summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2013-01-24Merge tag 'fixes-for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's a long-pending fixes pull request for arm-soc (I didn't send one in the -rc4 cycle). The larger deltas are from: - A fixup of error paths in the mvsdio driver - Header file move for a driver that hadn't been properly converted to multiplatform on i.MX, which was causing build failures when included - Device tree updates for at91 dealing mostly with their new pinctrl setup merged in 3.8 and mistakes in those initial configs The rest are the normal mix of small fixes all over the place; sunxi, omap, imx, mvebu, etc, etc." * tag 'fixes-for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) mfd: vexpress-sysreg: Don't skip initialization on probe ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree ARM: vexpress: extend the MPIDR range used for pen release check ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig ARM: at91/at91_dt_defconfig: remove memory specification to cmdline ARM: at91/dts: add macb mii pinctrl config for kizbox ARM: at91: rm9200: remake the BGA as default version ARM: at91: fix gpios on i2c-gpio for RM9200 DT ARM: at91/at91sam9x5 DTS: add SCK USART pins ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts ARM: at91/at91-pinctrl documentation: fix typo and add some details ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport ARM: OMAP2+: DT node Timer iteration fix ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() ARM: OMAP2+: fix build break for omapdrm ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls ...
2013-01-24Merge tag 'pm+acpi-for-3.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Two cpuidle initialization fixes from Konrad Rzeszutek Wilk. - cpufreq regression fixes for AMD processors from Borislav Petkov, Stefan Bader, and Matthew Garrett. - ACPI cpufreq fix from Thomas Schlichter. - cpufreq and devfreq fixes related to incorrect usage of operating performance points (OPP) framework and RCU from Nishanth Menon. - APEI workaround for incorrect BIOS information from Lans Zhang. * tag 'pm+acpi-for-3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Add module aliases for acpi-cpufreq ACPI: Check MSR valid bit before using P-state frequencies PM / devfreq: exynos4_bus: honor RCU lock usage PM / devfreq: add locking documentation for recommended_opp cpufreq: cpufreq-cpu0: use RCU locks around usage of OPP cpufreq: OMAP: use RCU locks around usage of OPP ACPI, APEI: Fixup incorrect 64-bit access width firmware bug ACPI / processor: Get power info before updating the C-states powernow-k8: Add a kconfig dependency on acpi-cpufreq ACPI / cpuidle: Fix NULL pointer issues when cpuidle is disabled intel_idle: Don't register CPU notifier if we are not running.
2013-01-24Merge tag 'regmap-fix-3.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "One more oversight in the debugfs code was reported and fixed, plus a documentation fix." * tag 'regmap-fix-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: fix small typo in regmap_bulk_write comment regmap: debugfs: Fix seeking from the cache
2013-01-24Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "A few fixes on slave dmanengine. There are trivial fixes in imx-dma, tegra-dma & ioat driver" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: implement flags parameters for cyclic transfer dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers. ioat: Fix DMA memory sync direction correct flag
2013-01-24Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds
git://git.pengutronix.de/git/wsa/linux Pill i2c fixes from Wolfram Sang: "Here are a few, typical driver fixes for the I2C subsystem" * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c-designware: add missing MODULE_LICENSE i2c: omap: fix draining irq handling i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt i2c: muxes: fix wrong use of sizeof(ptr) i2c: sirf: register i2c_client from dt child-nodes in probe entry i2c: mxs: Fix type of error code i2c: mxs: Fix misuse init_completion
2013-01-24Merge branch 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux ↵Olof Johansson
into fixes From Pawel Moll: - makes the V2P-CA15_A7 (a.k.a. TC2) work with 3.8 kernels - improves vexpress-sysreg.c behaviour on arm64 platforms * 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux: mfd: vexpress-sysreg: Don't skip initialization on probe ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree ARM: vexpress: extend the MPIDR range used for pen release check
2013-01-24mfd: vexpress-sysreg: Don't skip initialization on probePawel Moll
