summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2008-04-24leds: Add new driver for the LEDs on the Freecom FSG-3Rod Whitby
The LEDs on the Freecom FSG-3 are connected to an external memory-mapped latch on the ixp4xx expansion bus, and therefore cannot be supported by any of the existing LEDs drivers. Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24leds: Add support to leds with readable statusHenrique de Moraes Holschuh
Some led hardware allows drivers to query the led state, and this patch adds a hook to let the led class take advantage of that information when available. Without this functionality, when access to the led hardware is not exclusive (i.e. firmware or hardware might change its state behind the kernel's back), reality goes out of sync with the led class' idea of what the led is doing, which is annoying at best. Behaviour for drivers that do not or cannot read the led status is unchanged. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24leds: enable support for blink_set() platform hook in leds-gpioHerbert Valerio Riedel
Enhance leds-gpio to provide hardware-based led flashing by passing through the blink_set() call to a optionally set platform-specific function pointer. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24leds: Cleanup various whitespace and code style issuesNémeth Márton
Break the lines which were more than 80 characters into more lines; replace SPACEs with TABs; correct ident at switch-case; change character encoding from ISO-8859-2 to UTF-8. The order of the functions in led-triggers.c changed in order the similar functions can still be together under titles "Used by LED Class", "LED Trigger Interface" and "Simple LED Tigger Interface" as was grouped before when exported with EXPORT_SYMBOL. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24leds: disable triggers on brightness setNémeth Márton
Disable any active triggers when the brightness attribute is set to zero. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24leds: Add mail LED support for "Clevo D400P"Mrton Nmeth
The leds-clevo-mail module also works with model "Clevo D400P", add this model to the white list. Signed-off-by: Mrton Nmeth <nm127@freemail.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes: "make namespacecheck" fixes x86: fix compilation error in VisWS x86: voyager fix x86: Drop duplicate from setup.c intel-iommu.c: dma ops fix
2008-04-24intel-iommu.c: dma ops fixIngo Molnar
Stephen Rothwell noticed that: Commit 2be621498d461b63ca6124f86e3b9582e1a8e722 ("x86: dma-ops on highmem fix") in Linus' tree introduced a new warning (noticed in the x86_64 allmodconfig build of linux-next): drivers/pci/intel-iommu.c:2240: warning: initialization from incompatible pointer type Which points at an instance of map_single that needs updating. Fix it to the new prototype. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (452 commits) V4L/DVB (7731): tuner-xc2028: fix signal strength calculus V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwares V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtv V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were broken V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800 V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder support V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L interface V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2 V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a common exit point V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failure V4L/DVB (7719): pvrusb2: Implement input selection enforcement V4L/DVB (7718): pvrusb2-dvb: update Kbuild selections V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxx V4L/DVB (7716): pvrusb2: clean up global functions V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__ V4L/DVB (7714): pvrusb2: Fix hang on module removal V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdown V4L/DVB (7712): pvrusb2: Close connect/disconnect race V4L/DVB (7711): pvrusb2: Fix race on module unload V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for onair devices ...
