summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2013-01-18tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18tty: Add driver unthrottle in ioctl(...,TCFLSH,..).Ilya Zykov
Regression 'tty: fix "IRQ45: nobody cared"' Regression commit 7b292b4bf9a9d6098440d85616d6ca4c608b8304 Function reset_buffer_flags() also invoked during the ioctl(...,TCFLSH,..). At the time of request we can have full buffers and throttled driver too. If we don't unthrottle driver, we can get forever throttled driver, because, after request, we will have empty buffers and throttled driver and there is no place to unthrottle driver. It simple reproduce with "pty" pair then one side sleep on tty->write_wait, and other side do ioctl(...,TCFLSH,..). Then there is no place to do writers wake up. Signed-off-by: Ilya Zykov <ilya@ilyx.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18serial: lpc32xx: Fix fallout from tty_port conversionThierry Reding
A duplicate definition of the port variable was introduced in the interrupt handler, which causes the build to break. The fix is to rename the variable to tport, which is already properly used in subsequent code. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: vt8500: Cleanup code using devm_ functionTony Prisk
Convert the last memory allocation (vt8500_port) to use devm_kzalloc and remove the fail path cleanup code from vt8500_serial_probe. Reorder iomem mapping above clk_enable to simplify fail code. The clock is only enabled if all other resources are available. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: vt8500: UART uses gated clock rather than 24Mhz referenceTony Prisk
UART modules on Wondermedia SoCs are connected via a gated clock source, rather than directly to the 24Mhz reference clock. While uboot enables UART0 for debugging, other UART ports are unavailable until the clock is enabled. This patch checks that a valid clock is actually passed from devicetree, enables the clock in probe. This change removes the fallback when a clock was not specified as it doesn't apply any longer (and would only work if the UART clock was already enabled). DTSI files are updated for VT8500, WM8505 and WM8650. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: tegra: Switch to using struct tty_portThierry Reding
Many of the tty functions were converted to use a struct tty_port instead of a struct tty_struct. Update the Tegra driver accordingly to avoid build breakage. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: imx: Remove unused 'tty' variableFabio Estevam
Commit 2e124b4a39 (TTY: switch tty_flip_buffer_push) introduced the following build warning: drivers/tty/serial/imx.c:519:21: warning: unused variable 'tty' [-Wunused-variable] Remove the unused 'tty' variable. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: pxa: Do not tweak clock in pxa serial write() functionHaojun Bao
The write() function could be used by printk(), which is atomic and tweaking clock there can cause "BUG: sleeping function called from invalid context". Signed-off-by: Bao Haojun <hjbao@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: sccnxp: Fix possible crash if no platform data suppliedAlexander Shiyan
This patch fix possible kernel crash if no platform data supplied. We should not use platform data in this case, instead we will use default values from private driver structure. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: rp2: New driver for Comtrol RocketPort 2 cardsKevin Cernekee
This driver supports the RocketPort EXPRESS and RocketPort INFINITY families of PCI/PCIe multiport serial adapters. These adapters use a "RocketPort 2" ASIC that is not compatible with the original RocketPort driver (CONFIG_ROCKETPORT). Tested with the RocketPort EXPRESS Octa DB9 and Quad DB9. Also added an old RocketPort 8J PCI card to the same system to verify that rocket.c and rp2.c coexist peacefully. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17tty: rocket: Explicitly list supported PCI IDsKevin Cernekee
Matching PCI_ANY_ID causes conflicts with RocketPort 2 adapters, which are supported by a different driver. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: vt8500: ioremap'd resource is never freedTony Prisk
Memory mapped via ioremap call is never released. Rather than add an iounmap call, change allocation function to devm_request_and_ioremap. Also, change the error on failure for this call to -EADDRNOTAVAIL rather than -ENOMEM. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: vt8500: Fix range-checking on vt8500_uart_portsTony Prisk
Fix two instances where the index to vt8500_uart_ports is tested against > VT8500_MAX_PORTS. Correct usage should be >= VT8500_MAX_PORTS. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17tty: serial/crisv10.c: remove unnecessary null pointer checkCong Ding
