summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2010-08-24mlx4_en: Fix build warning in mlx4_en_create_rx_ring.David S. Miller
drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_create_rx_ring’: drivers/net/mlx4/en_rx.c:305: warning: label ‘err_map’ defined but not used Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: updated driver versionYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Moving to work with GROYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: UDP RSS supportYevgeny Petrilin
Adding capability for RSS for UDP traffic, hashing is done based on IP addresses and UDP port number. The support depends on HW/FW capabilities. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: reconfiguring mac address.Yevgeny Petrilin
When Mac address is removed from one port of the CX2 device, the other device should reconfigure its Mac. This fixes an issue with failover, when both ports have the same Mac address, and one of the ports, is closed, the second one stops receiving traffic. (bugzilla #1965 at bugs.openfabrics.org) Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: get/set ringsize uses actual ring sizeYevgeny Petrilin
In case that the rings were not fully filled, the report in Ethtool should be according to the actual size that was filled. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixing report in Ethtool get_settingsYevgeny Petrilin
The report now based on query from FW, giving the correct tranciever type and link speed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Added self diagnostics test implementationYevgeny Petrilin
The selftest includes 5 features: 1. Interrupt test: Executing commands and receiving command completion on all our interrupt vectors. 2. Link test: Verifying we are connected to valid link partner. 3. Speed test: Check that we negotiated link speed correctly. 4. Registers test: Activate HW health check command. 5. Loopback test: Send a packet on loopback interface and catch it on RX side. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Validate port up prior to transmittingYevgeny Petrilin
We might try to use resources which were not activated. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Reporting link state with KERN_INFOYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixed MAX_TX_RINGS definitionYevgeny Petrilin
Defined as sum of default number of TX rings and number of rings used for priority flow control mode. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: performing CLOSE_PORT at the end of tear-down processYevgeny Petrilin
All port's resources should be closed before we give the CLOSE_PORT command to the firmware. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Setting dev->perm_addr fieldYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Setting actual RX ring sizeYevgeny Petrilin
When configuring HW resources, the RX ring size that is passed should be the actual size that depends on number of buffers that we succeeded to allocate. The mask for ring size should also be configured accordingly Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixed incorrect unmapping on RX flow.Yevgeny Petrilin
When allocating new fragments to replace the ones that would be passed to the stack, The fragments that should be replaced, are the ones that were already used. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24bcm63xx_enet: use netdev statsEric Dumazet
Use integrated net_device stats instead of a private one Get rid of bcm_enet_get_stats() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24ethoc: get rid of ethoc_stats()Eric Dumazet
drivers can avoid implementing ndo_get_stats method if using netdevice stats structure. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24be2net: get rid of be_get_stats()Eric Dumazet
drivers can avoid implementing ndo_get_stats method if using netdevice stats structure. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23cxgb4: update PCI idsDimitris Michailidis
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23cxgb4: fix setting of the function number in transmit descriptorsDimitris Michailidis
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23cxgb4: support eeprom read/write on functions other than 0Dimitris Michailidis
Extend the address translation for eeprom read/write (code used by ethtool -[eE]) to functions other than 0. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23cxgb4: handle Rx/Tx queue ranges not starting at 0Dimitris Michailidis
Currently the driver assumes that queue IDs start at 0 but that's true only for function 0. To support operation on other functions get the start of the queue ranges from FW and offset accordingly. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23bna: Delete get_flags and set_flags ethtool methods.David S. Miller
This driver doesn't support LRO, NTUPLE, or the RXHASH features. So it should not set these ethtool operations. This also fixes the warning: drivers/net/bna/bnad_ethtool.c:1272: warning: initialization from incompatible pointer type Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23bna: Brocade 10Gb Ethernet device driverRasesh Mody
This is patch 1/6 which contains linux driver source for Brocade's BR1010/BR1020 10Gb CEE capable ethernet adapter. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: include/linux/if_pppox.h Fix conflict between Changli's __packed header file fixes and the new PPTP driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22mlx4: remove num_lro parameterAmerigo Wang
As suggested by David, this parameter can die, we can use ethtool to turn LRO on/off. Compile tests only. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22xen: use less generic names in netfront driver.Ian Campbell
