summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2005-07-27[PATCH] i4l: add Olitec ISDN PCI card in hisax gazel driverOlivier Blin
This patch adds support for the Olitec ISDN PCI card in the hisax gazel driver. The gazel driver supports this card, but wasn't aware of its PCI ids. Users used to modify the PCI ids of a supported card in include/linux/pci_ids.h and recompile their kernel to get this card running, as said in most Howtos. This patch makes the hisax gazel driver recognize the PCI ids of the Olitec ISDN PCI card. Signed-off-by: Olivier Blin <oblin@mandriva.com> Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] scsi_scan: check return code from scsi_sysfs_add_sdevAlan Stern
Adds a missing check for an error return code from scsi_sysfs_add_sdev. This resolves entry #4863 in the OSDL bugzilla. Although in that bug report the failure occurred because of a confusion over scanning vs. rescanning, in general add_sdev can fail for a number of reasons (the simplest being insufficient memory) and the caller should cope properly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] watchdog: add missing 0x in alim1535_wdt.cRolf Eike Beer
Usually the device IDs are given in hex. This one is a bit strange: it is without 0x in the first place and used with it some lines later. I suspect the first one to be the wrong. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] drivers/pnp/pnpbios/rsparser.c: fix compile error with PCI=nAdrian Bunk
drivers/pnp/pnpbios/rsparser.c: In function 'pnpbios_parse_allocated_irqresource': drivers/pnp/pnpbios/rsparser.c:67: error: too many arguments to function 'pcibios_penalize_isa_irq' Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] as-iosched tunable encoding fixJens Axboe
AS is doing internal msec<->jiffies conversions twice, so the sysfs tunables which represent time are coming out wrong. The switch from HZ=1000 exposed this. Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] Add missing tvaudio try_to_freeze()Nigel Cunningham
Tvaudio lacks a refrigerator call. This patch fixes that. Signed-off-by: Nigel Cunningham <ncunningham@suspend2.net> Cc: <video4linux-list@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] md: when resizing an array, we need to update resync_max_sectors as ↵NeilBrown
well as size Without this, and attempt to 'grow' an array will claim to have synced the extra part without actually having done anything. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] mips: fbdev Kcofnig fixYoichi Yuasa
arch/mips/Kconfig is defining CONFIG_FB as bool and drivers/video/Kconfig was changed a while ago to define it as tristate. Remove the MIPS definition. Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] I2C-MPC: Restore code removedKumar Gala
A previous patch to remove support for the OCP device model was way to generious and moved some of the platform device model code, oops. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] softdog build fixAndrew Morton
drivers/char/watchdog/softdog.c:94: too many arguments to function `emergency_restart' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] eurotechwdt build fixAndrew Morton
drivers/char/watchdog/eurotechwdt.c:165: too many arguments to function `emergency_restart' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-07-26Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-07-26Fix compiler warning in qla_iocb.cLinus Torvalds
Remove bogus initialization that was re-done (correctly) later.
2005-07-26[PATCH] acpi: Don't call acpi_sleep_prepare from acpi_power_offEric W. Biederman
Now that all of the code paths that call acpi_power_off have been modified to call either call kernel_power_off (which calls apci_sleep_prepare by way of acpi_shutdown) or to call acpi_sleep_prepare directly it is redundant to call acpi_sleep_prepare from acpi_power_off. So simplify the code and simply don't call acpi_sleep_prepare. In addition there is a little error handling done so if we can't register the acpi class we don't hook pm_power_off. I think I have done the right thing with the CONFIG_PM define but I'm not certain. Can this code even be compiled if CONFIG_PM is false? Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] acpi_power_off: Don't switch to the boot cpuEric W. Biederman
machine_power_off on i386 and x86_64 now switch to the boot cpu out of paranoia and because the MP Specification indicates it is a good idea on reboot, so for those architectures it is a noop. I can't see anything in the acpi spec that requires you to be on the boot cpu to power off the system, so this should not be an issue for ia64. In addition ia64 has the altix a massive multi-node system where switching to the boot cpu sounds insane as we may hot removed the boot cpu. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] pcwd.c: Call kernel_power_off not machine_power_offEric W. Biederman
The call appears to come from process context so kernel_power_off should be safe. And acpi_power_off won't necessarily work if you just call machine_power_off. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] 68328serial: sysrq should use emergency_rebootEric W. Biederman
The 68328serial.c driver has a weird local reimplementation of magic sysrq. The code is architecture specific enough that calling machine_restart() is probably ok. But there is no reason not to call emergency_restart() so do so. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] In hangcheck-timer.c call emergency_restart()Eric W. Biederman
If we've hung a clean reboot does not sound like a real option. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] Fix watchdog drivers to call emergency_reboot()Eric W. Biederman
If a watchdog driver has decided it is time to reboot the system we know something is wrong and we are in interrupt context so emergency_reboot() is what we want. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] Update sysrq-B to use emergency_restart()Eric W. Biederman
sysrq calls into the reboot path from an interrupt handler we can either push the code do into process context and call kernel_restart and get a clean reboot or we can simply reboot the machine, and increase our chances of actually rebooting. emergency_reboot() seems like the closest match to what we have previously done, and what we want. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] qla2xxx: Kconfig dependency fixAndrew Morton
