summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2012-01-27watchdog: Return proper error in nuc900wdt_probe if misc_register failsAxel Lin
Return proper error instead of 0 if misc_register fails Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: Staticise nuc900_wdtAxel Lin
It is only used in this driver, so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: via_wdt: Staticise wdt_pci_tableAxel Lin
It is only used in this driver, so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Marc Vertes <marc.vertes@sigfox.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: omap_wdt.c: Fix the mismatch of pm_runtime enable and disableShubhrajyoti D
Currently the watchdog driver calls the pm_runtime_enable and never the disable. This may cause a warning when pm_runtime_enable checks for the count match. Also fixes the error /build/watchdog # insmod omap_wdt.ko [ 44.999389] omap_wdt omap_wdt: Unbalanced pm_runtime_enable! [ 45.011047] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec /build/watchdog # Attempting to fix the same by calling pm_runtime_disable. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: dw_wdt.c: use devm_request_and_ioremapJulia Lawall
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: imx2_wdt.c: use devm_request_and_ioremapJulia Lawall
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The variable res_size is then no longer needed. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27Merge branches 'sh/urgent' and 'sh/platform-updates' into sh-latestPaul Mundt
2012-01-27drm/exynos: fixed pm feature for fimd module.Inki Dae
this patch separates fimd specific power on/off function from pm function and the pm interfaces will call that function for power on or off. and also removes unnecessary codes of resume function. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-01-27drm/exynos: fixed build dependency for DRM_EXYNOS_FIMDInki Dae
FB based FIMD and DRM based FIMD drivers use same hardware so with this patch, only one of them would be selected. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-01-27drm/exynos: fix build dependency for DRM_EXYNOS_HDMISeung-Woo Kim
DRM_EXYNOS_HDMI driver and VIDEO_SAMSUNG_S5P_TV driver should be not enabled at once because they use same HW blocks. So dependency for DRM_EXYNOS_HDMI is fixed to check VIDEO_SAMSUNG_S5P_TV=n. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-01-27drm/exynos: use release_mem_region instead of release_resourceSeung-Woo Kim
To make a api pair of request_mem_region and release_mem_region, release_mem_region is used instead of release_resource. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-01-26Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] cinergyT2-fe: Fix bandwdith settings [media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions [media] cxd2820r: sleep on DVB-T/T2 delivery system switch [media] anysee: fix CI init [media] cxd2820r: remove unused parameter from cxd2820r_attach [media] cxd2820r: fix dvb_frontend_ops
2012-01-26firewire: ohci: add reset packet quirk for SB AudigyClemens Ladisch
The Audigy's SB1394 controller is actually from Texas Instruments and has the same bus reset packet generation bug, so it needs the same quirk entry. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.36+ <stable@vger.kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-26Merge branch 'sa11x0-mcp-fixes' into fixesRussell King
2012-01-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix assembler constraint to prevent overeager gcc optimisation mac_esp: rename irq mac_scsi: dont enable mac_scsi irq before requesting it macfb: fix black and white modes m68k/irq: Remove obsolete IRQ_FLG_* definitions Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
2012-01-26uwb & wusb: fix kconfig errorRandy Dunlap
Fix UWB/WUSB kconfig error by changing 'select' to 'depends on'. drivers/usb/wusbcore/Kconfig:4:error: recursive dependency detected! drivers/usb/wusbcore/Kconfig:4: symbol USB_WUSB is selected by USB_HWA_HCD drivers/usb/host/Kconfig:559: symbol USB_HWA_HCD depends on UWB drivers/uwb/Kconfig:5: symbol UWB is selected by USB_WUSB Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26USB: Realtek cr: fix autopm scheduling while atomicStanislaw Gruszka
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=784345 Reported-by: Francis Moreau <francis.moro@gmail.com> Reported-and-tested-by: Christian D <chrisudeussen@gmail.com> Reported-and-tested-by: Jimmy Dorff <jdorff@phy.duke.edu> Reported-and-tested-by: collura@ieee.org Cc: stable@vger.kernel.org # 3.2+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26USB: ftdi_sio: Add more identifiersAlan Cox
0x04d8, 0x000a: Hornby Elite Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26serial: Kill off Moorestown codeAlan Cox
All production devices operate in the Oaktrail configuration with legacy PC elements present and an ACPI BIOS. Continue stripping out the Moorestown elements from the tree leaving Medfield. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26Revert "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode"Greg Kroah-Hartman