The pointer tty is dereferened in line 3135, so it is not necessary to check null again in line 3140. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17tty: serial/68328serial.c: remove unnecessary null pointer checkCong Ding
The pointer info is dereferened in line 1009, so it is not necessary to check null again in line 1012. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17OMAP/serial: Support 1Mbaud and similar baudrates that require Mode16 ↵Alexey Pelykh
instead of Mode13 Original table in OMAP TRM named "UART Mode Baud Rates, Divisor Values, and Error Rates" determines modes not for all common baud rates. E.g. for 1000000 baud rate mode should be 16x, but according to that table it's determined as 13x. According to current implementation of mode divisor selection, after requesting 1000000 baudrate from driver, later one will configure chip to use MODE13 divisor. Assuming 48Mhz as common UART clock speed, MODE13 divisor will effectively give 1230769 baudrate, what is quite far from desired 1000000 baudrate. While with MODE16 divisor, chip will produce exact 1000000 baudrate. In old driver that served UART devices (8250.c and serial_core.c) this divisor could have been configured by user-space program, but in omap_serial.c driver implementation this ability was not implemented (afaik, by design) thus disallowing proper usage of MODE16-compatible baudrates. Signed-off-by: Alexey Pelykh <alexey.pelykh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial/arc-uart: Fix section mistmatchVineet Gupta
Commit "serial/arc-uart: split probe from probe_earlyprintk" introduced a build time warning: "WARNING: vmlinux.o(.data+0x5baa0): Section mismatch in reference from the variable early_arc_platform_driver to the function .init.text:arc_serial_probe_earlyprintk()" While at it - fixed another incorrectly placed initdata annotation. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: fengguang.wu@intel.com Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17serial: sirf: only use lookup table to set baudrate when ioclk=150MHzBarry Song
The fast lookup table to set baudrate is only right when ioclk is 150MHz. for most platforms, ioclk is 150MHz, but some boards might set ioclk to other frequency. so re-calc the clk_div_reg when ioclk is not 150MHz. this patch also gets clk in probe and puts it in remove. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16Staging: sb105x: mark it BROKENGreg Kroah-Hartman
It isn't using the port logic, and breaks the build at the moment, so mark it BROKEN. Cc: Jiri Slaby <jslaby@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16TTY: ip22zilog, fix tty_flip_buffer_push callJiri Slaby
This one was omitted by the "TTY: switch tty_flip_buffer_push" patch because I did not compile-test mips driver. Now I do. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16serial: 8250_dw: Set maxburst sizeHeikki Krogerus
The default burst is often 1 byte which is not very optimal. The ideal burst size when using 16550A type port would be 1/2 of fifosize, but this does not work with all Designware implementations. Setting it to 1/4 fifosize. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16serial: 8250_dw: Use ifdef with ACPIHeikki Krogerus
There are no stubs for ACPI functions so the driver needs to have this ifdef or it will not compile without ACPI. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16serial: 8250_dma: TX optimisationHeikki Krogerus
Remove one useless wakeup, and do not use DMA with zero byte transfers. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16serial: 8250_dma: Switch to using tty_portHeikki Krogerus
The tty buffer functions are converted to using tty_port structure instead of struct tty, so we must do the same. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15tty: don't deadlock while flushing workqueueSebastian Andrzej Siewior
Since commit 89c8d91e31f2 ("tty: localise the lock") I see a dead lock in one of my dummy_hcd + g_nokia test cases. The first run was usually okay, the second often resulted in a splat by lockdep and the third was usually a dead lock. Lockdep complained about tty->hangup_work and tty->legacy_mutex taken both ways: | ====================================================== | [ INFO: possible circular locking dependency detected ] | 3.7.0-rc6+ #204 Not tainted | ------------------------------------------------------- | kworker/2:1/35 is trying to acquire lock: | (&tty->legacy_mutex){+.+.+.}, at: [<c14051e6>] tty_lock_nested+0x36/0x80 | | but task is already holding lock: | ((&tty->hangup_work)){+.+...}, at: [<c104f6e4>] process_one_work+0x124/0x5e0 | | which lock already depends on the new lock. | | the existing dependency chain (in reverse order) is: | | -> #2 ((&tty->hangup_work)){+.+...