summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2012-09-26serial: set correct baud_base for EXSYS EX-41092 Dual 16950Flavio Leitner
Apparently the same card model has two IDs, so this patch complements the commit 39aced68d664291db3324d0fcf0985ab5626aac2 adding the missing one. Signed-off-by: Flavio Leitner <fbl@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26serial: omap: fix the reciever line error caseShubhrajyoti D
This patch does the following - In case of errors if there least one data character in the RX FIFO read it otherwise it may stall the receiver. This is recommended in the interrupt reset method in the table 23-246 of the omap4 TRM. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-268250: blacklist Winbond CIR portSean Young
The legacy serial driver will detect the Winbond CIR device as a serial port, since it looks exactly like a serial port unless you know what it is from the PNP ID. Here we track this port as a special PORT_8250_CIR type, preventing the legacy serial driver from probing it. Signed-off-by: Sean Young <sean@mess.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-268250_pnp: do pnp probe before legacy probeSean Young
We first probe the legacy serial ports and then check pnp. If there is a non-standard configuration then this might not work, also this change is needed so we can blacklist Winbond CIR based on PNP ID. For this to work the 8250_pnp driver must be merged into the 8250 module. Signed-off-by: Sean Young <sean@mess.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-25staging: dgrp: using vmalloc needs to include vmalloc.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-25staging: dgrp: fix potential call to strncpy with a negative numberBill Pemberton
In dgrp_receive() there is: desclen = ((plen - 12) > MAX_DESC_LEN) ? MAX_DESC_LEN : plen - 12; strncpy(nd->nd_ps_desc, b + 12, desclen); However, it's possible for plen to be <= 12 here so we'd be passing a negative number into the strncpy(). Fix this to not make the strncpy call and report an error if desclen is <= 0 Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21serial: omap: Remove unnecessary checks from suspend/resumeSourav Poddar
Drop the check for "up" being valid on suspend/resume callbacks. It should be valid always. Get rid of the "pdata" check also as serial_omap_get_context_loss_count() checks for it. Tested on omap4 panda and 3630 based Beagle board. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21serial: imx: remove null check of sport in suspend/resume functionRichard Zhao
platform_get_drvdata always retrun a valid value after probe succeed. It also fixed smatch warnings: drivers/tty/serial/imx.c:1376 serial_imx_suspend() warn: variable dereferenced before check 'sport' (see line 1372) drivers/tty/serial/imx.c:1392 serial_imx_resume() warn: variable dereferenced before check 'sport' (see line 1388) Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21serial: imx: set sport as drvdata, like it's used elsewhereRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-218250: fix autoconfig to work with serial consoleFlavio Leitner
The autoconfig prints messages while holding the port's spinlock and that causes a deadlock when using serial console. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21pty: Fix locking bug on error pathAlan Cox
We end up dropping the mutex twice on some errors. We don't want to do that. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21serial_core: Fix race in uart_handle_dcd_changeAlan Cox
If a serial driver is called post hangup with a second DCD event then we will attempt to get the ldisc of NULL. Check we have a tty before trying to do anything with it. This is still only safe within the uart layer if the caller holds the relevant uart locks. We could do with a version where the tty is passed for more general use. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21staging: dgrp: add dgrp to the buildBill Pemberton
Kconfig and Makefile changes to add dgrp to the build system. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21staging: Add dgrp driver for Digi Realport devicesBill Pemberton
This is based on dgrp-1.9 available from ftp://ftp1.digi.com/support/beta/linux/dgrp/dgrp-1.9.tgz Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18tty/serial: put (EXPERIMENTAL) marking back on N_GSM and SERIAL_IFX6X60Greg Kroah-Hartman
Alan says these are not production ready, and users should be told this, so put the "(EXPERIMENTAL)" marking back in the Kconfig entry string. Reported-by: Alan Cox <alan@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18tty/serial: remove CONFIG_EXPERIMENTAL dependenciesGreg Kroah-Hartman
As discussed at the kernel summit this year, CONFIG_EXPERIMENTAL means nothing, so let's get rid of it. Cc: Kees Cook <keescook@chromium.org> Cc: Alan Cox <alan@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17tty: serial: Samsung: Fix return valueSachin Kamat
