Age | Commit message (Collapse) | Author |
|
We call intel_modeset_setup_hw_state() along two paths, driver
load/resume and after a lid event notification. During initialisation of
the driver, it is imperative that we reset the config state. This
correctly sets up the initial connector statuses and prepares the
hardware for a thorough probing. However, during a lid event, we only
want to undo the damage caused by the bios by resetting our last known
mode. In this cirumstance, we do not want to clobber our desired state.
In order to try and keep sanity between the config state and our own
tracking, do the drm_mode_config_reset() first along the load/resume
paths before reading out the hw state and apply any definite known
corrections.
v2: "As discussed on irc I don't think we should force the connector
state to anything here: Imo connector->status should reflect what we
believe to be the true output connection state, whereas connector->encoder
reflects whether this connector is wired up to a pipe. And since we no
longer reject modeset on disconnected connectors and never nuked the pipe
if the connector gets disconnected there's no reason for that - such policy
is userspace's job.
This regression has been introduced in
commit 2e9388923e83bc4e2726f170a984621f1d582e77
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Oct 11 20:08:24 2012 +0200
drm/i915/crt: explicitly set up HOTPLUG_BITS on resume"
so sayeth Daniel.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org (v3.8 and later)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Some lower level things get angry if we don't have modeset locks
during intel_modeset_setup_hw_state(). Actually the resume and
lid_notify codepaths alreday hold the locks, but the init codepath
doesn't, so fix that.
Note: This slipped through since we only disable pipes if the
plane/pipe linking doesn't match. Which is only relevant on older
gen3 mobile machines, if the BIOS fails to set up our preferred
linking.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Tested-and-reported-by: Paul Bolle <pebolle@tiscali.nl>
[danvet: Add note now that I could confirm my theory with the log
files Paul Bolle provided.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
During the vmap() routine for the dma-buf, we first grab the pages and
then try to allocate a temporary array to pass to the vmap(). However,
the shrinker can and will reap any object that is unbound if the
allocation for the array first fails. This includes the object which we
are attempting to vmap(). The solution is to mark the object's pages as
pinned whilst we try the allocation to prevent the use-after-free
introduced by the potential shrinkage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The MI_PREDICATE_RESULT_2 register exits only on HSW. On other
platforms the same offset is either reserved, or contains some
other register. So write the register only on HSW.
This regression has been introduced in
commit 9435373ef8870e0a84b6fec0ad89b952bf3097fa
Author: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Date: Wed Aug 28 16:45:46 2013 -0300
drm/i915: Report enabled slices on Haswell GT3
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Add regression notice.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The ring scratch pages don't have a PPGTT mapping, so the DERRM SRM
should target the global GTT instead.
v2: Add MI_SRM_LRM_GLOBAL_GTT define for -fixes
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
When I submitted the first patch adding these force wake functions,
Chris Wilson observed that I was using the wrong functions, so I sent
a second version of the patch to correct this problem. The problem is
that v1 was merged instead of v2.
I was able to notice the problem when running the
debugfs-forcewake-user subtest of pm_pc8 from intel-gpu-tools.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We were miscalculating the pipe CSC post offset for the full->limited
range conversion. The resulting post offset was double what it was
supposed to be, which caused blacks to come out grey when using
limited range output on HSW+.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71769
Cc: stable@vger.kernel.org
Tested-by: Lauri Mylläri <lauri.myllari@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Reduce the eDP detection to just checking if it's port A, or if
the VBT tells us that the port is eDP for the other ports.
Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
VLV can have eDP on either port B or C, or even both. Based on the
VBT spec, intel_dpd_is_edp() should work on VLV too, assuming we
check the correct ports.
So instead of hardcoding port D, rename the function to
intel_dp_is_edp() and pass the port as a parameter, and use it
on VLV ports B and C.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71051
Tested-by: Robert Hooker <robert.hooker@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Wrestle the patch to apply and compile properly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This value is more correct, and matches what we read out in the fastboot
code. Without this, the watermark code will panic after the first mode
setting activity after a fastboot.
v2: fix up HSW ->clock usage too (Ville)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
As the execbuffer dispatch grows ever more complex and involves multiple
stages of moving objects into the aperture, we need to take greater care
that we do not evict our execbuffer objects prior to dispatch. This is
relatively simple as we can just keep the objects pinned for not just
the relocation but until we are finished.
