summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2012-10-01rbd: assign header name laterAlex Elder
Move the assignment of the header name for an rbd image a bit later, outside rbd_add_parse_args() and into its caller. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: use snaps list in rbd_snap_by_name()Alex Elder
An rbd_dev structure maintains a list of current snapshots that have already been fully initialized. The entries on the list have type struct rbd_snap, and each entry contains a copy of information that's found in the rbd_dev's snapshot context and header. The only caller of snap_by_name() is rbd_header_set_snap(). In that call site any positive return value (the index in the snapshot array) is ignored, so there's no need to return the index in the snapshot context's id array when it's found. rbd_header_set_snap() also has only one caller--rbd_add()--and that call is made after a call to rbd_dev_snap_devs_update(). Because the rbd_snap structures are initialized in that function, the current snapshot list can be used instead of the snapshot context to look up a snapshot's information by name. Change snap_by_name() so it uses the snapshot list rather than the rbd_dev's snapshot context in looking up snapshot information. Return 0 if it's found rather than the snapshot id. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: don't register snapshots in bus_add_dev()Alex Elder
When rbd_bus_add_dev() is called (one spot--in rbd_add()), the rbd image header has not even been read yet. This means that the list of snapshots will be empty at the time of the call. As a result, there is no need for the code that calls rbd_register_snap_dev() for each entry in that list--so get rid of it. Once the header has been read (just after returning), a call will be made to rbd_dev_snap_devs_update(), which will then find every snapshot in the context to be new and will therefore call rbd_register_snap_dev() via __rbd_add_snap_dev() accomplishing the same thing. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: move locking out of rbd_header_set_snap()Alex Elder
Move the calls to get the header semaphore out of rbd_header_set_snap() and into its caller. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: simplify rbd_init_disk() a bitAlex Elder
This just simplifies a few things in rbd_init_disk(), now that the previous patch has moved a bunch of initialization code out if it. Done separately to facilitate review. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: do some header initialization earlierAlex Elder
Move some of the code that initializes an rbd header out of rbd_init_disk() and into its caller. Move the code at the end of rbd_init_disk() that sets the device capacity and activates the Linux device out of that function and into the caller, ensuring we still have the disk size available where we need it. Update rbd_free_disk() so it still aligns well as an inverse of rbd_init_disk(), moving the rbd_header_free() call out to its caller. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: simplify snap_by_name() interfaceAlex Elder
There is only one caller of snap_by_name(), and it passes two values to be assigned, both of which are found within an rbd device structure. Change the interface so it just passes the address of the rbd_dev, and make the assignments to its fields directly. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: set mapping name with the restAlex Elder
With the exception of the snapshot name, all of the mapping-specific fields in an rbd device structure are set in rbd_header_set_snap(). Pass the snapshot name to be assigned into rbd_header_set_snap() to keep all of the mapping assignments together. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: return snap name from rbd_add_parse_args()Alex Elder
This is the first of two patches aimed at isolating the code that sets the mapping information into a single spot. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: record mapped sizeAlex Elder
Add the size of the mapped image to the set of mapping-specific fields in an rbd_device, and use it when setting the capacity of the disk. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: separate mapping info in rbd_devAlex Elder
Several fields in a struct rbd_dev are related to what is mapped, as opposed to the actual base rbd image. If the base image is mapped these are almost unneeded, but if a snapshot is mapped they describe information about that snapshot. In some contexts this can be a little bit confusing. So group these mapping-related field into a structure to make it clear what they are describing. This also includes a minor change that rearranges the fields in the in-core image header structure so that invariant fields are at the top, followed by those that change. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: kill rbd_image_header->total_snapsAlex Elder
