summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2012-10-24b43: Fix oops on unload when firmware not foundLarry Finger
When b43 fails to find firmware when loaded, a subsequent unload will oops due to calling ieee80211_unregister_hw() when the corresponding register call was never made. Commit 2d838bb608e2d1f6cb4280e76748cb812dc822e7 fixed the same problem for b43legacy. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Markus Kanet <dvmailing@gmx.eu> Cc: Stable <stable@vger.kernel.org> [V3.3.0+ (the patch will need to be refactored)] Cc: Markus Kanet <dvmailing@gmx.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24mwifiex: clean up scan state on errorBing Zhao
De-reference and deallocate scan state on failure. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Tested-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Ryan Cairns <rtc@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24mwifiex: return -EBUSY if specific scan request cannot be honoredBing Zhao
Previous patch "mwifiex: return -EBUSY if scan request cannot.." corrected regular scan request only. There is another case for specific scan that needs the same handling. Also, removed !req_ssid check as it has already been validated by caller. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Ryan Cairns <rtc@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24brcmfmac: fix potential NULL dereferenceYuanhan Liu
Fix a samtch warnings catched by Fengguang's 0-DAY system: + drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:3572 brcmf_cfg80211_sched_scan_start() error: we previously assumed 'request' could be null (see line 3571) Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Acked-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz"Felix Fietkau
This reverts commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd. This commit is reducing tx power by at least 10 db on some devices, e.g. the Buffalo WZR-HP-G450H. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Cc: rmanohar@qca.qualcomm.com Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24ath9k_htc: Add PID/VID for a Ubiquiti WiFiStationMohammed Shafi Shajakhan
Roger says, Ubiquiti produce 2 versions of their WiFiStation USB adapter. One has an internal antenna, the other has an external antenna and name suffix EXT. They have separate USB ids and in distribution openSUSE 12.2 (kernel 3.4.6), file /usr/share/usb.ids shows: 0cf3 Atheros Communications, Inc. ... b002 Ubiquiti WiFiStation 802.11n [Atheros AR9271] b003 Ubiquiti WiFiStationEXT 802.11n [Atheros AR9271] Add b002 Ubiquiti WiFiStation in the PID/VID list. Reported-by: Roger Price <ath9k@rogerprice.org> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24rt2x00: usb: fix reset resumeStanislaw Gruszka
Patch fixes warnings like below happened on resume: WARNING: at net/mac80211/driver-ops.h:12 check_sdata_in_driver+0x32/0x34() Problem is that in __ieee80211_susped() we remove sdata (i.e wlan0 interface) and then during resume we call usb_unbind_interface() -> ieee80211_unregister_hw() with sdata removed. Patch fixes problem by adding .reset_resume calback, hence we do not unbind usb device on resume. This callback can be the same as normal .resume callback, sice we do all needed initalization during interface start, which is performed on resume [ ieee80211_resume() -> ieee80211_reconfig() -> rt2x00mac_start() -> rt2x00lib_start ]. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=48041 Reported-by: David Herrmann <dh.herrmann@googlemail.com> Reported-and-tested-by: Stephen Boyd <bebarino@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24rtlwifi: pass rx setup error code to callerChristian Lamparter
If _rtl_usb_receive fails, the device is probably not ready. Hence the error code should be passed to the caller, so it can react accordingly and notify the user. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24drm/radeon: fix ATPX regression in acpi reworkAlex Deucher
Copy and paste typo in the apci rework. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=49351 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-10-24drm/radeon: fix ATPX function documentationAlex Deucher
The ATPX code no longer handles ATRM. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-24drm/radeon: move the retry to gem_object_createChristian König
When internal users want VRAM we shouldn't return GART memory instead. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-24drm/radeon: move size limits to gem_object_create.Christian König
Driver internal users shouldn't be limited in their allocation size. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-24drm/radeon: use vzalloc for gart pagesChristian König
When allocating more than 2GB of GART the array of pages gets to big for kzalloc, use vzalloc instead. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-24drm/radeon: fix and simplify pot argument checks v3Christian König
GART and VRAM size limits need to be a power of two. Fix values greater than 1GB and simplify those checks a bit. v2: also fix radeon_vram_limit usage, and simplify test even more. v3: agd5f: fix spelling as noticed by Klaus Schnass Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-24iommu/tegra: smmu: Fix deadly typoHiro Sugawara
Fix a deadly typo in macro definition. Cc: stable@vger.kernel.org Signed-off-by: Hiro Sugawara <hsugawara@nvidia.com> Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-10-24amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[]Andrew Morton