The vexpress-sysreg driver does not have to be initialized early, when the platform doesn't require this. Unfortunately in such case it wasn't initialized correctly - master site lookup and config bridge registration were missing. Fixed now. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-01-24Merge remote-tracking branch 'regmap/fix/debugfs' into tmpMark Brown
2013-01-23Merge tag 'imx-fixes-3.8-3' of ↵Olof Johansson
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo: This is yet another critical imxfb fixes held off by absence of FB maintainer for some time. * tag 'imx-fixes-3.8-3' of git://git.linaro.org/people/shawnguo/linux-2.6: video: imxfb: Do not crash on reboot
2013-01-23Merge tag 'mvebu_fixes_for_v3.8-rc5' of ↵Olof Johansson
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: mvebu fixes for v3.8-rc5 - fix memory leak in mvebu/clk-cpu.c - use devm_ to correct/simplify error paths in mvsdio - add missing #interrupt-cells property in kirkwood * tag 'mvebu_fixes_for_v3.8-rc5' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage
2013-01-23Merge tag 'usb-3.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull more USB fixes from Greg Kroah-Hartman: "Here are some more USB fixes for the 3.8-rc4 tree. Some gadget driver fixes, and finally resolved the ehci-mxc driver build issues (it's just some code moving around and being deleted)." * tag 'usb-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: EHCI: fix build error in ehci-mxc USB: EHCI: add a name for the platform-private field USB: EHCI: fix incorrect configuration test USB: EHCI: Move definition of EHCI_STATS to ehci.h USB: UHCI: fix IRQ race during initialization usb: gadget: FunctionFS: Fix missing braces in parse_opts usb: dwc3: gadget: fix ep->maxburst for ep0 ARM: i.MX clock: Change the connection-id for fsl-usb2-udc usb: gadget: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id usb: musb: cppi_dma: drop '__init' annotation
2013-01-23Merge tag 'char-misc-3.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull drivers/misc fix from Greg Kroah-Hartman: "Here is a single revert for the ti-st misc driver, fixing problem that was introduced in 3.7-rc1 that has been bothering people." * tag 'char-misc-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "drivers/misc/ti-st: remove gpio handling"
2013-01-23Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - gspca: add needed delay for I2C traffic for sonixb/sonixj cameras - gspca: add one missing Kinect USB ID - usbvideo: some regression fixes - omap3isp: fix some build issues - videobuf2: fix video output handling - exynos s5p/m5mols: a few regression fixes. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures [media] uvcvideo: Cleanup leftovers of partial revert [media] uvcvideo: Return -EACCES when trying to set a read-only control [media] omap3isp: Don't include <plat/cpu.h> [media] s5p-mfc: Fix interrupt error handling routine [media] s5p-fimc: Fix return value of __fimc_md_create_flite_source_links() [media] m5mols: Fix typo in get_fmt callback [media] v4l: vb2: Set data_offset to 0 for single-plane output buffers [media] [FOR,v3.8] omap3isp: Don't include deleted OMAP plat/ header files [media] gspca_sonixj: Add a small delay after i2c_w1 [media] gspca_sonixb: Properly wait between i2c writes [media] gspca_kinect: add Kinect for Windows USB id
2013-01-23USB: EHCI: fix build error in ehci-mxcAlan Stern
This patch (as1643b) fixes a build error in ehci-hcd when compiling for ARM with allmodconfig: drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition drivers/usb/host/ehci-mxc.c:280:31: warning: 'ehci_mxc_driver' defined but not used [-Wunused-variable] drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition The fix is to convert ehci-mxc over to the new "ehci-hcd is a library" scheme so that it can coexist peacefully with the ehci-platform driver. As part of the conversion the ehci_mxc_priv data structure, which was allocated dynamically, is now placed where it belongs: in the private area at the end of struct ehci_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22Revert "drivers/misc/ti-st: remove gpio handling"Luciano Coelho
This reverts commit eccf2979b2c034b516e01b8a104c3739f7ef07d1. The reason is that it broke TI WiLink shared transport on Panda. Also, callback functions should not be added to board files anymore, so revert to implementing the power functions in the driver itself. Additionally, changed a variable name ('status' to 'err') so that this revert compiles properly. Cc: stable <stable@vger.kernel.org> [3.7] Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-23mmc: mvsdio: use devm_ API to simplify/correct error paths.Andrew Lunn