*** Warning: "fc_remote_port_block" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "scsi_is_fc_rport" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remote_port_unblock" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remote_port_rolechg" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_release_transport" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remove_host" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_remote_port_add" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! *** Warning: "fc_attach_transport" [drivers/scsi/qla2xxx/qla2xxx.ko] undefined! Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26[PATCH] qla: remove anonymous unionAndrew Morton
Older gcc's dont support anonymous unions, so this driver gets hundreds of error. Fortunately the fix is easy... Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds
2005-07-26[PATCH] ARM: 2830/1: Fix Jornada 720 PCMCIA-supportMichael Gernoth
Patch from Michael Gernoth This patch lets the Jornada 720 PCMCIA-driver compile again. The resulting driver has been tested on a Jornada with a CF-card, which was mounted and accessed successfully. Signed-off-by: Michael Gernoth <michael@gernoth.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-25[ATM]: speedtch: Revert 86cf42e4e029b83110cf98692420239103363dbfDavid S. Miller
It was already fixed more sufficiently by Andrew Morton's change 843c944fb86e5e31ee7b319172e657ea22301322. Noted by Duncan Sands. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: Update driver version and reldate.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: add 5780 fiber supportMichael Chan
Add 5780S support by adding a new tg3_setup_fiber_mii_phy() function and a timer function for parallel link detection. 5780S uses standard MII registers for 1000BaseX and runs in GMII mode as opposed to TBI mode on older serdes chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: disallow jumbo TSO on 5780Michael Chan
Disallow jumbo TSO on 5780 due to hardware restrictions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: consolidate all DMA water mark settingsMichael Chan
Consolidate all DMA watermark settings for standard and jumbo frames on all chips in tg3_init_bufmgr_config() and add new settings for 5780. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: add variable buffer size for standard ringMichael Chan
Add a new rx_pkt_buf_sz to the tg3 structure to support variable buffer sizes on the standard ring. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: add 5780 basic jumbo frame supportMichael Chan
Add basic jumbo frames support for 5780. This chip supports jumbo frames on the standard receive ring without the jumbo ring. The TG3_FLAG_JUMBO_ENABLE is changed to TG3_FLAG_JUMBO_RING_ENABLE to indicate using the jumbo ring on 5704 and older chips. A new TG3_FLG2_JUMBO_CAPABLE flag is added to indicate jumbo frames support with or without the jumbo ring. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-25[TG3]: add 5780 basic supportMichael Chan
Add 5780 PCI IDs, chip IDs, and other basic support. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-24Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-07-24[SPARC]: Fix __KERNEL_SYSCALLS__ defining in envctrl.c and bbc_envctrl.cDavid S. Miller
It needs to happen before any header includes because nowadays some things implicitly include asm/unistd.h which ends up being before the __KERNEL_SYSCALLS__ define gets done. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-24[SPARC]: sbus/vfc_i2c: remove sleep_on() usageNishanth Aravamudan
Use wait-queue directly instead of the deprecated sleep_on() function. This required adding a local wait-queue. Also use new (added in separate patch to K-J) usecs to jiffies function to convert value. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-24[SPARC]: sbus/envctrl: replace schedule_timeout() with msleep_interruptible()Nishanth Aravamudan
Use msleep_interruptible() instead of schedule_timeout() to guarantee the task delays as expected. Change the units of poll_interval to msecs as it is only used in this delay. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-24[SPARC]: sbus/aurora: replace schedule_timeout() with msleep_interruptible()Nishanth Aravamudan
Use msleep_interruptible() instead of schedule_timeout() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org>
2005-07-24[SPARC]: Remvoe APM_RTC_IS_GMT from config.Adrian Bunk
I can't see any effect of this option outside the i386-specific APM code. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-24[W1]: Do not use NFLOG netlink number.David S. Miller
Use the reserved by never used NETLINK_SKIP value instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-23Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-07-23Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-07-23/home/lenb/linux-2.6 branch 'acpi-2.6.12'Luming Yu
2005-07-23ACPI: delete unnecessary EC console messagesLuming Yu
http://bugzilla.kernel.org/show_bug.cgi?id=4534 Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-22Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-07-22[PATCH] Serial: No need to check for priv != NULL in remove_oneRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-21[EQL]: Proper num_slaves decrementLoic Le Loarer
Signed-off-by: Loic Le Loarer <loic.le-loarer+lk@polytechnique.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-20[ATM]: zatm: mailbox converted to pci_alloc_consistent()Francois Romieu
mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-19[NET]: NETCONSOLE must depend on INETAdrian Bunk
NETCONSOLE=y and INET=n results in the following compile error: net/built-in.o: In function `netpoll_parse_options': : undefined reference to `in_aton' net/built-in.o: In function `netpoll_parse_options': : undefined reference to `in_aton' Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-19[ATM]: [speedtch] cure atm_printk() macro gcc-2.95 compile errorDuncan Sands
Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 09:49:04 +0000