summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2014-05-28Input: jornada680_kbd - switch top using managed resourcesHimangi Saraogi
Let's switch the driver to use managed resources, this will simplify error handling and driver unbinding logic. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: adp5520-keys - switch to using managed resourcesHimangi Saraogi
Let's switch the driver to use managed resources, this will simplify error handling and driver unbinding logic. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: da9034-ts - switch to using managed resourcesHimangi Saraogi
Let's switch the driver to use managed resources, this will simplify error handling and allows us to get rid of da9034_touch_remove(). Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: mcs5000_ts - switch to using managed resourcesBeomho Seo
Let's switch the driver to use managed resources, this will simplify error handling and driver unbinding logic. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: mcs5000_ts - fix incorrect input device nameBeomho Seo
This patch fix a typo error in MELFAS MCS-5000 controller driver. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: mms114 - fix incorrect input device nameBeomho Seo
This patch fix a typo error in mms114 touchscreen driver. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: mcs_touchkey - fix incorrect input device nameBeomho Seo
This patch fix a typo error in MELFAS 5000/5080 controller driver. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: soc_button_array - remove duplicate inclusion of input.hSachin Kamat
input.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - handle multiple input reports in one messageNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - rename touchscreen defines to include T9Nick Dyer
This avoids confusion with the newer T100 touchscreen object. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - rename pressure to amplitude to match specNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - read screen config from chipNick Dyer
By reading the touchscreen configuration from the settings that the maXTouch chip is actually using, we can remove some platform data. The matrix size is not used for anything, and results in some rather confusing code to re-read it because it may change when configuration is downloaded, so don't print it out. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - add check for incorrect firmware file formatNick Dyer
Atmel supplies firmware files in ASCII HEX format (.enc) which must be converted before they can be loaded by kernel driver. Try to detect the error and print a friendly error message rather than feeding junk to the bootloader. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - improve bootloader progress outputNick Dyer
By implementing a frame counter, print out fewer debug messages (the firmware may contain hundreds of frames). Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - implement bootloader frame retriesNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - read and report bootloader versionNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - add additional bootloader addressesNick Dyer
Move bootloaders reads/writes into separate functions. Instead of switching client->addr, define new field bootloader_addr in mxt_data. Implement lookup calculation for bootloader addresses. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - implement CRC check for configuration dataNick Dyer
The configuration is stored in NVRAM on the maXTouch chip. When the device is reset it reports a CRC of the stored configuration values. Therefore it isn't necessary to send the configuration on each probe - we can check the CRC matches and avoid a timeconsuming backup/reset cycle. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - improve error reporting and debugNick Dyer
- Add error messages for probe errors - Report type in invalid object type - Tweak some other debug output messages Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - make wait-after-reset period compatible with all chipsIiro Valkonen
The delay before the chip can be accessed after reset varies between different chips in maXTouch family. Waiting for an interrupt and a T6 status message with the RESET bit set is a better behaviour. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - wait for CHG after bootloader resetsBenson Leung
Rather than msleep for MXT_RESET_TIME and MXT_FWRESET_TIME during the transition to bootloader mode and the transition back from app, wait for the CHG assert to indicate that the transition is done. This change replaces the msleep with a wait for completion that the mxt_interrupt handler signals. Also add CHG poll after last firmware frame - some bootloader versions will assert the interrupt line after the final frame, in testing this meant that the driver attempts to read the info block too early whilst the chip is still resetting. This improves firmware update time as we no longer wait longer than necessary for each reset. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloaderBenson Leung
The driver should not immediately read bootloader status when in Application Update Mode. The CHG line will assert when the device has made a state transition and is ready to report a new status via i2c. This change adds a wait for completion in mxt_check_bootloader, and changes the mxt_interrupt handler to signal the completion. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - select FW_LOADER for firmware codeNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - define helper functions for size and instancesDaniel Kurtz
These two object table entry fields are reported 1 less than their value. When used, however, we always want the actual size and instances. To keep the object size and instances 1-byte fields, and thus preserve the object-table struct's 6-byte packed alignment, add some convenient accessor functions that do the +1 every time these fields are accessed. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - return IRQ_NONE when interrupt handler failsNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - improve T19 GPIO keys handlingNick Dyer
* The mapping of the GPIO numbers into the T19 status byte varies between different maXTouch chips. Some have up to 7 GPIOs. Allowing a keycode array of up to 8 items is simpler and more generic. So replace #define with configurable number of keys which also allows the removal of is_tp. * Rename platform data parameters to include "t19" to prevent confusion with T15 key array. * Probe aborts early on when pdata is NULL, so no need to check. * Move "int i" to beginning of function (mixed declarations and code) * Use API calls rather than __set_bit() * Remove unused dev variable. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - remove unnecessary platform dataNick Dyer