Return the value returned by the failing function instead of -1 (which does not convey the right error information). Fixes the following smatch warning: drivers/tty/serial/samsung.c:1687 s3c24xx_serial_modinit() info: why not propagate 'ret' from uart_register_driver() instead of -1? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17tty: n_gsm: Fix incorrect debug displayAlan Cox
In the trace we print the wrong values for N(R) on an I frame. Correct the mask. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17tty: ipwireless: check ppp register workedAlan Cox
Otherwise we start trying to use a bogus channel - ungood. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17tty: serial: max3100: Fix error caseAlan Cox
We don't want to free a random address if the entry is wrong, cover this and WARN if it ever happens. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17tty: Fix hvc returnAlan Cox
HVC returns a size of -1 bytes for the write room in some cases. This is bogus and not handled by the tty layer at all. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-16Merge 3.6-rc6 into tty-nextGreg Kroah-Hartman
This pulls in the fixes in 3.6-rc6 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-16Merge tag 'mfd-for-linus-3.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull mfd fixes from Samuel Ortiz: "This is the remaining MFD fixes for 3.6, with 5 pending fixes: - A tps65217 build error fix. - A lcp_ich regression fix caused by the MFD driver failing to initialize the watchdog sub device due to ACPI conflicts. - 2 MAX77693 interrupt handling bug fixes. - An MFD core fix, adding an IRQ domain argument to the MFD device addition API in order to prevent silent and potentially harmful remapping behaviour changes for drivers supporting non-DT platforms." * tag 'mfd-for-linus-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: MAX77693: Fix NULL pointer error when initializing irqs mfd: MAX77693: Fix interrupt handling bug mfd: core: Push irqdomain mapping out into devices mfd: lpc_ich: Fix a 3.5 kernel regression for iTCO_wdt driver mfd: Move tps65217 regulator plat data handling to regulator
2012-09-16Merge tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull pwm fixes from Thierry Reding: "While this comes a bit later than I had wished, both patches are rather minor and touch only new drivers so I think these are still safe for merging." * tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm: pwm: pwm-tiehrpwm: Fix conflicting channel period setting pwm: pwm-tiecap: Disable APWM mode after configure
2012-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull scsi target fixes from Nicholas Bellinger: "Here is the current set of target-pending fixes headed for v3.6-final The main parts of this series include bug-fixes from Paolo Bonzini to address an use-after-free bug in pSCSI sense exception handling, along with addressing some long-standing bugs wrt the handling of zero- length SCSI CDB payloads also specific to pSCSI pass-through device backends." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: go through normal processing for zero-length REQUEST_SENSE target: support zero allocation length in REQUEST SENSE target: support zero-size allocation lengths in transport_kmap_data_sg target: fail REPORT LUNS with less than 16 bytes of payload target: report too-small parameter lists everywhere target: go through normal processing for zero-length PSCSI commands target: fix use-after-free with PSCSI sense data target: simplify code around transport_get_sense_data target: move transport_get_sense_data target: Check idr_get_new return value in iscsi_login_zero_tsih_s1 target: Fix ->data_length re-assignment bug with SCSI overflow
2012-09-16Merge tag 'pm-for-3.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael J. Wysocki: "Three ACPI device power management fixes related to checking and setting device power states." * tag 'pm-for-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Use KERN_DEBUG when no power resources are found ACPI / PM: Fix resource_lock dead lock in acpi_power_on_device ACPI / PM: Infer parent power state from child if unknown, v2
2012-09-16mfd: MAX77693: Fix NULL pointer error when initializing irqsChanwoo Choi
This patch initialize register map of MUIC device because mfd driver of Maxim MAX77693 use regmap-muic instance of MUIC device when irqs of Maxim MAX77693 is initialized before call max77693-muic probe() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-16mfd: MAX77693: Fix interrupt handling bugChanwoo Choi
This patch fix bug related to interrupt handling for MAX77693 devices. - Unmask interrupt masking bit for charger/flash/muic to revolve that interrupt isn't happened when external connector is attached. - Fix wrong regmap instance when muic interrupt is happened. This patch were discussed and confirm discussion about this patch on below url: http://lkml.org/lkml/2012/7/16/118 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-15mfd: core: Push irqdomain mapping out into devicesMark Brown
