summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2008-04-18MMC: OMAP: General cleanup for MMC multislot supportJuha Yrjola
General code cleanup, modifications at some dev_* functions and other hacks at mmc_omap_irq() for MMC multislot support. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18MMC: OMAP: Power functions modified to MMC multislot supportJuha Yrjola
Modifications at power functions to MMC multislot support. This patch also move board-specific code out of MMC OMAP driver. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18MMC: OMAP: Fix timeout calculation for MMC multislot supportJuha Yrjola
Fix the data timeout calculation for MMC multislot support. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18MMC: OMAP: New release dma and abort xfer functionsJuha Yrjola
New functions to support MMC multislot: mmc_omap_release_dma() and mmc_omap_abort_xfer(). Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18MMC: OMAP: Add back cover switch supportJuha Yrjola
This patch adds back MMC cover switch support in a way that supports multiple slots. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18MMC: OMAP: Introduce new multislot structure and change driver to use itJuha Yrjola
Introduce new MMC multislot structure and change driver to use it. Note that MMC clocking is now enabled in mmc_omap_select_slot() and disabled in mmc_omap_release_slot(). Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18MMC: OMAP: Remove cover switch handling to allow adding multislot supportTony Lindgren
This patch removes the MMC cover switch handling temporarily to make following multislot patches cleaner. MMC cover switch handling will be added back in later patches after adding basic multislot support. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18MMC: OMAP: Fix the BYTEBLOCK capability removalFrancisco Alecrim
According with commit 255d01af9a990fd5166f04ed0cc0b30b7b67e81e from Linux-OMAP tree, the BYTEBLOCK capability was removed by Pierre Ossman. MMC_CAP_BYTEBLOCK is not defined causing the compile error: drivers/mmc/host/omap.c: In function `mmc_omap_probe': drivers/mmc/host/omap.c:1077: error: `MMC_CAP_BYTEBLOCK' undeclared (first use in this function) drivers/mmc/host/omap.c:1077: error: (Each undeclared identifier is reported only once drivers/mmc/host/omap.c:1077: error: for each function it appears in.) Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18MMC: OMAP: Remove extra divisor increaseTony Lindgren
As noted by Kyungmin Park, the divisor calculation has an unnecessary increase. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18MMC: OMAP: Remove some opcodes from host driverCarlos Eduardo Aguiar
This patch removes some opcodes from host driver so there's no need on putting '#include <linux/mmc/mmc.h>', that should not be needed in host drivers. Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18mmc: use shorter, equivalent set_current_state()Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18sdhci: allow led to be controlled freelyPierre Ossman
Hook up the controller LED to the LED subsystem, allowing more flexible control than simply indicating an ongoing request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18sdhci: remove custom controller namePierre Ossman
Remove the use of the sdhci specific device name and use the mmc controller name instead. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18mmc: set controller name earlyPierre Ossman
Reorganise code so that mmc_hostname() works directly after allocation. That way host drivers can use that name for resource allocations and messages during probing. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (58 commits) ide: remove ide_init_default_irq() macro ide: move default IDE ports setup to ide_generic host driver ide: remove obsoleted "idex=noprobe" kernel parameter (take 2) ide: remove needless hwif->irq check from ide_hwif_configure() ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers ide: limit legacy VLB host drivers to alpha, x86 and mips cmd640: init hwif->{io_ports,irq} explicitly cmd640: cleanup setup_device_ptrs() ide: add ide-4drives host driver (take 3) ide: remove ppc ifdef from init_ide_data() ide: remove ide_default_io_ctl() macro ide: remove CONFIG_IDE_ARCH_OBSOLETE_INIT ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2) ppc/pmac: remove no longer needed IDE quirk ppc: don't include <linux/ide.h> ppc: remove ppc_ide_md ppc/pplus: remove ppc_ide_md.ide_init_hwif hook ppc/sandpoint: remove ppc_ide_md hooks ppc/lopec: remove ppc_ide_md hooks ppc/mpc8xx: remove ppc_ide_md hooks ...
2008-04-18Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: ack to flags: make use of the unused bits in the 'ack' field iop-adma: remove the workaround for missed interrupts on iop3xx async_tx: kill ->device_dependency_added async_tx: fix multiple dependency submission fsldma: Split the MPC83xx event from MPC85xx and refine irq codes. fsldma: Remove CONFIG_FSL_DMA_SELFTEST, keep fsl_dma_self_test() running always.