If none of the elements in scrubrates[] matches, this loop will cause __amd64_set_scrub_rate() to incorrectly use the n+1th element. As the function is designed to use the final scrubrates[] element in the case of no match, we can fix this bug by simply terminating the array search at the n-1th element. Boris: this code is fragile anyway, see here why: http://marc.info/?l=linux-kernel&m=135102834131236&w=2 It will be rewritten more robustly soonish. Reported-by: Denis Kirjanov <kirjanov@gmail.com> Cc: stable@vger.kernel.org Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-24drm/i915: clear the entire sdvo infoframe bufferDaniel Vetter
Like in the case of native hdmi, which is fixed already in commit adf00b26d18e1b3570451296e03bcb20e4798cdd Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Tue Sep 25 13:23:34 2012 -0300 drm/i915: make sure we write all the DIP data bytes we need to clear the entire sdvo buffer to avoid upsetting the display. Since infoframe buffer writing is now a bit more elaborate, extract it into it's own function. This will be useful if we ever get around to properly update the ELD for sdvo. Also #define proper names for the two buffer indexes with fixed usage. v2: Cite the right commit above, spotted by Paulo Zanoni. v3: I'm too stupid to paste the right commit. v4: Ben Hutchings noticed that I've failed to handle an underflow in my loop logic, breaking it for i >= length + 8. Since I've just lost C programmer license, use his solution. Also, make the frustrated 0-base buffer size a notch more clear. Reported-and-tested-by: Jürg Billeter <j@bitron.ch> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732 Cc: stable@vger.kernel.org Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Ben Hutchings <ben@decadent.org.uk> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-24dmaengine: sirf: fix a typo in moving running dma_desc to active queueBarry Song
list_move_tail(&schan->queued, &schan->active) makes the list_empty(schan->queued) undefined, we either should change it to: list_move_tail(schan->queued.next, &schan->active) or list_move_tail(&sdesc->node, &schan->active) Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-24dmaengine: sirf: fix a typo in dma_prep_interleavedBarry Song
either DEV_TO_MEM or MEM_TO_DEV is supported, so change OR to AND. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-24can: sja1000: fix/add miniPCIe/cPCI PC/104Plus PCI/104e PEAK-System boardsStephane Grosjean
This patch adds the support for 4 new PCI boards based on the SJA1000 CAN controller, from PEAK-System Technik: . PCAN-miniPCIe (PCI-Express Mini slots, available as single or dual-channel) . PCAN-cPCI (CompactPCI format, available as single or dual-channel) . PCAN-PC/104-Plus (PC/104-Plus system, av. as 1, 2 or 4 channels) . PCAN-PCI/104-Express (PCI/104-Express system, av. as 1 or 2 channels) This patch also fixes a typo in existing "PEAK_MPCI_DEVICE_ID" identifier (missing "e" for Express). Finally, it also changes the author as well as it updates the module supported devices list. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-24gpio: mvebu: correctly set the value in direction_output()Thomas Petazzoni
The ->direction_output() operation of gpio_chip is supposed to set the direction to output but also to set the GPIO to an initial value. Unfortunately, this last part was not done until now, causing for example the LEDs to not be properly set to their default initial value. This patch fixes this by calling the mvebu_gpio_set() function from mvebu_gpio_direction_output() before configuring the GPIO as an output GPIO. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-24dmaengine: imx-dma: fix missing unlock on error in imxdma_xfer_desc()Wei Yongjun
Add the missing unlock on the error handling path in function imxdma_xfer_desc(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-23usb hub: use flush_work instead of flush_work_syncOctavian Purdila
flush_work_sync and flush_work are now the same and flush_work_sync has been deprecated. This fixes the following warning: drivers/usb/core/hub.c: In function hub_quiesce: drivers/usb/core/hub.c:1216:3: warning: flush_work_sync is deprecated (declared at include/linux/workqueue.h:448) [-Wdeprecated-declarations] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-23USB: Add missing license tag to ezusb driver.Dave Jones
ezusb: module license 'unspecified' taints kernel Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-23Merge tag 'for-usb-linus-2012-10-23' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus xHCI fixes for 3.7-rc3 Hi Greg, Here's four bug fixes for 3.7. The first patch fixes a potential deadlock in the USB port power off code, and the last two patches fix bugs in the USB 3.0 Link PM patchset. The second one is trivial and removes an unnecessary cast. Sarah Sharp
2012-10-23Merge tag 'fixes-for-v3.7-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus usb: fixes for v3.7-rc3 Here's a new set of fixes for v3.7-rc3. It's quite small, only four patches. There's one bug fix for the newly added musb-dsps glue layer where we could be overflowing a buffer when creating the instance name. NET2272 got a fix for a case where the lock would be left held when exiting the IRQ handler with error in case of Spurious IRQs. Renensas USBHS got a DMA stall fix which would cause transfers to stall forever and a NULL pointer deref fix in case of pipe detach.