One such example is the possibility of the context switch causing an
eviction or hitting the shrinker in order to fit its object into the
aperture.
Link: http://lists.freedesktop.org/archives/intel-gfx/2013-November/036166.html
Reported-by: "Siluvery, Arun" <arun.siluvery@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Add the additional explanations from Chris to the commit
message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This is just a theoretical issue, but we need to do this to prevent the
WARN in pipe_from_connector at suspend time.
This regression has been introduce in
commit 7bd688cd66db93f6430f6e2b3145ee5686daa315
Author: Jani Nikula <jani.nikula@intel.com>
Date: Fri Nov 8 16:48:56 2013 +0200
drm/i915: handle backlight through chip specific functions
https://bugs.freedesktop.org/show_bug.cgi?id=71978
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We have conflicting benchmark data that suggest either age 0 or age 3 is
better. However, the earlier benchmark on which we based the switch to
age 0
(commit 0d8ff15e9a15f2b393e53337a107b7a1e5919b6d
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Thu Jul 4 11:02:03 2013 -0700
drm/i915/hsw: Set correct Haswell PTE encodings)
actually seems to prefer the default PTE encoding as age 3. Presumably,
this is in part due to the use of MOCS to override the PTE encodings
when appropriate.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69870
Tested-by: mengmeng.meng@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Eric Anholt <eric@anholt.net
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Similar to
commit fdbc3b1f639bb2cbfb32c612b2699e0ba373317d
Author: Jani Nikula <jani.nikula@intel.com>
Date: Tue Nov 12 17:10:13 2013 +0200
drm/i915/dp: set sink to power down mode on dp disable
but for DDI, where we've never done this.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This regression has been introduced in
commit 4fe8590a921d0b2e36e542dbfa89a8c5993f5a3f
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Sep 4 18:25:22 2013 +0300
drm/i915: Use adjusted_mode appropriately when computing watermarks
I guess we should renable the enabled local variable into something a
notch more descriptive, but that's something for -next.
The effect on my i945gme netbook is pretty severe amounts of underruns
- usually the very first pixel gets used for the entire screeen.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Haswell's DDI encoders have their own ->get_config callback and in
commit c6cd2ee2d59111a07cd9199564c9bdcb2d11e5cf
Author: Jani Nikula <jani.nikula@intel.com>
Date: Mon Oct 21 10:52:07 2013 +0300
drm/i915/dp: workaround BIOS eDP bpp clamping issue
we've forgotten to replicate this hack. So let's do it that.
Note for backporters: The above commit and all it's depencies need to
be backported first.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71049
Cc: stable@vger.kernel.org
Tested-by: Gökçen Eraslan <gokcen.eraslan@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
If the hardware does not support package C8, then do not even schedule
work to enable it. Thereby we can eliminate a bunch of dangerous work.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We need to hold the pc8 lock around toggling the value of gpu_idle.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We must have one to fill out the adjusted_mode.crtc_clock. And with
the tv encoder fixed up every encoder we have has a ->get_config
callback. So we can drop the checks.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We need this to properly fill in adjusted_mode.crtc_clock, otherwise
the state checker gets unhappy. This seems to have been forgotten in
the big clock rework in
commit 18442d08786472c63a0a80c27f92b033dffc26de
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri Sep 13 16:00:08 2013 +0300
drm/i915: Fix port_clock and adjusted_mode.clock readout all over
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Some BIOS just leak the forcewak bits, which we clean up.
Unfortunately this has been broken in
commit 521198a2e7095c8c7daa8d7d3a76a110c346be6f
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Fri Aug 23 16:52:30 2013 +0300
drm/i915: sanitize forcewake registers on reset
To make this work both for resets and for BIOS takeover just add the
forcewake clearing call back to intel_uncore_early_sanitize.
