| Age | Commit message (Collapse) | Author |
|---|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single bugfix for an init order problem in the sun4i subarch
clockevents code"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clockevent: sun4i: Fix race condition in the probe code
|
|
Pull networking fixes from David Miller:
1) Fix BUG when decrypting empty packets in mac80211, from Ronald Wahl.
2) nf_nat_range is not fully initialized and this is copied back to
userspace, from Daniel Borkmann.
3) Fix read past end of b uffer in netfilter ipset, also from Dan
Carpenter.
4) Signed integer overflow in ipv4 address mask creation helper
inet_make_mask(), from Vincent BENAYOUN.
5) VXLAN, be2net, mlx4_en, and qlcnic need ->ndo_gso_check() methods to
properly describe the device's capabilities, from Joe Stringer.
6) Fix memory leaks and checksum miscalculations in openvswitch, from
Pravin B SHelar and Jesse Gross.
7) FIB rules passes back ambiguous error code for unreachable routes,
making behavior confusing for userspace. Fix from Panu Matilainen.
8) ieee802154fake_probe() doesn't release resources properly on error,
from Alexey Khoroshilov.
9) Fix skb_over_panic in add_grhead(), from Daniel Borkmann.
10) Fix access of stale slave pointers in bonding code, from Nikolay
Aleksandrov.
11) Fix stack info leak in PPP pptp code, from Mathias Krause.
12) Cure locking bug in IPX stack, from Jiri Bohac.
13) Revert SKB fclone memory freeing optimization that is racey and can
allow accesses to freed up memory, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (71 commits)
tcp: Restore RFC5961-compliant behavior for SYN packets
net: Revert "net: avoid one atomic operation in skb_clone()"
virtio-net: validate features during probe
cxgb4 : Fix DCB priority groups being returned in wrong order
ipx: fix locking regression in ipx_sendmsg and ipx_recvmsg
openvswitch: Don't validate IPv6 label masks.
pptp: fix stack info leak in pptp_getname()
brcmfmac: don't include linux/unaligned/access_ok.h
cxgb4i : Don't block unload/cxgb4 unload when remote closes TCP connection
ipv6: delete protocol and unregister rtnetlink when cleanup
net/mlx4_en: Add VXLAN ndo calls to the PF net device ops too
bonding: fix curr_active_slave/carrier with loadbalance arp monitoring
mac80211: minstrel_ht: fix a crash in rate sorting
vxlan: Inline vxlan_gso_check().
can: m_can: update to support CAN FD features
can: m_can: fix incorrect error messages
can: m_can: add missing delay after setting CCCR_INIT bit
can: m_can: fix not set can_dlc for remote frame
can: m_can: fix possible sleep in napi poll
can: m_can: add missing message RAM initialization
...
|
|
Pull drm fixes from Dave Airlie:
"Just two radeon and two intel fixes: endian and regression fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: fix endian swapping in vbios fetch for tdp table
drm/radeon: disable native backlight control on pre-r6xx asics (v2)
drm/i915: Kick fbdev before vgacon
drm/i915: drop WaSetupGtModeTdRowDispatch:snb
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI power management fix from Rafael Wysocki:
"This is just a one-liner fixing a regression introduced in 3.13 that
broke system suspend on some Chromebooks.
On those machines there are ACPI device objects for some I2C devices
that can wake up the system from sleep states, but that is done via a
platform-specific mechanism and the ACPI objects don't contain any
wakeup-related information. When we started to use ACPI power
management with those devices (which happened during the 3.13 cycle),
their configuration confused the ACPI PM layer that returned error
codes from suspend callbacks for them causing system suspend to fail.
