summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2014-04-17drm/radeon: re-enable mclk dpm on R7 260X asicsAlex Deucher
If the new mc ucode is available. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-04-17drm/radeon: add support for newer mc ucode on CI (v2)Alex Deucher
Fixes mclk stability on certain asics. v2: print out mc firmware version used and size bug: https://bugs.freedesktop.org/show_bug.cgi?id=75992 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-04-17drm/radeon: add support for newer mc ucode on SI (v2)Alex Deucher
May fix stability issues with some newer cards. v2: print out mc firmware version used and size Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-04-17drm/radeon: apply more strict limits for PLL params v2Christian König
Letting post and refernce divider get to big is bad for signal stability. v2: increase the limit to 210 Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-17drm/radeon: update CI DPM powertune settingsAlex Deucher
As per internal recommendations. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-04-17drm/radeon: fix runpm handling on APUs (v4)Alex Deucher
Don't try and runtime suspend the APU in PX systems. We only want to power down the dGPU. v2: fix harder v3: fix stupid typo v4: consolidate runpm enablement to a single flag bugs: https://bugs.freedesktop.org/show_bug.cgi?id=75127 https://bugzilla.kernel.org/show_bug.cgi?id=72701 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-04-17drm/radeon: disable mclk dpm on R7 260XAlex Deucher
Setting higher mclks seems to cause stability issues on some R7 260X boards. Disable it for now for stability until we find a proper fix. bug: https://bugs.freedesktop.org/show_bug.cgi?id=75992 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-04-17raid5: fix a race of stripe count checkShaohua Li
I hit another BUG_ON with e240c1839d11152b0355442. In __get_priority_stripe(), stripe count equals to 0 initially. Between atomic_inc and BUG_ON, get_active_stripe() finds the stripe. So the stripe count isn't 1 any more. V2: keeps the BUG_ON suggested by Neil. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-04-17video: Kconfig: move drm and fb into separate menusTomi Valkeinen
At the moment the "Device Drivers / Graphics support" kernel config page looks rather messy, with DRM and fbdev driver selections on the same page, some on the top level Graphics support page, some under their respective subsystems. If I'm not mistaken, this is caused by the drivers depending on other things than DRM or FB, which causes Kconfig to arrange the options in not-so-neat manner. Both DRM and FB have a main menuconfig option for the whole DRM or FB subsystem. Optimally, this would be enough to arrange all DRM and FB options under the respective subsystem, but for whatever reason this doesn't work reliably. This patch adds an explicit submenu for DRM and FB, making it much clearer which options are related to FB, and which to DRM. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17fbdev: move fbdev core files to separate directoryTomi Valkeinen
Instead of having fbdev framework core files at the root fbdev directory, mixed with random fbdev device drivers, move the fbdev core files to a separate core directory. This makes it much clearer which of the files are actually part of the fbdev framework, and which are part of device drivers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17video: move fbdev to drivers/video/fbdevTomi Valkeinen
The drivers/video directory is a mess. It contains generic video related files, directories for backlight, console, linux logo, lots of fbdev device drivers, fbdev framework files. Make some order into the chaos by creating drivers/video/fbdev directory, and move all fbdev related files there. No functionality is changed, although I guess it is possible that some subtle Makefile build order related issue could be created by this patch. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Clark <robdclark@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-16drivers/base/dd.c incorrect pr_debug() parametersFrank Rowand
pr_debug() parameters are reverse order of format string Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "ARM VIC (Vectored Irq Controller) irqchip driver fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: vic: Properly chain the cascaded IRQs
2014-04-16Merge tag 'fbdev-fixes-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - fix build errors for bf54x-lq043fb and imxfb - fbcon fix for da8xx-fb - omapdss fixes for hdmi audio, irq handling and fclk calculation * tag 'fbdev-fixes-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: bf54x-lq043fb: fix build error OMAPDSS: Change struct reg_field to dispc_reg_field OMAPDSS: Take pixelclock unit change into account in hdmi_compute_acr() OMAPDSS: fix shared irq handlers video: imxfb: Select LCD_CLASS_DEVICE unconditionally OMAPDSS: fix rounding when calculating fclk rate video: da8xx-fb: Fix casting of info->pseudo_palette
