summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2013-02-22drm/tegra: Implement VBLANK supportThierry Reding
Implement support for the VBLANK IOCTL. Note that Tegra is somewhat special in this case because it doesn't use the generic IRQ support provided by the DRM core (DRIVER_HAVE_IRQ) but rather registers one interrupt handler for each display controller. While at it, clean up the way that interrupts are enabled to ensure that the VBLANK interrupt only gets enabled when required. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-02-22drm/tegra: Implement .mode_set_base()Thierry Reding
The sequence for replacing the scanout buffer is much shorter than a full mode change operation so implementing this callback considerably speeds up cases where only a new framebuffer is to be scanned out. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-02-22drm/tegra: Add plane supportThierry Reding
Add support for the B and C planes which support RGB and YUV pixel formats and can be used as overlays or hardware cursor. Currently 32-bit XRGB as well as UYVY, YUV420 and YUV422 pixel formats are advertised. Other formats should be easy to add but these are the most common ones and should cover the majority of use-cases. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-02-22drm/tegra: Remove bogus tegra_framebuffer structureThierry Reding
Tegra uses the CMA FB helpers so framebuffers passed to the driver need to use the corresponding functions to access the underlying GEM objects. This used to work because struct tegra_framebuffer was sufficiently similar to struct drm_fb_cma but that isn't guaranteed to stay that way. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-02-22drm: Add consistency check for page-flippingThierry Reding
Driver implementations of the drm_crtc's .page_flip() function are required to update the crtc->fb field on success to reflect that the new framebuffer is now in use. This is important to keep reference counting on the framebuffers balanced. While at it, document this requirement to keep others from falling into the same trap. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-22drm/radeon: Use generic HDMI infoframe helpersThierry Reding
Use the generic HDMI infoframe helpers to get rid of the duplicate implementation in the radeon driver. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-22drm/tegra: Use generic HDMI infoframe helpersThierry Reding
Use the generic HDMI infoframe helpers to get rid of the NVIDIA Tegra reimplementation. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-22drm: Add HDMI infoframe helpersThierry Reding
Add a generic helper to fill in an HDMI AVI infoframe with data extracted from a DRM display mode. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-22video: Add generic HDMI infoframe helpersThierry Reding
Add generic helpers to pack HDMI infoframes into binary buffers. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-22drm: Move mode tables to drm_edid.cThierry Reding
The modes are only used from within drm_edid.c so we move them there to avoid creating duplicates by multiple inclusion of drm_edid_modes.h. As a side-effect we can also get rid of a few variables that keep track of the number of entries in the tables and use ARRAY_SIZE() instead. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-22drm: Remove duplicate drm_mode_cea_vic()Thierry Reding
The same function had already been merged with a different name. Remove the duplicate one but reuse some of its kerneldoc fragments for the existing implementation. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-21Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm changes from Peter Anvin: "This is a huge set of several partly interrelated (and concurrently developed) changes, which is why the branch history is messier than one would like. The *really* big items are two humonguous patchsets mostly developed by Yinghai Lu at my request, which completely revamps the way we create initial page tables. In particular, rather than estimating how much memory we will need for page tables and then build them into that memory -- a calculation that has shown to be incredibly fragile -- we now build them (on 64 bits) with the aid of a "pseudo-linear mode" -- a #PF handler which creates temporary page tables on demand. This has several advantages: 1. It makes it much easier to support things that need access to data very early (a followon patchset uses this to load microcode way early in the kernel startup). 2. It allows the kernel and all the kernel data objects to be invoked from above the 4 GB limit. This allows kdump to work on very large systems. 3. It greatly reduces the difference between Xen and native (Xen's equivalent of the #PF handler are the temporary page tables created by the domain builder), eliminating a bunch of fragile hooks. The patch series also gets us a bit closer to W^X. Additional work in this pull is the 64-bit get_user() work which you were also involved with, and a bunch of cleanups/speedups to __phys_addr()/__pa()." * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (105 commits) x86, mm: Move reserving low memory later in initialization x86, doc: Clarify the use of asm("%edx") in uaccess.h x86, mm: Redesign get_user with a __builtin_choose_expr hack x86: Be consistent with data size in getuser.S x86, mm: Use a bitfield to mask nuisance get_user() warnings x86/kvm: Fix compile warning in kvm_register_steal_time() x86-32: Add support for 64bit get_user() x86-32, mm: Remove reference to alloc_remap() x86-32, mm: Remove reference to resume_map_numa_kva() x86-32, mm: Rip out x86_32 NUMA remapping code x86/numa: Use __pa_nodebug() instead x86: Don't panic if can not alloc buffer for swiotlb mm: Add alloc_bootmem_low_pages_nopanic() x86, 64bit, mm: hibernate use generic mapping_init x86, 64bit, mm: Mark data/bss/brk to nx x86: Merge early kernel reserve for 32bit and 64bit x86: Add Crash kernel low reservation x86, kdump: Remove crashkernel range find limit for 64bit memblock: Add memblock_mem_size() x86, boot: Not need to check setup_header version for setup_data ...