This reverts commit 0a697b22252c9d7208b5fb3e9fbd124dd229f1d2 as Paul wants to rework it. Cc: Paul Walmsley <paul@pwsan.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Govindraj Raja <govindraj.r@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26Revert "tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the ↵Greg Kroah-Hartman
chip" This reverts commit 43cf7c0bebf50d0b68aa42ae6d24cf08e3f24823 as Paul wants to redo it. Cc: Paul Walmsley <paul@pwsan.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Govindraj Raja <govindraj.r@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26[media] imon: don't wedge hardware after early callbacksJarod Wilson
This patch is just a minor update to one titled "imon: Input from ffdc device type ignored" from Corinna Vinschen. An earlier patch to prevent an oops when we got early callbacks also has the nasty side-effect of wedging imon hardware, as we don't acknowledge the urb. Rework the check slightly here to bypass processing the packet, as the driver isn't yet fully initialized, but still acknowlege the urb and submit a new rx_urb. Do this for both interfaces -- irrelevant for ffdc hardware, but relevant for newer hardware, though newer hardware doesn't spew the constant stream of data as soon as the hardware is initialized like the older ffdc devices, so they'd be less likely to trigger this anyway... Tested with both an ffdc device and an 0042 device. Reported-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> CC: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-26xen-netfront: correct MAX_TX_TARGET calculation.Wei Liu
Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26agp: fix scratch page cleanupMichal Kubecek
In error cleanup of agp_backend_initialize() and in agp_backend_cleanup(), agp_destroy_page() is passed virtual address of the scratch page. This leads to a kernel warning if the initialization fails (or upon regular cleanup) as pointer to struct page should be passed instead. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-26Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux ↵Dave Airlie
into drm-fixes * 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: (24 commits) drm/i915: fixup forcewake spinlock fallout in drpc debugfs function drm/i915: debugfs: show semaphore registers also on gen7 drm/i915: allow userspace forcewake references also on gen7 drm/i915: Re-enable gen7 RC6 and GPU turbo after resume. drm/i915: Correct debugfs printout for RC1e. Revert "drm/i915: Work around gen7 BLT ring synchronization issues." drm/i915: rip out the HWSTAM missed irq workaround drm/i915: paper over missed irq issues with force wake voodoo drm/i915: Hold gt_lock across forcewake register reads drm/i915: Hold gt_lock during reset drm/i915: Move reset forcewake processing to gen6_do_reset drm/i915: protect force_wake_(get|put) with the gt_lock drm/i915: convert force_wake_get to func pointer in the gpu reset code drm/i915: sprite init failure on pre-SNB is not a failure drm/i915: VBT Parser cleanup for eDP block drm/i915: mask transcoder select bits before setting them on LVDS drm/i915: Add Clientron E830 to the ignore LVDS list CHROMIUM: i915: Add DMI override to skip CRT initialization on ZGB drm/i915: handle 3rd pipe drm/i915: simplify pipe checking ...
2012-01-26pinctrl: add checks for empty function namesTony Lindgren
This is needed as otherwise we can get the following when dealing with buggy data in a pinmux driver for pinmux_search_function: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... PC is at strcmp+0xc/0x34 LR is at pinmux_get+0x350/0x8f4 ... As we need pctldev initialized to call ops->list_functions, let's initialize it before check_ops calls and pass the pctldev to the check_ops functions. Do this for both pinmux and pinconf check_ops functions. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-26pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not setTony Lindgren
The ctrl_dev_name is optional for struct pinmux_map assuming that ctrl_dev is set. Without this patch we can get: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... (pinmux_hog_maps+0xa4/0x20c) (pinctrl_register+0x2a4/0x378) ... Fix this by adding adding a test for map->ctrl_dev. Additionally move the test for map->ctrl_dev earlier to optimize out the loop a bit. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-26pinctrl: fix some pinmux typosTony Lindgren
Fix some pinmux typos so implementing pinmux drivers is a bit easier. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-26OMAPDSS: HDMI: PHY burnout fixTomi Valkeinen
A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-26OMAPDSS: use sync versions of pm_runtime_putTomi Valkeinen
