summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-12[NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform dataEric Miao
Now that the original SMC_USE_PXA_DMA specific code will always being built if CONFIG_ARCH_PXA is defined, so to make this part of the code to be PXA public, and still prevent it from being built if support of PXA is not selected. A SMC91X_USE_DMA flag is added to the platform data to allow platform to choose its usage of DMA. Note this flag itself is so named to be generic enough (assuming other platforms can also use DMA). It keeps backward compatibility to set the SMC91X_USE_DMA flag if SMC_USE_PXA_DMA is still defined. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variableEric Miao
Now one can use the following code #define SMC_IO_SHIFT lp->io_shift to make SMC_IO_SHIFT a variable. This, however, will slightly increase the CPU overhead and have negative impact on the network performance. The tradeoff is, this can be specified in the smc91x platform data so that multiple boards support can be built in a single zImage. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[NET] smc91x: add SMC91X_NOWAIT flag to platform dataEric Miao
And also favors the usage of SMC91X_NOWAIT over the hardcoded SMC_NOWAIT by converting "nowait" (module parameter overridable) to platform flag. There are several possibilities: 1. platform data present - preferred and use as is 2. platform data absent - use "nowait", it can be: a. SMC_NOWAIT if defined b. default to 0 if SMC_NOWAIT isn't defined c. overriden by module parameter Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_*Eric Miao
Let's simplify the logic and avoid confusion, the use of SMC91X_USE_* is favored than SMC_CAN_USE_*, if platform data isn't given, convert the hardcoded SMC_CAN_USE_* to SMC91X_USE_*. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[NET] smc91x: remove "irq_flags" from "struct smc91x_platdata"Eric Miao
IRQ trigger type can be specified in the IRQ resource definition by IORESOURCE_IRQ_*, we need only one way to specify this. This also fixes the following small issue: To allow dynamic support for multiple platforms, when those relevant macros are not defined for one specific platform, the default case will be: - SMC_DYNAMIC_BUS_CONFIG defined - and SMC_IRQ_FLAGS = IRQF_TRIGGER_RISING While if "irq_flags" is missing when defining the smc91x_platdata, usually as follows: static struct smc91x_platdata xxxx_smc91x_data = { .flags = SMC91X_USE_XXBIT, }; The lp->cfg.irq_flags will always be overriden by the above structure (due to a memcpy), thus rendering lp->cfg.irq_flags to be "0" always. (regardless of the default SMC_IRQ_FLAGS or IORESOURCE_IRQ_* flags) Fixes this by forcing to use IORESOURCE_IRQ_* flags if present, and make the only user of smc91x_platdata.irq_flags (renesas/migor) to use IORESOURCE_IRQ_*. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12Merge branch 'eseries' into pxaRussell King
Conflicts: arch/arm/mach-pxa/Makefile
2008-07-12Merge branch 'pxa-tosa' into pxaRussell King
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/tosa.c arch/arm/mach-pxa/spitz.c
2008-07-12Merge branches 'pxa-ian' and 'pxa-xm270' into pxaRussell King
Conflicts: MAINTAINERS
2008-07-10PXA UDC - allow use of inverted GPIO for pullupIan Molton
Signed-off-by: Ian Molton <spyro@f2s.com>
2008-07-10Merge branches 'pxa-ezx', 'pxa-magician' and 'pxa-palm' into pxaRussell King
2008-07-10[ARM] 5164/1: pxafb: Support for RGB666, RGBT666, RGB888 and RGBT888Stefan Schmidt
Add the .depth field to pxafb_mode_info and use it to set pixel data format as 18(RGB666), 19(RGBT666), 24(RGB888) or 25(RGBT888) Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10[ARM] 5155/1: PalmTX battery monitorMarek Vašut
This patch adds battery monitoring driver for PalmTX. It can read voltage from the battery and temperature. It also monitors charging/discharging status. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10[ARM] 5154/1: PalmTX PCMCIAMarek Vašut
This patch adds PCMCIA support for PalmTX handheld computer. There is one chip hard-soldered to slot0, another slot is not in use and not accessible. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09Merge branch 'machtypes' into pxa-palmRussell King
2008-07-09[ARM] 5105/1: CM-X270: update NAND flash driver to use gpio_libMike Rapoport
Update CM-X270 NAND flash driver to use gpio_lib. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5104/1: CM-X270: PCMCIA updatesMike Rapoport
Convert to use gpio_lib interface. Remove support for second PCMCIA slot to avoid run-time conflicts with MMC/SD because of shared GPIO Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC ↵Philipp Zabel
