summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2009-03-16mwl8k: Marvell TOPDOG wireless driverLennert Buytenhek
Add a driver for Marvell 88w8xxx TOPDOG PCI/PCIe wireless parts. This initial version supports the 88w8687 802.11b/g PCIe part on channels 1-11, and only STA mode is currently implemented. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Fix FIF_PROMISC_IN_BSS processing in station modeJouni Malinen
We must not disable ACK sending in this case since it would break normal station operations. In addition, clarify the comment about AP mode to make more sense. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Add spectrum management to HW capabilitiesSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: make few eeprom and calib items staticLuis R. Rodriguez
This fixes the sparse complaints: drivers/net/wireless/ath9k/eeprom.c:1407:5: warning: symbol 'ath9k_hw_4k_get_spur_channel' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1436:19: warning: symbol 'eep_4k_ops' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2808:5: warning: symbol 'ath9k_hw_def_get_spur_channel' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2837:19: warning: symbol 'eep_def_ops' was not declared. Should it be static? CC [M] drivers/net/wireless/ath9k/eeprom.o CHECK drivers/net/wireless/ath9k/mac.c CC [M] drivers/net/wireless/ath9k/mac.o CHECK drivers/net/wireless/ath9k/calib.c drivers/net/wireless/ath9k/calib.c:883:6: warning: symbol 'ar9285_clc' was not declared. Should it be static? Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: downgrade xmit queue full message to xmit debugLuis R. Rodriguez
This is not a fatal message, hitting it simply means we're going to tell the upper layers to slow their horses down but as we make more descriptors available we let the show continue by waking up the queues in ath_wake_mac80211_queue(). We downgrade this as otherwise we fill up your kernel log with messages which can be common under heavy traffic. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16mac80211_hwsim: add regulatory testing optionsLuis R. Rodriguez
This adds a module parameter for mac80211_hwsim regulatory testing. This module parameter is designed specifically to help test the different possible types of driver specific regulatory requests and also helps to test world roaming, all without any hardware. If you want to just simply test different alpha2s just use the userspace regulatory request as this won't buy you anything new. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16cfg80211: move enum reg_set_by to nl80211.hLuis R. Rodriguez
We do this so we can later inform userspace who set the regulatory domain and provide details of the request. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16cfg80211: remove REGDOM_SET_BY_INITLuis R. Rodriguez
This is not used as we can always just assume the first regulatory domain set will _always_ be a static regulatory domain. REGDOM_SET_BY_CORE will be the first request from cfg80211 for a regdomain and that then populates the first regulatory request. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16atmel: checkpatch.pl cleanupsJohn Daiker
Before: 881 errors, 265 warnings, 4507 lines checked After: 114 errors, 273 warnings, 4548 lines checked This was mostly "space required after that ',' (ctx:VxV)". Also a fair number of whitespace, code indent, and C99 comment cleanups. New warnings introduced are all "line over 80 character" md5sums are identical, as I skipped any fixes which may have altered the resulting binary. Signed-off-by: John Daiker <daikerjohn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Fix bug in reading debugfs file 'rcstat'Sujith
The rate table would not have been chosen before the interface has been brought up. Reading 'rcstat' in this case would result in an oops, fix this. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Fix bug in TX aggregationSujith
mac80211 expects the driver to fill in the starting sequence number of an ADDBA request to initiate TX aggregation. IEEE80211_TX_CTL_AMPDU would be set for frames only after a successful ADDBA exchange, but we have to increment the internal sequence counter for the normal(non-AMPDU) data frames proerly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Initialize ANI properlySujith
ANI was not being initialized correctly for all HW variants. This patch fixes it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: update LED table with reported devicesBob Copeland
This patch adds support for Acer Ferrari 5000, and also specifies the subsystem device ids for previously reported e-machines e510 and Acer Aspire One A150. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: use a table for LED parametersBob Copeland
Put the device id-to-gpio mapping in a table to make it easier to add new devices. The list of supported devices is unchanged. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: extract LED code into a separate fileBob Copeland
Move LED code out of base.c for clarity. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: don't change mac in eeprom_read_mac on errorJiri Slaby
Do not touch mac parameter passed to ath5k_eeprom_read_mac unless we are sure we have correct address. I.e. when returning error, do not change it. While at it, use '= {}' compiler trick for memsetting mac_d. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: constify stuffJiri Slaby
Make some structures const to place them in .rodata, since we won't change them. Most important parts of objdump -h: - 0 .text 00011170 + 0 .text 00011140 - 5 .rodata 0000828e + 5 .rodata 0000895e - 13 .data 00000560 + 13 .data 00000110 - 14 .devinit.data 00000260 Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16iwlwifi: correct device name for 1000 seriesJay Sternberg
device name was changed from 100 to 1000 Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16iwl3945: add test for new associationAbhijeet Kolekar
Add check for new association to ease reading. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: completely ignore rx'd frames with bad FCSChristian Lamparter
Passing frames with a bad FCS to the user is an optional feature. However it doesn't work reliable and strangely not in the native monitor mode?! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16airo_cs: checkpatch.pl cleanupsJohn Daiker
Hopefully nothing controversial here, since the driver hasn't been touched in a while! Before: 36 errors, 6 warnings, 482 lines checked After: 0 errors, 3 warnings, 485 lines checked This was nearly all trailing whitespace, * and parenthesis spacing, and code indent changes. md5sum of object file before and after are identical. Signed-off-by: John Daiker <daikerjohn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Use suitable macros with 4k eeprom dataVasanthakumar Thiagarajan
This patch improves range and connection stability in AR9285. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ipw2x00: remove obsolete enumsHelmut Schaa