}: | [<c107fe74>] lock_acquire+0x84/0x190 | [<c104d82d>] flush_work+0x3d/0x240 | [<c12e6986>] tty_ldisc_flush_works+0x16/0x30 | [<c12e7861>] tty_ldisc_release+0x21/0x70 | [<c12e0dfc>] tty_release+0x35c/0x470 | [<c1105e28>] __fput+0xd8/0x270 | [<c1105fcd>] ____fput+0xd/0x10 | [<c1051dd9>] task_work_run+0xb9/0xf0 | [<c1002a51>] do_notify_resume+0x51/0x80 | [<c140550a>] work_notifysig+0x35/0x3b | | -> #1 (&tty->legacy_mutex/1){+.+...}: | [<c107fe74>] lock_acquire+0x84/0x190 | [<c140276c>] mutex_lock_nested+0x6c/0x2f0 | [<c14051e6>] tty_lock_nested+0x36/0x80 | [<c1405279>] tty_lock_pair+0x29/0x70 | [<c12e0bb8>] tty_release+0x118/0x470 | [<c1105e28>] __fput+0xd8/0x270 | [<c1105fcd>] ____fput+0xd/0x10 | [<c1051dd9>] task_work_run+0xb9/0xf0 | [<c1002a51>] do_notify_resume+0x51/0x80 | [<c140550a>] work_notifysig+0x35/0x3b | | -> #0 (&tty->legacy_mutex){+.+.+.}: | [<c107f3c9>] __lock_acquire+0x1189/0x16a0 | [<c107fe74>] lock_acquire+0x84/0x190 | [<c140276c>] mutex_lock_nested+0x6c/0x2f0 | [<c14051e6>] tty_lock_nested+0x36/0x80 | [<c140523f>] tty_lock+0xf/0x20 | [<c12df8e4>] __tty_hangup+0x54/0x410 | [<c12dfcb2>] do_tty_hangup+0x12/0x20 | [<c104f763>] process_one_work+0x1a3/0x5e0 | [<c104fec9>] worker_thread+0x119/0x3a0 | [<c1055084>] kthread+0x94/0xa0 | [<c140ca37>] ret_from_kernel_thread+0x1b/0x28 | |other info that might help us debug this: | |Chain exists of: | &tty->legacy_mutex --> &tty->legacy_mutex/1 --> (&tty->hangup_work) | | Possible unsafe locking scenario: | | CPU0 CPU1 | ---- ---- | lock((&tty->hangup_work)); | lock(&tty->legacy_mutex/1); | lock((&tty->hangup_work)); | lock(&tty->legacy_mutex); | | *** DEADLOCK *** Before the path mentioned tty_ldisc_release() look like this: | tty_ldisc_halt(tty); | tty_ldisc_flush_works(tty); | tty_lock(); As it can be seen, it first flushes the workqueue and then grabs the tty_lock. Now we grab the lock first: | tty_lock_pair(tty, o_tty); | tty_ldisc_halt(tty); | tty_ldisc_flush_works(tty); so lockdep's complaint seems valid. The earlier version of this patch took the ldisc_mutex since the other user of tty_ldisc_flush_works() (tty_set_ldisc()) did this. Peter Hurley then said that it is should not be requried. Since it wasn't done earlier, I dropped this part. The code under tty_ldisc_kill() was executed earlier with the tty lock taken so it is taken again. I was able to reproduce the deadlock on v3.8-rc1, this patch fixes the problem in my testcase. I didn't notice any problems so far. Cc: Alan Cox <alan@linux.intel.com> Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: 8250_dw: Enable DMA support with ACPIHeikki Krogerus
With ACPI 5.0 we can use the FixedDMA Resource Descriptor to extract the needed information for DMA support. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: 8250: Add support for dmaengineHeikki Krogerus
Add support for dmaengine API. The drivers can implement the struct uart_8250_dma member in struct uart_8250_port and 8250.c can take care of the rest. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: 8250_dw: Add ACPI 5.0 supportHeikki Krogerus
This adds support for ACPI 5.0 enumerated Designware UARTs. ACPI does not deliver information about uart clk, so delivering it with the driver_data. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: 8250_dw: Set FIFO size dynamicallyHeikki Krogerus
Designware UART provides optional Component Parameter Register that lists most of the capabilities of the UART, including FIFO size. This uses that register to set FIFO size for the port before registering it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: 8250_dw: Move device tree code to separate functionHeikki Krogerus
Trivial cleanup. This makes it easier to add different methods to enumerate the device, for example ACPI 5.0 enumeration. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: 8250_dw: Map IO memoryHeikki Krogerus
This needs to be done in order to later access the Designware specific registers. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: 8250_dw: Don't use UPF_FIXED_TYPEHeikki Krogerus
Allow 8250.c to determine the port type for us. This allows the driver take advantage of FIFO on Designware UARTs that have it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: 8250: Allow drivers to deliver capabilitiesHeikki Krogerus
Modern UARTs are able to provide information about their capabilities such as FIFO size. This allows the drivers to deliver this information to 8250.c when they are registering ports. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15tty: Only wakeup the line discipline idle queue when queue is activeIvo Sieben
Before waking up the tty line discipline idle queue first check if the queue is active (non empty). This prevents unnecessary entering the critical section in the wake_up() function and therefore avoid needless scheduling overhead on a PREEMPT_RT system caused by two processes being in the same critical section. Signed-off-by: Ivo Sieben <meltedpianoman@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15drivers/tty/serial: extern function which for release resource, need check ↵Chen Gang
