger.Kiehl@dwd.de> Cc: Christoph Lameter <cl@linux.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-03macvlan: Add support for 'always_on' offload featuresVlad Yasevich
Macvlan currently inherits all of its features from the lower device. When lower device disables offload support, this causes macvlan to disable offload support as well. This causes performance regression when using macvlan/macvtap in bridge mode. It can be easily demonstrated by creating 2 namespaces using macvlan in bridge mode and running netperf between them: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.00 1204.61 To restore the performance, we add software offload features to the list of "always_on" features for macvlan. This way when a namespace or a guest using macvtap initially sends a packet, this packet will not be segmented at macvlan level. It will only be segmented when macvlan sends the packet to the lower device. MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.00 5507.35 Fixes: 6acf54f1cf0a6747bac9fea26f34cfc5a9029523 (macvtap: Add support of packet capture on macvtap device.) Fixes: 797f87f83b60685ff8a13fa0572d2f10393c50d3 (macvlan: fix netdev feature propagation from lower device) CC: Florian Westphal <fw@strlen.de> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Jason Wang <jasowang@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Please pull this batch of fixes intended for the 3.14 stream... For the mac80211 bits, Johannes says: "This time I have a fix to get out of an 'infinite error state' in case regulatory domain updates failed and two fixes for VHT associations: one to not disconnect immediately when the AP uses more bandwidth than the new regdomain would allow after a change due to association country information getting used, and one for an issue in the code where mac80211 doesn't correctly ignore a reserved field and then uses an HT instead of VHT association." For the iwlwifi bits, Emmanuel says: "Johannes fixes a long standing bug in the AMPDU status reporting. Max fixes the listen time which was way too long and causes trouble to several APs." Along with those, Bing Zhao marks the mwifiex_usb driver as _not_ supporting USB autosuspend after a number of problems with that have been reported. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03Merge tag 'linux-can-fixes-for-3.14-20140303' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can linux-can-fixes-for-3.14-20140303 Marc Kleine-Budde says: ==================== this is a pull request of 8 patches. Oliver Hartkopp contributes a patch which removes the CAN FD compatibility for CAN 2.0 sockets, as it turns out that this compatibility has some conceptual cornercases. The remaining 7 patches are by me, they address a problem in the flexcan driver. When shutting down the interface ("ifconfig can0 down") under heavy network load the whole system will hang. This series reworks the actual sequence in close() and the transition from and to the low power modes of the CAN controller. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03net: cpsw: fix cpdma rx descriptor leak on down interfaceSchuyler Patton
This patch fixes a CPDMA RX Descriptor leak that occurs after taking the interface down when the CPSW is in Dual MAC mode. Previously the CPSW_ALE port was left open up which causes packets to be received and processed by the RX interrupt handler and were passed to the non active network interface where they were ignored. The fix is for the slave_stop function of the selected interface to disable the respective CPSW_ALE Port from forwarding packets. This blocks traffic from being received on the inactive interface. Signed-off-by: Schuyler Patton <spatton@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03be2net: isolate TX workarounds not applicable to Skyhawk-RVasundhara Volam
Some of TX workarounds in be_xmit_workarounds() routine are not applicable (and result in HW errors) to Skyhawk-R chip. Isolate BE3-R/Lancer specific workarounds to a separate routine. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03be2net: Fix skb double free in be_xmit_wrokarounds() failure pathVasundhara Volam
skb_padto(), skb_share_check() and __vlan_put_tag() routines free skb when they return an error. This patch fixes be_xmit_workarounds() to not free skb again in such cases. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03be2net: clear promiscuous bits in adapter->flags while disabling promiscuous ↵Somnath kotur
mode We should clear promiscuous bits in adapter->flags while disabling promiscuous mode. Else we will not put interface back into VLAN promisc mode if the vlans already added exceeds the maximum limit. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03be2net: Fix to reset transparent vlan taggingSomnath Kotur
For disabling transparent tagging issue SET_HSW_CONFIG with pvid_valid=1 and pvid=0xFFFF and not with the default pvid as this case would fail in Lancer. Hence removing the get_hsw_config call from be_vf_setup() as it's only use of getting default pvid is no longer needed. Also do proper housekeeping only if the FW command succeeds. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03qlcnic: dcb: a couple off by one bugsDan Carpenter
