summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-11-08x86 platform drivers: add POWER_SUPPLY to selected drivers for DellLinus Torvalds
The Kconfig loop detection goes crazy without this. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-08x86 platform drivers: make Dell laptop driver select needed LED supportLinus Torvalds
Otherwise we get compile errors like this: ERROR: "led_classdev_unregister" [drivers/platform/x86/dell-laptop.ko] undefined! ERROR: "led_classdev_register" [drivers/platform/x86/dell-laptop.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 when the dell-laptop support is enabled without the necessary LED support being enabled. Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-08wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids ↵Eyal Shapira
are in filters A minor fix for the check that verifies that all given SSIDs (in req) exist in the filters (the match sets) Signed-off-by: Eyal Shapira <eyal@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08ath: Fix NULL ptr dereference in ath_reg_apply_world_flagsHelmut Schaa
This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth
2011-11-08drivers/media: video/a5k6aa is a module and so needs module.hPaul Gortmaker
This file uses core functions like module_init() and module_exit() and so it explicitly needs to include the module.h header. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-08Merge branch 'for_3.2/gpio-cleanup' of ↵Grant Likely
git://gitorious.org/khilman/linux-omap-pm into gpio/merge
2011-11-08sunhme: Allow usage on SBI based SBus systemsoftedal
To prevent the SBus driver for Sun Happy Meal cards from being loaded for PCI cards utilizing the same chipset, a filter was added to the probe function in commit 0b492fce3d72d982a7981905f85484a1e1ba7fde. The filter was implemented by checking the name of the parent node in the OF tree. This patch extends this filter, so that the driver will load on SBus systems that are based upon SBI SBus Bridges. Signed-off-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08ARM: 7149/1: spi/pl022: Enable clock in probeUlf Hansson
Make sure we enable the clock before leaving probe. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-08n_gsm: Fix timingsAlan Cox
Alek Du reported that the code erroneously applies time to jiffies conversions twice to the t1 and t2 values. In normal use on a modem link this cases no visible problem but on a slower link it will break as with HZ=1000 as is typical we are running t1/t2 ten times too fast. Alek's original patch removed the conversion from the timer setting but we in fact have to be more careful as the contents of t1/t2 are visible via the device API and we thus need to correct the constants. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-08Fix incorrect usage of NET_IP_ALIGNNico Erfurth
The driver used NET_IP_ALIGN to remove some additional padding inside of the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2 which removed the correct amount of bytes. On MCORE2-machines commit ea812ca1b06113597adcd8e70c0f84a413d97544 introduces a change which sets NET_IP_ALIGN to 0 by default. Which triggered the bug on these machines. This fix introduces a new RXW_PADDING define and uses this instead of NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which is provided by SMSC. Signed-off-by: Nico Erfurth <ne@erfurth.eu> Tested-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08r8169: increase the delay parameter of pm_schedule_suspendhayeswang
The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds from link down to link up. If the delay of pm_schedule_suspend is not long enough, the device would enter runtime_suspend before link up. After link up, the device would wake up and reset PHY again. Then, you would find the driver keep in a loop of runtime_suspend and rumtime_resume. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08iommu: omap: Fix compile failureMing Lei
Fix compile failure in drivers/iommu/omap-iommu-debug.c because of missing module.h include. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-11-08Bluetooth: Add support for Broadcom BCM20702A0Wen-chien Jesse Sung
Since this device declares itself as vendor specific, must add a new entry to device ID table to support it. usb-device output of this device: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AA9C9F1 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-08[media] v4l2-ctrl: Send change events to all fh for auto cluster slave controlsHans de Goede
Otherwise the fh changing the master control won't get the inactive state change event for the slave controls. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08[media] v4l2-event: Don't set sev->fh to NULL on unsubscribeHans de Goede
Setting sev->fh to NULL causes problems for the del op added in the next patch of this series, since this op needs a way to get to its own data structures, and typically this will be done by using container_of on an embedded v4l2_fh struct. The reason the original code is setting sev->fh to NULL is to signal to users of the event framework that the unsubscription has happened, but since their is no shared lock between the event framework and users of it, this is inherently racy, and it also turns out to be unnecessary as long as both the event framework and the user of the framework do their own locking properly and the user guarantees that it holds no references to the subcribed_event structure after its del operation has been called. This is best explained by looking at the only code currently checking for sev->fh being set to NULL on unsubscribe, which is the v4l2-ctrls.c send_event function. Here is the relevant code from v4l2-ctrls: send_event(): if (sev->fh && (sev->fh != fh || (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))) v4l2_event_queue_fh(sev->fh, &ev); Now lets say that v4l2_event_unsubscribe and v4l2-ctrls: send_event() race on the same sev, then the following could happens: 1) send_event checks sev->fh, finds it is not NULL <thread switch> 2) v4l2_event_unsubscribe sets sev->fh NULL 3) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks as the thread