2013-02-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "The most prominent change in this patch set is the software dirty bit patch for s390. It removes __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY and the page_test_and_clear_dirty primitive which makes the common memory management code a bit less obscure. Heiko fixed most of the PCI related fallout, more often than not missing GENERIC_HARDIRQS dependencies. Notable is one of the 3270 patches which adds an export to tty_io to be able to resize a tty. The rest is the usual bunch of cleanups and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits) s390/module: Add missing R_390_NONE relocation type drivers/gpio: add missing GENERIC_HARDIRQ dependency drivers/input: add couple of missing GENERIC_HARDIRQS dependencies s390/cleanup: rename SPP to LPP s390/mm: implement software dirty bits s390/mm: Fix crst upgrade of mmap with MAP_FIXED s390/linker skript: discard exit.data at runtime drivers/media: add missing GENERIC_HARDIRQS dependency s390/bpf,jit: add vlan tag support drivers/net,AT91RM9200: add missing GENERIC_HARDIRQS dependency iucv: fix kernel panic at reboot s390/Kconfig: sort list of arch selected config options phylib: remove !S390 dependeny from Kconfig uio: remove !S390 dependency from Kconfig dasd: fix sysfs cleanup in dasd_generic_remove s390/pci: fix hotplug module init s390/pci: cleanup clp page allocation s390/pci: cleanup clp inline assembly s390/perf: cpum_cf: fallback to software sampling events s390/mm: provide PAGE_SHARED define ...
2013-02-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID subsystem updates from Jiri Kosina: "HID subsystem and drivers update. Highlights: - new support of a group of Win7/Win8 multitouch devices, from Benjamin Tissoires - fix for compat interface brokenness in uhid, from Dmitry Torokhov - conversion of drivers to use hid_driver helper, by H Hartley Sweeten - HID over I2C transport received ACPI enumeration support, written by Mika Westerberg - there is an ongoing effort to make HID sensor hubs independent of USB transport. The first self-contained part of this work is provided here, done by Mika Westerberg - a few smaller fixes here and there, support for a couple new devices added" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (43 commits) HID: Correct Logitech order in hid-ids.h HID: LG4FF: Remove unnecessary deadzone code HID: LG: Prevent the Logitech Gaming Wheels deadzone HID: LG: Fix detection of Logitech Speed Force Wireless (WiiWheel) HID: LG: Add support for Logitech Momo Force (Red) Wheel HID: hidraw: print message when succesfully initialized HID: logitech: split accel, brake for Driving Force wheel HID: logitech: add report descriptor for Driving Force wheel HID: add ThingM blink(1) USB RGB LED support HID: uhid: make creating devices work on 64/32 systems HID: wiimote: fix nunchuck button parser HID: blacklist Velleman data acquisition boards HID: sensor-hub: don't limit the driver only to USB bus HID: sensor-hub: get rid of unused sensor_hub_grabbed_usages[] table HID: extend autodetect to handle I2C sensors as well HID: ntrig: use input_configured() callback to set the name HID: multitouch: do not use pointers towards hid-core HID: add missing GENERIC_HARDIRQ dependency HID: multitouch: make MT_CLS_ALWAYS_TRUE the new default class HID: multitouch: fix protocol for Elo panels ...