However, the ACPI PM layer can safely ignore the wakeup setting from a
device driver if the ACPI object corresponding to the device in
question doesn't contain wakeup information in which case the driver
itself is responsible for setting up the device for system wakeup"
* tag 'pm+acpi-3.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PM: Ignore wakeup setting if the ACPI companion can't wake up
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"DeviceTree fixes for 3.18:
- two fixes for OF selftest code
- fix for PowerPC address parsing to disable work-around except on
old PowerMACs
- fix a crash when earlycon is enabled, but no device is found
- DT documentation fixes and missing vendor prefixes
All but the doc updates are also for stable"
* tag 'devicetree-fixes-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/selftest: Fix testing when /aliases is missing
of/selftest: Fix off-by-one error in removal path
documentation: pinctrl bindings: Fix trivial typo 'abitrary'
devicetree: bindings: Add vendor prefix for Micron Technology, Inc.
of: Add vendor prefix for Chips&Media, Inc.
of/base: Fix PowerPC address parsing hack
devicetree: vendor-prefixes.txt: fix whitespace
of: Fix crash if an earlycon driver is not found
of/irq: Drop obsolete 'interrupts' vs 'interrupts-extended' text
of: Spelling s/stucture/structure/
devicetree: bindings: add sandisk to the vendor prefixes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are fixes for an issue with 64-bit PCI bus addresses on 32-bit
PAE kernels, an APM X-Gene problem (it depended on a generic change we
removed before merging), a fix for my hotplug device configuration
changes, and a devicetree documentation update.
Resource management:
- Support 64-bit bridge windows if we have 64-bit dma_addr_t (Yinghai Lu)
PCI device hotplug:
- Apply _HPX Link Control settings to all devices with a link (Yinghai Lu)
Generic host bridge driver:
- Add DT binding for "linux,pci-domain" property (Lucas Stach)
APM X-Gene:
- Assign resources to bus before adding new devices (Duc Dang)"
* tag 'pci-v3.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Support 64-bit bridge windows if we have 64-bit dma_addr_t
PCI: Apply _HPX Link Control settings to all devices with a link
PCI: Add missing DT binding for "linux,pci-domain" property
PCI: xgene: Assign resources to bus before adding new devices
|
|
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the target-pending fixes queued for v3.18-rc6.
The highlights include:
- target-core OOPs fix with tcm_qla2xxx + vxworks FC initiators +
zero length SCSI commands having a transfer direction set. (Roland
+ Craig Watson)
- vhost-scsi OOPs fix to explicitly prevent WWPN endpoint configfs
group removal while qemu still has an active reference. (Paolo +
nab)
- ib_srpt fix for RDMA hardware with lower srp_sq_size limits.
(Bart)
- two ib_isert work-arounds for running on ocrdma hardware (Or + Sagi
+ Chris)
- iscsi-target discovery portal typo + SPC-3 PR Preempt SA key
matching fix (Steve)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
IB/isert: Adjust CQ size to HW limits
target: return CONFLICT only when SA key unmatched
iser-target: Handle DEVICE_REMOVAL event on network portal listener correctly
ib_isert: Add max_send_sge=2 minimum for control PDU responses
srp-target: Retry when QP creation fails with ENOMEM
iscsi-target: return the correct port in SendTargets
vhost-scsi: Take configfs group dependency during VHOST_SCSI_SET_ENDPOINT
target: Don't call TFO->write_pending if data_length == 0
|
|
Pull dmaengine fixes from Vinod Koul:
"We have couple of fixes for dmaengine queued up:
- dma mempcy fix for dma configuration of sun6i by Maxime
- pl330 fixes: First the fixing allocation for data buffers by Liviu
and then Jon's fixe for fifo width and usage"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: Fix allocation size for PL330 data buffer depth.
dmaengine: pl330: Limit MFIFO usage for memcpy to avoid exhausting entries
dmaengine: pl330: Align DMA memcpy operations to MFIFO width
dmaengine: sun6i: Fix memcpy operation
|
|
We currently trigger BUG when VIRTIO_NET_F_CTRL_VQ
is not set but one of features depending on it is.