drivers The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform driver name changes from pxa2xx-udc to pxa25x-udc) and the platform driver name of pxa27x_udc.c is fixed to pxa27x-udc. pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors and the pxa27x_device_udc is enabled in pxa27x.c. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Including from Ian Molton: Fixes for mistakes left over from the PXA2{5,7}X UDC split. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin settingDmitry Baryshkov
is handled in board code Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5144/1: pxaficp_ir: cleanup includesDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09Merge branches 'pxa-misc', 'pxa-pwm' and 'pxa-multi' into pxaRussell King
2008-07-07[ARM] 5135/1: pxa: drop superfluous asm/arch/pxa2xx-gpio.h includesPhilipp Zabel
Both i2c-pxa.c and irq.c still include pxa2xx-gpio.h although is is not needed anymore. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5118/1: pxafb: add exit and remove handlersJaya Kumar
This patch adds exit and remove handlers to pxafb so that it can be loaded and unloaded as a module. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5128/1: tc6393xb: tmio-nand supportDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5127/1: Core MFD supportDmitry Baryshkov
This patch provides a common subdevice registration system for MFD type chips, using platfrom device. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5096/2: Support Toshiba TC6393XB Mobile I/O Controller.Dmitry Baryshkov
Add support for Toshiba TC6393XB companion chip. Currently only GPIO and part of IRQ features of the device are supported. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] 5064/1: pxa: explicitly specify tosa keyboard GPIOs' low power states ↵eric miao
to DRIVE_LOW Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5141/1: PWM: pwm_request() should return an PTR_ERR() instead of NULL.Ben Dooks
Make the return of pwm_request() be more informative than just being NULL on error by using PTR_ERR() to respond with an approriate error. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5044/1: pwm_bl: add init/notify/exit callbacksPhilipp Zabel
This allows platform code to manipulate GPIOs and brightness level as needed. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] pxa: add generic PWM backlight drivereric miao
Patch mostly from Eric Miao, with minor edits by rmk to convert Eric's driver to a generic PWM-based backlight driver. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: Revert "[WATCHDOG] hpwdt: Add CFLAGS to get driver working"
2008-06-24enable bus mastering on i915 at resume timeJie Luo
On 9xx chips, bus mastering needs to be enabled at resume time for much of the chip to function. With this patch, vblank interrupts will work as expected on resume, along with other chip functions. Fixes kernel bugzilla #10844. Signed-off-by: Jie Luo <clotho67@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-24Revert "[WATCHDOG] hpwdt: Add CFLAGS to get driver working"Wim Van Sebroeck
After Linus fixed the inline assembly, the CFLAGS option is not needed anymore. Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-06-23Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: xen: don't drop NX bit xen: mask unwanted pte bits in __supported_pte_mask xen: Use wmb instead of rmb in xen_evtchn_do_upcall(). x86: fix NULL pointer deref in __switch_to
2008-06-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Clear ICM pages before handing to FW
2008-06-23removed unused var real_tty on n_tty_ioctl()Gustavo Fernando Padovan
I noted that the 'struct tty_struct *real_tty' is not used in this function, so I removed the code about 'real_tty'. Signed-off-by: Gustavo Fernando Padovan <gustavo@las.ic.unicamp.br> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-23IB/mthca: Clear ICM pages before handing to FWEli Cohen
Current memfree FW has a bug which in some cases, assumes that ICM pages passed to it are cleared. This patch uses __GFP_ZERO to allocate all ICM pages passed to the FW. Once firmware with a fix is released, we can make the workaround conditional on firmware version. This fixes the bug reported by Arthur Kepner <akepner@sgi.com> here: http://lists.openfabrics.org/pipermail/general/2008-May/050026.html Cc: <stable@kernel.org> Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Rewritten to be a one-liner using __GFP_ZERO instead of vmap()ing ICM memory and memset()ing it to 0. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-06-21Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (lm75) sensor reading bugfix hwmon: (abituguru3) update driver detection hwmon: (w83791d) new maintainer hwmon: (abituguru3) Identify Abit AW8D board as such hwmon: Update the sysfs interface documentation hwmon: (adt7473) Initialize max_duty_at_overheat before use hwmon: (lm85) Fix function RANGE_TO_REG()