2013-02-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Assorted tiny fixes queued in trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits) DocBook: update EXPORT_SYMBOL entry to point at export.h Documentation: update top level 00-INDEX file with new additions ARM: at91/ide: remove unsused at91-ide Kconfig entry percpu_counter.h: comment code for better readability x86, efi: fix comment typo in head_32.S IB: cxgb3: delay freeing mem untill entirely done with it net: mvneta: remove unneeded version.h include time: x86: report_lost_ticks doesn't exist any more pcmcia: avoid static analysis complaint about use-after-free fs/jfs: Fix typo in comment : 'how may' -> 'how many' of: add missing documentation for of_platform_populate() btrfs: remove unnecessary cur_trans set before goto loop in join_transaction sound: soc: Fix typo in sound/codecs treewide: Fix typo in various drivers btrfs: fix comment typos Update ibmvscsi module name in Kconfig. powerpc: fix typo (utilties -> utilities) of: fix spelling mistake in comment h8300: Fix home page URL in h8300/README xtensa: Fix home page URL in Kconfig ...
2013-02-21Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge misc patches from Andrew Morton: - Florian has vanished so I appear to have become fbdev maintainer again :( - Joel and Mark are distracted to welcome to the new OCFS2 maintainer - The backlight queue - Small core kernel changes - lib/ updates - The rtc queue - Various random bits * akpm: (164 commits) rtc: rtc-davinci: use devm_*() functions rtc: rtc-max8997: use devm_request_threaded_irq() rtc: rtc-max8907: use devm_request_threaded_irq() rtc: rtc-da9052: use devm_request_threaded_irq() rtc: rtc-wm831x: use devm_request_threaded_irq() rtc: rtc-tps80031: use devm_request_threaded_irq() rtc: rtc-lp8788: use devm_request_threaded_irq() rtc: rtc-coh901331: use devm_clk_get() rtc: rtc-vt8500: use devm_*() functions rtc: rtc-tps6586x: use devm_request_threaded_irq() rtc: rtc-imxdi: use devm_clk_get() rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug() rtc: rtc-pcf8583: use dev_warn() instead of printk() rtc: rtc-sun4v: use pr_warn() instead of printk() rtc: rtc-vr41xx: use dev_info() instead of printk() rtc: rtc-rs5c313: use pr_err() instead of printk() rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug() rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug() rtc: rtc-ds2404: use dev_err() instead of printk() rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk() ...
2013-02-21rtc: rtc-davinci: use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-max8997: use devm_request_threaded_irq()Jingoo Han
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-max8907: use devm_request_threaded_irq()Jingoo Han
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-da9052: use devm_request_threaded_irq()Jingoo Han
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-wm831x: use devm_request_threaded_irq()Jingoo Han
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-tps80031: use devm_request_threaded_irq()Jingoo Han
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-lp8788: use devm_request_threaded_irq()Jingoo Han
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-coh901331: use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-vt8500: use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-tps6586x: use devm_request_threaded_irq()Jingoo Han
Use devm_request_threaded_irq() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-imxdi: use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()Jingoo Han
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-pcf8583: use dev_warn() instead of printk()Jingoo Han
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-sun4v: use pr_warn() instead of printk()Jingoo Han
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-vr41xx: use dev_info() instead of printk()Jingoo Han
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-rs5c313: use pr_err() instead of printk()Jingoo Han
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()Jingoo Han
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()Jingoo Han
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-ds2404: use dev_err() instead of printk()Jingoo Han
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()Jingoo Han
Fix the checkpatch warnings as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... WARNING: please, no space before tabs Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: max77686: use dev_info() instead of printk()Jingoo Han
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: use dev_warn()/dev_dbg()/pr_err() instead of printk()Jingoo Han
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/rtc/rtc-sa1100.c: move clock enable/disable to probe/removeChao Xie