calling send_event holds the ctrl_lock <thread switch> 4) send_event calls v4l2_event_queue_fh(sev->fh, &ev) which not is equivalent to calling: v4l2_event_queue_fh(NULL, &ev) 5) oops, NULL pointer deref. Now again without setting sev->fh to NULL in v4l2_event_unsubscribe and without the (now senseless since always true) sev->fh != NULL check in 1) send_event is about to call v4l2_event_queue_fh(sev->fh, &ev) <thread switch> 2) v4l2_event_unsubscribe removes sev->list from the fh->subscribed list <thread switch> 3) send_event calls v4l2_event_queue_fh(sev->fh, &ev) 4) v4l2_event_queue_fh blocks on the fh_lock spinlock <thread switch> 5) v4l2_event_unsubscribe unlocks the fh_lock spinlock 6) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks as the thread calling send_event holds the ctrl_lock <thread switch> 8) v4l2_event_queue_fh takes the fh_lock 7) v4l2_event_queue_fh calls v4l2_event_subscribed, does not find it since sev->list has been removed from fh->subscribed already -> does nothing 9) v4l2_event_queue_fh releases the fh_lock 10) the caller of send_event releases the ctrl lock (mutex) <thread switch> 11) v4l2_ctrls del_event takes the ctrl lock 12) v4l2_ctrls del_event removes sev->node from the ev_subs list 13) v4l2_ctrls del_event releases the ctrl lock 14) v4l2_event_unsubscribe frees the sev, to which no references are being held anymore Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08[media] v4l2-event: Remove pending events from fh event queue when unsubscribingHans de Goede
The kev pointers inside the pending events queue (the available queue) of the fh point to data inside the sev, unsubscribing frees the sev, thus making these pointers point to freed memory! This patch fixes these dangling pointers in the available queue by removing all matching pending events on unsubscription. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08[media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALLHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08[media] v4l: s5p-mfc: fix reported capabilitiesKamil Debski
MFC uses the multi-plane API, but it reported single-plane when querying capabilities. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08[media] media: vb2: reset queued list on REQBUFS(0) callMarek Szyprowski
Queued list was not reset on REQBUFS(0) call. This caused to enqueue a freed buffer to the driver. Reported-by: Angela Wan <angela.j.wan@gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08[media] media: vb2: set buffer length correctly for all buffer typesMarek Szyprowski
v4l2_planes[plane].length field was not initialized for userptr buffers. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08[media] media: vb2: add a check for uninitialized bufferMarek Szyprowski
__buffer_in_use() might be called for empty/uninitialized buffer in the following scenario: REQBUF(n, USER_PTR), QUERYBUF(). This patch fixes kernel ops in such case. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08drm/i915: Fix object refcount leak on mmappable size limit error path.Eric Anholt
I've been seeing memory leaks on my system in the form of large (300-400MB) GEM objects created by now-dead processes laying around clogging up memory. I usually notice when it gets to about 1.2GB of them. Hopefully this clears up the issue, but I just found this bug by inspection. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-08agp: iommu_gfx_mapped only available if CONFIG_INTEL_IOMMU is setKeith Packard
Kernels with no iommu support cannot ever need the Ironlake work-around, so never enable it in that case. Might be better to completely remove the work-around from the kernel in this case? Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
2011-11-08drm/i915: fix if statement (bogus semi-colon)Dan Carpenter
The semi-colon is a typo here and it makes the if statement unconditional. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-08hwspinlock/u8500: fix build error due to undefined labelAxel Lin
Fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe': drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-11-08md/raid5: STRIPE_ACTIVE has lock semantics, add barriersDan Williams
All updates that occur under STRIPE_ACTIVE should be globally visible when STRIPE_ACTIVE clears. test_and_set_bit() implies a barrier, but clear_bit() does not. This is suitable for 3.1-stable. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2011-11-08md/raid5: abort any pending parity operations when array fails.NeilBrown
When the number of failed devices exceeds the allowed number we must abort any active parity operations (checks or updates) as they are no longer meaningful, and can lead to a BUG_ON in handle_parity_checks6. This bug was introduce by commit 6c0069c0ae9659e3a91b68eaed06a5c6c37f45c8 in 2.6.29. Reported-by: Manish Katiyar <mkatiyar@gmail.com> Tested-by: Manish Katiyar <mkatiyar@gmail.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2011-11-08powerpc/ps3: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-07drm/i915: Turn on another required clock gating bit on gen6.Eric Anholt
Unlike the previous one, I don't have known testcases it fixes. I'd rather not go through the same debug cycle on whatever testcases those might be. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-07drm/i915: Turn on a required 3D clock gating bit on Sandybridge.Eric Anholt
Fixes rendering failures in Unigine Tropics and Sanctuary and the mesa "fire" demo. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-07mfd: fix build failures in recently added ab5500 codePaul Gortmaker
These files had implicit dependencies on modular support which now show up as build failures with the module cleanup work merged to mainline. Reported-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-07hwspinlock/u8500: include linux/module.hAxel Lin
Include module.h to fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function) [...] drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1 make[1]: *** [drivers/hwspinlock] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-07MTD: MAPS: bcm963xx-flash.c: explicitly include module.hJonas Gorski