All Xen frontend drivers have a couple of identically named functions which makes figuring out which device went wrong from a stacktrace harder than it needs to be. Rename them to something specificto the device type. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22isdn/avm: fix build when PCMCIA is not enabledRandy Dunlap
Why wouldn't kconfig symbol ISDN_DRV_AVMB1_B1PCMCIA also depend on PCMCIA? Fix build for PCMCIA not enabled: ERROR: "b1_free_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1ctl_proc_fops" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_reset_ctr" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_load_firmware" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_send_message" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_release_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_register_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_getrevision" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_detect" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_interrupt" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_alloc_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Carsten Paeth <calle@calle.de> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22bnx2: Add PCI Advanced Error Reporting support.John Feeney
Signed-off-by: John Feeney <jfeeney@redhat.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22tokenring: remove unneeded NULL checksDan Carpenter
"fw_entry" is always non-NULL at this point and anyway release_firmware() handles NULL parameters. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-08-21amd8111e: use net_device_stats from struct net_deviceEric Dumazet
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the amd8111e_priv struct. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21atl1c: use net_device_stats from struct net_deviceEric Dumazet
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the atl1c_adapter struct. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)Dmitry Kozlov
PPP: introduce "pptp" module which implements point-to-point tunneling protocol using pppox framework NET: introduce the "gre" module for demultiplexing GRE packets on version criteria (required to pptp and ip_gre may coexists) NET: ip_gre: update to use the "gre" module This patch introduces then pptp support to the linux kernel which dramatically speeds up pptp vpn connections and decreases cpu usage in comparison of existing user-space implementation (poptop/pptpclient). There is accel-pptp project (https://sourceforge.net/projects/accel-pptp/) to utilize this module, it contains plugin for pppd to use pptp in client-mode and modified pptpd (poptop) to build high-performance pptp NAS. There was many changes from initial submitted patch, most important are: 1. using rcu instead of read-write locks 2. using static bitmap instead of dynamically allocated 3. using vmalloc for memory allocation instead of BITS_PER_LONG + __get_free_pages 4. fixed many coding style issues Thanks to Eric Dumazet. Signed-off-by: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlge: pull NULL check ahead of dereferenceDan Carpenter
There was a dereference before NULL check issue introduced in 1e213303d "qlge: Add tx multiqueue support." I've pulled the NULL check of "net_rsp" forward a couple lines to avoid that. Also Ron Mercer says that the early exit should be above the index write. ql_write_cq_idx(rx_ring); Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19tehuti: Use net_device_stats from struct net_deviceTobias Klauser
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the bdx_priv struct. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ep93xx_eth: Use net_device_stats from struct net_deviceTobias Klauser
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the ep93xx_priv struct. As the new ndo_get_stats function would just return dev->stats we can omit it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-08-19qlcnic: update version 5.0.8Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: rom lock recoverySucheta Chakraborty
Fw can get stuck while holding pci semaphore. Driver will not be able to perform fw initialization, without this lock. Release semaphore forcefully in that case. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: firmware initialization updateSony Chacko
Cleanup legacy code which is not valid for Qlogic CNA adapters. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: fix endiness in eswitch statisticsAmit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: mark device state as failedAmit Kumar Salecha
Mark device state failed in error path. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: fix npar stateAmit Kumar Salecha
Privilege functions should wait for npar state to be operational. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: support anti mac spoofingSony Chacko
Administrator can configure to drop packet in transmit, if it doesn't match interface mac address, in case of virtual function. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: configure offload setting on eswitchRajesh Borundia
Device is not capable of enabling/disabling offload setting per port in case of Nic Partition.So offload settings needs to be enabled/disabled per eswitch and it will affect all the function on that eswitch. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: configure port on eswitchRajesh Borundia
o Nic partition capable devices has embedded switch, this needs to support various features like external switch. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: replace magic numbers with definesSony Chacko
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: remove unused codeSony Chacko
Serial number references are not used in driver. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: fix inconsistent lock stateAmit Kumar Salecha
Spin_lock(rds_ring->lock) is not required while posting buffers from qlcnic_open and freeing buffers from qlcnic_down. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-18 03:23:44 +0000