summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2013-01-03cpuidle / coupled: fix ready counter decrementSivaram Nair
The ready_waiting_counts atomic variable is compared against the wrong online cpu count. The latter is computed incorrectly using logical-OR instead of bit-OR. This patch fixes that. Signed-off-by: Sivaram Nair <sivaramn@nvidia.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Colin Cross <ccross@android.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-03cpuidle: Fix finding state with min power_usageSivaram Nair
Since cpuidle_state.power_usage is a signed value, use INT_MAX (instead of -1) to init the local copies so that functions that tries to find cpuidle states with minimum power usage works correctly even if they use non-negative values. Signed-off-by: Sivaram Nair <sivaramn@nvidia.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-02Merge branch 'fixes-for-3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED fix from Bryan Wu. * 'fixes-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: leds-gpio: set devm_gpio_request_one() flags param correctly
2013-01-02leds: leds-gpio: set devm_gpio_request_one() flags param correctlyJavier Martinez Canillas
commit a99d76f leds: leds-gpio: use gpio_request_one changed the leds-gpio driver to use gpio_request_one() instead of gpio_request() + gpio_direction_output() Unfortunately, it also made a semantic change that breaks the leds-gpio driver. The gpio_request_one() flags parameter was set to: GPIOF_DIR_OUT | (led_dat->active_low ^ state) Since GPIOF_DIR_OUT is 0, the final flags value will just be the XOR'ed value of led_dat->active_low and state. This value were used to distinguish between HIGH/LOW output initial level and call gpio_direction_output() accordingly. With this new semantic gpio_request_one() will take the flags value of 1 as a configuration of input direction (GPIOF_DIR_IN) and will call gpio_direction_input() instead of gpio_direction_output(). int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) { .. if (flags & GPIOF_DIR_IN) err = gpio_direction_input(gpio); else err = gpio_direction_output(gpio, (flags & GPIOF_INIT_HIGH) ? 1 : 0); .. } The right semantic is to evaluate led_dat->active_low ^ state and set the output initial level explicitly. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reported-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-01-02Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "This fixes some small errors in the new da9055 driver, eliminates a compiler warning and adds DT support for the twl4030_wdt driver (so that we can have multiple watchdogs with DT on the omap platforms)." * git://www.linux-watchdog.org/linux-watchdog: watchdog: twl4030_wdt: add DT support watchdog: omap_wdt: eliminate unused variable and a compiler warning watchdog: da9055: Don't update wdt_dev->timeout in da9055_wdt_set_timeout error path watchdog: da9055: Fix invalid free of devm_ allocated data
2013-01-02Merge tag '3.8-pci-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Some fixes for v3.8. They include a fix for the new SR-IOV sysfs management support, an expanded quirk for Ricoh SD card readers, a Stratus DMI quirk fix, and a PME polling fix." * tag '3.8-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz PCI/PM: Do not suspend port if any subordinate device needs PME polling PCI: Add PCIe Link Capability link speed and width names PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check) PCI: Remove spurious error for sriov_numvfs store and simplify flow
2013-01-02watchdog: twl4030_wdt: add DT supportAaro Koskinen
Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to probe when booting with DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02watchdog: omap_wdt: eliminate unused variable and a compiler warningAaro Koskinen
We forgot to delete this in the commit 4f4753d9 (watchdog: omap_wdt: convert to devm_ functions), and as a result the following compilation warning was introduced: drivers/watchdog/omap_wdt.c: In function 'omap_wdt_remove': drivers/watchdog/omap_wdt.c:299:19: warning: unused variable 'res' [-Wunused-variable] Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02watchdog: da9055: Don't update wdt_dev->timeout in da9055_wdt_set_timeout ↵Axel Lin
error path Otherwise, WDIOC_GETTIMEOUT returns wrong value if set_timeout fails. This patch also removes unnecessary ret variable in da9055_wdt_ping function. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02watchdog: da9055: Fix invalid free of devm_ allocated dataAxel Lin
It is not required to free devm_ allocated data. Since kref_put needs a valid release function, da9055_wdt_release_resources() is not deleted. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-30Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull DRM update from Dave Airlie: "This is a bit larger due to me not bothering to do anything since before Xmas, and other people working too hard after I had clearly given up. It's got the 3 main x86 driver fixes pulls, and a bunch of tegra fixes, doesn't fix the Ironlake bug yet, but that does seem to be getting closer. - radeon: gpu reset fixes and userspace packet support - i915: watermark fixes, workarounds, i830/845 fix, - nouveau: nvd9/kepler microcode fixes, accel is now enabled and working, gk106 support - tegra: misc fixes." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (34 commits) Revert "drm: tegra: protect DC register access with mutex" drm: tegra: program only one window during modeset drm: tegra: clean out old gem prototypes drm: tegra: remove redundant tegra2_tmds_config entry drm: tegra: protect DC register access with mutex drm: tegra: don't leave clients host1x member uninitialized drm: tegra: fix front_porch <-> back_porch mixup drm/nve0/graph: fix fuc, and enable acceleration on all known chipsets drm/nvc0/graph: fix fuc, and enable acceleration on GF119 drm/nouveau/bios: cache ramcfg strap on later chipsets drm/nouveau/mxm: silence output if no bios data drm/nouveau/bios: parse/display extra version component drm/nouveau/bios: implement opcode 0xa9 drm/nouveau/bios: update gpio parsing apis to match current design drm/nouveau: initial support for GK106 drm/radeon: add WAIT_UNTIL to evergreen VM safe reg list drm/i915: disable shrinker lock stealing for create_mmap_offset drm/i915: optionally disable shrinker lock stealing drm/i915: fix flags in dma buf exporting drm/radeon: add support for MEM_WRITE packet ...