omapdss doesn't work properly on system suspend. The problem seems to be the fact that omapdss uses pm_runtime_put() functions when turning off the hardware, and when system suspend is in process only sync versions are allowed. Using non-sync versions normally and sync versions when suspending would need rather ugly hacks to convey the information of suspending/not-suspending to different functions. Optimally the driver wouldn't even need to care about this, and the PM layer would handle syncing when suspend is in process. This patch changes all omapdss's pm_runtime_put calls to pm_runtime_put_sync. This fixes the suspend problem, and probably the performance penalty of always using sync versions is negligible. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Kevin Hilman <khilman@ti.com>
2012-01-26regulator: Set apply_uV only when min and max voltages are definedKarol Lewandowski
apply_uV is errornously set when regulator is instantiated from device tree, even when it doesn't contain any voltage constraints. This commit fixes error: machine_constraints_voltage: CHARGER: failed to apply 0uV constraint for following regulator description in DTS: CHARGER { regulator-min-microamp = <100000>; regulator-max-microamp = <200000>; } Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ttm: fix two regressions since move_notify changes drm/radeon: avoid deadlock if GPU lockup is detected in ib_pool_get drm/radeon: silence out possible lock dependency warning drm: Fix authentication kernel crash gma500: Fix shmem mapping drm/radeon/kms: refine TMDS dual link checks drm/radeon/kms: use drm_detect_hdmi_monitor for picking encoder mode drm/radeon/kms: rework modeset sequence for DCE41 and DCE5 drm/radeon/kms: move panel mode setup into encoder mode set drm/radeon/kms: move disp eng pll setup to init path drm/radeon: finish getting bios earlier drm/radeon: fix invalid memory access in radeon_atrm_get_bios() drm/radeon/kms: add some missing semaphore init drm/radeon/kms: Add an MSI quirk for Dell RS690 gpu, drm, sis: Don't return uninitialized variable from sis_driver_load()
2012-01-25Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap A fairly simple bugfix for a WARN_ON() which was triggered in the cache reset support as a result of some subsequent work. There's only one mainline user for the code path that's updated right now (wm8994) so should be low risk. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Reset cache status when reinitialsing the cache
2012-01-25xHCI: Cleanup isoc transfer ring when TD length mismatch foundAndiry Xu
When a TD length mismatch is found during isoc TRB enqueue, it directly returns -EINVAL. However, isoc transfer is partially enqueued at this time, and the ring should be cleared. This should be backported to kernels as old as 2.6.36, which contain the commit 522989a27c7badb608155b1f1dea3487ed431f74 "xhci: Fix failed enqueue in the middle of isoch TD." Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-01-25drm/ttm: fix two regressions since move_notify changesBen Skeggs
Both changes in dc97b3409a790d2a21aac6e5cdb99558b5944119 cause serious regressions in the nouveau driver. move_notify() was originally able to presume that bo->mem is the old node, and new_mem is the new node. The above commit moves the call to move_notify() to after move() has been done, which means that now, sometimes, new_mem isn't the new node at all, bo->mem is, and new_mem points at a stale, possibly-just-been-killed-by-move node. This is clearly not a good situation. This patch reverts this change, and replaces it with a cleanup in the move() failure path instead. The second issue is that the call to move_notify() from cleanup_memtype_use() causes the TTM ghost objects to get passed into the driver. This is clearly bad as the driver knows nothing about these "fake" TTM BOs, and ends up accessing uninitialised memory. I worked around this in nouveau's move_notify() hook by ensuring the BO destructor was nouveau's. I don't particularly like this solution, and would rather TTM never pass the driver these objects. However, I don't clearly understand the reason why we're calling move_notify() here anyway and am happy to work around the problem in nouveau instead of breaking the behaviour expected by other drivers. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: Jerome Glisse <j.glisse@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-25drm/i915: fixup forcewake spinlock fallout in drpc debugfs functionDaniel Vetter
My forcewake spinlock patches have a functional conflict with Ben Widawsky's gen6 drpc support for debugfs. Result was a benign warning about trying to read an non-atomic variabla with atomic_read. Note that the entire check is racy anyway and purely informational. Also update it to reflect the forcewake voodoo changes, the kernel can now also hold onto a forcewake reference for longer times. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-25Merge branch 'for-greg' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus * 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: musb: omap2430: minor cleanups. usb: dwc3: unmap the proper number of sg entries usb: musb: fix shutdown while usb gadget is in use usb: gadget: f_mass_storage: Use "bool" instead of "int" in fsg_module_parameters usb: gadget: check for streams only for SS udcs usb: gadget: fsl_udc: fix the usage of udc->max_ep drivers: usb: otg: Fix dependencies for some OTG drivers usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle() usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst too usb: gadget: storage: endian fix usb: dwc3: ep0: fix compile warning usb: musb: davinci: fix build breakage usb: gadget: langwell: don't call gadget's disconnect() usb: gadget: langwell: drop langwell_otg support usb: otg: kill langwell_otg driver usb: dwc3: ep0: tidy up Pending Request handling