2014-04-16Merge tag 'pinctrl-v3.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pincontrol fixes from Linus Walleij: "A first set of pin control fixes for the v3.15 series: - Fix a couple of barnsjukdomar on the Rockchip driver. - Remove an idiotic debug print I happened to leave behind in the Nomadik driver. - Fixup the Qualcomm MSM interrupt handling code for the TLMM v2. - Three patches renaming the Broadcom Capri driver to BCM28155. This has been falling between the chairs for some time due to some cross-tree synchronization misunderstandings, now I'm fed up with this and just rename it in this -rc1 phase" * tag 'pinctrl-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix typo in bindings documentation Update bcm_defconfig with new pinctrl CONFIG pinctrl: Rename Broadcom Capri pinctrl driver pinctrl: msm: Correct interrupt code for TLMM v2 pinctrl: nomadik: delete stray debug print pinctrl: rockchip: handle first half of rk3188-bank0 correctly pinctrl: rockchip: add return value to rockchip_set_mux pinctrl: rockchip: fix offset of mux registers for rk3188
2014-04-16serial: amba-pl011: fix regression, causing an Oops on rmmodGuennadi Liakhovetski
A recent commit ef2889f7ffee67f0aed49e854c72be63f1466759 "serial: pl011: Move uart_register_driver call to device probe" introduced a regression, causing the pl011 driver to Oops if more than 1 port have been probed. Fix the Oops by only calling uart_unregister_driver() once after the last port has been removed. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16tty: Fix help text of SYNCLINK_CSJean Delvare
Enabling SYNCLINK_CS as a module builds synclink_cs, not synclinkmp. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16tty: fix memleak in alloc_pidChen Tingjie
There is memleak in alloc_pid: ------------------------------ unreferenced object 0xd3453a80 (size 64): comm "adbd", pid 1730, jiffies 66363 (age 6586.950s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 40 c2 f6 d5 00 d3 25 c1 59 28 00 00 ....@.....%.Y(.. backtrace: [<c1a6f15c>] kmemleak_alloc+0x3c/0xa0 [<c1320546>] kmem_cache_alloc+0xc6/0x190 [<c125d51e>] alloc_pid+0x1e/0x400 [<c123d344>] copy_process.part.39+0xad4/0x1120 [<c123da59>] do_fork+0x99/0x330 [<c123dd58>] sys_fork+0x28/0x30 [<c1a89a08>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff the leak is due to unreleased pid->count, which execute in function: get_pid()(pid->count++) and put_pid()(pid->count--). The race condition as following: task[dumpsys] task[adbd] in disassociate_ctty() in tty_signal_session_leader() ----------------------- ------------------------- tty = get_current_tty(); // tty is not NULL ... spin_lock_irq(&current->sighand->siglock); put_pid(current->signal->tty_old_pgrp); current->signal->tty_old_pgrp = NULL; spin_unlock_irq(&current->sighand->siglock); spin_lock_irq(&p->sighand->siglock); ... p->signal->tty = NULL; ... spin_unlock_irq(&p->sighand->siglock); tty = get_current_tty(); // tty NULL, goto else branch by accident. if (tty) { ... put_pid(tty_session); put_pid(tty_pgrp); ... } else { print msg } in task[dumpsys], in disassociate_ctty(), tty is set NULL by task[adbd], tty_signal_session_leader(), then it goto else branch and lack of put_pid(), cause memleak. move spin_unlock(sighand->siglock) after get_current_tty() can avoid the race and fix the memleak. Signed-off-by: Zhang Jun <jun.zhang@intel.com> Signed-off-by: Chen Tingjie <tingjie.chen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16ttyprintk: Allow built as a moduleTakashi Iwai
The driver is well written to be used as a module, just the exit call is missing. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16ttyprintk: Fix wrong tty_unregister_driver() call in the error pathTakashi Iwai
ttyprintk driver calls tty_unregister_driver() wrongly in the error path of tty_register_driver(). Also, setting ttyprintk_driver to NULL is utterly superfluous, so let's get rid of it, too. Reported-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16serial: 8250, disable "too much work" messagesJiri Slaby
The 8250 driver now reports many of these: serial8250: too much work for irq4 These messages turned out to be common these days with a use of virtualization. I tried to increase the limit of processed characters in commit e7328ae1848966181a7ac47e8ae6cddbd2cf55f3 (serial: 8250, increase PASS_LIMIT) in 2011. It was raised from 256 to 512, but it is still not enough, apparently. So disable the warning unless somebody turns on DEBUG (or DYNAMIC_DEBUG _and_ the message). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Martin Pluskal <mpluskal@suse.com> Reported-by: Takashi Iwai <tiwai@suse.com> Tested-by: Takashi Iwai <tiwai@suse.de> References: https://bugzilla.novell.com/show_bug.cgi?id=868394 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16serial: omap: Fix missing pm_runtime_resume handling by simplifying codeTony Lindgren