The "total_snaps" field in an rbd header structure is never any different from the value of "num_snaps" stored within a snapshot context. Avoid any confusion by just using the value held within the snapshot context, and get rid of the "total_snaps" field. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: kill rbd_dev->qAlex Elder
A copy of rbd_dev->disk->queue is held in rbd_dev->q, but it's never actually used. So get just get rid of the field. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: rename __rbd_init_snaps_header()Alex Elder
The name __rbd_init_snaps_header() doesn't really convey what that function does very well. Its purpose is to scan a new snapshot context and either create or destroy snapshot device entries so that local host's view is consistent with the reality maintained on the OSDs. This patch just changes the name of this function, to be rbd_dev_snap_devs_update(). Still not perfect, but I think better. Also add some dynamic debug statements to this function. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: rename rbd_id_get()Alex Elder
This should have been done as part of this commit: commit de71a2970d57463d3d965025e33ec3adcf391248 Author: Alex Elder <elder@inktank.com> Date: Tue Jul 3 16:01:19 2012 -0500 rbd: rename rbd_device->id rbd_id_get() is assigning the rbd_dev->dev_id field. Change the name of that function as well as rbd_id_put() and rbd_id_max to reflect what they are affecting. Add some dynamic debug statements related to rbd device id activity. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: define rbd_assert()Alex Elder
Define rbd_assert() and use it in place of various BUG_ON() calls now present in the code. By default assertion checking is enabled; we want to do this differently at some point. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: split up rbd_get_segment()Alex Elder
There are two places where rbd_get_segment() is called. One, in rbd_rq_fn(), only needs to know the length within a segment that an I/O request should be. The other, in rbd_do_op(), also needs the name of the object and the offset within it for the I/O request. Split out rbd_segment_name() into three dedicated functions: - rbd_segment_name() allocates and formats the name of the object for a segment containing a given rbd image offset - rbd_segment_offset() computes the offset within a segment for a given rbd image offset - rbd_segment_length() computes the length to use for I/O within a segment for a request, not to exceed the end of a segment object. In the new functions be a bit more careful, checking for possible error conditions: - watch for errors or overflows returned by snprintf() - catch (using BUG_ON()) potential overflow conditions when computing segment length Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: check for overflow in rbd_get_num_segments()Alex Elder
It is possible in rbd_get_num_segments() for an overflow to occur when adding the offset and length. This is easily avoided. Since the function returns an int and the one caller is already prepared to handle errors, have it return -ERANGE if overflow would occur. The overflow check would not work if a zero-length request was being tested, so short-circuit that case, returning 0 for the number of segments required. (This condition might be avoided elsewhere already, I don't know.) Have the caller end the request if either an error or 0 is returned. The returned value is passed to __blk_end_request_all(), meaning a 0 length request is not treated an error. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: drop needless test in rbd_rq_fn()Alex Elder
There's a test for null rq pointer inside the while loop in rbd_rq_fn() that's not needed. That same test already occurred in the immediatly preceding loop condition test. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: bio_chain_clone() cleanupsAlex Elder
In bio_chain_clone(), at the end of the function the bi_next field of the tail of the new bio chain is nulled. This isn't necessary, because if "tail" is non-null, its value will be the last bio structure allocated at the top of the while loop in that function. And before that structure is added to the end of the new chain, its bi_next pointer is always made null. While touching that function, clean a few other things: - define each local variable on its own line - move the definition of "tmp" to an inner scope - move the modification of gfpmask closer to where it's used - rearrange the logic that sets the chain's tail pointer Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: kill notify_timeout optionAlex Elder
The "notify_timeout" rbd device option is never used, so get rid of it. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: add read_only rbd map optionAlex Elder
Add the ability to map an rbd image read-only, by specifying either "read_only" or "ro" as an option on the rbd "command line." Also allow the inverse to be explicitly specified using "read_write" or "rw". Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: move rbd_opts to struct rbd_deviceAlex Elder