pointer, before free it for extern function uart_remove_one_port: need check pointer whether be NULL, before the main work. just like what the other extern function uart_add_one_port has done. uart_add_one_port and uart_remove_one_port are pair information: for the callers (such as drivers/tty/serial/jsm: jsm_tty.c, jsm_driver.c) they realy assume that: they still can call uart_remove_one_port, after uart_add_one_port failed we (as an extern function), have to understand it (just like kfree). Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: hvsi: use for_each_compatible_node() macroWei Yongjun
Use for_each_compatible_node() macro instead of open coding it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: sccnxp: Rename header file to match functionalityAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: sccnxp: Implement polling modeAlexander Shiyan
This patch adds support for polling work mode, i.e. system is perform periodical check chip status when IRQ-line is not connected to CPU. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: mcf: Add support RS485 in ColdFire serial driverQuoc-Viet Nguyen
Signed-off-by: Quoc-Viet Nguyen <afelion@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: do not reset master's packet modeJiri Slaby
Now that login from util-linux is forced to drop all references to a TTY which it wants to hangup (to reach reference count 1) we are seeing issues with telnet. When login closes its last reference to the slave PTY, it also resets packet mode on the *master* side. And we have a race here. What telnet does is fork+exec of `login'. Then there are two scenarios: * `login' closes the slave TTY and resets thus master's packet mode, but even now telnet properly sets the mode, or * `telnetd' sets packet mode on the master, `login' closes the slave TTY and resets master's packet mode. The former case is OK. However the latter happens in much more cases, by the order of magnitude to be precise. So when one tries to login to such a messed telnet setup, they see the following: inux login: ogin incorrect Note the missing first letters -- telnet thinks it is still in the packet mode, so when it receives "linux login" from `login', it considers "l" as the type of the packet and strips it. SuS does not mention how the implementation should behave. Both BSDs I checked (Free and Net) do not reset the flag upon the last close. By this I am resurrecting an old bug, see References. We are hitting it regularly now, i.e. with updated util-linux, ergo login. Here, I am changing a behavior introduced back in 2.1 times. It would better have a long time testing before goes upstream. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Bryan Mason <bmason@redhat.com> References: https://lkml.org/lkml/2009/11/11/223 References: https://bugzilla.redhat.com/show_bug.cgi?id=504703 References: https://bugzilla.novell.com/show_bug.cgi?id=797042 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15tty: add parenthesis to macro POLL_PERIOD in rocket.cCong Ding
Macros should be enclosed in parenthesis Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15tty: cleanup checkpatch warning in pty.cCong Ding
spaces are used for indent in 3 places of tty/pty.c, we change it to tab. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15tty: cleanup the panic messageCong Ding
the "\n" in panic message is excess, so we remove it in tty/pty.c as what it is used in other places. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15Revert "n_gsm.c: add tx_lock in gsm_send"Greg Kroah-Hartman
This reverts commit f96f7f7f39af53274d98aa9c29d6fa4d122218a4, at the request of Jin. Cc: xiaojin <jin.xiao@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15serial: 8250_pci: remove __devexit usageGreg Kroah-Hartman
Some __devexit markings came in from an older patch, this removes them. Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: nozomi, remove dead codeJiri Slaby
We test for !dc twice, remove the second test. Coverity found this. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: synclink, remove unneeded testsJiri Slaby
info in synclink bottom-halves cannot be NULL because it is taken from work_struct using container_of. Remove the tests. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15cyclades: push down tty_port_tty_getJiri Slaby
Now, the tty is not needed at all places in the ISR. So we can just request in on demand when really needed. This cleans TX and RX paths a bit as the indentation level can be dropped by two now when we also invert the char_count if condition. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_schedule_flipJiri Slaby
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. This is the last one: tty_schedule_flip Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_flip_buffer_pushJiri Slaby
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 13:05:01 +0000