The lack of pm_runtime_resume handling for the device state leads into device wake-up interrupts not working after a while for runtime PM. Also, serial-omap is confused about the use of device_may_wakeup. The checks for device_may_wakeup should only be done for suspend and resume, not for pm_runtime_suspend and pm_runtime_resume. The wake-up events for PM runtime should always be enabled. The lack of pm_runtime_resume handling leads into device wake-up interrupts not working after a while for runtime PM. Rather than try to patch over the issue of adding complex tests to the pm_runtime_resume, let's fix the issues properly: 1. Make serial_omap_enable_wakeup deal with all internal PM state handling so we don't need to test for up->wakeups_enabled elsewhere. Later on once omap3 boots in device tree only mode we can also remove the up->wakeups_enabled flag and rely on the wake-up interrupt enable/disable state alone. 2. Do the device_may_wakeup checks in suspend and resume only, for runtime PM the wake-up events need to be always enabled. 3. Finally just call serial_omap_enable_wakeup and make sure we call it also in pm_runtime_resume. 4. Note that we also have to use disable_irq_nosync as serial_omap_irq calls pm_runtime_get_sync. Fixes: 2a0b965cfb6e (serial: omap: Add support for optional wake-up) Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16serial_core: Fix pm imbalance on unbindGeert Uytterhoeven
When a serial port is closed, uart_close() takes care of shutting down the hardware, and powering it down. When a serial port is unbound while in use, uart_close() bypasses all of this, as this is supposed to be done through uart_hangup() (invoked via tty_vhangup() in uart_remove_one_port()). However, uart_hangup() does not set the hardware's power state, leaving it powered up. This may also lead to unbounded nesting counts in clock and power management, depending on their internal implementation. Make sure to power down the port in uart_hangup(), except when the port is used as a serial console. For serial consoles, this operation must be postponed until after the port becomes completely unused. This case is not fixed yet, as it depends on a (future) fix for the tty->count vs. port->count imbalance on failed uart_open(). After this, the module clock used by the sh-sci driver is disabled on unbind while the serial port is in use. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16serial: pl011: change Rx burst size to half of trigger levelGuennadi Liakhovetski
The amba-pl011.c driver sets DMA burst size equal to FIFO trigger level. If now exactly DMA burst size bytes are received, the DMAC will retrieve them all and no Rx timeout interrupt will be generated. To fix that set the burst size to half the FIFO trigger level. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16serial: timberdale: Depend on X86_32Jean Delvare
As far as I know the Timberdale chip was only used as a companion for Intel Atom E600 series processors. As such, its drivers are only useful on X86_32. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16serial: st-asc: Fix SysRq char handlingDaniel Thompson
This driver, like several others, uses the upper bits of the character to track both real and dummy state. Unfortunately it neglects to mask these bits properly when passing the character data around. This means neither break detection nor sysrq character handling work correctly. This patch adds the requires masking and has been tested to confirm that it correctly handles magic sysrq sequences on ST's B2020 board. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16Revert "serial: clps711x: Give a chance to perform useful tasks during wait ↵Alexander Shiyan
loop" This reverts commit 63e3ad3252695a2b8c01b6f6c225e4537af08b85, since this not works as expected and produce runtime error: BUG: sleeping function called from invalid context at drivers/tty/serial/clps711x.c:379 in_atomic(): 0, irqs_disabled(): 128, pid: 287, name: mount Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16serial_core: Fix conditional start_tx on ring buffer not emptySeth Bollinger
If the serial_core ring buffer empties just as the tty layer receives an XOFF, then start_tx will never be called when the tty layer receives an XON as the serial_core ring buffer is empty. This will possibly leave a few bytes trapped in the fifo for drivers that disable the transmitter when flow controlled. Signed-off-by: Seth Bollinger <sethb@digi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16serial: efm32: use $vendor,$device scheme for compatible stringUwe Kleine-König
Wolfram Sang pointed out that "efm32,$device" is non-standard. So use the common scheme and prefix device with "efm32-". The old compatible string is left in place until arch/arm/boot/dts/efm32* is fixed. Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16serial: omap: free the wakeup settings in removeSanjay Singh Rawat