The rbd options don't really apply to the ceph client. So don't store a pointer to it in the ceph_client structure, and put them (a struct, not a pointer) into the rbd_dev structure proper. Pass the rbd device structure to rbd_client_create() so it can assign rbd_dev->rbdc if successful, and have it return an error code instead of the rbd client pointer. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: more cleanup in rbd_header_from_disk()Alex Elder
This just rearranges things a bit more in rbd_header_from_disk() so that the snapshot sizes are initialized right after the buffer to hold them is allocated and doing a little further consolidation that follows from that. Also adds a few simple comments. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: kill incore snap_names_lenAlex Elder
The only thing the on-disk snap_names_len field is needed is to size the buffer allocated to hold a copy of the snapshot names for an rbd image. So don't bother saving it in the in-core rbd_image_header structure. Just use a local variable to hold the required buffer size while it's needed. Move the code that actually copies the snapshot names up closer to where the required length is saved. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: don't over-allocate space for object prefixAlex Elder
In rbd_header_from_disk() the object prefix buffer is sized based on the maximum size it's block_name equivalent on disk could be. Instead, only allocate enough to hold null-terminated string from the on-disk header--or the maximum size of no NUL is found. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: handle locking inside __rbd_client_find()Alex Elder
There is only caller of __rbd_client_find(), and it somewhat clumsily gets the appropriate lock and gets a reference to the existing ceph_client structure if it's found. Instead, have that function handle its own locking, and acquire the reference if found while it holds the lock. Drop the underscores from the name because there's no need to signify anything special about this function. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01rbd: add new snapshots at the tailAlex Elder
This fixes a bug that went in with this commit: commit f6e0c99092cca7be00fca4080cfc7081739ca544 Author: Alex Elder <elder@inktank.com> Date: Thu Aug 2 11:29:46 2012 -0500 rbd: simplify __rbd_init_snaps_header() The problem is that a new rbd snapshot needs to go either after an existing snapshot entry, or at the *end* of an rbd device's snapshot list. As originally coded, it is placed at the beginning. This was based on the assumption the list would be empty (so it wouldn't matter), but in fact if multiple new snapshots are added to an empty list in one shot the list will be non-empty after the first one is added. This addresses http://tracker.newdream.net/issues/3063 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: rename block_name -> object_prefixAlex Elder
In the on-disk image header structure there is a field "block_name" which represents what we now call the "object prefix" for an rbd image. Rename this field "object_prefix" to be consistent with modern usage. This appears to be the only remaining vestige of the use of "block" in symbols that represent objects in the rbd code. This addresses http://tracker.newdream.net/issues/1761 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Dan Mick <dan.mick@inktank.com>
2012-10-01rbd: separate reading header from decoding itAlex Elder
Right now rbd_read_header() both reads the header object for an rbd image and decodes its contents. It does this repeatedly if needed, in order to ensure a complete and intact header is obtained. Separate this process into two steps--reading of the raw header data (in new function, rbd_dev_v1_header_read()) and separately decoding its contents (in rbd_header_from_disk()). As a result, the latter function no longer requires its allocated_snaps argument. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: expand rbd_dev_ondisk_valid() checksAlex Elder
Add checks on the validity of the snap_count and snap_names_len field values in rbd_dev_ondisk_valid(). This eliminates the need to do them in rbd_header_from_disk(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: return earlier in rbd_header_from_disk()Alex Elder
The only caller of rbd_header_from_disk() is rbd_read_header(). It passes as allocated_snaps the number of snapshots it will have received from the server for the snapshot context that rbd_header_from_disk() is to interpret. The first time through it provides 0--mainly to extract the number of snapshots from the snapshot context header--so that it can allocate an appropriately-sized buffer to receive the entire snapshot context from the server in a second request. rbd_header_from_disk() will not fill in the array of snapshot ids unless the number in the snapshot matches the number the caller had allocated. This patch adjusts that logic a little further to be more efficient. rbd_read_header() doesn't even examine the snapshot context unless the snapshot count (stored in header->total_snaps) matches the number of snapshots allocated. So rbd_header_from_disk() doesn't need to allocate or fill in the snapshot context field at all in that case. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: rearrange rbd_header_from_disk()Alex Elder