The original sa1100_rtc_open/sa1100_rtc_release will be called when the /dev/rtc0 is opened or closed. In fact, these two functions will enable/disable the clock. Disabling clock will make rtc not work. So only enable/disable clock when probe/remove the device. Signed-off-by: Chao Xie <chao.xie@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Leo Song <liangs@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: max8997: add driver for max8997 rtcJonghwa Lee
Add an rtc driver for Maxim 8997 multifunction chip. Max8997 has rtc module in it. and it can be used for timekeeping clock and system alarm. It provide various operational mode those are BCD/binary, 24/12hour, am/pm. Driver sets binary/24/ for default. Maxim 8997 also supports SMPL(Sudden Momentary Power Loss), WTSR (Watchdog Timeout and Software Reset). Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Cc: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/rtc/rtc-s3c.c: use dev_dbg() instaed of pr_debug()Jingoo Han
Use dev_dbg() instaed of pr_debug() to be consistent. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/rtc/rtc-pl031.c: add wakeup supportRob Herring
Mark the pl031 as wake-up capable so that rtcwake and suspend test can work. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: add support for spi rtc rx4581Torben Hohn
[akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Torben Hohn <torbenh@linutronix.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/rtc/rtc-tps65910.c: set irq flag to IRQF_EARLY_RESUME during irq requestLaxman Dewangan
All interrupt get disabled during system suspend and enabled during system resume. The enabling/disabling of interrupt happen in sequence of interrupt registration with framework. Therefore, in resume, the parent interrupt of this device enabled before the RTC irq interrupt enabled. If RTC is enabled for alarm wake and if system wake by alarm then there is interrupt pending for RTC. In resume, the parent interrupt get enabled before the rtc interrupt and hence ISR get served. In ISR, it founds that rtc interrupt is disabled and so it does not call the rtc isr handler and hence it misses the interrupt. Setting flag for early resume so that rtc interrupt get enabled before parent interrupt and so rtc interrupt get enabled when parent interrupt handler check for interrupt of device and call the rtc handler if it is there. This way it will not miss the interrupt. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/rtc/rtc-tps65910.c: use sleep_pm_ops macro for initialising ↵Laxman Dewangan
suspend/resume callbacks Use SET_SYSTEM_SLEEP_PM_OPS for setting suspend/resume callbacks for dev_pm_ops. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/rtc/rtc-tps65910.c: remove unnecessary irq stat save and restoreLaxman Dewangan
The driver stores the interrupt enable register before going to suspend and restore in resume. Also it enables alarm before going to suspend. The driver only write the Interrupt enable register for enabling ALARM and does not enable any other bits. So it is not require to save complete register and enable ALARM interrupt before suspend and restore in resume. Also ALARM interrupt already enable if alarm is enabled before going to suspend and hence it is not require to enable explictly in suspend. Removing such above code. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/rtc/rtc-tps65910.c: enable/disable wake in suspend/resumeLaxman Dewangan
Making the rtc driver as wakeup capabale and leaving the wake enable/disable decision to user space through a sysfs attribute. In suspend, enable wake if device wakeup enabled. In resume disable wake again. This change is inline with the Documentation/power/devices.txt# /sys/devices/.../power/wakeup files Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: add RTC driver for TPS80031/TPS80032Laxman Dewangan
Add an RTC driver for TPS80031/TPS80032 chips by TI. This driver supports: - Setting and getting time and date. - Setting and reading alarm time. - Alarm and interrupt functionlity. [akpm@linux-foundation.org: remove obsolete __devinit/__devexit] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: add new lp8788 rtc driverKim, Milo
TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight driver and current sinks. This patch enables LP8788 rtc module. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: "devendra.aaru" <devendra.aaru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/rtc/rtc-ds2404.c: use module_platform_driver macroSrinivas Kandagatla
Remove removes some code duplication by using module_platform_driver(). Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>