The ->tc_cfg[] array has QLC_DCB_MAX_TC (8) elements so the check is off by one. These functions are always called with valid values though so it doesn't affect how the code works. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2014-03-03Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clk framework fixes from Mike Turquette: "Clock framework and driver fixes, all of which fix user-visible regressions. There is a single framework fix that prevents dereferencing a NULL pointer when calling clk_get. The range of fixes for clock driver regressions spans memory leak fixes, touching the wrong registers that cause things to explode, misconfigured clock rates that result in non-responsive devices and even some boot failures. The most benign fix is DT binding doc typo. It is a stable ABI exposed from the kernel that was introduced in -rc1, so best to fix it now" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk:at91: Fix memory leak in of_at91_clk_master_setup() clk: nomadik: fix multiplatform problem clk: Correct handling of NULL clk in __clk_{get, put} clk: shmobile: Fix typo in MSTP clock DT bindings clk: shmobile: rcar-gen2: Fix qspi divisor clk: shmobile: rcar-gen2: Fix clock parent for all non-PLL clocks clk: tegra124: remove gr2d and gr3d clocks clk: tegra: Fix vic03 mux index clk: shmobile: rcar-gen2: Fix qspi divisor clk: shmobile: rcar-gen2: Fix clock parent all non-PLL clocks clk: tegra: use max divider if divider overflows clk: tegra: cclk_lp has a pllx/2 divider clk: tegra: fix sdmmc clks on Tegra1x4 clk: tegra: fix host1x clock on Tegra124 clk: tegra: PLLD2 fixes for hdmi clk: tegra: Fix PLLD mnp table clk: tegra: Fix PLLP rate table clk: tegra: Correct clock number for UARTE clk: tegra: Add missing Tegra20 fuse clks ARM: keystone: dts: fix clkvcp3 control register address ...
2014-03-03can: flexcan: factor out soft reset into seperate funtionMarc Kleine-Budde
This patch moves the soft reset into a seperate function. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-03-03can: flexcan: flexcan_remove(): add missing netif_napi_del()Marc Kleine-Budde
This patch adds the missing netif_napi_del() to the flexcan_remove() function. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-03-03can: flexcan: fix transition from and to freeze mode in chip_{,un}freezeMarc Kleine-Budde
This patch factors out freeze and unfreeze of the CAN core into seperate functions. Experiments have shown that the transition from and to freeze mode may take several microseconds, especially the time entering the freeze mode depends on the current bitrate. This patch adds a while loop which polls the Freeze Mode ACK bit (FRZ_ACK) that indicates a successfull mode change. If the function runs into a timeout a error value is returned. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-03-03can: flexcan: factor out transceiver {en,dis}able into seperate functionsMarc Kleine-Budde
This patch moves the transceiver enable and disable into seperate functions, where the NULL pointer check is hidden. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-03-03can: flexcan: fix transition from and to low power mode in chip_{en,dis}ableMarc Kleine-Budde
In flexcan_chip_enable() and flexcan_chip_disable() fixed delays are used. Experiments have shown that the transition from and to low power mode may take several microseconds. This patch adds a while loop which polls the Low Power Mode ACK bit (LPM_ACK) that indicates a successfull mode change. If the function runs into a timeout a error value is returned. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-03-03can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() failsMarc Kleine-Budde
If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed, this patch adds the missing cleanup. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-03-03can: flexcan: fix shutdown: first disable chip, then all interruptsMarc Kleine-Budde
When shutting down the CAN interface (ifconfig canX down) during high CAN bus loads, the CAN core might hang and freeze the whole CPU. This patch fixes the shutdown sequence by first disabling the CAN core then disabling all interrupts. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-03-02USB AX88179/178A: Support D-Link DUB-1312Gerry Demaret
Add the USB device ID for the D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter to the AX88179/178A driver. Signed-off-by: Gerry Demaret <gerry@tigron.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02b44: always set duplex mode why phy changesHauke Mehrtens
Without this patch b44_check_phy() was called when the phy called the adjust callback. This method only change the mac duplex mode when the carrier was off. When the phy changed the duplex mode after the carrier was on the mac was not changed. This happened when an external phy was used. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02b44: add calls to phy_{start,stop}Hauke Mehrtens
When support for external phys was added to b44, the calls to start and stop the phy were missing in the mac driver. This adds the calls to phy_start() and phy_stop(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Not a huge amount happening, some MAINTAINERS updates, radeon, vmwgfx and tegra fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: avoid null pointer dereference at failure paths drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date. drm/vmwgfx: Remove some unused surface formats drm/radeon: enable speaker allocation setup on dce3.2 drm/radeon: change audio enable logic drm/radeon: fix audio disable on dce6+ drm/radeon: free uvd ring on unload drm/radeon: disable pll sharing for DP on DCE4.1 drm/radeon: fix missing bo reservation drm/radeon: print the supported atpx function mask MAINTAINERS: update drm git tree entry MAINTAINERS: add entry for drm radeon driver drm/tegra: Add guard to avoid double disable/enable of RGB outputs gpu: host1x: do not check previously handled gathers drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'