We need to clear the forcewake in early sanitize so that the forcewak
dance in intel_uncore_init (to figure out whether we have mt or legacy
forcewake on ivb) works. That cleanup fits in nicely with the general
topic of early_sanitize to prepare for the very first mmio ops.
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Jörg Otte <jrg.otte@gmail.com>
References: https://lkml.org/lkml/2013/11/16/40
Cc: stable@vger.kernel.org (for 3.12 only)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This reverts commit 351aa5666d02062b52329bcfe4bcf9d1f882fba9.
It breaks rc6 on at least one snb machine. Since we don't yet have a
report for ivb let's keep it there for now.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71656
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: erik@vontaene.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Apparently they need the same treatment as primary planes. This fixes
modesetting failures because of stuck cursors (!) on Thomas' i830M
machine.
I've figured while at it I'll also roll it out for the ivb 3 pipe
version of this function. I didn't do this for i845/i865 since Bspec
says the update mechanism works differently, and there's some
additional rules about what can be updated in which order.
Tested-by: Thomas Richter <thor@math.tu-berlin.de>
Cc: stable@vger.kernel.org
Cc: Thomas Richter <thor@math.tu-berlin.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We had been using a DMI table workaround to select the right
frequency for devices, but this is fragile and must be updated
with every new platform.
Instead the default case when VBT is missing is changed to use
120MHz clock for LVDS SSC for these generations.
The docs for 2010-Core, SandyBridge, and IvyBridge all indicate
that the reference frequency for LVDS is 120MHz:
"2010 Core"
http://intellinuxgraphics.org/IHD_OS_Vol3_Part3r2.pdf
page 38
Reference Frequency: 120MHz for CRT and LVDS. 100MHz for the FDI.
"2011 SandyBridge"
http://intellinuxgraphics.org/documentation/SNB/IHD_OS_Vol3_Part3.pdf
page 33
Reference Frequency: 120MHz for CRT, HDMI, LVDS. 100MHz for the FDI.
"2012 IvyBridge"
http://intellinuxgraphics.org/documentation/IVB/IHD_OS_Vol3_Part4.pdf
page 27
Reference Frequency: 120 MHz for CRT, HDMI, LVDS, 100MHz for the FDI.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
[olof: Fixup for recent base, switched from if/else to single call]
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We used to put the local sink and any downstream sinks to power down
mode at disable or dpms off using the DPCD SET_POWER register, until
this was broken by
commit e8cb455876fa8f67c6aba394d0a14b697bf04cc3
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Jul 1 13:05:48 2012 +0200
drm/i915/dp: convert to encoder disable/enable
Fix it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
into drm-next
One last patch I keep forgetting to include. Fix for EDID quirk
handling. Been on the list and reviewed for several months now,
I just keep forgetting about it.
* 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux:
drm/edid: compare actual vrefresh for all modes for quirks
|
|
git://people.freedesktop.org/~danvet/drm-intel into drm-next
Just one patch to fix compile fail for CONFIG_ACPI=n. Figured I better
send this out quickly to minimize the broken build span. Otherwise no
bugfixes (besides some bdw stuff) anywhere in sight.
* tag 'drm-intel-fixes-2013-11-12' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915/opregion: fix build error on CONFIG_ACPI=n
|
|
into drm-next
The page-prot bit fix.
* 'ttm-next-3.13' of git://people.freedesktop.org/~thomash/linux:
drm/ttm: Fix vma page_prot bit manipulation
|
|
git://people.freedesktop.org/~thomash/linux into drm-next
A resource eviction fix, and a fix for compilation / sparse problems
from the previous pull.