Signed-off-by: Sanjay Singh Rawat <sanjay.rawat@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hostsK. Y. Srinivasan
Only ws2012r2 hosts support the ability to reconnect to the host on VMBUS. This functionality is needed by kexec in Linux. To use this functionality we need to negotiate version 3.0 of the VMBUS protocol. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16topology: Fix compilation warning when not in SMPVincent Stehlé
The topology_##name() macro does not use its argument when CONFIG_SMP is not set, as it ultimately calls the cpu_data() macro. So we avoid maintaining a possibly unused `cpu' variable, to avoid the following compilation warning: drivers/base/topology.c: In function ‘show_physical_package_id’: drivers/base/topology.c:103:118: warning: unused variable ‘cpu’ [-Wunused-variable] define_id_show_func(physical_package_id); drivers/base/topology.c: In function ‘show_core_id’: drivers/base/topology.c:106:106: warning: unused variable ‘cpu’ [-Wunused-variable] define_id_show_func(core_id); This can be seen with e.g. x86 defconfig and CONFIG_SMP not set. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> # 3.10.x Cc: <stable@vger.kernel.org> # 3.13.x Cc: <stable@vger.kernel.org> # 3.14.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16vme_tsi148: Utilize to_pci_dev() macroAaron Sierra
Save some characters by using to_pci_dev() instead of container_of(). Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16vme_tsi148: Fix PCI address mapping assumptionJoe Schultz
Previously, tsi148_master_set() assumed the address contained in its PCI bus resource represented the actual PCI bus address. This is a fine assumption on some platforms. However, on platforms that don't use a 1:1 (CPU:PCI) mapping this results in the tsi148 driver configuring an invalid master window translation. This patch updates the vme_tsi148 driver to first convert the address contained in the PCI bus resource into a PCI bus address before using it. [asierra: account for pcibios_resource_to_bus() prototype change] Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16vme_tsi148: Fix typo in tsi148_slave_get()Joe Schultz
This patch corrects a typo where "vme_base" was used instead of "*vme_base". The typo resulted in an incorrect value being returned to userspace (via vme_user). It also removes the following compile warning on some platforms: warning: cast from pointer to integer of different size [asierra: commit title/log rewording] Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16w1: avoid recursive device_addDavid Fries
__w1_attach_slave_device calls device_add which calls w1_bus_notify which calls the w1_bq27000 slave driver, which calls platform_device_add and device_add and deadlocks on getting &(&priv->bus_notifier)->rwsem as it is still held in the previous device_add. This avoids the problem by processing the family add/remove outside of the slave device_add call. Commit 47eba33a0997fc7362a introduced this deadlock and added a KOBJ_ADD, as the add was already reported in device_register two add events were being sent. This change suppresses the device_register add so that any slave device sysfs entries are setup before the add goes out. Belisko Marek reported this change fixed the deadlock he was seeing on ARM device tree, while testing on my x86-64 system never saw the deadlock. Reported-by: Belisko Marek <marek.belisko@gmail.com> Signed-off-by: David Fries <David@Fries.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16w1: fix netlink refcnt leak on error pathDavid Fries
If the message type is W1_MASTER_CMD or W1_SLAVE_CMD, then a reference is taken when searching for the slave or master device. If there isn't any following data m->len (mlen is a copy) is 0 and packing up the message for later execution is skipped leaving nothing to decrement the reference counts. Way back when, m->len was checked before the search that increments the reference count, but W1_LIST_MASTERS has no additional data, the check was moved in 9be62e0b2fadaf5ff causing this bug. This change reorders to put the check before the reference count is incremented avoiding the problem. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16uas: fix deadlocky memory allocationsOliver Neukum
There are also two allocations with GFP_KERNEL in the pre-/post_reset code paths. That is no good because that is a part of the SCSI error handler. Signed-off-by: Oliver Neukum <oliver@neukum.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16uas: fix error handling during scsi_scan()Oliver Neukum
intfdata is set only after scsi_scan(). uas_pre_reset() however needs intfdata to be valid and will follow the NULL pointer killing khubd. intfdata must be preemptively set before the host is registered and undone in the error case. Signed-off-by: Oliver Neukum <oliver@neukum.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16uas: fix GFP_NOIO under spinlockOliver Neukum
