summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2005-09-11[PATCH] Sun HME: enable and map PCI ROM properlyWilly Tarreau
This ports the Sun GEM ROM mapping/enable fixes it sunhme (which used the same PCI ROM mapping code). Without this, I get NULL MAC addresses for all 4 ports (it's a SUN QFE). With it, I get the correct addresses (the ones printed on the label on the card). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11Sun GEM ethernet: enable and map PCI ROM properlyLinus Torvalds
This same patch was reported to fix the MAC address detection on sunhme (next patch). Most people seem to be running this on Sparcs or PPC machines, where we get the MAC address from their respective firmware rather than from the (previously broken) ROM mapping routines. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11hpt366: write the full 4 bytes of ROM address, not just low 1 byteLinus Torvalds
This is one heck of a confused driver. It uses a byte write to a dword register to enable a ROM resource that it doesn't even seem to be using. "Lost and wandering in the desert of confusion" Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11Merge master.kernel.org:/home/rmk/linux-2.6-mmc Linus Torvalds
2005-09-11[MFD] Cleanups suggested by Dmitri, Vojtech and lists.Pavel Machek
These are small ucb1x00-ts cleanups, as suggested by Vojtech, Dmitri and the lists. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 assabet platform supportRussell King
Add support for Intel assabet specific board support for UCB1200/UCB1300 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 touchscreen supportRussell King
Add support for Philips UCB1200 and UCB1300 touchscreen interfaces found on ARM devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 device supportRussell King
Add the core device support code for the Philips UCB1200 and UCB1300 devices. Also includes the following from Pavel: This fixes u32 vs. pm_message_t confusion and uses cleaner try_to_freeze() [fixing compilation as a side-effect on newer kernels.] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-10[PATCH] Fix breakage on ppc{,64} by "nvidiafb: Fallback to firmware EDID"Alexey Dobriyan
Fix drivers/video/nvidia/nv_of.c:34: error: conflicting types for 'nvidia_probe_i2c_connector' drivers/video/nvidia/nv_proto.h:38: error: previous declaration of 'nvidia_probe_i2c_connector' was here Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input Linus Torvalds
2005-09-10Merge master.kernel.org:/home/rmk/linux-2.6-serial Linus Torvalds
2005-09-10[PATCH] envctrl fixesviro@ZenIV.linux.org.uk
envctrl doesn't need unistd.h; moreover, since it declares errno static gcc4 gets very unhappy about including unistd.h. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] __user annotations (scsi/ch)viro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] cfq-iosched: reverse bad reference count fixJens Axboe
The reference count fix merged isn't fully bug free. It doesn't leak now, but instead it crashes due to looking at freed memory. So for now, lets reverse the change and I'll fix it for real next week. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] telephony: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_uninterruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] parport: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use human-time to jiffies units conversion functions rather than direct HZ division to avoid rounding issues. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] drivers/char: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] drivers/cdrom: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_{un,}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] drivers/block: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_{un,}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] remove ACPI S4bios supportPavel Machek
Remove S4BIOS support. It is pretty useless, and only ever worked for _me_ once. (I do not think anyone else ever tried it). It was in feature-removal for a long time, and it should have been removed before. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] janitor: ide/ide-cs: replace schedule_timeout() with msleep()Nishanth Aravamudan
Uses msleep() in place of schedule_timeout() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] janitor: block/xd: replace schedule_timeout() with ↵Nishanth Aravamudan
msleep()/msleep_interruptible() Use msleep() or msleep_interruptible() [as appropriate] instead of schedule_timeout() to gurantee the task delays as expected. As a result changed the units of the timeout variable from jiffies to msecs. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] janitor: tulip/de4x5: list_for_eachDomen Puncer
s/for/list_for_each/ Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] janitor: block/umem: replace PRINTK with pr_debugDomen Puncer
Removed unused dprintk, replaced PRINTK with pr_debug. Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] janitor: ide-tape: replace schedule_timeout() with msleep()Nishanth Aravamudan
Uses msleep() instead of schedule_timeout() to guarantee the task delays at least the desired time amount. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] janitor: net/ppp-generic: list_for_each_entryDomen Puncer