* 'vmwgfx-next-3.13' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Fix a couple of compile / sparse warnings and errors
drm/vmwgfx: Resource evict fixes
|
|
Fix a long-standing TTM issue where we manipulated the vma page_prot
bits while mmap_sem was taken in read mode only. We now make a local
copy of the vma structure which we pass when we set the ptes.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
|
|
Fixes
*) an implicit function declaration on mips,
*) a defined but not used label on !CONFIG_INTEL_IOMMU
*) Hopefully a couple of sparse warnings where we implicitly typecast
integer to __le32 and vice versa.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
|
|
Fix an error message that was incorrectly blaming device resource id
shortage.
Also make sure we correctly catch resource eviction errors, that
could otherwise lead to evictable resources temporarily not being on the
LRU list.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
|
|
The vrefresh field of the mode is 0 for most modes
fetched from the EDID (e.g., established timings).
When dealing with monitors that have a bogus preferred
mode, we may not always select the mode we want because
we compare the target refresh to the mode's vrefresh which
is 0 in a lot of cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
SDVO support for minnowboard
* 'gma500-next' of git://github.com/patjak/drm-gma500:
drm/gma500/mrst: Add SDVO to output init
drm/gma500/mrst: Don't blindly guess a mode for LVDS
drm/gma500/mrst: Setup GMBUS for oaktrail/mrst
drm/gma500/mrst: Replace WMs and chickenbits with values from EMGD
drm/gma500/mrst: Add aux register writes to SDVO
drm/gma500/mrst: Properly route oaktrail hdmi hooks
drm/gma500/mrst: Add aux register writes when programming pipe
drm/gma500/mrst: Add SDVO clock calculation
drm/gma500: Add aux device support for gmbus
drm/gma500: Add support for aux pci vdc device
drm/gma500: Add chip specific sdvo masks
drm/gma500: Add Minnowboard to the IS_MRST() macro
|
|
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
clk_disable_unprepare() to get ready for the migration to the common
clock framework.
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://people.freedesktop.org/~danvet/drm-intel into drm-next
So here's the Broadwell pull request. From a kernel driver pov there's
two areas with big changes in Broadwell:
- Completely new enumerated interrupt bits. On the plus side it now looks
fairly unform and sane.
- Completely new pagetable layout.
To ensure minimal impact on existing platforms we've refactored both the
irq and low-level gtt handling code a lot in anticipation of the bdw push.
So now bdw enabling in these areas just plugs in a bunch of vfuncs.
Otherwise it's all fairly harmless adjusting of switch cases and
if-ladders to shovel bdw into the right blocks. So minimized impact on
existing platforms. I've also merged the bdw-stage1 branch into our
-nightly integration branch for the past week to make sure we don't break
anything.
Note that there's still quite a flurry or patches floating around, but
I've figured I'll push this out. I plan to keep the bdw fixes separate
from my usual -fixes stream so that you can reject them easily in case it
still looks like too much churn. Also, bdw is for now hidden behind the
preliminary hw enabling module option. So there's no real pressure to get
follow-up patches all into 3.13.
* tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel: (75 commits)
drm/i915: Mask the vblank interrupt on bdw by default
drm/i915: Wire up cpu fifo underrun reporting support for bdw
drm/i915: Optimize gen8_enable|disable_vblank functions
drm/i915: Wire up pipe CRC support for bdw
drm/i915: Wire up PCH interrupts for bdw
drm/i915: Wire up port A aux channel
drm/i915: Fix up the bdw pipe interrupt enable lists
drm/i915: Optimize pipe irq handling on bdw
drm/i915/bdw: Take render error interrupt out of the mask
drm/i915/bdw: Add BDW PCH check first
drm/i915: Use hsw_crt_get_config on BDW
drm/i915/bdw: Change dp aux timeout to 600us on DDIA
drm/i915/bdw: Enable trickle feed on Broadwell
drm/i915/bdw: WaSingleSubspanDispatchOnAALinesAndPoints
drm/i915/bdw: conservative SBE VUE cache mode
drm/i915/bdw: Limit SDE poly depth FIFO to 2
drm/i915/bdw: Sampler power bypass disable
ddrm/i915/bdw: Disable centroid pixel perf optimization
drm/i915/bdw: BWGTLB clock gate disable
drm/i915/bdw: Implement edp PSR workarounds
...
|
|
into drm-next
A few more patches for 3.13. The big one here is Hawaii support.