This just moves code around for the most part. It was pulled out as a separate patch to avoid cluttering up some upcoming patches which are more substantive. The point is basically to group everything related to initializing the snapshot context together. The only functional change is that rbd_header_from_disk() now ensures the (in-core) header it is passed is zero-filled. This allows a simpler error handling path in rbd_header_from_disk(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: use sizeof (object) instead of sizeof (type)Alex Elder
Fix a few spots in rbd_header_from_disk() to use sizeof (object) rather than sizeof (type). Use a local variable to record sizes to shorten some lines and improve readability. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: ensure invalid pointers are made nullAlex Elder
Fix a number of spots where a pointer value that is known to have become invalid but was not reset to null. Also, toss in a change so we use sizeof (object) rather than sizeof (type). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: make snap_names_len a u64Alex Elder
The snap_names_len field of an rbd_image_header structure is defined with type size_t. That field is used as both the source and target of 64-bit byte-order swapping operations though, so it's best to define it with type u64 instead. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01rbd: simplify __rbd_init_snaps_header()Alex Elder
The purpose of __rbd_init_snaps_header() is to compare a new snapshot context with an rbd device's list of existing snapshots. It updates the list by adding any new snapshots or removing any that are not present in the new snapshot context. The code as written is a little confusing, because it traverses both the existing snapshot list and the set of snapshots in the snapshot context in reverse. This was done based on an assumption about snapshots that is not true--namely that a duplicate snapshot name could cause an error in intepreting things if they were not processed in ascending order. These precautions are not necessary, because: - all snapshots are uniquely identified by their snapshot id - a new snapshot cannot be created if the rbd device has another snapshot with the same name (It is furthermore not currently possible to rename a snapshot.) This patch re-implements __rbd_init_snaps_header() so it passes through both the existing snapshot list and the entries in the snapshot context in forward order. It still does the same thing as before, but I find the logic considerably easier to understand. By going forward through the names in the snapshot context, there is no longer a need for the rbd_prev_snap_name() helper function. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
2012-10-01Merge tag 'staging-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree update from Greg Kroah-Hartman: "Here is the big staging tree update for the 3.7-rc1 merge window. There are a few patches in here that are outside of the staging area, namely HID and IIO patches, but all of them have been acked by the relevant subsystem maintainers. The IIO stuff is still coming in through this tree as it hasn't entirely moved out of the staging tree, but is almost there. Other than that, there wa a ton of work on the comedi drivers to make them more readable and the correct style. Doing that removed a lot of code, but we added a new driver to the staging tree, so we didn't end up with a net reduction this time around: 662 files changed, 51649 insertions(+), 26582 deletions(-) All of these patches have been in the linux-next tree already. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits) staging: comedi: jr3_pci: fix iomem dereference staging: comedi: drivers: use comedi_fc.h cmdtest helpers Staging: winbond: usb_free_urb(NULL) is safe Staging: winbond: checkpatch cleanup Staging: winbond: Removed undesired spaces, lines and tabs Staging: winbond: Typo corrections in comments Staging: winbond: Changed c99 comments to c89 comments staging: r8712u: Do not queue cloned skb staging: comedi: ni_mio_common: always lock in ni_ai_poll() staging: comedi: s626: add FIXME comment staging: comedi: s626: don't dereference insn->data staging: comedi: s526: fix if() check in s526_gpct_winsn() staging: comedi: s626: cleanup comments in s626_initialize() staging: comedi: s626: remove clear of kzalloc'ed data staging: comedi: s626: remove 'WDInterval' from private data staging: comedi: s626: remove 'ChargeEnabled' from private data staging: comedi: s626: remove 'IsBoardRevA' comment staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND" staging: comedi: s626: remove 'allocatedBuf' from private data staging: comedi: s626: add final attach message ...