There are a number of bugs in the error paths of this driver. Make use of devm_ functions to simplify the cleanup on error. Based on a patch by Russell King. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-23clk: mvebu/clk-cpu.c: fix memory leakageCong Ding
the variable cpuclk and clk_name should be properly freed when error happens. Signed-off-by: Cong Ding <dinggnu@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-22Merge tag '3.8-pci-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The most important is a fix for a pciehp deadlock that occurs when unplugging a Thunderbolt adapter. We also applied the same fix to shpchp, removed CONFIG_EXPERIMENTAL dependencies, fixed a pcie_aspm=force problem, and fixed a refcount leak. Details: - Hotplug PCI: pciehp: Use per-slot workqueues to avoid deadlock PCI: shpchp: Make shpchp_wq non-ordered PCI: shpchp: Handle push button event asynchronously PCI: shpchp: Use per-slot workqueues to avoid deadlock - Power management PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported - Misc PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() PCI: remove depends on CONFIG_EXPERIMENTAL" * tag '3.8-pci-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: remove depends on CONFIG_EXPERIMENTAL PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported PCI: shpchp: Use per-slot workqueues to avoid deadlock PCI: shpchp: Handle push button event asynchronously PCI: shpchp: Make shpchp_wq non-ordered PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() PCI: pciehp: Use per-slot workqueues to avoid deadlock
2013-01-22cpufreq: Add module aliases for acpi-cpufreqMatthew Garrett
The acpi core will call request_module("acpi-cpufreq") on subsystem init, but this will fail if the module isn't available at that stage of boot. Add some module aliases to ensure that udev can load the module on Intel and AMD systems with the appropriate feature bits - I /think/ that this will also work on VIA systems, but haven't verified that. References: http://lkml.kernel.org/r/1448223.sdUJnNSRz4@vostro.rjw.lan Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Tested-by: Leonid Isaev <lisaev@umail.iu.edu> Acked-by: Borislav Petkov <bp@suse.de> Cc: 3.7+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-22Merge tag 'fixes-for-v3.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here are some GPIO fixes I stacked up in my GPIO tree: - Remove a bad #include from the Samsung driver - Some Kconfig hazzle for the Samsungs - Skip gpiolib registration on EXYNOS5440 - Don't free the MVEBU label" * tag 'fixes-for-v3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mvebu: Don't free chip label memory gpio: samsung: skip gpio lib registration for EXYNOS5440 gpio: samsung: silent build warning for EXYNOS5 SoCs gpio: samsung: fix pinctrl condition for exynos and exynos5440 gpio: samsung: remove inclusion <mach/regs-clock.h>
2013-01-22Merge tag 'omap-for-v3.8-rc4/fixes-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Minimal omap fixes for the -rc series: - A build fix for recently merged omap DRM changes - Regression fixes from the common clock framework conversion for omap4 audio and omap2 reboot - Regression fix for pandaboard WLAN control UART muxing caused by u-boot only muxing essential pins nowadays - Timer iteration fix for CONFIG_OF_DYNAMIC - A section mismatch fix for ocp2scp init * tag 'omap-for-v3.8-rc4/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (306 commits) ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport ARM: OMAP2+: DT node Timer iteration fix ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() ARM: OMAP2+: fix build break for omapdrm ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM ARM: OMAP4: clock data: Lock ABE DPLL on all revisions + Linux 3.8-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-22Merge tag 'vfio-for-v3.8-rc5' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson. "vfio-pci: Fix buffer overfill" * tag 'vfio-for-v3.8-rc5' of git://github.com/awilliam/linux-vfio: vfio-pci: Fix buffer overfill
2013-01-22Merge tag 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata fixes from Jeff Garzik: 1) ahci: Fix typo that caused erronenous error handling. Thought: I wonder if sparse could have caught this, somehow. 2) ahci: support a slightly odd Enmotus variant 3) core: fix a drive detection problem by correcting the logic by which the DevSlp timing variables are obtained and used. * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] replace sata_settings with devslp_timing [libata] ahci: Add support for Enmotus Bobcat device. [libata] ahci: Fix lack of command retry after a success error handler.