2012-12-30Merge tag 'omap-late-cleanups' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM cleanups for omap from Olof Johansson: "From Tony Lindgren: Here are few more patches to finish the omap changes for multiplatform conversion that are not strictly fixes, but were too complex to do with the dependencies during the merge window. Those are to move of serial-omap.h to platform_data, and the removal of remaining cpu_is_omap macro usage outside mach-omap2. Then there are several trivial fixes for typos and few minimal omap2plus_defconfig updates." * tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON OMAP2: Fix a typo - replace regist with register. ARM/omap: use module_platform_driver macro ARM: OMAP2+: PMU: Remove unused header ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support ARM: OMAP2+: enable devtmpfs and devtmpfs automount ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER ARM: OMAP2+: Drop plat/cpu.h for omap2plus ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage MAINTAINERS: Add an entry for omap related .dts files
2012-12-30Revert "drm: tegra: protect DC register access with mutex"Dave Airlie
This reverts commit 83c0bcb694be31dcd6c04bdd935b96a95a0af548. Lucas pointed out this was a mistake, and I missed the discussion, so just revert it out to save a rebase. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30drm: tegra: program only one window during modesetLucas Stach
The intention is to program exactly WIN_A, not WIN_A and possibly others. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30drm: tegra: clean out old gem prototypesLucas Stach
There is no gem.c anymore, those functions are implemented by the drm_cma_helpers now. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30drm: tegra: remove redundant tegra2_tmds_config entryLucas Stach
The 720p and 1080p entries are completely redundant, as we are matching the table entries against <=pclk. Also generalize the comment, as we are using those table entries even when driving other modes than the standard TV ones. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30drm: tegra: protect DC register access with mutexLucas Stach
Window properties are programmed through a shared aperture and have to happen atomically. Also we do the read-update-write dance on some of the shared regs. To make sure that different functions don't stumble over each other protect the register access with a mutex. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30drm: tegra: don't leave clients host1x member uninitializedLucas Stach
No real problem for now, as nothing is using this, but leaving it unitialized is asking for trouble later on. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30drm: tegra: fix front_porch <-> back_porch mixupLucas Stach
Fixes wrong picture offset observed when using HDMI output with a Technisat HD TV. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Mark Zhang <markz@nvidia.com> Tested-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-12-30Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Some fixes for 3.8: - Watermark fixups from Chris Wilson (4 pieces). - 2 snb workarounds, seem to be recently added to our internal DB. - workaround for the infamous i830/i845 hang, seems now finally solid! Based on Chris' fix for SNA, now also for UXA/mesa&old SNA. - Some more fixlets for shrinker-pulls-the-rug issues (Chris&me). - Fix dma-buf flags when exporting (you). - Disable the VGA plane if it's enabled on lid open - similar fix in spirit to the one I've sent you last weeek, BIOS' really like to mess with the display when closing the lid (awesome debug work from Krzysztof Mazur). * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: disable shrinker lock stealing for create_mmap_offset drm/i915: optionally disable shrinker lock stealing drm/i915: fix flags in dma buf exporting i915: ensure that VGA plane is disabled drm/i915: Preallocate the drm_mm_node prior to manipulating the GTT drm_mm manager drm: Export routines for inserting preallocated nodes into the mm manager drm/i915: don't disable disconnected outputs drm/i915: Implement workaround for broken CS tlb on i830/845 drm/i915: Implement WaSetupGtModeTdRowDispatch drm/i915: Implement WaDisableHiZPlanesWhenMSAAEnabled drm/i915: Prefer CRTC 'active' rather than 'enabled' during WM computations drm/i915: Clear self-refresh watermarks when disabled drm/i915: Double the cursor self-refresh latency on Valleyview drm/i915: Fixup cursor latency used for IVB lp3 watermarks
2012-12-30Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Misc fixes for reset and new packets for userspace usage. * 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add WAIT_UNTIL to evergreen VM safe reg list drm/radeon: add support for MEM_WRITE packet drm/radeon: restore modeset late in GPU reset path drm/radeon: avoid deadlock in pm path when waiting for fence drm/radeon: don't leave fence blocked process on failed GPU reset
