summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-01-21Merge branch 'media_fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits) [media] staging/lirc: fix mem leaks and ptr err usage [media] hdpvr: reduce latency of i2c read/write w/recycled buffer [media] hdpvr: enable IR part [media] rc/mceusb: timeout should be in ns, not us [media] v4l2-device: fix 'use-after-freed' oops [media] v4l2-dev: don't memset video_device.dev [media] zoran: use video_device_alloc instead of kmalloc [media] w9966: zero device state after a detach [media] v4l: Fix a use-before-set in the control framework [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h [media] DocBook/v4l: update V4L2 revision and update copyright years [media] DocBook/v4l: fix validation error in dev-rds.xml [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs [media] v4l2-ctrls: fix missing 'read-only' check [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71 [media] lirc_zilog: Update TODO.lirc_zilog [media] lirc_zilog: Add Andy Walls to copyright notice and authors list [media] lirc_zilog: Remove useless struct i2c_driver.command function [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function ...
2011-01-21Merge branches 'fixes' and 'fwnet' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: fix unstable I/O with Canon camcorder * 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: net: is not experimental anymore firewire: net: invalidate ARP entries of removed nodes
2011-01-21Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc/mpic: Fix mask/unmask timeout message powerpc/pseries: Add BNX2=m to defconfig powerpc: Enable 64kB pages and 1024 threads in pseries config powerpc: Disable mcount tracers in pseries defconfig powerpc/boot/dts: Install dts from the right directory powerpc: machine_check_generic is wrong on 64bit powerpc: Check RTAS extended log flag before checking length powerpc: Fix corruption when grabbing FWNMI data powerpc: Rework pseries machine check handler powerpc: Don't silently handle machine checks from userspace powerpc: Remove duplicate debugger hook in machine_check_exception powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check powerpc: Don't force MSR_RI in machine_check_exception powerpc: Print 32 bits of DSISR in show_regs powerpc/kdump: Disable ftrace during kexec powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler powerpc/kexec: Remove empty ppc_md.machine_kexec_prepare powerpc/kexec: Don't initialise kexec hooks to default handlers powerpc/kdump: Remove ppc_md.machine_crash_shutdown powerpc/kexec: Remove ppc_md.machine_kexec ...
2011-01-21powerpc/macintosh: Fix wrong test in fan_{read,write}_reg()roel kluin
Fix error test in fan_{read,write}_reg() Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20ACPI / PM: Call suspend_nvs_free() earlier during resumeRafael J. Wysocki
It turns out that some device drivers map pages from the ACPI NVS region during resume using ioremap(), which conflicts with ioremap_cache() used for mapping those pages by the NVS save/restore code in nvs.c. Make the NVS pages mapped by the code in nvs.c be unmapped before device drivers' resume routines run. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20ACPI: Introduce acpi_os_ioremap()Rafael J. Wysocki
Commit ca9b600be38c ("ACPI / PM: Make suspend_nvs_save() use acpi_os_map_memory()") attempted to prevent the code in osl.c and nvs.c from using different ioremap() variants by making the latter use acpi_os_map_memory() for mapping the NVS pages. However, that also requires acpi_os_unmap_memory() to be used for unmapping them, which causes synchronize_rcu() to be executed many times in a row unnecessarily and introduces substantial delays during resume on some systems. Instead of using acpi_os_map_memory() for mapping the NVS pages in nvs.c introduce acpi_os_ioremap() calling ioremap_cache() and make the code in both osl.c and nvs.c use it. Reported-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20Merge branch 'akpm'Linus Torvalds
* akpm: kernel/smp.c: consolidate writes in smp_call_function_interrupt() kernel/smp.c: fix smp_call_function_many() SMP race memcg: correctly order reading PCG_USED and pc->mem_cgroup backlight: fix 88pm860x_bl macro collision drivers/leds/ledtrig-gpio.c: make output match input, tighten input checking MAINTAINERS: update Atmel AT91 entry mm: fix truncate_setsize() comment memcg: fix rmdir, force_empty with THP memcg: fix LRU accounting with THP memcg: fix USED bit handling at uncharge in THP memcg: modify accounting function for supporting THP better fs/direct-io.c: don't try to allocate more than BIO_MAX_PAGES in a bio mm: compaction: prevent division-by-zero during user-requested compaction mm/vmscan.c: remove duplicate include of compaction.h memblock: fix memblock_is_region_memory() thp: keep highpte mapped until it is no longer needed kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