That's not a friendly way to report errors to
hypervisors.
Let's check, and fail probe instead.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
pull request: wireless 2014-11-20
Please full this little batch of fixes intended for the 3.18 stream!
For the mac80211 patch, Johannes says:
"Here's another last minute fix, for minstrel HT crashing
depending on the value of some uninitialised stack."
On top of that...
Ben Greear fixes an ath9k regression in which a BSSID mask is
miscalculated.
Dmitry Torokhov corrects an error handling routing in brcmfmac which
was checking an unsigned variable for a negative value.
Johannes Berg avoids a build problem in brcmfmac for arches where
linux/unaligned/access_ok.h and asm/unaligned.h conflict.
Mathy Vanhoef addresses another brcmfmac issue so as to eliminate a
use-after-free of the URB transfer buffer if a timeout occurs.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Peer priority groups were being reversed, but this was missed in the previous
fix sent out for this issue.
v2 : Previous patch was doing extra unnecessary work, result is the same.
Please ignore previous patch
Fixes : ee7bc3cdc270 ('cxgb4 : dcb open-lldp interop fixes')
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pptp_getname() only partially initializes the stack variable sa,
particularly only fills the pptp part of the sa_addr union. The code
thereby discloses 16 bytes of kernel stack memory via getsockname().
Fix this by memset(0)'ing the union before.
Cc: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
into drm-fixes
fix one regression and one endian issue.
* 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix endian swapping in vbios fetch for tdp table
drm/radeon: disable native backlight control on pre-r6xx asics (v2)
|
|
This is a specific implementation, <asm/unaligned.h> is the
multiplexer that has the arch-specific knowledge of which
of the implementations needs to be used, so include that.
This issue was revealed by kbuild testing
when <asm/unaligned.h> was added in <linux/ieee80211.h>
resulting in redefinition of get_unaligned_be16 (and
probably others).
Cc: stable@vger.kernel.org # v3.17
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Value needs to be swapped on BE.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Just use the acpi interface. That's what windows uses on this
generation and it's the only thing that seems to work reliably
on these generation parts.
You can still force the native backlight interface by setting
radeon.backlight=1
Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=88501
v2: merge into above if/else block
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The /aliases node isn't always present in the device tree, but the
unittest code assumes that /aliases is there. Add a check when inserting
the testcase data to see if of_aliases needs to be updated, and undo the
settings when the nodes are removed.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com>
Cc: <stable@vger.kernel.org>
|
|
isert has an issue of trying to create a CQ with more CQEs than are
supported by the hardware, that currently results in failures during
isert_device creation during first session login.
This is the isert version of the patch that Minh Tran submitted for
iser, and is simple a workaround required to function with existing
ocrdma hardware.
Signed-off-by: Chris Moore <chris.moore@emulex.com>
Reviewied-by: Sagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
As reported by Dmitry, on some Chromebooks there are devices with
corresponding ACPI objects and with unusual system wakeup
configuration. Namely, they technically are wakeup-capable, but the
wakeup is handled via a platform-specific out-of-band mechanism and
the ACPI PM layer has no information on the wakeup capability. As
a result, device_may_wakeup(dev) called from acpi_dev_suspend_late()
returns 'true' for those devices, but the wakeup.flags.valid flag is
unset for the corresponding ACPI device objects, so acpi_device_wakeup()
reproducibly fails for them causing acpi_dev_suspend_late() to return
an error code. The entire system suspend is then aborted and the
machines in question cannot suspend at all.
Address the problem by ignoring the device_may_wakeup(dev) return
value in acpi_dev_suspend_late() if the ACPI companion of the device
being handled has wakeup.flags.valid unset (in which case it is clear
that the wakeup is supposed to be handled by other means).
This fixes a regression introduced by commit a76e9bd89ae7 (i2c:
attach/detach I2C client device to the ACPI power domain) as the
affected systems could suspend and resume successfully before that
commit.