2014-03-02Merge tag 'usb-3.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are 2 USB patches for 3.14-rc5, one a new device id, and the other fixes a reported problem with threaded irqs and the USB EHCI driver" * tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: ehci: fix deadlock when threadirqs option is used USB: ftdi_sio: add Cressi Leonardo PID
2014-03-02Merge tag 'staging-3.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fixes from Greg KH: "Here are a few IIO fixes, and a new device id for a staging driver for 3.14-rc5. All have been in linux-next for a while, I did a final merge to get the IIO fixes into this tree, they were incorrectly in the char-misc tree for a few weeks, and I forgot to tell you to pull them from there. This makes it a single pull request for you" * tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Add new device ID staging:iio:adc:MXS:LRADC: fix touchscreen statemachine iio:gyro: bug on L3GD20H gyroscope support iio: cm32181: Change cm32181 ambient light sensor driver iio: cm36651: Fix read/write integration time function.
2014-03-03Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes more radeon fixes * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: enable speaker allocation setup on dce3.2 drm/radeon: change audio enable logic drm/radeon: fix audio disable on dce6+ drm/radeon: free uvd ring on unload drm/radeon: disable pll sharing for DP on DCE4.1 drm/radeon: fix missing bo reservation drm/radeon: print the supported atpx function mask
2014-03-02Merge iio fixes into staging-linusGreg Kroah-Hartman
These I forgot about before, but need to get into 3.14-final. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-02drm/vmwgfx: avoid null pointer dereference at failure pathsAlexey Khoroshilov
vmw_takedown_otable_base() and vmw_mob_unbind() check for potential vmw_fifo_reserve() failure and print error message, but then immediately dereference NULL pointer. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2014-03-02drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver ↵Thomas Hellstrom
date. Backing mob contents is propagated to user-space, so make sure backing mobs are cleared when allocated. This also accidently fix rendering errors with celestia when emulating legacy mode. Also update driver date. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2014-03-02drm/vmwgfx: Remove some unused surface formatsThomas Hellstrom
These formats are deprecated. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2014-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the series are bugfixes for qla2xxx target NPIV support that went in for v3.14-rc1. Also included are a few DIF related fixes, a qla2xxx fix (Cc'ed to stable) from Greg W., and vhost/scsi protocol version related fix from Venkatesh. Also just a heads up that a series to address a number of issues with iser-target active I/O reset/shutdown is still being tested, and will be included in a separate -rc6 PULL request" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: vhost/scsi: Check LUN structure byte 0 is set to 1, per spec qla2xxx: Fix kernel panic on selective retransmission request Target/sbc: Don't use sg as iterator in sbc_verify_read target: Add DIF sense codes in transport_generic_request_failure target/sbc: Fix sbc_dif_copy_prot addr offset bug tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs tcm_qla2xxx: Perform configfs depend/undepend for base_tpg tcm_qla2xxx: Add NPIV specific enable/disable attribute logic qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown qla2xxx: Fix qlt_lport_register base_vha callback race
2014-03-01Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dma fixes from Vinod Koul: "This request brings you two small fixes. First one for fixing dereference of freed descriptor and second for fixing sdma bindings for it to work for imx25. I was planning to send this about 10days ago but then I had to proceed on my paternity leave and didnt get chance to send this. Now got a bit of time from dady duties :)" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: sdma: Add imx25 compatible dma: ste_dma40: don't dereference free:d descriptor
2014-03-01Merge tag 'pm+acpi-3.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These three commits fix a recent intel_pstate regression and two old bugs that should be fixed in -stable too, one in the ACPI processor driver and one in the firmare loader. Specifics: - One of the recent intel_pstate driver fixes introduced a rounding error that on some systems causes the frequency to be stuck at the lowest level forever. Fix from Dirk Brandewie. - The firmware_class driver's PM notifier doesn't handle the PM_RESTORE_PREPARE event during hibernation image restore and that leads to a deadlock on umhelper_sem in __usermodehelper_disable(). Fix from Sebastian Capella. - acpi_processor_set_throttling() abuses set_cpus_allowed_ptr() in a nasty way which triggers the WARN_ON_ONCE() in wq_worker_waking_up() among other things. Fix from Lan Tianyu" * tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Rework processor throttling with work_on_cpu() PM / hibernate: Fix restore hang in freeze_processes() intel_pstate: Change busy calculation to use fixed point math.
