summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2014-12-10rtc: omap: drop vendor-prefix from power-controller dt propertyJohan Hovold
Drop the vendor-prefix from the "ti,system-power-controller" device-tree property name. It has been agreed to make "system-power-controller" a standard property and to drop the vendor-prefix that is currently used by several drivers. Note that drivers that have used "<vendor>,system-power-controller" in a released kernel will need to support both versions. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/rtc-isl12057.c: report error code upon failure in dev_err() callsArnaud Ebalard
As pointed out by Mark, it is generally useful to log the error code when reporting a failure. This patch improves existing calls to dev_err() in ISL12057 driver to also report error code. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Suggested-by: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Grant Likely <grant.likely@linaro.org> Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/rtc-isl12057.c: add proper handling of oscillator failure bitArnaud Ebalard
As suggested by Uwe, instead of clearing oscillator failure bit unconditionally at driver load, this patch adds proper handling of the flag. The driver now returns -ENODATA when reading time from the device and oscillator failure bit is set. The flag is now cleared only when the a new time value is pushed to the device. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Reported-by: Uwe Kleine-König <uwe@kleine-koenig.org> Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/rtc-isl12057.c: add support for century bitArnaud Ebalard
The month register of ISL12057 RTC chip includes a century bit which reports overflow of year register from 99 to 0. This bit can also be written, which allows using it to extend the time interval the chip can support from 99 to 199 years. This patch adds support for century overflow bit in tm to regs and regs to tm helpers in ISL12057 driver. This was tested by putting a device 100 years in the future (using a specific kernel due to the inability of userland tools such as date or hwclock to pass year 2038), rebooting on a kernel w/ this patch applied and verifying the device was still 100 years in the future. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Suggested-by: Uwe Kleine-König <uwe@kleine-koenig.org> Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/rtc-isl12057.c: fix masking of register valuesArnaud Ebalard
When Intersil ISL12057 support was added by commit 70e123373c05 ("rtc: Add support for Intersil ISL12057 I2C RTC chip"), two masks for time registers values imported from the device were either wrong or omitted, leading to additional bits from those registers to impact read values: - mask for hour register value when reading it in AM/PM mode. As AM/PM mode is not the usual mode used by the driver, this error would only have an impact on an externally configured RTC hour later read by the driver. - mask for month value. The lack of masking would provide an erroneous value if century bit is set. This patch fixes those two masks. Fixes: 70e123373c05 ("rtc: Add support for Intersil ISL12057 I2C RTC chip") Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: ds1307: add support for mcp7940x chipsTomas Novotny
MCP7940x is same RTC as MCP7941x. The difference is that MCP7941x chips contain additional EEPROM on a different i2c address. DS1307 driver already supports MCP7941x, so just add a new i2c device id and rename functions and defines accordingly. Signed-off-by: Tomas Novotny <tomas@novotny.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/rtc-ds1374.c: add watchdog supportSøren Andersen
Add support for the watchdog functionality of the DS1374 rtc. Based on the m41t80 watchdog functionality Note: watchdog uses the same registers as alarm. [akpm@linux-foundation.org: don't forget mutex_unlock() in ds1374_wdt_open() error path] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Soeren Andersen <san@rosetechnology.dk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/rtc-sirfsoc.c: replace local_irq_disable by spin_lock_irq for ↵Barry Song
SMP safety Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: hao liu <hao.liu@csr.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/rtc-sirfsoc.c: add alarm_irq_enable supporthao liu
Add missed alarm_irq_enable() callback for CSR SiRFSoC RTCs. [akpm@linux-foundation.org: remove unneeded cast] Signed-off-by: hao liu <hao.liu@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: clear expired alarm at boot timeJan Kardell
In case the card is woken up of the rtc alarm, the devm_rtc_device_register function detects it as a pending alarm about a month in the future. Fix this by clearing the alarm in module probe. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: save battery powerJan Kardell
According to Haoyu hym8563 datasheet this saves som power. Might be importat to battery life. And maybe it works for the NXP part as well. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: handle consequeces of lacking second alarm regJan Kardell
To guarantee that a set alarm occurs in the future, the set alarm time is rounded up to the nearest minute. Also we cannot handle UIE as it requires second precision. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: fix wrong time from read_alarmJan Kardell
Incorrect mask was used for hour and monthday fields. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: fix write of invalid bits to ST2 regJan Kardell
The NXP datasheet says: "Bits labeled as N should always be written with logic 0." At least one of those bits is sometime read as a 1, therfore violating this rule. To fix this we mask away those bits. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: pcf8563: remove leftover codeJan Kardell