2008-04-18Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (79 commits) ata-acpi: don't call _GTF for disabled drive sata_mv add temporary 3 second init delay for SiliconImage PMs sata_mv remove redundant edma init code sata_mv add basic port multiplier support sata_mv fix SOC flags, enable NCQ on SOC sata_mv disable hotplug for now sata_mv cosmetics sata_mv hardreset rework [libata] improve Kconfig help text for new PMP, SFF options libata: make EH fail gracefully if no reset method is available libata: Be a bit more slack about early devices libata: cable logic libata: move link onlineness check out of softreset methods libata: kill dead code paths in reset path pata_scc: fix build breakage libata: make PMP support optional libata: implement PMP helpers libata: separate PMP support code from core code libata: make SFF support optional libata: don't use ap->ioaddr in non-SFF drivers ...
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdb: kgdb: always use icache flush for sw breakpoints kgdb: fix SMP NMI kgdb_handle_exception exit race kgdb: documentation fixes kgdb: allow static kgdbts boot configuration kgdb: add documentation kgdb: Kconfig fix kgdb: add kgdb internal test suite kgdb: fix several kgdb regressions kgdb: kgdboc pl011 I/O module kgdb: fix optional arch functions and probe_kernel_* kgdb: add x86 HW breakpoints kgdb: print breakpoint removed on exception kgdb: clocksource watchdog kgdb: fix NMI hangs kgdb: fix kgdboc dynamic module configuration kgdb: document parameters x86: kgdb support consoles: polling support, kgdboc kgdb: core uaccess: add probe_kernel_write()
2008-04-18Merge branch 'semaphore' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc * 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: Remove DEBUG_SEMAPHORE from Kconfig Improve semaphore documentation Simplify semaphore implementation Add down_timeout and change ACPI to use it Introduce down_killable() Generic semaphore implementation Add semaphore.h to kernel_lock.c Fix quota.h includes
2008-04-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (104 commits) IB/iser: Don't change itt endianness IB/mlx4: Update module version and release date IPoIB: Handle case when P_Key is deleted and re-added at same index IB/iser: Release connection resources on RDMA_CM_EVENT_DEVICE_REMOVAL event IB/mlx4: Fix incorrect comment IB/mlx4: Fix race when detaching a QP from a multicast group IB/ehca: Support all ibv_devinfo values in query_device() and query_port() RDMA/nes: Free IRQ before killing tasklet IB/mthca: Update module version and release date IB/mlx4: Update QP state if query QP succeeds IB/mthca: Update QP state if query QP succeeds RDMA/amso1100: Add check for NULL reply_msg in c2_intr() IB/mlx4: Add support for resizing CQs IB/mlx4: Add support for modifying CQ moderation parameters IPoIB: Support modifying IPoIB CQ event moderation IB/core: Add support for modify CQ IPoIB: Add basic ethtool support mlx4_core: Increase max number of QPs to 128K RDMA/amso1100: Add support for "send with invalidate" work requests IB/core: Add support for "send with invalidate" work requests ...