It is not necessary to download these values to the maXTouch chip on every probe, since they are stored in NVRAM. It makes life difficult when tuning the device to keep them in sync with the config array/file, and requires a new kernel build for minor tweaks. These parameters only represent a tiny subset of the available configuration options, tracking all of these options in platform data would be a endless task. In addition, different versions of maXTouch chips may have these values in different places or may not even have them at all. Having these values also makes life more complex for device tree and other platforms where having to define a static configuration isn't helpful. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - implement wakeup from suspendRoger Quadros
Improve the suspend and resume handlers to allow the device to wakeup the system from suspend. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - get rid of pdata->attb_read_val()Roger Quadros
Get rid of the attb_read_val() platform hook. Instead, read the ATTB gpio directly from the driver. Fail if valid ATTB gpio is not provided by patform data. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - initialize interrupt mode and power modeRoger Quadros
Introduce helper functions to configure power and interrupt registers. Default to IDLE mode on probe as device supports auto wakeup to ACVIE mode on detecting finger touch. Configure interrupt mode and polarity on start up. Power down on device closure or module removal. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - use devres managed resource allocationsRoger Quadros
Use devm_() and friends for allocating memory, input device and IRQ. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: ims-pcu - fix uninitialized use of 'error' in ims_pcu_buffers_alloc()Christian Engelmayer
In case allocation via usb_alloc_coherent() fails in ims_pcu_buffers_alloc(), the function jumps to the exit path without initializing local variable 'error' that is used as return value. Detected by Coverity - CID 1016531. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: wacom - add support for three new ISDv4 sensorsJason Gerecke
This patch adds support for the 0x4004, 0x5000, and 0x5002 sensors found on what should be the Motion R12, Fujitsu Q704, and Fujitsu T904. These tablets use a new report ID (3) for their touch packets and a slightly different HID descriptor format, but are otherwise largely identical in protocol to the "MTTPC" tablets. Note: * The R12 uses its 0x4004 sensor for touch input only. A pen interface is not present in its HID descriptor, though its possible a 0x4004 may be used for pen input by other tablet PCs in the future. * The 0x5002 sensor appears to use a new report ID (8) for its pen packets. The other sensors continue to use the traditional report ID (2). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: wacom - use unaligned access where necessaryJason Gerecke
A few cases of incorrectly using 'le16_to_cpup' instead of 'get_unaligned_le16' have been noticed and fixed. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Merge tag 'v3.15-rc5' into nextDmitry Torokhov
Merge with Linux 3.15-rc5 to sync up Wacom and other changes.
2014-05-14Input: pmic8xxx-pwrkey - set sane default for debounce timeStephen Boyd
If the debounce time is 0 our usage of ilog2() later on in this driver will cause undefined behavior. If CONFIG_OF=n this fact is evident to the compiler, and it emits a call to ____ilog2_NaN() which doesn't exist. Fix this by setting a sane default for debounce and failing to probe if debounce is 0 in the DT. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: wacom - add support for 0x116 sensor on Win8 Panasonic CF-H2Jason Gerecke
The Win8 version of the Panasonic CF-H2 includes a new Wacom device. The pen interface appears to use the same protocol as before, but the touch interface has been tweaked to send Win8-compatible reports. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: sun4i-ts - add support for temperature sensorHans de Goede
The sun4i resisitive touchscreen controller also comes with a built-in temperature sensor. This commit adds support for it. This commit also introduces a new "ts-attached" device-tree property, when this is not set, the input part of the driver won't register. This way the internal temperature sensor can be used to measure the SoC temperature independent of there actually being a touchscreen attached to the controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: add driver for Allwinner sunxi SoC's rtp controllerHans de Goede
Note the sun4i-ts controller is capable of detecting a second touch, but when a second touch is present then the accuracy becomes so bad the reported touch location is not useable. The original android driver contains some complicated heuristics using the aprox. distance between the 2 touches to see if the user is making a pinch open / close movement, and then reports emulated multi-touch events around the last touch coordinate (as the dual-touch coordinates are worthless). These kinds of heuristics are just asking for trouble (and don't belong in the kernel). So this driver offers straight forward, reliable single touch functionality only. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: logips2pp - fix typo in Kconfig helpDaniele Forsi
s/Logictech/Logitech/ Signed-off-by: Daniele Forsi <dforsi@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: gpio_keys_polled - convert to devm-* APIAlexander Shiyan
Replace existing resource handling in the driver with managed device resources, this ensures more consistent error values and simplifies error handling paths: kzalloc -> devm_kzalloc gpio_request_one -> devm_gpio_request_one input_allocate_polled_device -> devm_input_allocate_polled_device Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: implement managed polled input devicesDmitry Torokhov
Managed resources are becoming more and more popular in drivers. Let's implement managed polled input devices, to complement managed regular input devices. Similarly to managed regular input devices only one new call devm_input_allocate_polled_device() is added and the rest of APIs is modified to work with both managed and non-managed devices. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Tested-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: remove race when instantiating polled device attributesDmitry Torokhov
Polled device's attributes controlling polling rate and whether polling is enabled are attached to input device. We should have device core instantiate them for us, so that they are created by the time new device notification is sent to userspace, instead of doing it ourselves afterwards. Tested-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: gpio_keys - more conversions to devm-* APIAlexander Shiyan
Replace existing gpio resource handling in the driver with managed resources, this ensures more consistent error values and simplifies error paths. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: zforce - make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: mms114 - make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: lpc32xx_ts - make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: egalax_ts - make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: auo-pixcir-ts - make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Input: apbps2 - make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-19 13:33:00 +0000