summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-09-15stmmac: remove the STBus bridge setting from the GMAC code (v3)Giuseppe CAVALLARO
This patch removes a piece of code (actually commented) only useful for some ST platforms in the past. This kind of setting now can be done by using the platform callbacks provided in linux/stmmac.h (see the stmmac.txt for further details). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Driver Version changed to 3.0.2.1Rasesh Mody
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: SKB PCI UNMAP FixRasesh Mody
Change details: - Found a leak in sk_buff unmapping of PCI dma addresses where boundary conditions are not properly handled in freeing all Tx buffers. Freeing of all Tx buffers is done considering sk_buffs data and fragments can be mapped at the boundary. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: TX Queue Depth FixRasesh Mody
sk_buff unmap_array grows greater than 65536 (x2) with Tx ring of 65536. Reducing TXQ depth and safe(max) acking of Tx events to 32768 (same as Rx). Add defines for TX and RX queue depths. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: MBOX IRQ Flag Check after LockingRasesh Mody
Change details: - Check the BNAD_RF_MBOX_IRQ_DISABLED flag after acquiring the bna_lock, since checking the flag and executing bna_mbox_handler needs to be atomic. If not, it opens up window where flag is reset when it was checked, but got set while spinning on the lock by the other thread which is actually holding the lock Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Async Mode Tx Rx Init FixRasesh Mody
Change details: - Async mode of Tx/Rx queue initialization in BNAD from a task queue context runs into non-unique taskq allocation issues. Get rid of Tx/Rx initialization from task q context - In the attach function, wait for IOC enable, then do Tx/Rx queue initialization. Default BNA attributes are used when IOC enable from attach fails and values are set to: 1 TxQ, 1 RxQ, 1 Unicast MAC, 1 RIT entry Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Ethtool Enhancements and FixRasesh Mody
Change details: - Add tx_skb counters and NAPI debug counters to ethtool stats. - Add rlb stats strings to bnad_net_stats_strings{} array. rlb_stats field was added to struct bfi_enet_stats {} but the corresponding name structure array for ethtool was not initialized with right strings, even though the actual name structure array got expanded. This caused a NULL pointer violation and a crash when doing ehtool -S <if_name>. - Modify dim timer stop logic to make it dependent on cfg and run flags - While setting the ring parameter restore the rx, vlan configuration and set rx mode - Indentation fix Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Initialization and Locking FixRasesh Mody
Change details: - Initialize rx_id to 0 for bnad_cleanup_rx - Return -ENOMEM in case if bna_rx_create fails - Count the Rx buffer allocation failures in bnad_alloc_n_post_rxbufs() - Remove unnecessary initialization of using_dac to false in bnad_pci_probe - Release lock if error while doing bna_num_txq_set in bnad_pci_probe Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Formatting and Code CleanupRasesh Mody
Change details: - Print log messages when running with reduced number of MSI-X vectors and when defaulting to INTx mode. - Remove BUG_ONs and header file inclusion that are not needed - Comments addition/cleanup - Unused code cleanup - Add New Line to Print msg in bfa_sm_fault - Formatting fix Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: TX Path and RX Path ChangesRasesh Mody
Change details: - Add bnad_pci_unmap_skb() API to unmap skb from transmit path and update the unmap index. Add more checks for illegal skbs in transmit path. Add tx_skb counters for dropped skbs. - The unmap_cons index used in bnad_free_txbufs() is incorrectly declared as u16. It quickly wraps around and accesses null sk_buff ptr. So using u32 to handle unmap_array. - Disable and enable interrupts from the same polling context to prevent reordering in Rx path. - Add Rx NAPI debug counters. - Make NAPI budget check more generic. - Modify dim timer stop logic to make it dependent on cfg and run flags - Handle reduced MSI-X vectors case in bnad_enable_msix. - Check for single frame TSO skbs and send them out as non-TSO. - Put memory barrier after bna_txq_prod_indx_doorbell(). Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Interrupt Polling and NAPI Init ChangesRasesh Mody
Change details: - Remove unnecessary ccb check from bnad_poll_cq - Add bnad pointer to rx_ctrl structure, so that bnad can be accessed directly from rx_ctrl in the NAPI poll routines, even if ccb is NULL - Validate ccb before referencing to it in bnad_msix_rx and bnad_napi_poll_rx - Fix the order of NAPI init / uninit in Tx / Rx setup / teardown path: a. Kill bnad tx free tasklet ahead of call to bna_tx_destroy() b. Call NAPI disable only after call to Rx free_irq(). This makes sure Rx interrupt does not schedule a poll when NAPI is already disabled - NAPI poll runs before the h/w has completed configuration. This causes a crash. Delay enabling NAPI till after bna_rx_enable(). Split NAPI initialization into 2 steps, bnad_napi_init() & bnad_napi_enable(). Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: PCI Probe FixRasesh Mody
Change details: - Return error as -EIO if bnad_res_alloc fails - Release the configuration lock before registering with net_device layer. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15bna: Naming Change and Minor Macro FixRasesh Mody
Naming changes: rename devid, BNAD_MAX_TXS, BNAD_MAX_RXS, BNAD_MAX_RXPS_PER_RX to device, BNAD_MAX_TX, BNAD_MAX_RX, BNAD_MAX_RXP_PER_RX respectively and change all the references. Macro Fix: Add ioc_isr_mod_set check to bfa_nw_ioc_mbox_regisr macro Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15r8169: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15qlge: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15qlcnic: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15qla3xxx: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15qeth: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ursula Braun <ursula.braun@de.ibm.com> Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com> Cc: linux390@de.ibm.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15pasemi: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Olof Johansson <olof@lixom.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15ns83820: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15niu: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15netxen: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15mv643xx: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15macvtap: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15ksz884x: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15jme: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15ibmveth: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Santiago Leon <santil@linux.vnet.ibm.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29bnx2x: Fix build errorDmitry Kravkov
