summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-07-06Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2011-07-05ssb: use pci_dev->subsystem_{vendor,device}Sergei Shtylyov
The SSB code reads PCI subsystem IDs from the PCI configuration registers while they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}' fields of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05ssb: use pci_dev->revisionSergei Shtylyov
The SSB code reads PCI revision ID from the PCI configuration register while it's already stored by the PCI subsystem in the 'revision' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05b43: Add RX side DMA memory barrierMichael Büsch
This adds a memory barrier to ensure the writes to the ring memory are committed before the DMA ring pointer is updated. We do a similar thing on the TX side already. Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05NFC: pn533: add NXP pn533 nfc device driverAloisio Almeida Jr
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05NFC: add nfc subsystem coreLauro Ramos Venancio
The NFC subsystem core is responsible for providing the device driver interface. It is also responsible for providing an interface to the control operations and data exchange. Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05ssb: PCI revision ID register is 8-bit wideSergei Shtylyov
The SSB code reads PCI revision ID register as 16-bit entity while the register is actually 8-bit only (the next 8 bits are the programming interface register). Fix the read and make the 'rev' field of 'struct ssb_boardinfo' 8-bit as well, to match the register size. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05rtlwifi: rtl8192de: Fix error exit from hw_initLarry Finger
In routine rtl92de_hw_init(), there are two places where a failure is not handled correctly. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05rtlwifi: rtl8192de: Replace loops calling udelay with single mdelayLarry Finger
There are a number of loops to implement delays. These are replaced with single calls to mdelay(). The need for a fix was noted by Andrew Morton <akpm@linux-foundation.org>. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05carl9170: use carl9170 queue enumsChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05rtlwifi: rtl8192de: Remove comparison of boolean with trueLarry Finger
Tests of a boolean against "true" are not needed as non-zero is sufficient.. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05rtlwifi: rtl8192{ce,cu,se} Remove irq_enabledMike McCormack
This should be unnecessary if synchronize_irq is used. Signed-off-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05rtlwifi: rtl8192de: Remove irq_enabled booleanLarry Finger
Prepare rtl8192de for the removal of irq_enaqbled. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05drivers/net/wireless/rtlwifi/rtl8192de/phy.c: fix udelay() usageAndrew Morton
ERROR: "__bad_udelay" [drivers/net/wireless/rtlwifi/rtl8192de/rtl8192de.ko] undefined! Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05carl9170: allow PSM if the 5 GHz band is selectedChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05carl9170: enable IEEE80211_HW_NEED_DTIM_PERIODChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05carl9170: import 1.9.4 firmware headersChristian Lamparter
This patch imports all shared header changes from carl9170fw.git. * update copyright boilerplate * add some more strategic __aligned(4). * WoWLAN Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-01iwlagn: remove the indirection for the rx write pointerEmmanuel Grumbach
Not needed since the driver split. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: remove hcmd opsWey-Yi Guy
All "agn" devices use the same hcmd functions, no need to call indirectly. remove hcmd_ops Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: call bt_coex directllyWey-Yi Guy
Call the 2-wire and advanced bt-coex function directly to avoid mistake Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: scd memory boundaryWey-Yi Guy
Assign memory boundary for SCD context, tx status and translation table Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: move the tx allocation funcs to the transport layerEmmanuel Grumbach
These functions allocate all the Tx context. Only the simple tx_init is exported as API. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: add rx_free to transport layerEmmanuel Grumbach
The transport layer ness to release all rx ressources. This function is an API for it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: introduce transport layer and implement rx_initEmmanuel Grumbach
The transport layer is responsible for all the queues, DMA rings etc... This is the beginning of the separation of all the code that is tighly related to HW design to the aforementioned transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: add module parameter to disable stuck queue watchdog timerWey-Yi Guy
Add the parameter to disable stuck queue watchdog timer, different platforms might have different timing. Provide the option to disable the timer to prevent un-necessary firmware reload. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: add correct firmware name for 135 seriesWey-Yi Guy
135 series are WiFi/BT combo and require different uCode from 105 series. [A Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: re-define the testmode cmd and attr enumWey-Yi Guy
To make sure not having issues when adding new testmode commands or attributes in the future, re-define the enum. no functional changes Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: verify mutex held for sync commandsJohannes Berg
Emmanuel noticed that there's no explicit checking that prevents the driver from attempting to issue multiple synchronous commands at the same time and wrote a patch to check. However, his patch warns only if a collision actually happened, an unlikely thing since the driver mutex should be held for synchronous command submissions. So instead of checking that a collision happened add a check that the mutex is held which ensures that collisions can't happen. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-29rtlwifi: potential forever loop in rtl92de_hw_init()Dan Carpenter