Quote Dan: The patch e36e64930cff: "uas: Use GFP_NOIO rather then GFP_ATOMIC where possible" from Nov 7, 2013, leads to the following static checker warning: drivers/usb/storage/uas.c:806 uas_eh_task_mgmt() error: scheduling with locks held: 'spin_lock:lock' Some other allocations under spinlock are not caught. The fix essentially reverts e36e64930cffd94e1c37fdb82f35989384aa946b Signed-off-by: Oliver Neukum <oliver@neukum.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16uwb: adds missing error handlingDaeseok Youn
There is checking NULL before dereferncing but it need to add "return". Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: cdc-acm: Remove Motorola/Telit H24 serial interfaces from ACM driverMichael Ulbricht
By specifying NO_UNION_NORMAL the ACM driver does only use the first two USB interfaces (modem data & control). The AT Port, Diagnostic and NMEA interfaces are left to the USB serial driver. Signed-off-by: Michael Ulbricht <michael.ulbricht@systec-electronic.com> Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: ohci-jz4740: FEAT_POWER is a port feature, not a hub featureLaurent Pinchart
Power control of hub ports target the CLEAR_FEATURE and SET_FEATURE requests to ports, not to the hub. Fix the hub control function to detect the request correctly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: ohci-jz4740: Fix uninitialized variable warningLaurent Pinchart
The ret variable is not initialized in all code paths of the ohci_jz4740_hub_control function. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: EHCI: tegra: set txfill_tuningStephen Warren
To avoid memory fetch underflows with larger USB transfers, Tegra SoCs need txfill_tuning's txfifothresh register field set to a non-default value. Add a custom reset override in order to set this up. These values are recommended practice for all Tegra chips. However, I've only noticed practical problems when not setting them this way on systems using Tegra124. Hence, CC: stable only for recent kernels which actually support Tegra124. Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16usb: ehci-platform: Return immediately from suspend if ehci_suspend failsVivek Gautam
Patch 'b8efdaf USB: EHCI: add check for wakeup/suspend race' adds a check for possible race between suspend and wakeup interrupt, and thereby it returns -EBUSY as error code if there's a wakeup interrupt. So the platform host controller should not proceed further with its suspend callback, rather should return immediately to avoid powering down the essential things, like phy. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16usb: ehci-exynos: Return immediately from suspend if ehci_suspend failsVivek Gautam
Patch 'b8efdaf USB: EHCI: add check for wakeup/suspend race' adds a check for possible race between suspend and wakeup interrupt, and thereby it returns -EBUSY as error code if there's a wakeup interrupt. So the platform host controller should not proceed further with its suspend callback, rather should return immediately to avoid powering down the essential things, like phy. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: fix crash during hotplug of PCI USB controller cardAlan Stern
The code in hcd-pci.c that matches up EHCI controllers with their companion UHCI or OHCI controllers assumes that the private drvdata fields don't get set too early. However, it turns out that this field gets set by usb_create_hcd(), before hcd-pci expects it, and this can result in a crash when two controllers are probed in parallel (as can happen when a new controller card is hotplugged). The companions_rwsem lock was supposed to prevent this sort of thing, but usb_create_hcd() is called outside the scope of the rwsem. A simple solution is to check that the root-hub pointer has been initialized as well as the drvdata field. This doesn't happen until usb_add_hcd() is called; that call and the check are both protected by the rwsem. This patch should be applied to stable kernels from 3.10 onward. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Stefani Seibold <stefani@seibold.net> Tested-by: Stefani Seibold <stefani@seibold.net> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: cdc-acm: fix double usb_autopm_put_interface() in acm_port_activate()Alexey Khoroshilov
If acm_submit_read_urbs() fails in acm_port_activate(), error handling code calls usb_autopm_put_interface() while it is already called before acm_submit_read_urbs(). The patch reorganizes error handling code to avoid double decrement of USB interface's PM-usage counter. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16usb: usb-common: fix typo for usb_state_stringPeter Chen
%s/addresssed/addressed Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 23:13:16 +0000