Remove some code that was left from before block read/write was used. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add copyright entryJohan Hovold
Add myself to the list of copyright holders. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix minor coding style issuesJohan Hovold
Fix minor coding style issues like comment style, indentation and remove a few unnecessary casts. Also drop the 1 from OMAP1 in the driver description. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: enable wake-up from power offJohan Hovold
The ALARM interrupt must not be disabled during shutdown in order to be able to power up the system using an RTC alarm. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add support for pmic_power_enJohan Hovold
Add new property "ti,system-power-controller" to register the RTC as a power-off handler. Some RTC IP revisions can control an external PMIC via the pmic_power_en pin, which can be configured to transition to OFF on ALARM2 events and back to ON on subsequent ALARM (wakealarm) events. This is based on earlier work by Colin Foe-Parker and AnilKumar Ch. [1] [1] https://www.mail-archive.com/linux-omap@vger.kernel.org/msg82127.html [akpm@linux-foundation.org: add comment] Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Colin Foe-Parker <colin.foeparker@logicpd.com> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add helper to read 32-bit registersJohan Hovold
Add helper to read full register width. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add helper to read raw bcd timeJohan Hovold
Add helper to read raw BCD time that can be used in interrupt context. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: silence bogus power-up reset message at probeJohan Hovold
Some legacy RTC IP revisions has a power-up reset flag in the status register that later revisions lack. As this flag is always read back as set on later revisions (or is overloaded with a different flag), make sure to only clear the flag and print the info message on legacy platforms. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add structured device-type infoJohan Hovold
Add structured device-type info to encode IP-block revision differences. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: remove DRIVER_NAME macroJohan Hovold
Remove DRIVER_NAME macro which was used for unrelated strings (e.g. id-table entry and module name), but not for related ones (e.g. module name and alias). Also move the module alias to the other module-info entries. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: add device abstractionJohan Hovold
Add struct omap_rtc to hold previously global data as well as the IP-block feature flags. Also convert the register-access macros to proper inline helper functions. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: make platform-device id table constJohan Hovold
Make platform-device id table const. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: use dev_infoJohan Hovold
Use dev_info rather than pr_info. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: remove unused register-base defineJohan Hovold
Remove register-base define, which is no longer used. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix class-device registrationJohan Hovold
Make sure not to register the class device until after the device has been configured. Currently, the device is not fully configured (e.g. 24-hour mode) when the class device is registered, something which involves driver callbacks for example to read the current time. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: clean up probe error handlingJohan Hovold
Remove some debug messages and return errors from subsystems rather than always fail with -EIO. Note that the class-registration error has already been logged by rtc core. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix interrupt disable at probeJohan Hovold
Use writel instead of writeb when disabling interrupts at probe as ALARM2 is not cleared otherwise on some IP-block revisions (e.g. AM3352). Note that the driver currently never enables the ALARM2 interrupt. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix missing wakealarm attributeJohan Hovold
The platform device must be registered as wakeup capable before registering the class device, or the wakealarm attribute will not be created. Also make sure to unregister the wakeup source on probe errors. Fixes: 1d2e2b65d098 ("rtc: omap: restore back (hard-code) wakeup support") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10rtc: omap: fix clock-source configurationJohan Hovold
This series fixes a few issues with the omap rtc-driver, cleans up a bit, adds device abstraction, and finally adds support for the PMIC control feature found in some revisions of this RTC IP block. Ultimately, this allows for powering off the Beaglebone and waking it up again on RTC alarms. This patch (of 20): Make sure not to reset the clock-source configuration when enabling the 32kHz clock mux. Until the clock source can be configured through device tree we must not overwrite settings made by the bootloader (e.g. clock-source selection). Fixes: cd914bba03d8 ("drivers/rtc/rtc-omap.c: add support for enabling 32khz clock") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/interface.c: check the validation of rtc_time in __rtc_read_timeHyogi Gim
Some rtc devices always return '0' when rtc_class_ops.read_time is called. So if rtc_time isn't verified in callback, rtc interface cannot know whether rtc_time is valid. Check rtc_time by using 'rtc_valid_tm' in '__rtc_read_time'. And add the message for debugging. Signed-off-by: Hyogi Gim <hyogi.gim@lge.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10drivers/rtc/rtc-sirfsoc.c: move hardware initilization earlier in probeGuo Zeng