2012-10-24Merge tag 'stable/for-linus-3.7-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen bug-fixes from Konrad Rzeszutek Wilk: - Fix mysterious SIGSEGV or SIGKILL in applications due to corrupting of the %eip when returning from a signal handler. - Fix various ARM compile issues after the merge fallout. - Continue on making more of the Xen generic code usable by ARM platform. - Fix SR-IOV passthrough to mirror multifunction PCI devices. - Fix various compile warnings. - Remove hypercalls that don't exist anymore. * tag 'stable/for-linus-3.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: dbgp: Fix warning when CONFIG_PCI is not enabled. xen: arm: comment on why 64-bit xen_pfn_t is safe even on 32 bit xen: balloon: use correct type for frame_list xen/x86: don't corrupt %eip when returning from a signal handler xen: arm: make p2m operations NOPs xen: balloon: don't include e820.h xen: grant: use xen_pfn_t type for frame_list. xen: events: pirq_check_eoi_map is X86 specific xen: XENMEM_translate_gpfn_list was remove ages ago and is unused. xen: sysfs: fix build warning. xen: sysfs: include err.h for PTR_ERR etc xen: xenbus: quirk uses x86 specific cpuid xen PV passthru: assign SR-IOV virtual functions to separate virtual slots xen/xenbus: Fix compile warning. xen/x86: remove duplicated include from enlighten.c
2012-10-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Among the usual minor bug fixes the more interesting patches are the perf counters for the latest machine, the missing select to enable transparent huge pages and a build fix for the UAPI rework." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390,uapi: do not use uapi/asm-generic/kvm_para.h s390/cache: fix data/instruction cache output s390: fix linker script for 31 bit builds s390/thp: select HAVE_ARCH_TRANSPARENT_HUGEPAGE s390/kdump: Use 64 bit mode for 0x10000 entry point perf_cpum_cf: Add support for counters available with IBM zEC12 s390/css: stop stsch loop after cc 3 s390/cio: use generic bitmap functions s390/chpid: make headers usable (again)
2012-10-23xhci: fix integer overflowOliver Neukum
xhci_service_interval_to_ns() returns long long to avoid an overflow. However, the type cast happens too late. The fix is to force ULL from the beginning. This patch should be backported to kernels as old as 3.5, that contain the commit e3567d2c15a7a8e2f992a5f7c7683453ca406d82 "xhci: Add Intel U1/U2 timeout policy." Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: stable@vger.kernel.org
2012-10-23xhci: endianness xhci_calculate_intel_u2_timeoutOliver Neukum
An le16 is accessed without conversion. This patch should be backported to kernels as old as 3.5, that contain the commit e3567d2c15a7a8e2f992a5f7c7683453ca406d82 "xhci: Add Intel U1/U2 timeout policy." Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: stable@vger.kernel.org
2012-10-23drivers/block: remove CONFIG_EXPERIMENTALKees Cook
This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Asai Thambi S P <asamymuthupa@micron.com> CC: Pete Zaitcev <zaitcev@redhat.com> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-23can: flexcan: disable bus error interrupts for the i.MX6qWolfgang Grandegger
This patch adds some Flexcan version info and removes the feature flag FLEXCAN_HAS_BROKEN_ERR_STATE for the i.MX6Q. It also has the line [TR]WRN_INT properly connected. Cc: Hui Wang <jason77.wang@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> [mkl: convert to incremental patch] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-23Merge branches 'cxgb4' and 'mlx4' into for-nextRoland Dreier
2012-10-23mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER() failsDotan Barak
Fixed the resource cleanup to act correctly and prevent a kernel oops when mlx4_QUERY_ADAPTER() fails. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-23mlx4_core: Remove annoying debug messages from SR-IOV flowOr Gerlitz
These debug prints left behind by commits c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests"), 54679e148287 ("mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop") and 993c401e2079 ("mlx4_core: Add IB port-state machine and port mgmt event propagation") make it pretty hard to actually use the mlx4_core debug messages when running in SRIOV/IB mode -- for example, the module load sequence of a device with one VF yielded 631 debug prints, with 408 of them being from this set. Let's just remove them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-23drm/radeon: fix header size estimation in VM codeChristian König
Only NI uses 3dw headers, SI uses 4dw headers. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-23drm/radeon: remove set_page check from VM codeChristian König
It's better to handle this in the chipset specific code. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-23drm/radeon: fix si_set_page v2Christian König
Handle requests that won't fit into a single packet. v2: pe needs to increase as well. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-23drm/radeon: fix cayman_vm_set_page v2Christian König
Handle requests that won't fit into a single packet. v2: pe needs to increase as well. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-23drm/radeon: fix PFP sync in vm_flushChristian König