Fixes: a76e9bd89ae7 (i2c: attach/detach I2C client device to the ACPI power domain)
Reported-by: Dmitry Torokhov <dtor@chromium.org>
Reviewed-by: Dmitry Torokhov <dtor@chromium.org>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
cxgb4i was returning wrong error and not releasing module reference if remote
end abruptly closed TCP connection. This prevents the cxgb4 network module from
being unloaded, further affecting other network drivers dependent on cxgb4
Sending to net as this affects all cxgb4 based network drivers.
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Aaron reported that a 32-bit x86 kernel with Physical Address Extension
(PAE) support complains about bridge prefetchable memory windows above 4GB:
pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff]
...
pci 0000:03:00.0: reg 0x10: [mem 0x383fffc00000-0x383fffdfffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0x383fffe04000-0x383fffe07fff 64bit pref]
pci 0000:03:00.1: reg 0x10: [mem 0x383fffa00000-0x383fffbfffff 64bit pref]
pci 0000:03:00.1: reg 0x20: [mem 0x383fffe00000-0x383fffe03fff 64bit pref]
pci 0000:00:02.2: PCI bridge to [bus 03-04]
pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.2: bridge window [mem 0x91900000-0x91cfffff]
pci 0000:00:02.2: can't handle 64-bit address space for bridge
In this kernel, unsigned long is 32 bits and dma_addr_t is 64 bits.
Previously we used "unsigned long" to hold the bridge window address. But
this is a bus address, so we should use dma_addr_t instead.
Use dma_addr_t to hold the bridge window base and limit.
The question of whether the CPU can actually *address* the window is
separate and depends on what the physical address space of the CPU is and
whether the host bridge does any address translation.
[bhelgaas: fix "shift count > width of type", changelog, stable tag]
Fixes: d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=88131
Reported-by: Aaron Ma <mapengyu@gmail.com>
Tested-by: Aaron Ma <mapengyu@gmail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.14+
|
|
git://gitorious.org/linux-can/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2014-11-18
this is a pull request of 17 patches for net/master for the v3.18 release
cycle.
The last patch of this pull request ("can: m_can: update to support CAN FD
features") adds, as the description says, a new feature to the m_can driver. As
the m_can driver has been added in v3.18 there is no risk of causing a
regression. Give me a note if this is not okay and I'll create a new pull
request without it.
There is a patch for the CAN infrastructure by Thomas Körper which fixes
calling kfree_skb() from interrupt context. Roman Fietze fixes a typo also in
the infrastructure. A patch by Dong Aisheng adds a generic helper function to
tell if a skb is normal CAN or CAN-FD frame. Alexey Khoroshilov of the Linux
Driver Verification project fixes a memory leak in the esd_usb2 driver. Two
patches by Sudip Mukherjee remove unused variables and fixe the signess of a
variable. Three patches by me add the missing .ndo_change_mtu callback to the
xilinx_can, rcar_can and gs_usb driver.
The remaining patches improve the m_can driver: David Cohen adds the missing
CONFIG_HAS_IOMEM dependency. Dong Aisheng provides 6 bugfix patches (most
important: missing RAM init, sleep in NAPI poll, dlc in RTR). While the last of
his patches adds CAN FD support to the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is currently missing, which results in a crash when one attempts
to set VXLAN tunnel over the mlx4_en when acting as PF.
[ 2408.785472] BUG: unable to handle kernel NULL pointer dereference at (null)
[...]
[ 2408.994104] Call Trace:
[ 2408.996584] [<ffffffffa021f7f5>] ? vxlan_get_rx_port+0xd6/0x103 [vxlan]
[ 2409.003316] [<ffffffffa021f71f>] ? vxlan_lowerdev_event+0xf2/0xf2 [vxlan]
[ 2409.010225] [<ffffffffa0630358>] mlx4_en_start_port+0x862/0x96a [mlx4_en]
[ 2409.017132] [<ffffffffa063070f>] mlx4_en_open+0x17f/0x1b8 [mlx4_en]
While here, make sure to invoke vxlan_get_rx_port() only when VXLAN
offloads are actually enabled and not when they are only supported.