Make code more readable with list_for_each_entry. Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] janitor: ide: min/max macros in ide-timing.hClemens Buchacher
I replaced the custom MIN/MAX macros with the type safe min/max macros from linux/kernel.h. Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] drivers/char/lp.c : Use of the time_after() macroMarcelo Feitoza Parisi
Use of the time_after() macro, defined at linux/jiffies.h, which deals with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] merge some from Rusty's trivial patchesAdrian Bunk
This patch contains the most trivial from Rusty's trivial patches: - spelling fixes - remove duplicate includes Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] vfree and kfree cleanup in drivers/Jesper Juhl
This patch does a full cleanup of 'NULL checks before vfree', and a partial cleanup of calls to kfree for all of drivers/ - the kfree bit is partial in that I only did the files that also had vfree calls in them. The patch also gets rid of some redundant (void *) casts of pointers being passed to [vk]free, and a some tiny whitespace corrections also crept in. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] fix unusual placement of inline keyword in hpetAdrian Bunk
With gcc -W: drivers/char/hpet.c:102: warning: `inline' is not at beginning of declaration drivers/char/hpet.c:109: warning: `inline' is not at beginning of declaration Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] telephony/ixj: use msleep() instead of schedule_timeout()Nishanth Aravamudan
Replace schedule_timeout() with msleep() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] dmapool: Fix "nocast type" warningsVictor Fusco
Fix the sparse warning "implicit cast to nocast type" Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] char/n_tty: fix sparse warnings (__nocast type)Victor Fusco
Fix the sparse warning "implicit cast to nocast type" Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] hdpu_cpustate.c: misc_register() can failChristophe Lucas
Signed-off-by: Christophe Lucas <clucas@rotomalug.org> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] drivers/char/lcd.c: misc_register() can failChristophe Lucas
Signed-off-by: Christophe Lucas <clucas@rotomalug.org> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] applicom: fix error handlingChristophe Lucas
misc_register() can fail. Signed-off-by: Christophe Lucas <clucas@rotomalug.org> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] synclink_cs add statistics clearPaul Fulghum
Add ability to clear statistics. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] Subject: PATCH: fix numa caused compile warningsAlan Cox
pcibus_to_cpumask expands into more than just an initialiser so gcc moans about code before variable declarations. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10Input: i8042 - use kzalloc instead of kcallocDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-09-10Input: clean up whitespace and formatting in drivers/char/keyboard.cDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-09-10[MMC] Add mmc_detect_change() delay support for wbsd driverRussell King
Convert wbsd to use the new delay functionality in mmc_detect_change() rather than implementing its own timer. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-09Manual merge with LinusDmitry Torokhov
2005-09-09[PATCH] md: fix BUG when raid10 rebuilds without enough drivesNeilBrown
This shouldn't be a BUG. We should cope. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: fix raid10 assembly when too many devices are missingNeilBrown
If you try to assemble an array with too many missing devices, raid10 will now reject the attempt, instead of allowing it. Also check when hot-adding a drive and refuse the hot-add if the array is beyond hope. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: really get sb_size setting right in all casesNeilBrown
There was another case where sb_size wasn't being set, so instead do the sensible thing and set if when filling in the content of a superblock. That ensures that whenever we write a superblock, the sb_size MUST be set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: make sure the new 'sb_size' is set properly device added without ↵NeilBrown
pre-existing superblock. There are two ways to add devices to an md/raid array. It can have superblock written to it, and then given to the md driver, which will read the superblock (the new way) or md can be told (through SET_ARRAY_INFO) the shape of the array, and the told about individual drives, and md will create the required superblock (the old way). The newly introduced sb_size was only set for drives being added the new way, not the old ways. Oops :-( Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: report spare drives in /proc/mdstatNeilBrown
Just like failed drives have (F), so spare drives now have (S). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: add information about superblock version to /proc/mdstatNeilBrown
Leave it unchanged if the original (0.90) is used, incase it might be a compatability problem. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: use queue_hardsect_size instead of block_size for md superblock ↵NeilBrown
size calc. Doh. I want the physical hard-sector-size, not the current block size... Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 19:39:29 +0000