2008-04-18ide: remove ide_init_default_irq() macroBartlomiej Zolnierkiewicz
* Use ide_default_irq() instead of ide_init_default_irq() in ide_generic host driver (so the correct IRQ is always set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI). * Remove no longer needed ide_init_default_irq() macro. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: move default IDE ports setup to ide_generic host driverBartlomiej Zolnierkiewicz
* Make CONFIG_IDE_GENERIC depended on CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS. * Move default IDE ports setup from init_ide_data() to ide_generic. * Use ide_init_port_hw() in ide_generic. * Remove no longer needed CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove obsoleted "idex=noprobe" kernel parameter (take 2)Bartlomiej Zolnierkiewicz
* Remove obsoleted "idex=noprobe" kernel parameter. * Remove no longer needed hwif->noprobe quirk from ide_hwif_configure() and hwif->noprobe checking from cmd640.c. v2: * "ide?=noprobe" -> "ide?=ata66" in Documentation/kernel-parameters.txt. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove needless hwif->irq check from ide_hwif_configure()Bartlomiej Zolnierkiewicz
ide_init_default_irq() is always zero for CONFIG_PCI=y so hwif->irq check in ide_hwif_configure() can be safely removed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: init hwif->{io_ports,irq} explicitly in legacy VLB host driversBartlomiej Zolnierkiewicz
Do explicit port setup in legacy VLB host drivers instead of depending on init_ide_data(). This way hwif->io_ports[] and hwif->irq are always correctly set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: limit legacy VLB host drivers to alpha, x86 and mipsBartlomiej Zolnierkiewicz
These host drivers indirectly depend on CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=y which is defined only on alpha, x86, ia64, m32r, mips and ppc32. Moreover: - on ia64 there is no ISA - m32r is too new for VLB - on ppc32 ISA is available only on PPC_CHRP (no default IDE ports) and PPC_PREP (marked as BROKEN) [ the common sense tells me that VLB was only used on x86 but there are urban legends that one of these host drivers was needed on some other arch - thus the extra care ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18cmd640: init hwif->{io_ports,irq} explicitlyBartlomiej Zolnierkiewicz
Do explicit port setup instead of depending on init_ide_data(). This way hwif->io_ports[] and hwif->irq are always correctly set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI. While at it fix printk(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18cmd640: cleanup setup_device_ptrs()Bartlomiej Zolnierkiewicz
This loop is no longer needed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: add ide-4drives host driver (take 3)Bartlomiej Zolnierkiewicz
CONFIG_BLK_DEV_4DRIVES deserves its own host driver: * Add drivers/ide/legacy/ide-4drives.c and move "4drives" support there. * Add ide-4drives.o in the link order after all other legacy host drivers enabled by "ide0=" options (they all are mutually exclusive). * Make ide-4drives host driver probe itself for IDE devices instead of indirectly depending on ide_generic host driver. * Add "probe" module parameter to ide-4drives and update documentation. v2: * s/paramater/parameter/ in ide.txt. (Noticed by Randy Dunlap) v3: * s/ide_4drives.probe/ide-4drives.probe/ in help entry. (Noticed by Sergei Shtylyov) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove ppc ifdef from init_ide_data()Bartlomiej Zolnierkiewicz
On PPC32 ide_init_default_irq() is non-zero only for PPLUS and PPC_PREP (the latter marked as BROKEN currently) so this ifdef can be removed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove ide_default_io_ctl() macroBartlomiej Zolnierkiewicz
It is always == '((base) + 0x206)' if CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=y and it is not needed otherwise (arm, blackfin, parisc, ppc64, sh, sparc[64]). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove CONFIG_IDE_ARCH_OBSOLETE_INITBartlomiej Zolnierkiewicz
* Use CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS instead of CONFIG_IDE_ARCH_OBSOLETE_INIT in init_ide_data(). * Remove no longer needed CONFIG_IDE_ARCH_OBSOLETE_INIT. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2)Bartlomiej Zolnierkiewicz
* Add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS to drivers/ide/Kconfig and use it instead of defining IDE_ARCH_OBSOLETE_DEFAULTS in <arch/ide.h>. v2: * Define ide_default_irq() in ide-probe.c/ns87415.c if not already defined and drop defining ide_default_irq() for CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=n. [ Thanks to Stephen Rothwell and David Miller for noticing the problem. ] Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David Miller <davem@davemloft.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc: remove ppc_ide_mdBartlomiej Zolnierkiewicz
* Add special cases for pplus and prep to ide_default_{irq,io_base}() (+ FIXMEs about the need to use IDE platform host driver instead). * Remove no longer needed ppc_ide_md and struct ide_machdep_calls. * Then remove <linux/ide.h> include from: - arch/powerpc/kernel/setup_32.c - arch/ppc/kernel/ppc_ksyms.c - arch/ppc/kernel/setup.c - arch/ppc/platforms/pplus.c - arch/ppc/platforms/prep_setup.c There should be no functional changes caused by this patch. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/pplus: remove ppc_ide_md.ide_init_hwif hookBartlomiej Zolnierkiewicz