2012-01-25drm/radeon: avoid deadlock if GPU lockup is detected in ib_pool_getJerome Glisse
If GPU lockup is detected in ib_pool get we are holding the ib_pool mutex that will be needed by the GPU reset code. As ib_pool code is safe to be reentrant from GPU reset code we should not block if we are trying to get the ib pool lock on the behalf of the same userspace caller, thus use the radeon_mutex_lock helper. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-25drm/radeon: silence out possible lock dependency warningJerome Glisse
Silence out the lock dependency warning by moving bo allocation out of ib mutex protected section. Might lead to useless temporary allocation but it's not harmful as such things only happen at initialization. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-25drm: Fix authentication kernel crashThomas Hellstrom
If the master tries to authenticate a client using drm_authmagic and that client has already closed its drm file descriptor, either wilfully or because it was terminated, the call to drm_authmagic will dereference a stale pointer into kmalloc'ed memory and corrupt it. Typically this results in a hard system hang. This patch fixes that problem by removing any authentication tokens (struct drm_magic_entry) open for a file descriptor when that file descriptor is closed. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-25usb: musb: omap2430: minor cleanups.NeilBrown
1/ remove incorrect comment (it is a non-blocking notifier) 2/ Use correct symbolic return value for notifier 3/ Make sure otg_notifier_work is cancelled before module exit. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Quoth Len: "This fixes a merge-window regression due to a conflict between error injection and preparation to remove atomicio.c Here we fix that regression and complete the removal of atomicio.c. This also re-orders some idle initialization code to complete the merge window series that allows cpuidle to cope with bringing processors on-line after boot." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: Use acpi_os_map_memory() instead of ioremap() in einj driver ACPI, APEI, EINJ, cleanup 0 vs NULL confusion ACPI, APEI, EINJ Allow empty Trigger Error Action Table thermal: Rename generate_netlink_event ACPI / PM: Add Sony Vaio VPCCW29FX to nonvs blacklist. ACPI: Remove ./drivers/acpi/atomicio.[ch] ACPI, APEI: Add RAM mapping support to ACPI ACPI, APEI: Add 64-bit read/write support for APEI on i386 ACPI processor hotplug: Delay acpi_processor_start() call for hotplugged cores ACPI processor hotplug: Split up acpi_processor_add
2012-01-24serial: Fix wakeup init logic to speed up startupSimon Glass
The synchronize_rcu() call resulting from making every serial driver wake-up capable (commit b3b708fa) slows boot down on my Tegra2x system (with CONFIG_PREEMPT disabled). But this is avoidable since it is the device_set_wakeup_enable() and then subsequence disable which causes the delay. We might as well just make the device wakeup capable but not actually enable it for wakeup until needed. Effectively the current code does this: device_set_wakeup_capable(dev, 1); device_set_wakeup_enable(dev, 1); device_set_wakeup_enable(dev, 0); We can just drop the last two lines. Before this change my boot log says: [ 0.227062] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.702928] serial8250.0: ttyS0 at MMIO 0x70006040 (irq = 69) is a Tegra after: [ 0.227264] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.227983] serial8250.0: ttyS0 at MMIO 0x70006040 (irq = 69) is a Tegra for saving of 450ms. Suggested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24drivers: misc: Remove MISC_DEVICES config optionFabio Estevam
MISC_DEVICES option alone does not select any kernel code and can cause dependency build warnings, such as: warning: (KS8851 && AX88796_93CX6 && RTL8180 && RTL8187 && ADM8211 && RT2400PCI && RT2500PCI && RT61PCI && RT2800PCI && R8187SE) selects EEPROM_93CX6 which has unmet direct dependencies (MISC_DEVICES) As the current drivers/misc/Kconfig stands, it is only possible to select the drivers below if MISC_DEVICES option is selected: source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" source "drivers/misc/iwmc3200top/Kconfig" source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" So remove MISC_DEVICES option so that nothing is dependant on it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24c2port: fix build error for duramar2150 due to missing header.Paul Gortmaker