Currently the MFD core supports remapping MFD cell interrupts using an irqdomain but only if the MFD is being instantiated using device tree and only if the device tree bindings use the pattern of registering IPs in the device tree with compatible properties. This will be actively harmful for drivers which support non-DT platforms and use this pattern for their DT bindings as it will mean that the core will silently change remapping behaviour and it is also limiting for drivers which don't do DT with this particular pattern. There is also a potential fragility if there are interrupts not associated with MFD cells and all the cells are omitted from the device tree for some reason. Instead change the code to take an IRQ domain as an optional argument, allowing drivers to take the decision about the parent domain for their interrupts. The one current user of this feature is ab8500-core, it has the domain lookup pushed out into the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver updates from Matthew Garrett: "A few small updates for 3.6 - a trivial regression fix and a couple of conformance updates for the gmux driver, plus some tiny fixes for asus-wmi, eeepc-laptop and thinkpad_acpi." * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: thinkpad_acpi: buffer overflow in fan_get_status() eeepc-laptop: fix device reference count leakage in eeepc_rfkill_hotplug() platform/x86: fix asus_laptop.wled_type description asus-laptop: HRWS/HWRS typo drivers-platform-x86: remove useless #ifdef CONFIG_ACPI_VIDEO apple-gmux: Fix port address calculation in gmux_pio_write32() apple-gmux: Fix index read functions apple-gmux: Obtain version info from indexed gmux
2012-09-14Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds
git://git.pengutronix.de/git/wsa/linux Pull i2c embedded fixes from Wolfram Sang: "The last bunch of (typical) i2c-embedded driver fixes for 3.6. Also update the MAINTAINERS file to point to my tree since people keep asking where to find their patches." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: algo: pca: Fix mode selection for PCA9665 MAINTAINERS: fix tree for current i2c-embedded development i2c: mxs: correctly setup speed for non devicetree i2c: pnx: Fix read transactions of >= 2 bytes i2c: pnx: Fix bit definitions
2012-09-14Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix word size register read and write operations in ina2xx driver, and initialize uninitialized structure elements in twl4030-madc-hwmon driver." * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ina2xx) Fix word size register read and write operations hwmon: (twl4030-madc-hwmon) Initialize uninitialized structure elements
2012-09-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "I realise this a bit bigger than I would want at this point. Exynos is a large chunk, I got them to half what they wanted already, and hey its ARM based, so not going to hurt many people. Radeon has only two fixes, but the PLL fixes were a bit bigger, but required for a lot of scenarios, the fence fix is really urgent. vmwgfx: I've pulled in a dumb ioctl support patch that I was going to shove in later and cc stable, but we need it asap, its mainly to stop mesa growing a really ugly dependency in userspace to run stuff on vmware, and if I don't stick it in the kernel now, everyone will have to ship ugly userspace libs to workaround it. nouveau: single urgent fix found in F18 testing, causes X to not start properly when f18 plymouth is used i915: smattering of fixes and debug quieting gma500: single regression fix So as I said a bit large, but its fairly well scattered and its all stuff I'll be shipping in F18's 3.6 kernel." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits) drm/nouveau: fix booting with plymouth + dumb support drm/radeon: make 64bit fences more robust v3 drm/radeon: rework pll selection (v3) drm: Drop the NV12M and YUV420M formats drm/exynos: remove DRM_FORMAT_NV12M from plane module drm/exynos: fix double call of drm_prime_(init/destroy)_file_private drm/exynos: add dummy support for dmabuf-mmap drm/exynos: Add missing braces around sizeof in exynos_mixer.c drm/exynos: Add missing braces around sizeof in exynos_hdmi.c drm/exynos: Make g2d_pm_ops static drm/exynos: Add dependency for G2D in Kconfig drm/exynos: fixed page align bug. drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/exynos: Use devm_* functions in exynos_drm_g2d.c file drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file drm/exynos: Remove redundant check in exynos_drm_fimd.c file drm/exynos: Remove redundant check in exynos_hdmi.c file vmwgfx: add dumb ioctl support gma500: Fix regression on Oaktrail devices ...