Remove obsolete enums from ipw2x00/ieee80211.h, they are not used anymore. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ipw2x00: Use IE definitions from linux/ieee80211.hHelmut Schaa
Use IE definitions from linux/ieee80211.h and drop the appropriate enum from ipw2x00/ieee80211.h Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ipw2x00: remove duplicated definesHelmut Schaa
Remove several duplicated defines from ipw2x00/ieee80211.h which are also available in linux/ieee80211.h. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16libipw: fix debug outputHelmut Schaa
Replace all remaining occurrences of CONFIG_IEEE80211_DEBUG with CONFIG_LIBIPW_DEBUG in libipw to allow debug output again. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: always compile ath_radio_{en,dis}ableGabor Juhos
ath_radio_{en,dis}able is only compiled if RFKILL is enabled, but it is required by the 'ath9k_wiphy_select' function. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: fix compile error in debug.cGabor Juhos
drivers/net/wireless/ath9k/debug.c: In function 'read_file_wiphy': drivers/net/wireless/ath9k/debug.c:377: error: implicit declaration of function 'put_unaligned_le32' drivers/net/wireless/ath9k/debug.c:378: error: implicit declaration of function 'put_unaligned_le16' Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: fix compile error in ahb.cGabor Juhos
drivers/net/wireless/ath9k/ahb.c: In function 'ath_ahb_probe': drivers/net/wireless/ath9k/ahb.c:136: error: 'aphy' undeclared (first use in this function) Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: fix AR_SREV_9100_OR_LATER macroGabor Juhos
The current macro is wrong, because detects some AR5416 devices as an AR9100 device. The AR5416 devices would have performance issues after this change, because the contents of the ar5416 specific and of the ar9100 specificinitval arrays are swapped. Fortunately we can correct this with the rename of the arrays simply. Changes-licesed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: move ar9100 version checking macros into a more appropriate placeGabor Juhos
All other version checking macros are in a common location within the reg.h file. The AR_SREV_9100_OR_LATER macro is wrong currently, but will be fixed with the next patch. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: cleanup AR5416 version checking macrosGabor Juhos
Currently we have two different versions of this macros. Because they would have to do the same thing, we should simplify and merge them. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Incorrect AR9285 version check macroSenthil Balasubramanian
Fix AR9285 1.1 and 1.2 version check macro. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: INI update for AR9285 and periodic PA offset caliberationSenthil Balasubramanian
This patch updates the initvalues for AR9285 chipset and also adds periodic PA offset caliberation. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: RX buffers may be accessed/freed even before initialized/alloced.Senthil Balasubramanian
accessing RXBUF list in ath_rx_cleanup may cause panic if ath_descdma_setup fails even before RXBUF list is initialized. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: Get rid of unnecessary ATOMIC memory alloc during init timeSenthil Balasubramanian
We can sleep for memory during init time and so allocating rx buffers, descriptro buffers with GFP_KERNEL should help us to get rid of transient alloc fails. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16mac80211_hwsim: add support for 5 GHzLuis R. Rodriguez
ACME Inc. is now selling a dual band radio. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: enable power save supportChristian Lamparter
This patch enables power save support on all p54 devices. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: initial SoftLED supportChristian Lamparter
This patch adds SoftLED support for all p54 devices. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: fix iwconfig txpower offChristian Lamparter
Disabling the receiver logic with P54_FILTER_TYPE_RX_DISABLED is not supported by all firmwares. However we have an alternative: hibernation. And the only side effect - so far - is a bit less power consumption. WIN! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54pci: convert printk(KERN_* to dev_*Christian Lamparter
This patch replaces most printk(KERN_* "") with their by dev_* analogue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54: unify ieee80211 device registrationChristian Lamparter
All three drivers (p54pci, p54usb and p54spi) are implementing the same functionality three times. So, why not put it into the shared library?! Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16p54usb: stop USB core interference in exit pathChristian Lamparter
The patch fixes a problem when the (Soft)LED stayed on after the module was unloaded. It turned out that the USB core disables all endpoints before calling the disconnect method. So it was impossible to switch off the radio & LEDs. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath9k: create a common debugfs_root for all device instancesGabor Juhos
The driver are trying to create an 'ath9k' directory in debugfs for each device currently. If there are more than one device in the system, the second try will always fail. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16orinoco: firmware: consistently compile out fw cache support if not requestedAndrey Borzenkov
Currently part of support for FW caching is unconditionally compiled in even if it is never used. Consistently remove caching support if not requested by user. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-14netxen: update version to 4.0.30Dhananjay Phadke
To mark all features and bugfixes submitted since 4.0.11. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14netxen: add receive side scaling (rss) supportDhananjay Phadke
This patch enables the load balancing capability of firmware and hardware to spray traffic into different cpus through separate rx msix interrupts. The feature is being enabled for NX3031, NX2031 (old) will be enabled later. This depends on msi-x and compatibility with msi and legacy is maintained by enabling single rx ring. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14netxen: remove old lro codeDhananjay Phadke
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14netxen: sanitize variable namesDhananjay Phadke
o remove max_ prefix from ring sizes, since they don't really represent max possible sizes. o cleanup naming of rx ring types (normal, jumbo, lro). o simplify logic to choose rx ring size, gig ports get half rx ring of 10 gig ports. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-14netxen: add suspend resume supportDhananjay Phadke
Detach network interface on PCI suspend and recreate hardware context after resumes. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-27 08:36:23 +0000