2008-04-24V4L/DVB (7731): tuner-xc2028: fix signal strength calculusMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwaresMauro Carvalho Chehab
There are different tables for MTS firmwares. This should be taken into account while selecting the proper firmware. While at tuner-xc2028.h, improve some comments. Thanks to Edward J. Sheldrake <ejs1920@yahoo.co.uk> for helping to diagnose such troubles with PAL/I standard. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtvAlan Cox
Frank Bennett reported that ivtv was causing skype to crash. With help from one of their developers he showed it was a kernel problem. VIDIOCGCAP copies a name into a fixed length buffer - ivtv uses names that are too long and does not truncate them so corrupts a few bytes of the app data area. Possibly the names also want trimming but for now this should fix the corruption case. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were brokenMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800Steven Toth
cx23885: Enable cx23417 support on the HVR1800 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder supportSteven Toth
cx23885: Add generic cx23417 hardware encoder support. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L ↵Mike Isely
interface Change how list of possible pvrusb2 inputs is generated to include only those interfaces that make sense for the interface instance. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2Mike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a ↵Mike Isely
common exit point Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failureMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7719): pvrusb2: Implement input selection enforcementMike Isely
In the pvrusb2 driver, different interfaces (e.g. V4L, DVB) have Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7718): pvrusb2-dvb: update Kbuild selectionsMichael Krufky
These changes are required with the addition of digital television support for the Hauppauge HVR1900 & HVR1950, the OnAir Creator and Sasem USB HDTV Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxxMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7716): pvrusb2: clean up global functionsAdrian Bunk
This patch contains the following cleanups: - make the following needlessly global function static: - pvr2_hdw_set_cur_freq() - #if 0 the following unused global functions: - pvr2_hdw_get_state_name() - pvr2_hdw_get_debug_info_unlocked() - pvr2_hdw_get_debug_info_locked() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__Mike Isely
Apparently the kernel developers no longer consider it proper etiquette to use __FUNCTION__; everyone must instead use __func__ (even though it breaks with older compilers). And worse still, actual effort is being expended to sweep this change throughout the kernel source tree. Don't these people have better things to do? So... Completely clean out all use of __FUNCTION__ from the pvrusb2 driver (it was just in the sysfs interface). I'm not going to use __func__ either. So there. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7714): pvrusb2: Fix hang on module removalMike Isely
The pvrusb2 driver was getting had by this scenario: 1. Task A calls kthread_stop() for task B. 2. Before exiting, then Task B calls kthread_stop() for task C. The problem is, kthread_stop() wants to allocate an internal resource to itself (i.e. acquire a lock), which won't be released until kthread_stop() returns. But kthread_stop() won't return until task B is dead. But task B won't die until it finishes its call to kthread_stop() for task C, and that will block waiting on the resource already allocated inside task A. Deadlock. With the pvrusb2 driver, task A is the caller to pvr_exit(), task B is the control thread run inside of pvrusb2-context.c, and task C is any worker thread run inside of pvrusb2-hdw.c. This problem got introduced by the previous threading setup change, which was itself an attempt to fix a module tear-down race (which it actually did fix). The lesson here is that a task being waited on as part of a kthread_stop() simply cannot be allow to also issue a kthread_stop() - or we make sure not to issue the enclosing kthread_stop() until we know that the inner kthread_stop() has completed first. The solution for the pvrusb2 driver is some hackish code which changes the main control thread tear down into a two step process. This then makes it possible to delay issuing the kthread_stop() on the control thread until after we know that everything has been torn down first. (And yes, we really need that kthread_stop() because it's the only way to safely guarantee that a module-referencing kernel thread has safely returned back out of the module before we finally remove the module.) Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdownMike Isely
Earlier fix to handle DVB feed thread aborts was overly-aggressive. We can take better advantage of what kthread_stop() can do. This change simplifies things. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7712): pvrusb2: Close connect/disconnect raceMike Isely
If a disconnect happens before initialization is completed, the pvrusb2 driver can accidentally touch dangling pointers. The whole initialization function must be protected by the big_lock, and once inside that lock, the initialization function should abort if it is discovered that a disconnect has already taken place. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7711): pvrusb2: Fix race on module unloadMike Isely
The pvrusb2 driver - for basically forever - was not enforcing a proper module tear-down. Kernel threads are used inside the driver and all must be gone before the module can be safely removed. This changeset reimplements a chunk of pvrusb2-context.c to enforce this correctly. Unfortunately this is not a simple fix. The new implementation also cuts back on kernel thread usage; instead of there being 1 control thread per instance now it's just 1 control thread shared by all instances. (By dropping to a single thread then the module exit function can block on its shutdown and the thread itself can monitor and cleanly shut down all of the other instances first.) Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for ↵Mike Isely