2012-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Use after free and new device IDs in bluetooth from Andre Guedes, Yevgeniy Melnichuk, Gustavo Padovan, and Henrik Rydberg. 2) Fix crashes with short packet lengths and VLAN in pktgen, from Nishank Trivedi. 3) mISDN calls flush_work_sync() with locks held, fix from Karsten Keil. 4) Packet scheduler gred parameters are reported to userspace improperly scaled, and WRED idling is not performed correctly. All from David Ward. 5) Fix TCP socket refcount problem in ipv6, from Julian Anastasov. 6) ibmveth device has RX queue alignment requirements which are not being explicitly met resulting in sporadic failures, fix from Santiago Leon. 7) Netfilter needs to take care when interpreting sockets attached to socket buffers, they could be time-wait minisockets. Fix from Eric Dumazet. 8) sock_edemux() has the same issue as netfilter did in #7 above, fix from Eric Dumazet. 9) Avoid infinite loops in CBQ scheduler with some configurations, from Eric Dumazet. 10) Deal with "Reflection scan: an Off-Path Attack on TCP", from Jozsef Kadlecsik. 11) SCTP overcharges socket for TX packets, fix from Thomas Graf. 12) CODEL packet scheduler should not reset it's state every time it builds a new flow, fix from Eric Dumazet. 13) Fix memory leak in nl80211, from Wei Yongjun. 14) NETROM doesn't check skb_copy_datagram_iovec() return values, from Alan Cox. 15) l2tp ethernet was using sizeof(ETH_HLEN) instead of plain ETH_HLEN, oops. From Eric Dumazet. 16) Fix selection of ath9k chips on which PA linearization and AM2PM predistoration are used, from Felix Fietkau. 17) Flow steering settings in mlx4 driver need to be validated properly, from Hadar Hen Zion. 18) bnx2x doesn't show the correct link duplex setting, from Yaniv Rosner. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) pktgen: fix crash with vlan and packet size less than 46 bnx2x: Add missing afex code bnx2x: fix registers dumped bnx2x: correct advertisement of pause capabilities bnx2x: display the correct duplex value bnx2x: prevent timeouts when using PFC bnx2x: fix stats copying logic bnx2x: Avoid sending multiple statistics queries net: qmi_wwan: call subdriver with control intf only net_sched: gred: actually perform idling in WRED mode net_sched: gred: fix qave reporting via netlink net_sched: gred: eliminate redundant DP prio comparisons net_sched: gred: correct comment about qavg calculation in RIO mode mISDN: Fix wrong usage of flush_work_sync while holding locks netfilter: log: Fix log-level processing net-sched: sch_cbq: avoid infinite loop net: qmi_wwan: fix Gobi device probing for un2430 net: fix net/core/sock.c build error ixp4xx_hss: fix build failure due to missing linux/module.h inclusion caif: move the dereference below the NULL test ...
2012-09-14Merge tag 'usb-3.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here are a number of USB patches, a bit more than I normally like this late in the -rc series, but given people's vacations (myself included), and the kernel summit, it seems to have happened this way. All are tiny, but they add up. A number of gadget and xhci fixes, and a few new device ids. All have been tested in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low usb: chipidea: cleanup dma_pool if udc_start() fails usb: chipidea: udc: fix error path in udc_start() usb: chipidea: udc: add pullup fuction, needed by the uvc gadget usb: chipidea: udc: fix setup of endpoint maxpacket size USB: option: replace ZTE K5006-Z entry with vendor class rule EHCI: Update qTD next pointer in QH overlay region during unlink USB: cdc-wdm: fix wdm_find_device* return value USB: ftdi_sio: do not claim CDC ACM function usb: dwc3: gadget: fix pending isoc handling usb: renesas_usbhs: fixup DMA transport data alignment usb: gadget: at91udc: Don't check for ep->ep.desc usb: gadget: at91udc: don't overwrite driver data usb: dwc3: core: fix incorrect usage of resource pointer usb: musb: musbhsdma: fix IRQ check usb: musb: tusb6010: fix error path in tusb_probe() usb: musb: host: fix for musb_start_urb Oops usb: gadget: dummy_hcd: add support for USB_DT_BOS on rh usb: gadget: dummy_hcd: fixup error probe path usb: gadget: s3c-hsotg.c: fix error return code ...
2012-09-14Merge tag 'tty-3.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY fixes from Greg Kroah-Hartman: "Here are 2 tiny patches for a serial driver to resolve issues that people have reported with the 3.6-rc tree. Both of these have been in the linux-next tree for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: imx: don't reinit clock in imx_setup_ufcr() tty: serial: imx: console write routing is unsafe on SMP
2012-09-14Merge tag 'staging-3.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fixes from Greg Kroah-Hartman: "Here are a few staging tree fixes for problems that have been reported. Nothing major, just a number of tiny driver fixes. All of these have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: drm/omap: add more new timings fields drm/omap: update for interlaced staging: r8712u: fix bug in r8712_recv_indicatepkt() staging: zcache: fix cleancache race condition with shrinker Staging: Android alarm: IOCTL command encoding fix staging: vt6656: [BUG] - Failed connection, incorrect endian. staging: ozwpan: fix memcmp() test in oz_set_active_pd() staging: wlan-ng: Fix problem with wrong arguments staging: comedi: das08: Correct AO output for das08jr-16-ao staging: comedi: das08: Correct AI encoding for das08jr-16-ao staging: comedi: das08: Fix PCI ref count staging: comedi: amplc_pci230: Fix PCI ref count staging: comedi: amplc_pc263: Fix PCI ref count staging: comedi: amplc_pc236: Fix PCI ref count staging: comedi: amplc_dio200: Fix PCI ref count staging: comedi: amplc_pci224: Fix PCI ref count drivers/iio/adc/at91_adc.c: adjust inconsistent IS_ERR and PTR_ERR staging iio: fix potential memory leak in lis3l02dq_ring.c staging:iio: prevent divide by zero bugs