2014-02-28Merge tag 'fixes-for-3.14d' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Fourth set of IIO fixes for the 3.14 kernel. A single line patch fixing a regression that was introduced in 3.13 in the reworking of the mxs touch screen and ADC drivers to be interrupt rather than polling driven. It resulted in a stray double reporting of the release coordinate in the touch screen driver. The bug lay in the adc side of the driver which left the statemachine in the wrong state.
2014-02-28bna: fix vlan tag stripping and implement its togglingIvan Vecera
The recent commit "fe1624c bna: RX Filter Enhancements" disables VLAN tag stripping if the NIC is in promiscuous mode. This causes __vlan_hwaccel_put_tag() is called when the stripping is disabled. Because of this VLAN over bna does not work and causes BUGs in conjunction with openvswitch like this: Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28tg3: Don't check undefined error bits in RXBDMichael Chan
Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes a customer reported issue of randomly dropping packets on the 5719. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28Merge tag 'dm-3.14-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "A few dm-cache fixes, an invalid ioctl handling fix for dm multipath, a couple immutable biovec fixups for dm mirror, and a few dm-thin fixes. There will likely be additional dm-thin metadata and data resize fixes to include in 3.14-rc6 next week. Note to stable-minded folks: Immutable biovecs were introduced in 3.14, so the related fixups for dm mirror are not needed in stable@ kernels" * tag 'dm-3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix truncation bug when mapping I/O to >2TB fast device dm thin: allow metadata space larger than supported to go unused dm mpath: fix stalls when handling invalid ioctls dm thin: fix the error path for the thin device constructor dm raid1: fix immutable biovec related BUG when retrying read bio dm io: fix I/O to multiple destinations dm thin: avoid metadata commit if a pool's thin devices haven't changed dm cache: do not add migration to completed list before unhooking bio dm cache: move hook_info into common portion of per_bio_data structure
2014-02-28Merge tag 'sound-3.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "It's a bad habit to get a higher volume of fixes often lately, but things happen again. All commits found here are real bug fixes, and are mostly trivial. Most of changes in ASoC are the fixes for enum items due to the wrong API usages, in addition to a few DAPM mutex deadlock and other fixes. In HD-audio, only fixups for HP laptops. Although diffstat shows much, the changes are simple: there are just so many different device entries there" * tag 'sound-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: sta32x: Fix wrong enum for limiter2 release rate ASoC: da732x: Mark DC offset control registers volatile ALSA: hda/realtek - Add more entry for enable HP mute led ALSA: hda - Add a fixup for HP Folio 13 mute LED ASoC: wm8958-dsp: Fix firmware block loading ASoC: sta32x: Fix cache sync ALSA: hda/realtek - Add more entry for enable HP mute led ASoC: dapm: Add locking to snd_soc_dapm_xxxx_pin functions Input - arizona-haptics: Fix double lock of dapm_mutex ASoC: wm8400: Fix the wrong number of enum items ASoC: isabelle: Fix the wrong number of items in enum ctls ASoC: ad1980: Fix wrong number of items for capture source ASoC: wm8994: Fix the wrong number of enum items ASoC: wm8900: Fix the wrong number of enum items ASoC: wm8770: Fix wrong number of enum items ASoC: sta32x: Fix array access overflow ASoC: dapm: Correct regulator bypass error messages
2014-02-28Merge tag 'edac_fixes_for_3.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fixes from Borislav Petkov: "Two fixes below for PCI devices disappearing when a reference count underflow happens after a couple of insmod/rmmod cycles in succession" * tag 'edac_fixes_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: i7300_edac: Fix device reference count i7core_edac: Fix PCI device reference count