onair devices Implement timed measurement of encoder operation for the first time it is run. This allows the driver to note when the encoder has been run successfully for at least 1/4 second. On top of that implement various bits to ensure that the encoder has been run once before digital streaming for OnAir devices. This is done via several core state machine tweaks. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7709): pvrusb2: New device attribute for encoder usage in digital modeMike Isely
Some tuners seem to not work in digital mode unless the encoder is healthy. Implement a device attribute to represent this flag and modify the core state machines to enforce this requirement. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7708): pvrusb2-dvb: Fix stuck thread on streaming abortMike Isely
If the device fails to stream, the feed thread will block forever waiting for buffers. But while in this state it was not looking for an exit condition from the driver DVB interface. This caused the thread to jam. Implement a new stop flag (which will be set appropriately) to tell the thread to stop. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7707): pvrusb2-dvb: add atsc/qam support for Hauppauge pvrusb2 ↵Michael Krufky
model 750xx Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7706): pvrusb2: create a separate pvr2_device_desc structure for ↵Michael Krufky
751xx models Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7705): pvrusb2: Enable OnAir digital operationMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7704): pvrusb2: Fix slop involving use of struct which might not be ↵Mike Isely
defined When the DVB interface is not compiled, the pvr2_dvb_props struct is not available - so it really should be ifdef'ed out as well. This didn't cause an error because in this context its usage was as an opaque pointer. But it really shouldn't be present at all if DVB is not enabled. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7703): pvrusb2: Fix minor problem involving ARRAY_SIZE confusionMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7702): pvrusb2: Rework USB streaming start/stop executionMike Isely
The commands to start / stop USB streaming for an analog device are fairly standard, owing to the fact that all supported devices apparently started from the same common reference design. However with digital mode, the commands seem to vary by vendor. This change makes that variance more explicit. It also cleans up a related problem for OnAir devices which prevented digital mode from working at all. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7701): pvrusb2: Centralize handling of simple FX2 commandsMike Isely
Numerous places in the driver need to issue simple commands to the FX2 microcontroller (e.g. only 1 or 2 bytes, no reply needed). Previously each place that did this, had to take lock, set up a central buffer, and call the function to perform the handshake. This change puts these steps into a single spot. This also has the effect of removing the need to mess with the control lock from numerous places in the code. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7700): pvrusb2: Make FX2 command codes unsigned constantsMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7699): pvrusb2: Implement statistics for USB I/O performance / trackingMike Isely
Implement a mechanism in the pvrusb2 driver for gathering statistics on the stream buffering, including bytes transferred, buffers handled, buffers in flight, etc. This is useful for debugging certain classes of streaming issues and for determining if the buffer pool size is generally correct for the driver. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7698): pvrusb2: Remove never-reached break statements (trivial)Mike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7697): pvrusb2: Fix misleading bit of debug output (trivial)Mike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7696): pvrusb2: state control tweakMike Isely
Don't trigger a pathway state change if it's already been triggered (eliminates some wasted processing and some debug output noise) Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7695): pvrusb2: Make associativity of == and && explicit (cosmetic)Mike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7694): pvrusb2: Fix compilation goof when CONFIG_VIDEO_PVRUSB2_DVB ↵Mike Isely
is off Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7693): pvrusb2-dvb: Change usage of 0 --> NULLMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7692): pvrusb2-dvb: Further clean up dvb init/tear-downMike Isely
Move pvr2_dvb_adapter usage out of the pvrusb2 driver core - it's really private to the pvrusb2-dvb module and nothing outside of the dvb implementation should care about it. Creation / destruction of the pvr2_dvb_adapter instance is now contained entirely within pvrusb2-dvb.c. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7691): pvrusb2-dvb: Don't initialize if device lacks a digital sideMike Isely
In the end we'd like the dvb interface to always be present - even for analog devices (via the mpeg encoder). However right now pvrusb2-dvb won't operate correctly if the hardware doesn't have a digital tuner, so don't initialize the DVB interface unless we know we have a digital tuner. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7690): pvrusb2-dvb: Remove digital_up flagMike Isely
Other pvrusb2-dvb changes have made the digital_up flag obsolete. So kill it. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7689): pvrusb2-dvb: Rework module tear-downMike Isely
Rather than making an explicit call to tear down the pvrusb2-dvb module, use the callback in the pvr2_channel structure. This has the advantage that now tear-down only happens when it makes sense. The previous implementation had scenarios where it was possible for the tear-down call to happen without a prior initialization. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-16 09:10:57 +0000