Reported-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 6fde8f037e60 ("bonding: fix locking in
bond_loadbalance_arp_mon()") we can have a stale bond carrier state and
stale curr_active_slave when using arp monitoring in loadbalance modes. The
reason is that in bond_loadbalance_arp_mon() we can't have
do_failover == true but slave_state_changed == false, whenever do_failover
is true then slave_state_changed is also true. Then the following piece
from bond_loadbalance_arp_mon():
if (slave_state_changed) {
bond_slave_state_change(bond);
if (BOND_MODE(bond) == BOND_MODE_XOR)
bond_update_slave_arr(bond, NULL);
} else if (do_failover) {
block_netpoll_tx();
bond_select_active_slave(bond);
unblock_netpoll_tx();
}
will execute only the first branch, always and regardless of do_failover.
Since these two events aren't related in such way, we need to decouple and
consider them separately.
For example this issue could lead to the following result:
Bonding Mode: load balancing (round-robin)
*MII Status: down*
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
ARP Polling Interval (ms): 100
ARP IP target/s (n.n.n.n form): 192.168.9.2
Slave Interface: ens12
*MII Status: up*
Speed: 10000 Mbps
Duplex: full
Link Failure Count: 2
Permanent HW addr: 00:0f:53:01:42:2c
Slave queue ID: 0
Slave Interface: eth1
*MII Status: up*
Speed: Unknown
Duplex: Unknown
Link Failure Count: 70
Permanent HW addr: 52:54:00:2f:0f:8e
Slave queue ID: 0
Since some interfaces are up, then the status of the bond should also be
up, but it will never change unless something invokes bond_set_carrier()
(i.e. enslave, bond_select_active_slave etc). Now, if I force the
calling of bond_select_active_slave via for example changing
primary_reselect (it can change in any mode), then the MII status goes to
"up" because it calls bond_select_active_slave() which should've been done
from bond_loadbalance_arp_mon() itself.
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Ding Tianhong <dingtianhong@huawei.com>
Fixes: 6fde8f037e60 ("bonding: fix locking in bond_loadbalance_arp_mon()")
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Veaceslav Falico <vfalico@gmail.com>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Acked-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into for-next
Pull the beginning of seq_file cleanup from Steven:
"I'm looking to clean up the seq_file code and to eventually merge the
trace_seq code with seq_file as well, since they basically do the same thing.
Part of this process is to remove the return code of seq_printf() and friends
as they are rather inconsistent. It is better to use the new function
seq_has_overflowed() if you want to stop processing when the buffer
is full. Note, if the buffer is full, the seq_file code will throw away
the contents, allocate a bigger buffer, and then call your code again
to fill in the data. The only thing that breaking out of the function
early does is to save a little time which is probably never noticed.
I started with patches from Joe Perches and modified them as well.
There's many more places that need to be updated before we can convert
seq_printf() and friends to return void. But this patch set introduces
the seq_has_overflowed() and does some initial updates."
|
|
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The removal path for selftest data has an off by one error that causes
the code to dereference beyond the end of the nodes[] array on the first
pass through. The old code only worked by chance on a lot of platforms,
but the bug was recently exposed on aarch64.
The fix is simple. Decrement the node count before dereferencing, not
after.
Reported-by: Kevin Hilman <khilman@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com>
Cc: <stable@vger.kernel.org> # v3.17+
|
|
The interrupts were activated and the handler registered before the clockevent
was registered in the probe function.
The interrupt handler, however, was making the assumption that the clockevent
device was registered.
That could cause a null pointer dereference if the timer interrupt was firing
during this narrow window.