This file needs the basic headers for resource management, otherwise we will see this build error: CC [M] drivers/misc/c2port/c2port-duramar2150.o drivers/misc/c2port/c2port-duramar2150.c: In function ‘duramar2150_c2port_init’: drivers/misc/c2port/c2port-duramar2150.c:125:2: error: implicit declaration of function ‘request_region’ [-Werror=implicit-function-declaration] drivers/misc/c2port/c2port-duramar2150.c:139:2: error: implicit declaration of function ‘release_region’ [-Werror=implicit-function-declaration] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24serial: amba-pl011: lock console writes against interruptsRabin Vincent
Protect against pl011_console_write() and the interrupt for the console UART running concurrently on different CPUs. Otherwise the console_write could spin for a long time waiting for the UART to become not busy, while the other CPU continuously services UART interrupts and keeps the UART busy. The checks for sysrq and oops_in_progress are taken from 8250.c. Cc: stable <stable@vger.kernel.org> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Bibek Basu <bibek.basu@stericsson.com> Reviewed-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24amba-pl011: do not disable RTS during shutdownShreshtha Kumar Sahu
In present driver, shutdown clears RTS and DTR in CR register. But the documentation "Documentation/serial/driver" suggests not to disable RTS and DTR in shutdown(). Also RTS and DTR is preserved between shutdown and startup calls, i.e. these are restored in startup if they were enabled while doing shutdown. So that if RTS and DTR are set using pl011_set_mctrl then it should continue even after shutdown->startup sequence. For throttling/unthrottling user should call pl011_set_mctrl. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Davem says: 1) Fix JIT code generation on x86-64 for divide by zero, from Eric Dumazet. 2) tg3 header length computation correction from Eric Dumazet. 3) More build and reference counting fixes for socket memory cgroup code from Glauber Costa. 4) module.h snuck back into a core header after all the hard work we did to remove that, from Paul Gortmaker and Jesper Dangaard Brouer. 5) Fix PHY naming regression and add some new PCI IDs in stmmac, from Alessandro Rubini. 6) Netlink message generation fix in new team driver, should only advertise the entries that changed during events, from Jiri Pirko. 7) SRIOV VF registration and unregistration fixes, and also add a missing PCI ID, from Roopa Prabhu. 8) Fix infinite loop in tx queue flush code of brcmsmac, from Stanislaw Gruszka. 9) ftgmac100/ftmac100 build fix, missing interrupt.h include. 10) Memory leak fix in net/hyperv do_set_mutlicast() handling, from Wei Yongjun. 11) Off by one fix in netem packet scheduler, from Vijay Subramanian. 12) TCP loss detection fix from Yuchung Cheng. 13) TCP reset packet MD5 calculation uses wrong address, fix from Shawn Lu. 14) skge carrier assertion and DMA mapping fixes from Stephen Hemminger. 15) Congestion recovery undo performed at the wrong spot in BIC and CUBIC congestion control modules, fix from Neal Cardwell. 16) Ethtool ETHTOOL_GSSET_INFO is unnecessarily restrictive, from Michał Mirosław. 17) Fix triggerable race in ipv6 sysctl handling, from Francesco Ruggeri. 18) Statistics bug fixes in mlx4 from Eugenia Emantayev. 19) rds locking bug fix during info dumps, from your's truly. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) rds: Make rds_sock_lock BH rather than IRQ safe. netprio_cgroup.h: dont include module.h from other includes net: flow_dissector.c missing include linux/export.h team: send only changed options/ports via netlink net/hyperv: fix possible memory leak in do_set_multicast() drivers/net: dsa/mv88e6xxx.c files need linux/module.h stmmac: added PCI identifiers llc: Fix race condition in llc_ui_recvmsg stmmac: fix phy naming inconsistency dsa: Add reporting of silicon revision for Marvell 88E6123/88E6161/88E6165 switches. tg3: fix ipv6 header length computation skge: add byte queue limit support mv643xx_eth: Add Rx Discard and Rx Overrun statistics bnx2x: fix compilation error with SOE in fw_dump bnx2x: handle CHIP_REVISION during init_one bnx2x: allow user to change ring size in ISCSI SD mode bnx2x: fix Big-Endianess in ethtool -t bnx2x: fixed ethtool statistics for MF modes bnx2x: credit-leakage fixup on vlan_mac_del_all macvlan: fix a possible use after free ...
2012-01-24qcaux: add more Pantech UML190 and UML290 portsDan Williams
More ports we now know how to talk to. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24Revert "drivers: usb: Fix dependency for USB_HWA_HCD"Greg Kroah-Hartman
This reverts commit 0dd2b62ada6f911fbd13e98e98f57f4edc42c604. It causes a bunch of Kconfig errors: drivers/usb/host/Kconfig:559:error: recursive dependency detected! drivers/usb/host/Kconfig:559: symbol USB_HWA_HCD depends on UWB drivers/uwb/Kconfig:5: symbol UWB is selected by USB_WUSB drivers/usb/wusbcore/Kconfig:4: symbol USB_WUSB is selected by USB_HWA_HCD showing that this really wasn't the correct fix at all. Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 22:26:32 +0000