2013-01-22USB: EHCI: add a name for the platform-private fieldAlan Stern
This patch (as1642) adds an ehci->priv field for private use by EHCI platform drivers. The space was provided some time ago, but it didn't have a name. Until now none of the platform drivers has used this private space, but that's about to change in the next patch of this series. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22USB: EHCI: fix incorrect configuration testAlan Stern
This patch (as1641) fixes a minor bug in ehci-hcd left over from when the Chipidea driver was converted to the "ehci-hcd is a library" scheme. The test for whether the Chipidea platform driver is active should be IS_ENABLED(), not defined(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22USB: EHCI: Move definition of EHCI_STATS to ehci.hRoger Quadros
Without this, platform drivers e.g. ehci-omap.c will see a different version of struct ehci_hcd than ehci-hcd.c and break reference to 'debug_dir' and 'priv' members when CONFIG_USB_DEBUG is enabled. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22USB: UHCI: fix IRQ race during initializationAlan Stern
This patch (as1644) fixes a race that occurs during startup in uhci-hcd. If the IRQ line is shared with other devices, it's possible for the handler routine to be called before the data structures are fully initialized. The problem is fixed by adding a check to the IRQ handler routine. If the initialization hasn't finished yet, the routine will return immediately. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Don Zickus <dzickus@redhat.com> Tested-by: "Huang, Adrian (ISS Linux TW)" <adrian.huang@hp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22i2c-designware: add missing MODULE_LICENSEMika Westerberg
The driver can also be built as a module so add MODULE_LICENSE for it. In addition add MODULE_DESCRIPTION as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22i2c: omap: fix draining irq handlingAaro Koskinen
Commit 0bdfe0cb803dce699ff337c35d8e97ac355fa417 (i2c: omap: sanitize exit path) changed the interrupt handler to exit early and complete the transfer after the draining IRQ is handled. As a result, the ARDY may not be cleared properly, and it may cause all future I2C transfers to timeout with "timeout waiting for bus ready". This is reproducible at least with N900 when twl4030_gpio makes a long write (> FIFO size) during the probe (http://marc.info/?l=linux-omap&m=135818882610432&w=2). The fix is to continue until we get ARDY interrupt that completes the transfer. Tested with 3.8-rc4 + N900: 20 boots in a row without errors; without the patch the problem triggers after few reboots. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22i2c: omap: errata i462: fix incorrect ack for arbitration lost interruptAaro Koskinen
The errata handling function acks wrong interrupt in case of "Arbitration lost". Fix it. Discovered during code review, the real impact of the bug is unknown. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22ACPI: Check MSR valid bit before using P-state frequenciesStefan Bader
To fix incorrect P-state frequencies which can happen on some AMD systems f594065faf4f9067c2283a34619fc0714e79a98d "ACPI: Add fixups for AMD P-state figures" introduced a quirk to obtain the correct values by reading from AMD specific MSRs. This did cause a regression when running a kernel using that quirk under Xen which does (currently) not pass through MSR reads to the HW. Instead the guest gets a 0 in return. And this seems to cause a failure to initialize the ondemand governour (hard to say for sure as all P-states appear to run at the same frequency). While this should also be fixed in the hypervisor (to allow a guest to read that MSR), this patch is intended to work around the issue in the meantime. In discussion it turned out that indeed real HW/BIOSes may choose to not set the valid bit and thus mark the P-state as invalid. So this could be considered a fix for broken BIOSes that also works around the issue on Xen. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Cc: 3.7+ <stable@vger.kernel.org> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-22PM / devfreq: exynos4_bus: honor RCU lock usageNishanth Menon