On Mon, 2011-08-29 at 13:28 -0700, Randy Dunlap wrote: > (on i386 or x86_64) > > drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:10148: error: 'bnx2x_fcoe_get_wwn' undeclared here (not in a function) This should sync #define structures between definition and declaration Acked-by: Randy Dunlap <rdunlap@xenotime.net> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29net: Fix duplicate CONFIG_SLIP entry in driver/net/MakefileDavid S. Miller
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29qlcnic: add beacon test support.Sucheta Chakraborty
Beacon test flashes both port LEDs instead of just 1 LED of a port. Updated driver version to 5.0.23. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29qlcnic: fix cdrp race conditionSritej Velaga
Reading CRB registers(if reqd) before releasing the api lock. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29qlcnic: Add FLT entry for CO cards FW image regionSritej Velaga
The FLT entry for FW image region has changed for C0 cards. Updated the driver to look at the right region in the FLT. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29qlcnic: Change debug messages in loopback pathManish chopra
Added more debug messages while loopback test in progress Signed-off-by: Manish chopra <Manish.Chopra@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29qlcnic: detect fan failureSony Chacko
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2011-08-29net: fix Makefile typos & build errorsRandy Dunlap
Fix many (randconfig) PPP build errors by fixing typos in drivers/net/Makefile. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2011-08-29ixgbe: clear RNBC only for 82598Emil Tantilov
RNBC (0x03FC0) is only for 82598 and has different meaning on newer HW. Make sure to only clear it for 82598. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-29ixgbe: add check for supported modesEmil Tantilov
When setting advertised speed/duplex with ethtool. Also cleaned up the comment since we also support 100/F. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-29ixgbe: fix ixgbe_fc_autoneg_fiber bugDon Skidmore
A logic error in ixgbe_fc_autoneg_fiber() that treated a masked u32 as a boolean would make it so we would never fall hit a error check case. So now I force the u32 to a boolean value with '!!'. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-29ixgbe: cleanup feature flags in ixgbe_probeDon Skidmore
I'm removing NETIF_F_GRO from being initialed in the feature flags during ixgbe_probe() bases on a comment from Michal Miroslaw <mirq-linux@rere.qmqm.pl> that it is always set by network code now. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-29ixgbe: PFC not cleared on X540 devicesJohn Fastabend
X540 devices do not clear PFC before sets. This results in the device possibly responding to PFC frames that the user has disabled. Although it would also be wrong for the peer to be transmitting these frames. Now we clear the register before set. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-29ixgbe: consolidate, setup for multiple traffic classesJohn Fastabend
This consolidates setup code for multiple traffic classes in the setup_tc routine. Prep work to allow IEEE DCBX to optimize for number of traffic classes. Also simplifies code paths. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-29ixgbe: remove unneeded fdir pb alloc caseJohn Fastabend
The packet buffer is correctly allocated by generic pb allocation path in ixgbe_configure() there is no need to do the allocation here as well. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2011-08-29ixgbe: fixup remaining call sites for arbitrary TCsJohn Fastabend
One existing call sites still expect either 4 or 8 traffic classes to be specified. This fixes this allowing arbitrary values up to 8 to work as expected. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-29ixgbe: Always tag VLAN tagged packetsAlexander Duyck
This change is meant to fix the patch: ixgbe: Cleanup FCOE and VLAN handling in xmit_frame_ring And can be rolled into it if needed. What this fixes is that VLAN tagged packets were not being tagged if they were prio 7 which matches up with TC_PRIO_CONTROL. In order to fix it I am just setting things up so that we always tag VLAN tagged packets. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-29ixgbe: Add support for setting CC bit when SR-IOV is enabledAlexander Duyck
This change makes it so that the CC bit in the descriptor is set when SR-IOV is enabled. This is needed in order to support offloading functionality when passing traffic over the internal TX switch. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-28caif: Remove OOM messages, use kzallocJoe Perches
Remove per site OOM messages because they duplicate the generic mm subsystem OOM message. Use kzalloc instead of kmalloc/memset when next to the OOM message removals. Reduces object size (allyesconfig ~2%) $ size -t drivers/net/caif/built-in.o.old net/caif/built-in.o.old text data bss dec hex filename 32297 700 8224 41221 a105 drivers/net/caif/built-in.o.old 72159 1317 20552 94028 16f4c net/caif/built-in.o.old 104456 2017 28776 135249 21051 (TOTALS) $ size -t drivers/net/caif/built-in.o.new net/caif/built-in.o.new text data bss dec hex filename 31975 700 8184 40859 9f9b drivers/net/caif/built-in.o.new 70748 1317 20152 92217 16839 net/caif/built-in.o.new 102723 2017 28336 133076 207d4 (TOTALS) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-28benet: remove bogus "unlikely" on vlan checkJiri Pirko
Use of unlikely in this place is wrong. Remove it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-28cnic: Add timeout for ramrod replies.Michael Chan
If the bnx2x device has encountered parity errors, the chip will not DMA any replies. Using wait_event_timeout() will allow us to make forward progress and let bnx2x reset the chip. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-31 05:20:01 +0000