Move rtc register to be later than hardware initialization. The reason is that devm_rtc_device_register() will do read_time() which is a callback accessing hardware. This sometimes causes a hang in the hardware related callback. Signed-off-by: Guo Zeng <guo.zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10printk: add and use LOGLEVEL_<level> defines for KERN_<LEVEL> equivalentsJoe Perches
Use #defines instead of magic values. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10cma: make default CMA area size zero for x86Akinobu Mita
This makes CMA memory area size zero for x86 in default configuration (doesn't change on the other architectures). If default CMA size is zero, DMA_CMA is disabled. It can be enabled by passing cma= to the kernel. This makes less impact on x86. Because there is no mainline driver that requires it for x86, and Peter Hurley reported the performance regression, as this is trying to drive _all_ dma mapping allocations through a _very_ small window. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reported-by: Peter Hurley <peter@hurleysoftware.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Jean Delvare <jdelvare@suse.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-11Merge tag 'topic/core-stuff-2014-12-10' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Merge drm core fixes from Daniel. * tag 'topic/core-stuff-2014-12-10' of git://anongit.freedesktop.org/drm-intel: drm: Zero out DRM object memory upon cleanup drm: fix a typo in a comment drm: fix a word repetition in a comment drm: Fix memory leak at error path of drm_read() drm/Documentation: Fix rowspan value in drm-kms-properties drm/edid: Restore kerneldoc consistency drm/edid: new drm_edid_block_checksum helper function V3 drm/edid: shorten log output in case of all zeroes edid block drm/edid: move drm_edid_is_zero to top, make edid argument const
2014-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS changes from Al Viro: "First pile out of several (there _definitely_ will be more). Stuff in this one: - unification of d_splice_alias()/d_materialize_unique() - iov_iter rewrite - killing a bunch of ->f_path.dentry users (and f_dentry macro). Getting that completed will make life much simpler for unionmount/overlayfs, since then we'll be able to limit the places sensitive to file _dentry_ to reasonably few. Which allows to have file_inode(file) pointing to inode in a covered layer, with dentry pointing to (negative) dentry in union one. Still not complete, but much closer now. - crapectomy in lustre (dead code removal, mostly) - "let's make seq_printf return nothing" preparations - assorted cleanups and fixes There _definitely_ will be more piles" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) copy_from_iter_nocache() new helper: iov_iter_kvec() csum_and_copy_..._iter() iov_iter.c: handle ITER_KVEC directly iov_iter.c: convert copy_to_iter() to iterate_and_advance iov_iter.c: convert copy_from_iter() to iterate_and_advance iov_iter.c: get rid of bvec_copy_page_{to,from}_iter() iov_iter.c: convert iov_iter_zero() to iterate_and_advance iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds iov_iter.c: convert iov_iter_npages() to iterate_all_kinds iov_iter.c: iterate_and_advance iov_iter.c: macros for iterating over iov_iter kill f_dentry macro dcache: fix kmemcheck warning in switch_names new helper: audit_file() nfsd_vfs_write(): use file_inode() ncpfs: use file_inode() kill f_dentry uses lockd: get rid of ->f_path.dentry->d_sb ...
2014-12-11ACPI / Fan: Use bus id as the name for non PNP0C0B (Fan) devicesSrinivas Pandruvada
The _ART (Active Cooling Relationship Table), specifies relationship among heat generating sources to a target active cooling device like fan. The _ART table refers to actual bus id name for specifying relationship. Naming "Fan" is not enough as name in the _ART table can change on every platform, to establish relationship for user space thermal controllers. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-11intel_pstate: Add a few commentsKristen Carlson Accardi
Add a few comments in the code which calculates busyness to clarify parts of the algorithm. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-11intel_pstate: add kernel parameter to force loadingEthan Zhao
To force loading on Oracle Sun X86 servers, provide one kernel command line parameter intel_pstate = force For those who are aware of the risk of no power capping capabily working and try to get better performance with this driver. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Tested-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: Linda Knippers <linda.knippers@hp.com> Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-11md: Check MD_RECOVERY_RUNNING as well as ->sync_thread.NeilBrown
A recent change to md started the ->sync_thread from a asynchronously from a work_queue rather than synchronously. This means that there can be a small window between the time when MD_RECOVERY_RUNNING is set and when ->sync_thread is set. So code that checks ->sync_thread might now conclude that the thread has not been started and (because a lock is held) will not be started. That is no longer the case. Most of those places are best fixed by testing MD_RECOVERY_RUNNING as well. To make this completely reliable, we wake_up(&resync_wait) after clearing that flag as well as after clearing ->sync_thread. Other places are better served by flushing the relevant workqueue to ensure that that if the sync thread was starting, it has now started. This is particularly best if we are about to stop the sync thread. Fixes: ac05f256691fe427a3e84c19261adb0b67dd73c0 Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-10Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS update from Ingo Molnar: "The biggest change