Otherwise the next IB might start reading commands with the page table still invalid. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-23drm/radeon: add error output if VM CS fails on caymanAlex Deucher
So we know why the CS was rejected. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-10-23drm/radeon: give each backlight a unique idAlex Deucher
In cases where we have multiple radeons with backlight controls. Should fix: https://bugzilla.kernel.org/show_bug.cgi?id=48941 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-23drm/radeon: fix sparse warningAlex Deucher
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-10-23spi/pl022: Revert recent runtime PM changesUlf Hansson
[Originally sent by Ulf as two changes, squashed down into one with a redone changelog, thanks to Russell King for analysis. -- broonie] This reverts commit 688723 (spi/pl022: enable runtime PM) and commit 2fb30d (spi/pl022: fix spi-pl022 pm enable at probe). Commit "spi/pl022: enable runtime PM" introduced runtime PM issues as it interacted badly with the work Russell King had done to move core runtime PM handling into the bus. Due to that commit, "spi/pl022: fix spi-pl022 pm enable at probe" was merged to fix part of those issues. Instead of adding another fix, let's clean up and revert everything back to when it was already fine. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Revert "spi/pl022: enable runtime PM" Conflicts: drivers/spi/spi-pl022.c
2012-10-23drivers: cma: Fix wrong CMA selected region size default valueLaurent Pinchart
Kconfig lists CMA_SIZE_SEL_ABSOLUTE as the default value fo the CMA selected region size, but that option isn't available in the defined choices. Set the default to CMA_SIZE_SEL_MBYTES instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-10-23drivers: dma-coherent: Fix typo in dma_mmap_from_coherent documentationLaurent Pinchart
The function documentation incorrectly references dma_release_coherent. Fix it. Don't mention a specific function name as dma_mmap_from_coherent as multiple callers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-10-23drivers: dma-contiguous: Don't redefine SZ_1MLaurent Pinchart
Use the definition from linux/sizes.h instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-10-23drm/i915: VGA needs to be on pipe A on i830MDaniel Vetter
The bit doesn't stick, and the output is always cloned from pipe A, even when it's supposed to scan out from pipe B. Shuts up annoying warnings from the modeset-rework, too. I've noticed that with this patch we know get and unknown connection state since the code can't find a suitable pipe for load detection. But that beats the previous state of affairs, where it tried to use pipe B, actually used pipe A and concluded that something is connected (although it's the LVDS on pipe A and nothing on the VGA connector on pipe B). I've tried to make load detect work by remapping the pipe->planes stuff, so that crtc 0 will use pipe B and hence we still have something left for load-detect on pipe A. But alas, that upset the hw a bit. So there's still some things to figure out, but this here will at least paper over some of the problems. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51265 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: extend the commit message a bit with recent observations.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-23drm/i915: fix overlay on i830MDaniel Vetter
The overlay on the i830M has a peculiar failure mode: It works the first time around after boot-up, but consistenly hangs the second time it's used. Chris Wilson has dug out a nice errata: "1.5.12 Clock Gating Disable for Display Register Address Offset: 06200h–06203h "Bit 3 Ovrunit Clock Gating Disable. 0 = Clock gating controlled by unit enabling logic 1 = Disable clock gating function DevALM Errata ALM049: Overlay Clock Gating Must be Disabled: Overlay & L2 Cache clock gating must be disabled in order to prevent device hangs when turning off overlay.SW must turn off Ovrunit clock gating (6200h) and L2 Cache clock gating (C8h)." Now I've nowhere found that 0xc8 register and hence couldn't apply the l2 cache workaround. But I've remembered that part of the magic that the OVERLAY_ON/OFF commands are supposed to do is to rearrange cache allocations so that the overlay scaler has some scratch space. And while pondering how that could explain the hang the 2nd time we enable the overlay, I've remembered that the old ums overlay code did _not_ issue the OVERLAY_OFF cmd. And indeed, disabling the OFF cmd results in the overlay working flawlessly, so I guess we can workaround the lack of the above workaround by simply never disabling the overlay engine once it's enabled. Note that we have the first part of the above w/a already implemented in i830_init_clock_gating - leave that as-is to avoid surprises. v2: Add a comment in the code. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47827 Cc: stable@vger.kernel.org Tested-by: Rhys <rhyspuk@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-23pinctrl/nomadik: pass DT node to the irqdomainLinus Walleij
When creating the simple irqdomain, pass the DT node pointer along, as is apropriate. Acked-by: Lee Jones <lee.jones@linaro.org> Reported-by: Gabriel Fernandez <gabriel.fernandez@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>