Fix that by moving the clockevent registration before the interrupt is enabled.
Reported-by: Roman Byshko <rbyshko@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Suggested-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bosch M_CAN is CAN FD capable device. This patch implements the CAN
FD features include up to 64 bytes payload and bitrate switch function.
1) Change the Rx FIFO and Tx Buffer to 64 bytes for support CAN FD
up to 64 bytes payload. It's backward compatible with old 8 bytes
normal CAN frame.
2) Allocate can frame or canfd frame based on EDL bit
3) Bitrate Switch function is disabled by default and will be enabled
according to CANFD_BRS bit in cf->flags.
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fix a few error messages.
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The spec mentions there may be a delay until the value written to INIT can be
read back due to the synchronization mechanism between the two clock domains.
But it does not indicate the exact clock cycles needed. The 5us delay is a
test value and seems ok.
Without the delay, CCCR.CCE bit may fail to be set and then the initialization
fail sometimes when do repeatly up and down.
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The original code missed to set the cf->can_dlc in the RTR case, so add it.
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The m_can_get_berr_counter function can sleep and it may be called in napi poll
function. Rework it to fix the following warning.
root@imx6qdlsolo:~# cangen can0 -f -L 12 -D 112233445566778899001122
[ 1846.017565] m_can 20e8000.can can0: entered error warning state
[ 1846.023551] ------------[ cut here ]------------
[ 1846.028216] WARNING: CPU: 0 PID: 560 at kernel/locking/mutex.c:867 mutex_trylock+0x218/0x23c()
[ 1846.036889] DEBUG_LOCKS_WARN_ON(in_interrupt())
[ 1846.041263] Modules linked in:
[ 1846.044594] CPU: 0 PID: 560 Comm: cangen Not tainted 3.17.0-rc4-next-20140915-00010-g032d018-dirty #477
[ 1846.054033] Backtrace:
[ 1846.056557] [<80012448>] (dump_backtrace) from [<80012728>] (show_stack+0x18/0x1c)
[ 1846.064180] r6:809a07ec r5:809a07ec r4:00000000 r3:00000000
[ 1846.069966] [<80012710>] (show_stack) from [<806c9ee0>] (dump_stack+0x8c/0xa4)
[ 1846.077264] [<806c9e54>] (dump_stack) from [<8002aa78>] (warn_slowpath_common+0x70/0x94)
[ 1846.085403] r6:806cd1b0 r5:00000009 r4:be1d5c20 r3:be07b0c0
[ 1846.091204] [<8002aa08>] (warn_slowpath_common) from [<8002aad4>] (warn_slowpath_fmt+0x38/0x40)
[ 1846.099951] r8:8119106c r7:80515aa4 r6:be027000 r5:00000001 r4:809d1df4
[ 1846.106830] [<8002aaa0>] (warn_slowpath_fmt) from [<806cd1b0>] (mutex_trylock+0x218/0x23c)
[ 1846.115141] r3:80851c88 r2:8084fb74
[ 1846.118804] [<806ccf98>] (mutex_trylock) from [<80515aa4>] (clk_prepare_lock+0x14/0xf4)
[ 1846.126859] r8:00000040 r7:be1d5cec r6:be027000 r5:be255800 r4:be027000
[ 1846.133737] [<80515a90>] (clk_prepare_lock) from [<80517660>] (clk_prepare+0x14/0x2c)
[ 1846.141583] r5:be255800 r4:be027000
[ 1846.145272] [<8051764c>] (clk_prepare) from [<8041ff14>] (m_can_get_berr_counter+0x20/0xd4)
[ 1846.153672] r4:be255800 r3:be07b0c0
[ 1846.157325] [<8041fef4>] (m_can_get_berr_counter) from [<80420428>] (m_can_poll+0x310/0x8fc)
[ 1846.165809] r7:bd4dc540 r6:00000744 r5:11300000 r4:be255800
[ 1846.171590] [<80420118>] (m_can_poll) from [<8056a468>] (net_rx_action+0xcc/0x1b4)
[ 1846.179204] r10:00000101 r9:be255ebc r8:00000040 r7:be7c3208 r6:8097c100 r5:be7c3200
[ 1846.187192] r4:0000012c
[ 1846.189779] [<8056a39c>] (net_rx_action) from [<8002deec>] (__do_softirq+0xfc/0x2c4)
[ 1846.197568] r10:00000101 r9:8097c088 r8:00000003 r7:8097c080 r6:40000001 r5:8097c08c
[ 1846.205559] r4:00000020