module.h was previously implicitly included through mtd/mtd.h. Fixes the following build failure after the module.h cleanup: CC drivers/mtd/maps/bcm963xx-flash.o drivers/mtd/maps/bcm963xx-flash.c: In function 'bcm963xx_probe': drivers/mtd/maps/bcm963xx-flash.c:208:29: error: 'THIS_MODULE' undeclared (first use in this function) [...] drivers/mtd/maps/bcm963xx-flash.c:276:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mtd/maps/bcm963xx-flash.c:276:15: warning: function declaration isn't a prototype make[7]: *** [drivers/mtd/maps/bcm963xx-flash.o] Error 1 Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
2011-11-07forcedeth: fix a few sparse warnings (variable shadowing)david decotigny
This fixes the following sparse warnings: drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Improve stats countersMandeep Baines
Rx byte count was off; instead use the hardware's count. Tx packet count was counting pre-TSO packets; instead count on-the-wire packets. Report hardware dropped frame count as rx_fifo_errors. - The count of transmitted packets reported by the forcedeth driver reports pre-TSO (TCP Segmentation Offload) packet counts and not the count of the number of packets sent on the wire. This change fixes the forcedeth driver to report the correct count. Fixed the code by copying the count stored in the NIC H/W to the value reported by the driver. - Count rx_drop_frame errors as rx_fifo_errors: We see a lot of rx_drop_frame errors if we disable the rx bottom-halves for too long. Normally, rx_fifo_errors would be counted in this case. The rx_drop_frame error count is private to forcedeth and is not reported by ifconfig or sysfs. The rx_fifo_errors count is currently unused in the forcedeth driver. It is reported by ifconfig as overruns. This change reports rx_drop_frame errors as rx_fifo_errors. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: remove unneeded stats updatesdavid decotigny
Function ndo_get_stats() updates most of the stats from hardware registers, making the manual updates un-needed. This change removes these manual updates. Main exception is rx_missed_errors which needs manual update. Another exception is rx_packets, still updated manually in this commit to make sure this patch doesn't change behavior of driver. This will be addressed by a future patch. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Acknowledge only interrupts that are being processedMike Ditto
This is to avoid a race, accidentally acknowledging an interrupt that we didn't notice and won't immediately process. This is based solely on code inspection; it is not known if there was an actual bug here. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: fix race when unloading moduledavid decotigny
When forcedeth module is unloaded, there exists a path that can lead to mod_timer() after del_timer_sync(), causing an oops. This patch short-circuits this unneeded path, which originates in nv_get_ethtool_stats(). Tested: x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic + rmmod/modprobe/ifconfig in a loop Initial-Author: Salman Qazi <sqazi@google.com> Discussion: http://patchwork.ozlabs.org/patch/123548/ Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07device-mapper: using EXPORT_SYBOL in dm-space-map-checker.c needs export.hStephen Rothwell
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07device-mapper: dm-bufio.c needs to include module.hStephen Rothwell
since it uses the module facilities. Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07drivers/md: change module.h -> export.h in persistent-data/dm-*Paul Gortmaker
For the files which are not themselves modular, we can change them to include only the smaller export.h since all they are doing is looking for EXPORT_SYMBOL. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07usbnet: fix oops in usbnet_start_xmitKonstantin Khlebnikov
This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491e SKB can be NULL at this point, at least for cdc-ncm. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07ixgbe: Fix compile for kernel without CONFIG_PCI_IOV definedRose, Gregory V
Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not defined. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07net, wireless, mwifiex: Fix mem leak in mwifiex_update_curr_bss_params()Jesper Juhl
If kmemdup() fails we leak the memory allocated to bss_desc. This patch fixes the leak. I also removed the pointless default assignment of 'NULL' to 'bss_desc' while I was there anyway. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07brcm80211: smac: eliminate a null pointer dereference in dma.cArend van Spriel
Though it's unlikely, di may be null, so we can't dereference di->dma.dmactrlflags until we've checked it. Move this de-reference after the check, and adjust the error message to not require de-referencing di. This is based upon Julia's original patch: <1319846297-2985-2-git-send-email-julia@diku.dk> Reported-by: Julia Lawall <julia@diku.dk> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07b43: HT-PHY: report signal to mac80211Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07b43: fill ctl1 word on all newer PHYs, fix PHY errorsRafał Miłecki
This fixes PHY transmission errors reported on some LP-PHY and HT-PHY cards. For LP-PHY they were quite rare and not really noticable. On HT-PHY they were critical, OFDM rates were not available at all. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: cpuidle: Single/Global registration of idle states cpuidle: Split cpuidle_state structure and move per-cpu statistics fields cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare() cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning ACPI: Export FADT pm_profile integer value to userspace thermal: Prevent polling from happening during system suspend ACPI: Drop ACPI_NO_HARDWARE_INIT ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() PNPACPI: Simplify disabled resource registration ACPI: Fix possible recursive locking in hwregs.c ACPI: use kstrdup() mrst pmu: update comment tools/power turbostat: less verbose debugging
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 13:35:44 +0000