in this cycle is better support for UCNA (UnCorrected No Action) events: "Handle all uncorrected error reports in the same way (soft offline the page). We used to only do that for SRAO (software recoverable action optional) machine checks, but it makes sense to also do it for UCNA (UnCorrected No Action) logs found by CMCI or polling." plus various x86 MCE handling updates and fixes" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Spell "panicked" correctly x86, mce: Support memory error recovery for both UCNA and Deferred error in machine_check_poll x86, mce, severity: Extend the the mce_severity mechanism to handle UCNA/DEFERRED error x86, MCE, AMD: Assign interrupt handler only when bank supports it x86, MCE, AMD: Drop software-defined bank in error thresholding x86, MCE, AMD: Move invariant code out from loop body x86, MCE, AMD: Correct thresholding error logging x86, MCE, AMD: Use macros to compute bank MSRs RAS, HWPOISON: Fix wrong error recovery status GHES: Make ghes_estatus_caches static APEI, GHES: Cleanup unnecessary function for lockless list
2014-12-10Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm tree changes from Ingo Molnar: "The biggest change is full PAT support from Jürgen Gross: The x86 architecture offers via the PAT (Page Attribute Table) a way to specify different caching modes in page table entries. The PAT MSR contains 8 entries each specifying one of 6 possible cache modes. A pte references one of those entries via 3 bits: _PAGE_PAT, _PAGE_PWT and _PAGE_PCD. The Linux kernel currently supports only 4 different cache modes. The PAT MSR is set up in a way that the setting of _PAGE_PAT in a pte doesn't matter: the top 4 entries in the PAT MSR are the same as the 4 lower entries. This results in the kernel not supporting e.g. write-through mode. Especially this cache mode would speed up drivers of video cards which now have to use uncached accesses. OTOH some old processors (Pentium) don't support PAT correctly and the Xen hypervisor has been using a different PAT MSR configuration for some time now and can't change that as this setting is part of the ABI. This patch set abstracts the cache mode from the pte and introduces tables to translate between cache mode and pte bits (the default cache mode "write back" is hard-wired to PAT entry 0). The tables are statically initialized with values being compatible to old processors and current usage. As soon as the PAT MSR is changed (or - in case of Xen - is read at boot time) the tables are changed accordingly. Requests of mappings with special cache modes are always possible now, in case they are not supported there will be a fallback to a compatible but slower mode. Summing it up, this patch set adds the following features: - capability to support WT and WP cache modes on processors with full PAT support - processors with no or uncorrect PAT support are still working as today, even if WT or WP cache mode are selected by drivers for some pages - reduction of Xen special handling regarding cache mode Another change is a boot speedup on ridiculously large RAM systems, plus other smaller fixes" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86: mm: Move PAT only functions to mm/pat.c xen: Support Xen pv-domains using PAT x86: Enable PAT to use cache mode translation tables x86: Respect PAT bit when copying pte values between large and normal pages x86: Support PAT bit in pagetable dump for lower levels x86: Clean up pgtable_types.h x86: Use new cache mode type in memtype related functions x86: Use new cache mode type in mm/ioremap.c x86: Use new cache mode type in setting page attributes x86: Remove looking for setting of _PAGE_PAT_LARGE in pageattr.c x86: Use new cache mode type in track_pfn_remap() and track_pfn_insert() x86: Use new cache mode type in mm/iomap_32.c x86: Use new cache mode type in asm/pgtable.h x86: Use new cache mode type in arch/x86/mm/init_64.c x86: Use new cache mode type in arch/x86/pci x86: Use new cache mode type in drivers/video/fbdev/vermilion x86: Use new cache mode type in drivers/video/fbdev/gbefb.c x86: Use new cache mode type in include/asm/fb.h x86: Make page cache mode a real type x86: mm: Use 2GB memory block size on large-memory x86-64 systems ...
2014-12-10PM / OPP: do error handling at the bottom of dev_pm_opp_add_dynamic()Viresh Kumar
This makes it less error prone and moves common resource deallocation at a single place. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10PM / OPP: handle allocation of device_opp in a separate routineViresh Kumar
Get the 'device_opp' allocation code into a separate routine to keep only the necessary part in dev_pm_opp_add_dynamic(). Also do s/sizeof(struct device_opp)/sizeof(*dev_opp) and remove the print message on kzalloc() failure as checkpatch warns for that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10PM / OPP: reuse find_device_opp() instead of duplicating codeViresh Kumar
Reuse find_device_opp() in opp_set_availability() instead of duplicating code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10PM / OPP: Staticize __dev_pm_opp_remove()Viresh Kumar
Its a local routine and need not be accessible outside of opp.c. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-10PM / OPP: replace kfree with kfree_rcu while freeing 'struct device_opp'Viresh Kumar
Somehow one of the instance of freeing resources failed to use kfree_rcu() and used kfree() instead. This might cause problems as the node might be referenced by readers under rcu locks and we must wait for the rcu grace period as well. While we are at it, also update comment over 'struct device_opp' to mention why we are waiting for both rcu and srcu grace periods. Fixes: 129eec55df6a (PM / OPP Introduce APIs to remove OPPs) Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>