2008-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: netns: Don't receive new packets in a dead network namespace. sctp: Make sure N * sizeof(union sctp_addr) does not overflow. pppoe: warning fix ipv6: Drop packets for loopback address from outside of the box. ipv6: Remove options header when setsockopt's optlen is 0 mac80211: detect driver tx bugs
2008-06-20pppoe: warning fixStephen Hemminger
Fix warning: drivers/net/pppoe.c: In function 'pppoe_recvmsg': drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast because skb->len is unsigned int and total_len is size_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: BAST: Remove old IDE driver pcmcia ide kingston compactflash's have a new manufacturer id pcmcia: add another pata/ide ID pcmcia: add an pata/ide ID ide: increase timeout in wait_drive_not_busy() palm_bk3710: fix resource management
2008-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: Kconfig menu touch-up firewire: Kconfig menu touch-up firewire: deadline for PHY config transmission firewire: fw-ohci: unify printk prefixes firewire: fill_bus_reset_event needs lock protection firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID firewire: fw-ohci: disable PHY packet reception into AR context firewire: fw-ohci: use of uninitialized data in AR handler firewire: don't panic on invalid AR request buffer
2008-06-20Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: no AC status notification ACPI Exception (video-1721): UNKNOWN_STATUS_CODE, Cant attach device
2008-06-20Merge branch 'drm-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits) drm: only trust core drm ioctls - driver ioctls are a mess. drm/i915: add support for Intel series 4 chipsets. drm/radeon: add hier-z registers for r300 and r500 chipsets drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT drm/radeon: switch IGP gart to use radeon_write_agp_base() drm/radeon: Restore sw interrupt on resume drm/r500: add support for AGP based cards. drm/radeon: fix texture uploads with large 3d textures (bug 13980) drm/radeon: add initial r500 support. drm/radeon: init pipe setup in kernel code. drm/radeon: fixup radeon_do_engine_reset drm/radeon: fix pixcache and purge/cache flushing registers drm/radeon: write AGP_BASE_2 on chips that support it. drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support drm/radeon: IGP clean up register and magic numbers. drm/rs690: set base 2 to 0. drm/rs690: set all of gart base address. radeon: add production microcode from AMD drm: pcigart use proper pci map interfaces. drm: the sg alloc ioctl should write back the handle to userspace ...
2008-06-20Merge branch 'agp-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: [agp]: fixup chipset flush for new Intel G4x. agp: brown paper bag patch - put back the two lines it took out.
2008-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue. Blackfin arch: fix typo error in bf548 serial header file
2008-06-20Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: sis can't do PMP ata_piix: add TECRA M4 to broken suspend list LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver sata_mv: warn on PIO with multiple DRQs sata_mv: enable async_notify for 60x1 Rev.C0 and higher libata: don't check whether to use DMA or not for no data commands ahci: jmb361 has only one port
2008-06-20[watchdog] hpwdt: fix use of inline assemblyLinus Torvalds
The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken, and included all the function prologue and epilogue stuff, even though it was itself then inside a C function where the compiler would add its own prologue and epilogue on top of it all. This then just _happened_ to work if you had exactly the right compiler version and exactly the right compiler flags, so that gcc just happened to not create any prologue at all (the gcc-generated epilogue wouldn't matter, since it would never be reached). But the more proper way to fix it is to simply not do this. Move the inline asm to the top level, with no surrounding function at all (the better alternative would be to remove the prologue and make it actually use proper description of the arguments to the inline asm, but that's a bigger change than the one I'm willing to make right now). Tested-by: S.Çağlar Onur <caglar@pardus.org.tr> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-20BAST: Remove old IDE driverBen Dooks
Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-20pcmcia ide kingston compactflash's have a new manufacturer idChristophe Niclaes
Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID, In their new CF cards, they use a new one. Let's the ide subsystem recognize CF cards with the new id. Signed-off-by: Christophe Niclaes <cniclaes@develtech.com> Acked-by: Philippe De Muyter <phdm@macqel.be> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-20pcmcia: add another pata/ide IDKristoffer Ericson
Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters <w1ll14@gmail.com> Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-09 05:09:47 +0000