I wanted to get that out sooner, but was sick earlier this week. That
said, it's mostly self contained, so it shouldn't impact other asics.
The rest are just bug fixes and a merge fix.
* 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux: (23 commits)
Revert "drm/radeon/audio: don't set speaker allocation on DCE4+"
drm/radeon/audio: improve ACR calculation
drm/radeon/audio: correct ACR table
drm/radeon: fix mismerge of drm-next with 3.12
drm/radeon: add pci ids for hawaii
drm/radeon: fill in radeon_asic_init for hawaii
drm/radeon: modesetting updates for hawaii
drm/radeon: atombios.h updates for hawaii
drm/radeon: update cik_get_csb_buffer for hawaii
drm/radeon: add hawaii dpm support
drm/radeon/cik: add hawaii UVD support
drm/radeon: update firmware loading for hawaii
drm/radeon: update rb setup for hawaii
drm/radeon: add golden register settings for hawaii
drm/radeon: update cik_tiling_mode_table_init() for hawaii
drm/radeon: minor updates to cik.c for hawaii
drm/radeon: update cik_gpu_init() for hawaii
drm/radeon: add Hawaii chip family
drm/radeon: fix-up some float to fixed conversion thinkos
drm/radeon: use HDP_MEM_COHERENCY_FLUSH_CNTL for sdma as well
...
|
|
drm-next
prime support, inactive rework, render nodes
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
drm/msm/mdp4: page_flip cleanups/fixes
drm/msm: EBUSY status handling in msm_gem_fault()
drm/msm: rework inactive-work
drm/msm: add plane support
drm/msm: resync generated headers
drm/msm: support render nodes
drm/msm: prime support
|
|
This uses the proper div macro.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Fix CONFIG_ACPI=n build fail
CC drivers/gpu/drm/i915/intel_opregion.o
drivers/gpu/drm/i915/intel_opregion.c: In function ‘intel_opregion_setup’:
drivers/gpu/drm/i915/intel_opregion.c:879:2: error: ‘asle_work’ undeclared (first use in this function)
drivers/gpu/drm/i915/intel_opregion.c:879:2: note: each undeclared identifier is reported only once for each function it appears in
make[4]: *** [drivers/gpu/drm/i915/intel_opregion.o] Error 1
introduced in
commit 91a60f20712179e56b7a6c3d332a5f6f9a54aa11
Author: Jani Nikula <jani.nikula@intel.com>
Date: Thu Oct 31 18:55:48 2013 +0200
drm/i915: move opregion asle request handling to a work queue
Reported-by: Jim Davis <jim.epost@gmail.com>
Reference: http://lkml.kernel.org/r/CA+r1ZhjcFpr5KKVX0pLCOP8cAyZoiYO=UyqYMJtNSV-Kt_p7xQ@mail.gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This reverts commit 555b1b651acf44bf27ebbb04235d38a8fd2d58dc.
Let's try this again for 3.13. It's required for proper
interaction with alsa. Was disabled previously in 3.12
to be on the safe side since it caused problems on older
asics.
|
|
In order to have any realistic chance of calculating proper
ACR values, we need to be able to calculate both N and CTS,
not just CTS. We still aim for the ideal N as specified in
the HDMI spec though.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The values were taken from the HDMI spec, but they assumed
exact x/1.001 clocks. Since we round the clocks, we also need
to calculate different N and CTS values.
Note that the N for 25.2/1.001 MHz at 44.1 kHz audio is out of
spec. Hopefully this mode is rarely used and/or HDMI sinks
tolerate overly large values of N.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Audio is enabled by default now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fill in gpu details for hawaii.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Uses the same code as bonaire.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This updates atombios.h with the latest changes
required for hawaii.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set the PA_SC_RASTER_CONFIG[_1] registers for hawaii.
The rest is the same as the other asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This updates the CI dpm (dynamic power management)
support for hawaii.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Has same version of UVD as other CIK parts.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|