2012-12-27Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Report i2c errors to userspace in lm73 driver - Fix problem with DIV_ROUND_CLOSEST and unsigned divisors in emc6w201 driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (emc6w201) Fix DIV_ROUND_CLOSEST problem with unsigned divisors hwmon: (lm73} Detect and report i2c bus errors
2012-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) GRE tunnel drivers don't set the transport header properly, they also blindly deref the inner protocol ipv4 and needs some checks. Fixes from Isaku Yamahata. 2) Fix sleeps while atomic in netdevice rename code, from Eric Dumazet. 3) Fix double-spinlock in solos-pci driver, from Dan Carpenter. 4) More ARP bug fixes. Fix lockdep splat in arp_solicit() and then the bug accidentally added by that fix. From Eric Dumazet and Cong Wang. 5) Remove some __dev* annotations that slipped back in, as well as all HOTPLUG references. From Greg KH 6) RDS protocol uses wrong interfaces to access scatter-gather elements, causing a regression. From Mike Marciniszyn. 7) Fix build error in cpts driver, from Richard Cochran. 8) Fix arithmetic in packet scheduler, from Stefan Hasko. 9) Similarly, fix association during calculation of random backoff in batman-adv. From Akinobu Mita. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) ipv6/ip6_gre: set transport header correctly ipv4/ip_gre: set transport header correctly to gre header IB/rds: suppress incompatible protocol when version is known IB/rds: Correct ib_api use with gs_dma_address/sg_dma_len net/vxlan: Use the underlying device index when joining/leaving multicast groups tcp: should drop incoming frames without ACK flag set netprio_cgroup: define sk_cgrp_prioidx only if NETPRIO_CGROUP is enabled cpts: fix a run time warn_on. cpts: fix build error by removing useless code. batman-adv: fix random jitter calculation arp: fix a regression in arp_solicit() net: sched: integer overflow fix CONFIG_HOTPLUG removal from networking core Drivers: network: more __dev* removal bridge: call br_netpoll_disable in br_add_if ipv4: arp: fix a lockdep splat in arp_solicit() tuntap: dont use a private kmem_cache net: devnet_rename_seq should be a seqcount ip_gre: fix possible use after free ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally ...
2012-12-26net/vxlan: Use the underlying device index when joining/leaving multicast groupsYan Burman
The socket calls from vxlan to join/leave multicast group aren't using the index of the underlying device, as a result the stack uses the first interface that is up. This results in vxlan being non functional over a device which isn't the 1st to be up. Fix this by providing the iflink field to the vxlan instance to the multicast calls. Signed-off-by: Yan Burman <yanb@mellanox.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26cpts: fix a run time warn_on.Richard Cochran
This patch fixes a warning in clk_enable by calling clk_prepare_enable instead. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26cpts: fix build error by removing useless code.Richard Cochran
The cpts driver tries to obtain the input clock frequency by calling the clock's internal 'recalc' method. Since <plat/clock.h> has been removed, this code can no longer compile. However, the driver never makes use of the frequency value, so this patch fixes the issue by removing the offending code altogether. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHzAndy Lutomirski
Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Chris Ball <cjb@laptop.org> CC: Manoj Iyer <manoj.iyer@canonical.com> CC: stable@vger.kernel.org
2012-12-26PCI/PM: Do not suspend port if any subordinate device needs PME pollingHuang Ying
Ulrich reported that his USB3 cardreader does not work reliably when connected to the USB3 port. It turns out that USB3 controller failed to awaken when plugging in the USB3 cardreader. Further experiments found that the USB3 host controller can only be awakened via polling, not via PME interrupt. But if the PCIe port to which the USB3 host controller is connected is suspended, we cannot poll the controller because its config space is not accessible when the PCIe port is in a low power state. To solve the issue, the PCIe port will not be suspended if any subordinate device needs PME polling. [bhelgaas: use bool consistently rather than mixing int/bool] Reference: http://lkml.kernel.org/r/50841CCC.9030809@uli-eckhardt.de Reported-by: Ulrich Eckhardt <usb@uli-eckhardt.de> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
2012-12-26PCI: Remove spurious error for sriov_numvfs store and simplify flowBjorn Helgaas