* Call ide_init_default_irq() for pplus in init_ide_data(). * Remove no longer needed pplus_ide_init_hwif_ports(). There should be no functional changes caused by this patch. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/sandpoint: remove ppc_ide_md hooksBartlomiej Zolnierkiewicz
* Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag for Motorola-Sandpoint platform to sl82c105 host driver. * Disable ide_generic host driver in arch/ppc/configs/sandpoint_defconfig and enable sl82c105 one. * Remove ppc_ide_md hooks from arch/ppc/platforms/sandpoint.c - no need for them (sl82c105 host driver takes care of all this setup). * Then remove no longer needed <linux/ide.h> include. * Also update arch/ppc/platforms/sandpoint.h. Unfortunately (unlike lopec's case) sl82c105 host driver was not enabled in defconfing so there is a funcionality change. [ Not a big deal since sl82c105 is superior over ide_generic. ] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/lopec: remove ppc_ide_md hooksBartlomiej Zolnierkiewicz
* Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag for Motorola-LoPEC platform to sl82c105 host driver. * Remove ppc_ide_md hooks from arch/ppc/platforms/lopec.c - no need for them (sl82c105 host driver takes care of all this setup). * Then remove no longer needed <linux/ide.h> include. Looking at arch/ppc/configs/lopec_defconfig: ... CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_SL82C105=y ... there should be no functional changes unless somebody preferred to disable sl82c105 host driver and use only ide_generic one (but why would anybody want to do such thing :-). PS It seems that lopec_defconfig hasn't been updated for ages but if somebody is going to do it please look into disabling IDE_GENERIC and BLK_DEV_GENERIC config options. Thanks. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/mpc8xx: remove ppc_ide_md hooksBartlomiej Zolnierkiewicz
* Initialize IDE ports in mpc8xx_ide_probe(). * Remove m8xx_ide_init() and ppc_ide_md hooks - no need for them (IDE mpc8xx host driver takes care of all this setup). * Remove needless 'if (irq)' and 'if (data_port >= MAX_HWIFS)' checks from m8xx_ide_init_hwif_ports(). * Remove 'ctrl_port' and 'irq' arguments from m8xx_ide_init_hwif_ports(). * Rename m8xx_ide_init_hwif_ports() to m8xx_ide_init_ports(). * Add __init tag to m8xx_ide_init_ports(). This patch fixes hwif->irq always being overriden to 0 (== auto-probe, is this even working on PPC?) because of ide_init_default_irq() call in ide.c. There should be no other functional changes. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/pmac: remove ppc_ide_md hooksBartlomiej Zolnierkiewicz
* Add pmac_ide_init_ports() helper and use it instead of pmac_ide_init_hwif_ports(). * Remove ppc_ide_md hooks - no need for them (IDE pmac host driver takes care of all this setup). * Then remove no longer needed <linux/ide.h> include from arch/powerpc/platforms/powermac/pmac.h. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-pmac: remove dead codeBartlomiej Zolnierkiewicz
Remove unused pmac_ide_{check_base,get_irq}() and pmac_find_ide_boot(), then remove no longer needed ide_majors[] and pmac_ide_count. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-scsi: do non-atomic pc->flags testingBorislav Petkov
...also, convert ide-scsi to using the generic pc->flags defines. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: use generic ATAPI packet command flags in ide-{floppy,tape}Borislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-floppy: rename end_request handler properlyBorislav Petkov
mv idefloppy_do_end_request -> idefloppy_end_request as is the case with ide-cd Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-scsi: convert driver to using generic ide_atapi_pcBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-floppy: convert driver to using generic ide_atapi_pcBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-tape: convert driver to using generic ide_atapi_pcBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-tape: remove atomic test/set macros for packet commandsBorislav Petkov
Removing the atomic tests for pc's is unobjectionable. Since this driver will probably go to /dev/null soon, the atomic tests for tape->flags are left in place for there are some situations where they're needed (chrdev DSC handling, low level pipeline operation and so on). While at it, rename all test/set flag bit defines explicitly to *_FLAG_* for clarity. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-tape: move all struct and other defs at the topBorislav Petkov
Bart: - no need to move defines for tape flags around (they are completely rewritten by the next patch) Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove IDE_*_REG macrosBartlomiej Zolnierkiewicz
* Add IDE_{ALTSTATUS,IREASON,BCOUNTL,BCOUNTH}_OFFSET defines. * Remove IDE_*_REG macros - this results in more readable and slightly smaller code. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: add ide_atapi_{discard_data,write_zeros} inline helpersBartlomiej Zolnierkiewicz
Add ide_atapi_{discard_data,write_zeros} inline helpers to <linux/ide.h> and use them instead of home-brewn helpers in ide-{floppy,tape,scsi}. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 00:28:20 +0000