OPP pointers cannot be expected to be valid beyond the boundary of rcu_read_lock and rcu_read_unlock. Unfortunately, the current exynos4 busfreq driver does not honor the usage constraint and stores the OPP pointer in struct busfreq_data. This could potentially become invalid later such as: across devfreq opp change decisions, resulting in unpredictable behavior. To fix this, we introduce a busfreq specific busfreq_opp_info structure which is used to handle OPP information. OPP information is de-referenced to voltage and frequency pairs as needed into busfreq_opp_info structure and used as needed. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-22PM / devfreq: add locking documentation for recommended_oppNishanth Menon
OPP pointers are protected by RCU locks, the pointer validity is permissible only under the section of rcu_read_lock to rcu_read_unlock Add documentation to the effect. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-22cpufreq: cpufreq-cpu0: use RCU locks around usage of OPPNishanth Menon
OPP pointer is RCU protected, hence after finding it, de-reference also should be protected with the same RCU context else the OPP pointer may become invalid. Reported-by: Jack Mitchell <jack@embed.me.uk> Tested-by: Alexander Holler <holler@ahsoftware.de> Tested-by: Jack Mitchell <jack@embed.me.uk> Acked-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-22cpufreq: OMAP: use RCU locks around usage of OPPNishanth Menon
OPP pointer is RCU protected, hence after finding it, de-reference also should be protected with the same RCU context else the OPP pointer may become invalid. Reported-by: Alexander Holler <holler@ahsoftware.de> Tested-by: Alexander Holler <holler@ahsoftware.de> Acked-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-22i2c: muxes: fix wrong use of sizeof(ptr)Laurent Navet
sizeof when applied to a pointer typed expression gives the size of the pointer The semantic patch that makes this output is available in scripts/coccinelle/misc/noderef.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22i2c: sirf: register i2c_client from dt child-nodes in probe entryBarry Song
in probe() entry of i2c_driver, set the of node of adapter and call of_i2c_register_devices to register all i2c_client from dt child-nodes Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-22i2c: mxs: Fix type of error codeFabio Estevam
cmd_err is used to handle error code, so it should not be unsigned. This fixes the following warning when building with W=1 option: drivers/i2c/busses/i2c-mxs.c: In function 'mxs_i2c_xfer_msg': drivers/i2c/busses/i2c-mxs.c:331:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org
2013-01-22regmap: fix small typo in regmap_bulk_write commentNestor Ovroy
Signed-off-by: Nestor Ovroy <novroy@riseup.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-22Merge tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Olof Johansson
fixes From Sascha Hauer: ARM i.MX fixes for -rc. This contains a single compilation fix for the CODA driver. * tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6: [media] coda: Fix build due to iram.h rename
2013-01-21Merge tag 'fixes-for-v3.8-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.8-rc5 Finally we have a build fix for fsl-mxc-udc UDC driver. We also have a fix for ep0 maxburst setting on DWC3 which could confuse the HW if we tell it we had way too many streams on that endpoint when it _has_ to be only one. cppi_dma support for MUSB got a fix when running as a module. By dropping the wrong __init annotation, the function will be available even when we're modules and we're done with .init.text section. Last, but not least, we have a fix on FunctionFS which was causing a bug on our option parsing algorithm.