2012-09-14ACPI / PM: Use KERN_DEBUG when no power resources are foundAaron Lu
commit a606dac368eed5696fb38e16b1394f1d049c09e9 adds support to link devices which have _PRx, if a device does not have _PRx, a warning message will be printed. This commit is for ZPODD on Intel ZPODD capable platforms, on other platforms, it has no problem if there is no power resource for this device, so a warning here is not appropriate, change it to debug. Reported-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-14i2c: algo: pca: Fix mode selection for PCA9665Thomas Kavanagh
The code currently always selects turbo mode for PCA9665, no matter which clock frequency is configured. This is because it compares the clock frequency against constants reflecting (boundary / 100). Compare against real boundary frequencies to fix the problem. Signed-off-by: Thomas Kavanagh <tkavanagh@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-14drm/nouveau: fix booting with plymouth + dumb supportDave Airlie
We noticed a plymouth bug on Fedora 18, and I then noticed this stupid thinko, fixing it fixed the problem with plymouth. Cc: stable@vger.kernel.org Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-14ACPI / PM: Fix resource_lock dead lock in acpi_power_on_deviceLin Ming
Commit 0090def("ACPI: Add interface to register/unregister device to/from power resources") used resource_lock to protect the devices list that relies on power resource. It caused a mutex dead lock, as below acpi_power_on ---> lock resource_lock __acpi_power_on acpi_power_on_device acpi_power_get_inferred_state acpi_power_get_list_state ---> lock resource_lock This patch adds a new mutex "devices_lock" to protect the devices list and calls acpi_power_on_device in acpi_power_on, instead of __acpi_power_on, after the resource_lock is released. [rjw: Changed data type of a boolean variable to bool.] Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-14ACPI / PM: Infer parent power state from child if unknown, v2Rafael J. Wysocki
It turns out that there are ACPI BIOSes defining device objects with _PSx and without either _PSC or _PRx. For devices corresponding to those ACPI objetcs __acpi_bus_get_power() returns ACPI_STATE_UNKNOWN and their initial power states are regarded as unknown as a result. If such a device is a parent of another power-manageable device, the child cannot be put into a low-power state through ACPI, because __acpi_bus_set_power() refuses to change power states of devices whose parents' power states are unknown. To work around this problem, observe that the ACPI power state of a device cannot be higher-power (lower-number) than the power state of its parent. Thus, if the device's _PSC method or the configuration of its power resources indicates that the device is in D0, the device's parent has to be in D0 as well. Consequently, if the parent's power state is unknown when we've just learned that its child's power state is D0, we can safely set the parent's power.state field to ACPI_STATE_D0. Tested-by: Aaron Lu <aaron.lu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-13thinkpad_acpi: buffer overflow in fan_get_status()Dan Carpenter
The acpi_evalf() function modifies four bytes of data but in fan_get_status() we pass a pointer to u8. I have modified the function to use type checking now. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13eeepc-laptop: fix device reference count leakage in eeepc_rfkill_hotplug()Jiang Liu
Fix a device reference count leakage issue in function eeepc_rfkill_hotplug(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13platform/x86: fix asus_laptop.wled_type descriptionMaxim Nikulin
MODULE_PARM_DESC for wlan_status is further in the same file Signed-off-by: Maxim A. Nikulin <M.A.Nikulin@gmail.com> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13asus-laptop: HRWS/HWRS typoCorentin Chary
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=24222 Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13drivers-platform-x86: remove useless #ifdef CONFIG_ACPI_VIDEOCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13apple-gmux: Fix port address calculation in gmux_pio_write32()Seth Forshee
This function fails to add the start address of the gmux I/O range to the requested port address and thus writes to the wrong location. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13apple-gmux: Fix index read functionsBernhard Froemel
Study of Apple's binary driver revealed that the GMUX_READ_PORT should be written between calls to gmux_index_wait_ready and gmux_index_wait_complete (i.e., the new index protocol must be followed). If this is not done correctly, the indexed gmux device only partially accepts writes which lead to problems concerning GPU switching. Special thanks to Seth Forshee who helped greatly with identifying unnecessary changes. Signed-off-by: Bernhard Froemel <froemel@vmars.tuwien.ac.at> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13apple-gmux: Obtain version info from indexed gmuxBernhard Froemel
This patch extracts and displays version information from the indexed gmux device as it is also done for the classic gmux device. Signed-off-by: Bernhard Froemel <froemel@vmars.tuwien.ac.at> Signed-off-by: Matthew Garrett <mjg@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-14 17:41:48 +0000