2012-10-01Merge tag 'driver-core-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core merge from Greg Kroah-Hartman: "Here is the big driver core update for 3.7-rc1. A number of firmware_class.c updates (as you saw a month or so ago), and some hyper-v updates and some printk fixes as well. All patches that are outside of the drivers/base area have been acked by the respective maintainers, and have all been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits) memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl() device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit] Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit dev: Add dev_vprintk_emit and dev_printk_emit netdev_printk/netif_printk: Remove a superfluous logging colon netdev_printk/dynamic_netdev_dbg: Directly call printk_emit dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack driver-core: Shut up dev_dbg_reatelimited() without DEBUG tools/hv: Parse /etc/os-release tools/hv: Check for read/write errors tools/hv: Fix exit() error code tools/hv: Fix file handle leak Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO Tools: hv: Rename the function kvp_get_ip_address() Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO Tools: hv: Add an example script to configure an interface ...
2012-10-01Merge tag 'char-misc-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver merge from Greg Kroah-Hartman: "Here is the "big" char/misc driver tree update for the 3.7-rc1 merge window. Nothing major, just a number of driver updates and fixes, all of which have been in the linux-next releases for a while now either in my tree, or in Andrew's (the lis3l driver changes came from his tree last week). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (52 commits) drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree init drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree init drivers/misc/lis3lv02d: remove lis3lv02d driver DT init drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code drivers/misc/lis3lv02d: add generic DT matching code lis3lv02d: fix some comments specific to lis331dlh driver MISC: hpilo, remove pci_disable_device pcmcia: synclink_cs: fix potential tty NULL dereference drivers/char/mmtimer.c: Remove useless kfree drivers/char: removes unnecessary semicolon char/misc: remove CONFIG_EXPERIMENTAL dependencies mei: don't print buffer as a string mei: struct mei_message_data doesn't have to be packed mei: add error messages for open count errors misc: use module_spi_driver tifm: use module_pci_driver misc/at25, dt: Improve at25 SPI eeprom device tree bindings. mei: add lynx point pci device ids mei: fix max number of open handles mei: rename struct pci_dev *mei_device to mei_pdev ...
2012-10-01Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clk framework update from Michael Turquette: "The common clk framework changes for 3.7 are dominated by ARM platform ports to the framework along with one MIPS port, one MFD port, one minor framework enhancement and one helper function for platforms expressing their clock data through device tree." * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: add of_clk_src_onecell_get() support clk: ux500: Define smp_twd clock for u8500 mfd: dbx500: Provide a more accurate smp_twd clock clk: ux500: Support for prmcu_rate clock clk: Provide option for clk_get_rate to issue hw for new rate clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator. ARM: ux500: Switch to use common clock framework clk: ux500: Clock definitions for u8500 clk: ux500: First version of clock definitions for ux500 clk: ux500: Adapt PRCMU and PRCC clocks for common clk clk: versatile: make config option boolean clk: add Loongson1B clock support arm: mmp: make all SOCs use common clock by default clk: mmp: add clock definition for mmp2 clk: mmp: add clock definition for pxa910 clk: mmp: add clock definition for pxa168 clk: mmp: add mmp specific clocks clk: convert ARM RealView to common clk clk: prima2: move from arch/arm/mach to drivers/clk ARM: PRIMA2: convert to common clk and finish full clk tree
2012-10-01Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
2012-10-01Merge tag 'arm64-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 support from Catalin Marinas: "Linux support for the 64-bit ARM architecture (AArch64) Features currently supported: - 39-bit address space for user and kernel (each) - 4KB and 64KB page configurations - Compat (32-bit) user applications (ARMv7, EABI only) - Flattened Device Tree (mandated for all AArch64 platforms) - ARM generic timers" * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (35 commits) arm64: ptrace: remove obsolete ptrace request numbers from user headers arm64: Do not set the SMP/nAMP processor bit arm64: MAINTAINERS update arm64: Build infrastructure arm64: Miscellaneous header files arm64: Generic timers support arm64: Loadable modules arm64: Miscellaneous library functions arm64: Performance counters support arm64: Add support for /proc/sys/debug/exception-trace arm64: Debugging support arm64: Floating point and SIMD arm64: 32-bit (compat) applications support arm64: User access library functions arm64: Signal handling support arm64: VDSO support arm64: System calls handling arm64: ELF definitions arm64: SMP support arm64: DMA mapping API ...