If we request "num_vfs" and the driver's sriov_configure() method enables exactly that number ("num_vfs_enabled"), we complain "Invalid value for number of VFs to enable" and return an error. We should silently return success instead. Also, use kstrtou16() since numVFs is defined to be a 16-bit field and rework to simplify control flow. Reported-by: Greg Rose <gregory.v.rose@intel.com> Reference: http://lkml.kernel.org/r/20121214101911.00002f59@unknown Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Donald Dutile <ddutile@redhat.com>
2012-12-23Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds
Pull i2c __dev* attribute removal from Wolfram Sang: "The squashed patches from Bill to get rid of the __dev* annotations in the i2c subsystem. I couldn't include it in my previous pull request due to some dependency with the mfd subsystem. I had this patch in linux-next for two days before rc1 and nothing popped up." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: i2c: remove __dev* attributes from subsystem
2012-12-23Partly revert "[media] uvcvideo: Set error_idx properly for extended ↵Rafael J. Wysocki
controls API failures" Commit f0ed2ce840b3 ("[media] uvcvideo: Set error_idx properly for extended controls API failures") causes user space to behave incorrectly on one of my test machines (there is no sound under KDE 4.9.4 using pulseaudio and there is a knotify4 process occupying one of the CPU cores 100% of the time). Reverting that commit entirely fixes the problem for me. However, commit f0ed2ce840b3 appears to do more than it follows from its changelog, because the changelog only says about the changes related to ctrls->error_idx, while the commit additionally changes error codes returned by various functions in uvc_ctrl.c and uvc_v4l2.c. It turns out that the changes of the returned error codes confuse the user spce, so it is sufficient to revert the part of commit f0ed2ce840b3 not mentioned in its changelog to fix the problem. [ 'ENOENT' is not a valid error return from an ioctl to begin with, and I don't understand how anybody ever even thought it would be. - Linus ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-23drm/nve0/graph: fix fuc, and enable acceleration on all known chipsetsBen Skeggs
Also adds GK106 to chipsets known by ucode. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nvc0/graph: fix fuc, and enable acceleration on GF119Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau/bios: cache ramcfg strap on later chipsetsBen Skeggs
This fixes suspend/resume on at least Quadro 400. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau/mxm: silence output if no bios dataBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau/bios: parse/display extra version componentBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau/bios: implement opcode 0xa9Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau/bios: update gpio parsing apis to match current designBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-23drm/nouveau: initial support for GK106Ben Skeggs
Modesetting seems to work alright, as does graphics (using binary driver fuc from nve7...). Lots to be done no doubt, but this'll get an image on the screen for people. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-22i2c: remove __dev* attributes from subsystemBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio) Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3) Acked-by: Barry Song <baohua.song@csr.com> (for sirf) Reviewed-by: Jean Delvare <khali@linux-fr.org> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-12-22hwmon: (emc6w201) Fix DIV_ROUND_CLOSEST problem with unsigned divisorsGuenter Roeck
Result of DIV_ROUND_CLOSEST is undefined for negative dividends if the divisor variable type is unsigned. Fix by declaring divisor as signed variable. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-12-22Drivers: network: more __dev* removalGreg KH
Remove some __dev* markings that snuck in the 3.8-rc1 merge window in the drivers/net/* directory. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-21hwmon: (lm73} Detect and report i2c bus errorsChris Verges
If an LM73 device does not exist on an I2C bus, attempts to communicate with the device result in an error code returned from the i2c read/write functions. The current lm73 driver casts that return value from a s32 type to a s16 type, then converts it to a temperature in celsius. Because negative temperatures are valid, it is difficult to distinguish between an error code printed to the response buffer and a negative temperature recorded by the sensor. The solution is to evaluate the return value from the i2c functions before performing any temperature calculations. If the i2c function did not succeed, the error code should be passed back through the virtual file system layer instead of being printed into the response buffer. Before: $ cat /sys/class/hwmon/hwmon0/device/temp1_input -46 After: $ cat /sys/class/hwmon/hwmon0/device/temp1_input cat: read error: No such device or address Signed-off-by: Chris Verges <kg4ysn@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-12-21Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog updates from Wim Van Sebroeck: "This includes some fixes and code improvements (like clk_prepare_enable and clk_disable_unprepare), conversion from the omap_wdt and twl4030_wdt drivers to the watchdog framework, addition of the SB8x0 chipset support and the DA9055 Watchdog driver and some OF support for the davinci_wdt driver." * git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: mei: avoid oops in watchdog unregister code path watchdog: Orion: Fix possible null-deference in orion_wdt_probe watchdog: sp5100_tco: Add SB8x0 chipset support watchdog: davinci_wdt: add OF support watchdog: da9052: Fix invalid free of devm_ allocated data watchdog: twl4030_wdt: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER watchdog: remove depends on CONFIG_EXPERIMENTAL watchdog: Convert dev_printk(KERN_<LEVEL> to dev_<level>( watchdog: DA9055 Watchdog driver watchdog: omap_wdt: eliminate goto watchdog: omap_wdt: delete redundant platform_set_drvdata() calls watchdog: omap_wdt: convert to devm_ functions watchdog: omap_wdt: convert to new watchdog core watchdog: WatchDog Timer Driver Core: fix comment watchdog: s3c2410_wdt: use clk_prepare_enable and clk_disable_unprepare watchdog: imx2_wdt: Select the driver via ARCH_MXC watchdog: cpu5wdt.c: add missing del_timer call watchdog: hpwdt.c: Increase version string watchdog: Convert twl4030_wdt to watchdog core davinci_wdt: preparation for switch to common clock framework ...
2012-12-21Merge tag 'dm-3.8-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull dm update from Alasdair G Kergon: "Miscellaneous device-mapper fixes, cleanups and performance improvements. Of particular note: - Disable broken WRITE SAME support in all targets except linear and striped. Use it when kcopyd is zeroing blocks. - Remove several mempools from targets by moving the data into the bio's new front_pad area(which dm calls 'per_bio_data'). - Fix a race in thin provisioning if discards are misused. - Prevent userspace from interfering with the ioctl parameters and use kmalloc for the data buffer if it's small instead of vmalloc. - Throttle some annoying error messages when I/O fails." * tag 'dm-3.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (36 commits) dm stripe: add WRITE SAME support dm: remove map_info dm snapshot: do not use map_context dm thin: dont use map_context dm raid1: dont use map_context dm flakey: dont use map_context dm raid1: rename read_record to bio_record dm: move target request nr to dm_target_io dm snapshot: use per_bio_data dm verity: use per_bio_data dm raid1: use per_bio_data dm: introduce per_bio_data dm kcopyd: add WRITE SAME support to dm_kcopyd_zero dm linear: add WRITE SAME support dm: add WRITE SAME support dm: prepare to support WRITE SAME dm ioctl: use kmalloc if possible dm ioctl: remove PF_MEMALLOC dm persistent data: improve improve space map block alloc failure message dm thin: use DMERR_LIMIT for errors ...
2012-12-21Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull more infiniband changes from Roland Dreier: "Second batch of InfiniBand/RDMA changes for 3.8: - cxgb4 changes to fix lookup engine hash collisions - mlx4 changes to make flow steering usable - fix to IPoIB to avoid pinning dst reference for too long" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb4: Fix bug for active and passive LE hash collision path RDMA/cxgb4: Fix LE hash collision bug for passive open connection RDMA/cxgb4: Fix LE hash collision bug for active open connection mlx4_core: Allow choosing flow steering mode mlx4_core: Adjustments to Flow Steering activation logic for SR-IOV mlx4_core: Fix error flow in the flow steering wrapper mlx4_core: Add QPN enforcement for flow steering rules set by VFs cxgb4: Add LE hash collision bug fix path in LLD driver cxgb4: Add T4 filter support IPoIB: Call skb_dst_drop() once skb is enqueued for sending
2012-12-21tuntap: dont use a private kmem_cacheEric Dumazet
Commit 96442e42429 (tuntap: choose the txq based on rxq) added a per tun_struct kmem_cache. As soon as several tun_struct are used, we get an error because two caches cannot have same name. Use the default kmalloc()/kfree_rcu(), as it reduce code size and doesn't have performance impact here. Reported-by: Paul Moore <pmoore@redhat.com> Tested-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-21solos-pci: double lock in geos_gpio_store()Dan Carpenter
There is a typo here so we do a double lock instead of an unlock. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-21dm stripe: add WRITE SAME supportMike Snitzer
Rename stripe_map_discard to stripe_map_range and reuse it for WRITE SAME bio processing. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21dm: remove map_infoMikulas Patocka
This patch removes map_info from bio-based device mapper targets. map_info is still used for request-based targets. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>