"i" should be an int here because we are trying to use it to count to 10000. The original code looks like it could hang in a forever loop. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29rtlwifi: rtl8192de: Fix build errors when using allyes configurationLarry Finger
After adding rtl8192de to linux-next, making the rtlwifi drivers be built-in results in the following warnings: LD drivers/net/wireless/rtlwifi/built-in.o drivers/net/wireless/rtlwifi/rtl8192de/built-in.o: In function `rtl92ce_sw_led_on': (.text+0x11fb6): multiple definition of `rtl92ce_sw_led_on' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.text+0xa326): first defined here drivers/net/wireless/rtlwifi/rtl8192de/built-in.o:(.bss+0x0): multiple definition of `dm_digtable' drivers/net/wireless/rtlwifi/rtl8192c/built-in.o:(.bss+0x0): first defined here ld: Warning: size of symbol `dm_digtable' changed from 40 in drivers/net/wireless/rtlwifi/rtl8192c/built-in.o to 48 in drivers/net/wireless/rtlwifi/rtl8192de/built-in.o drivers/net/wireless/rtlwifi/rtl8192de/built-in.o: In function `rtl92ce_sw_led_off': (.text+0x11cfe): multiple definition of `rtl92ce_sw_led_off' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.text+0xa06e): first defined here Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: correct 0x2059 radio initRafał Miłecki
Sometimes additional steps are performed while initializing 2059 radio. We did not find the condition yet, so make it always true for now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29ath9k_htc: Add device ID for Sony UWA-BR100Mohammed Shafi Shajakhan
for more details please take a look at: http://comments.gmane.org/gmane.linux.drivers.ath9k.devel/6541 http://www.wikidevi.com/wiki/Sony_UWA-BR100 Reported-by: Thomas Novin <thomas@xyz.pp.se> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29ath9k: move few descriptor macros to ath9k.hMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: basic PHY initRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: add init tablesRafał Miłecki
They were written from observing MMIO writes to registers 0x72 0x74 and 0x73 right after phy_write(0x017e) <- 0x3830 which finishes chennel switching. RegExps were used to translate writes to arrays. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: init radio when enabling itRafał Miłecki
Masks and sets were found in MMIO dumps by using MMIO hacks. Shortly: radio_write(0x0c51) <- 0x0070 radio_write(0x0c5a) <- 0x0003 radio_write(0x0146) <- 0x0003 radio_write(0x0546) <- 0x0003 radio_write(0x0946) <- 0x0003 radio_write(0x002e) <- 0x0078 radio_write(0x00c0) <- 0x0080 radio_write(0x002e) <- 0xff87 radio_write(0x00c0) <- 0xff7f radio_write(0x0011) <- 0xfff7 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: replace radio routing magic numbersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29wl12xx: AP-mode - use mac80211 indication about STA WME supportArik Nemtsov
When adding a station, use the information given in the mac80211 populated ieee80211_sta structure to determine if it supports WME. Provide this information to the FW. This patch depends on "mac80211: propagate information about STA WME support down". Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29rtlwifi: use PCI_VENDOR_ID_*Jon Mason
Use PCI_VENDOR_ID_* from pci_ids.h instead of creating #define locally. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29rtlwifi: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, remove unnecessary and unused #defines for PCI. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29iwlegacy: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: implement lacking 0x908 PHY reg opRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: add channel switching tables for 2 GHz bandRafał Miłecki
Tables were taken from observing writes in MMIO dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: perform some tables ops on channel switchingRafał Miłecki
Starring at MMIO dumps around PHY channel switching has led to finding serie of 3 similar ops this patch implements. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: upload PHY values when switching channelRafał Miłecki
After calibrating radio you can find few PHY writes in MMIO dumps: phy_read(0x0009) -> 0x0000 phy_write(0x01ce) <- 0x03dd phy_write(0x01cf) <- 0x03d9 phy_write(0x01d0) <- 0x03d5 phy_write(0x01d1) <- 0x0424 phy_write(0x01d2) <- 0x0429 phy_write(0x01d3) <- 0x042d By comparing to N-PHY code we found out that they are PHY tables for channel switching plus band info read at the beginning. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: prepare place for HT-PHY tablesRafał Miłecki
They are big arrays uploaded to the hardware on init, calibration, etc. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-tx.c
2011-06-28iwlagn: use PCI_DMA_* for pci_* operationsJohn W. Linville
"iwlagn: map command buffers BIDI" uses the DMA_* enumerations for DMA directions, even though the pci_* DMA API is still in use. That patch was undoubtedly developed on top of "iwlagn: don't use the PCI wrappers for DMA operation", which is due in the next release. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27bcma: main.c needs to include <linux/slab.h>Geert Uytterhoeven
m68k allmodconfig: drivers/bcma/main.c: In function ‘bcma_release_core_dev’: drivers/bcma/main.c:68: error: implicit declaration of function ‘kfree’ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> -- http://kisskb.ellerman.id.au/kisskb/buildresult/4243344/ drivers/bcma/main.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27iwlwifi: use pci_dev->revision, againSergei Shtylyov
Commit ff938e43d39e926de74b32a3656c190f979ab642 (net: use pci_dev->revision, again) already converted this driver to using the 'revision' field of 'struct pci_dev' but commit 084dd79172cb3aad11d2b7ee5628d57badca7c6e (iwlagn: move PCI related operations from probe and remove to PCI layer) has again added the code to read the PCI revision ID register... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-11 21:54:04 +0000