2013-01-21i2c: mxs: Fix misuse init_completionMarek Vasut
The init_completion() call does reinit not only the variable carrying the flag that the completion finished, but also initialized the waitqueue associated with the completion. On the contrary, the INIT_COMPLETION() call only reinits the flag. In case there was anything still stuck in the waitqueue, subsequent call to init_completion() would be able to create possible race condition. This patch uses the proper function and moves init_completion() into .probe() call of the driver, to be issued only once. Note that such scenario is impossible, since two threads can never enter the mxs_i2c_xfer_msg(), since whole this section is protected by mutex in I2C core. This by no means allows this issue to exit though. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-20Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "A bunch of intel and radeon fixes, along with two fixes to TTM code. The correct fix for the Intel ironlake failure is in this, and should make things more stable, along with some misc radeon fixes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: ttm: on move memory failure don't leave a node dangling ttm: don't destroy old mm_node on memcpy failure Revert "drm/radeon: do not move bo to different placement at each cs" drm/i915: fix FORCEWAKE posting reads drm/i915: Invalidate the relocation presumed_offsets along the slow path drm/i915/eDP: do not write power sequence registers for ghost eDP drm/radeon: improve semaphore debugging on lockup drm/radeon: allow FP16 color clear registers on r500 drm/radeon: clear reset flags if engines are idle drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state
2013-01-21ttm: on move memory failure don't leave a node danglingDave Airlie
if we have a move notify callback, when moving fails, we call move notify the opposite way around, however this ends up with *mem containing the mm_node from the bo, which means we double free it. This is a follow on to the previous fix. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-21ttm: don't destroy old mm_node on memcpy failureDave Airlie
When we are using memcpy to move objects around, and we fail to memcpy due to lack of memory to populate or failure to finish the copy, we don't want to destroy the mm_node that has been copied into old_copy. While working on a new kms driver that uses memcpy, if I overallocated bo's up to the memory limits, and eviction failed, then machine would oops soon after due to having an active bo with an already freed drm_mm embedded in it, freeing it a second time didn't end well. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-21Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next More important fixes for 3.9: - error_state improvements to help debug the new scanline wait code added for gen6+ - bug reports started popping up :( patch from Chris Wilson. - fix a panel power sequence confusion between the eDP and lvds detection code resulting in black screens - regression introduce in 3.8 (Jani Nikula) - Chris fixed the root-cause of the ilk relocation vs. evict bug. - Another piece of cargo-culted rc6 lore from Jani, fixes up a regression where a system refused to go into rc6 after suspend sometimes. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix FORCEWAKE posting reads drm/i915: Invalidate the relocation presumed_offsets along the slow path drm/i915/eDP: do not write power sequence registers for ghost eDP drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state
2013-01-20Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module fixes and a virtio block fix from Rusty Russell: "Various minor fixes, but a slightly more complex one to fix the per-cpu overload problem introduced recently by kvm id changes." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: put modules in list much earlier. module: add new state MODULE_STATE_UNFORMED. module: prevent warning when finit_module a 0 sized file virtio-blk: Don't free ida when disk is in use
2013-01-19ACPI, APEI: Fixup incorrect 64-bit access width firmware bugLans Zhang
The bit width check was introduced by 15afae60 (ACPI, APEI: Fix incorrect APEI register bit width check and usage), and a fixup for incorrect 32-bit width memory address was given by f712c71 (ACPI, APEI: Fixup common access width firmware bug). Now there is a similar symptom: [Firmware Bug]: APEI: Invalid bit width + offset in GAR [0x12345000/64/0/3/0] Another bogus BIOS reports an incorrect 64-bit width in trigger table. Thus, apply to a similar workaround for 64-bit width memory address. Signed-off-by: Lans Zhang <jia.zhang@windriver.com> Acked-by: Gary Hade <garyhade@us.ibm.com> Acked-by: Myron Stowe <myron.stowe@redhat.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-19ACPI / processor: Get power info before updating the C-statesThomas Schlichter
acpi_processor_get_power_info() has to be called before acpi_processor_setup_cpuidle_states() to have the latest information available. This fixes the missing C-state information after AC-->DC transition. Signed-off-by: Thomas Schlichter <thomas.schlichter@web.de> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-18Merge tag 'usb-3.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are 3 USB patches for 3.8-rc4. Two of them are new device id patches, and the third fixes a reported oops in the io_ti USB serial driver" * tag 'usb-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: io_ti: Fix NULL dereference in chase_port() USB: option: add TP-LINK HSUPA Modem MA180 USB: option: blacklist network interface on ONDA MT8205 4G LTE