[ 1846.208144] [<8002ddf0>] (__do_softirq) from [<8002e194>] (do_softirq+0x7c/0x88)
[ 1846.215588] r10:00000000 r9:bd516a60 r8:be18ce00 r7:00000000 r6:be255800 r5:8056c0ec
[ 1846.223578] r4:60000093
[ 1846.226163] [<8002e118>] (do_softirq) from [<8002e288>] (__local_bh_enable_ip+0xe8/0x10c)
[ 1846.234386] r4:00000200 r3:be1d4000
[ 1846.238036] [<8002e1a0>] (__local_bh_enable_ip) from [<8056c108>] (__dev_queue_xmit+0x314/0x6b0)
[ 1846.246868] r6:be255800 r5:bd516a00 r4:00000000 r3:be07b0c0
[ 1846.252645] [<8056bdf4>] (__dev_queue_xmit) from [<8056c4b8>] (dev_queue_xmit+0x14/0x18)
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The M_CAN message RAM is usually equipped with a parity or ECC functionality.
But RAM cells suffer a hardware reset and can therefore hold arbitrary content
at startup - including parity and/or ECC bits.
To prevent the M_CAN controller detecting checksum errors when reading
potentially uninitialized TX message RAM content to transmit CAN frames the TX
message RAM has to be written with (any kind of) initial data.
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
m_can uses io memory which makes it not compilable on architectures
without HAS_IOMEM such as UML:
drivers/built-in.o: In function `m_can_plat_probe':
m_can.c:(.text+0x218cc5): undefined reference to `devm_ioremap_resource'
m_can.c:(.text+0x218df9): undefined reference to `devm_ioremap'
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use common can_change_mtu function.
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use common can_change_mtu function.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
We have a historical hack that treats missing ranges properties as the
equivalent of an empty one. This is needed for ancient PowerMac "bad"
device-trees, and shouldn't be enabled for any other PowerPC platform,
otherwise we get some nasty layout of devices in sysfs or even
duplication when a set of otherwise identically named devices is
created multiple times under a different parent node with no ranges
property.
This fix is needed for the PowerNV i2c busses to be exposed properly
and will fix a number of other embedded cases.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
__earlycon_of_table_sentinel.compatible is a char[128], not a pointer, so
it will never be NULL. Checking it against NULL causes the match loop to
run past the end of the array, and eventually match a bogus entry, under
the following conditions:
- Kernel command line specifies "earlycon" with no parameters
- DT has a stdout-path pointing to a UART node
- The UART driver doesn't use OF_EARLYCON_DECLARE (or maybe the console
driver is compiled out)
Fix this by checking to see if match->compatible is a non-empty string.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Use common can_change_mtu function.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use common can_change_mtu function.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The variable err was of the type u32. It was being compared with < 0, and being
an unsigned variable the comparison would have been always false.
Moreover, err was getting the return value from set_reset_mode() and
xcan_set_bittiming(), and both are returning int.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
these variable were only assigned some values, but then never
reused again.
so they are safe to be removed.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
It seems struct esd_usb2 dev is not deallocated on disconnect. The patch adds
the missing deallocation.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch fixes a typo in CAN's dev.c:
CIA -> CiA
which stands for CAN in Automation.
Signed-off-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