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "The main new feature is machine support for System zEC12 including transactional memory, runtime instrumentation, support for scm block devices via eadm subchannels, and support for CEX4 crypto cards. In addition there are some nice improvements: bpf jit compiler, arch backend for cmpxchg_double, relative exception table entries, dasd partition detection independent from the dasd driver ioctls, and cpu cache information in /proc/cpuinfo and /sys/device/cpu. And last but not least a series of cleanup patches from Heiko." Fix up trivial add-add conflict in arch/s390/Kconfig due to commit b952741c8079 ("cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING") * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (76 commits) s390: update defconfig s390/jump label,nss: let shared kernel support depend on !JUMP_LABEL s390/disassembler: fix decoding of risblg instruction s390/bpf,jit: add support for BPF_S_ANC_ALU_XOR_X instruction s390/traps: move call to print_modules() out of show_regs() s390/mm: mark free_initrd_mem() as __init s390/dasd: check count address during online setting drivers/s390/char/monreader.c: fix error return code s390/cmpxchg,percpu: implement cmpxchg_double() s390/percpu: implement this_cpu_add_return() s390/percpu: implement this_cpu_xchg() s390/kexec: remove CONFIG_KEXEC s390/irq: use designated initializers for irq class array s390: add uninitialized_var() to suppress false positive compiler warnings s390/crashdump: move fill_cpu_elf_notes() prototype to header file s390/process: add missing header include s390/ptrace: add missing ifdef s390/ipl,decrompressor: disable branch profiling s390/perf_events: compile only for CONFIG_64BIT s390/tape: remove even more tape block leftovers ...
2012-10-01Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/fpu update from Ingo Molnar: "The biggest change is the addition of the non-lazy (eager) FPU saving support model and enabling it on CPUs with optimized xsaveopt/xrstor FPU state saving instructions. There are also various Sparse fixes" Fix up trivial add-add conflict in arch/x86/kernel/traps.c * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kvm: fix kvm's usage of kernel_fpu_begin/end() x86, fpu: remove cpu_has_xmm check in the fx_finit() x86, fpu: make eagerfpu= boot param tri-state x86, fpu: enable eagerfpu by default for xsaveopt x86, fpu: decouple non-lazy/eager fpu restore from xsave x86, fpu: use non-lazy fpu restore for processors supporting xsave lguest, x86: handle guest TS bit for lazy/non-lazy fpu host models x86, fpu: always use kernel_fpu_begin/end() for in-kernel FPU usage x86, kvm: use kernel_fpu_begin/end() in kvm_load/put_guest_fpu() x86, fpu: remove unnecessary user_fpu_end() in save_xstate_sig() x86, fpu: drop_fpu() before restoring new state from sigframe x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels x86, fpu: Consolidate inline asm routines for saving/restoring fpu state x86, signal: Cleanup ifdefs and is_ia32, is_x32
2012-10-01Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/EFI changes from Ingo Molnar: "EFI loader robustness enhancements plus smaller fixes" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Fix the ACPI BGRT driver for images located in EFI boot services memory efi: Add a function to look up existing IO memory mappings efi: Defer freeing boot services memory until after ACPI init x86, EFI: Calculate the EFI framebuffer size instead of trusting the firmware efifb: Skip DMI checks if the bootloader knows what it's doing efi: initialize efi.runtime_version to make query_variable_info/update_capsule workable efi: Build EFI stub with EFI-appropriate options X86: Improve GOP detection in the EFI boot stub
2012-10-01[media] v4l2-ioctl.c: fix overlay supportHans Verkuil
The vidioc_overlay op needs an unsigned int, not an unsigned int pointer. So we need a small function that dereferences the unsigned int pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-mfc: Fix second memory bank alignmentKamil Debski
Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-fimc: Fix setup of initial links to FIMC entitiesSylwester Nawrocki
This patch fixes regression introduced in commit 4af813108b880e96a4b8b01e162f950a4aaa2475. Missing pointers to the sensor subdevs are restored along with subdev callback notifications to a corresponding FIMC instance driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>