2011-01-20backlight: fix 88pm860x_bl macro collisionRandy Dunlap
Fix collision with kernel-supplied #define: drivers/video/backlight/88pm860x_bl.c:24:1: warning: "CURRENT_MASK" redefined arch/x86/include/asm/page_64_types.h:6:1: warning: this is the location of the previous definition Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20drivers/leds/ledtrig-gpio.c: make output match input, tighten input checkingJanusz Krzysztofik
Replicate changes made to drivers/leds/ledtrig-backlight.c. Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20Merge branch 'tty-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: update MAINTAINERS file due to driver movement tty: move drivers/serial/ to drivers/tty/serial/ tty: move hvc drivers to drivers/tty/hvc/
2011-01-20Merge branch 'xen/xenbus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'xen/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xenbus: Fix memory leak on release xenbus: avoid zero returns from read() xenbus: add missing wakeup in concurrent read/write xenbus: allow any xenbus command over /proc/xen/xenbus xenfs/xenbus: report partial reads/writes correctly
2011-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: virtio: remove virtio-pci root device LGUEST_GUEST: fix unmet direct dependencies (VIRTUALIZATION && VIRTIO) lguest: compile fixes lguest: Use this_cpu_ops lguest: document --rng in example Launcher lguest: example launcher to use guard pages, drop PROT_EXEC, fix limit logic lguest: --username and --chroot options
2011-01-20Merge branch 'acpica' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPICA: Update version to 20110112 ACPICA: Update all ACPICA copyrights and signons to 2011 ACPICA: Fix issues/fault with automatic "serialized" method support ACPICA: Debugger: Lock namespace for duration of a namespace dump ACPICA: Fix namespace race condition ACPICA: Fix memory leak in acpi_ev_asynch_execute_gpe_method().
2011-01-20i915: Fix i915 suspend delayLinus Torvalds
During system suspend, the "wait for ring buffer to empty" loop would always time out after three seconds, because the faster cached ring buffer head read would always return zero. Force the slow-and-careful PIO read on all but the first iterations of the loop to fix it. This also removes the unused (and useless) 'actual_head' variable that tried to approximate doing this, but did it incorrectly. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dave Airlie <airlied@linux.ie> Cc: DRI mailing list <dri-devel@lists.freedesktop.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21firewire: net: is not experimental anymoreStefan Richter
thanks to Clemens' and Maxim's fixes to firewire-ohci and -net in the last two kernel releases. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-01-21firewire: net: invalidate ARP entries of removed nodesMaxim Levitsky
This makes it possible to resume communication with a node that dropped off the bus for a brief period. Otherwise communication will only be possible after ARP cache entry timeouts. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased)
2011-01-21firewire: core: fix unstable I/O with Canon camcorderStefan Richter
Regression since commit 10389536742c, "firewire: core: check for 1394a compliant IRM, fix inaccessibility of Sony camcorder": The camcorder Canon MV5i generates lots of bus resets when asynchronous requests are sent to it (e.g. Config ROM read requests or FCP Command write requests) if the camcorder is not root node. This causes drop- outs in videos or makes the camcorder entirely inaccessible. https://bugzilla.redhat.com/show_bug.cgi?id=633260 Fix this by allowing any Canon device, even if it is a pre-1394a IRM like MV5i are, to remain root node (if it is at least Cycle Master capable). With the FireWire controller cards that I tested, MV5i always becomes root node when plugged in and left to its own devices. Reported-by: Ralf Lange Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> # 2.6.32.y and newer
2011-01-20ACPI / Battery: remove battery refresh on resumeLinus Torvalds
This partially reverts commit da8aeb92d4853f37e281f11fddf61f9c7d84c3cd ("ACPI / Battery: Update information on info notification and resume"), which causes a hang on resume on at least some machines. This bug was bisected on an ASUS EeePC 901, which hangs at resume time if we do that "acpi_battery_refresh(battery)" in the battery resume function. Rafael suspects we'll still need to refresh the sysfs files upon resume, but that that can be done from a PM notifier (that will run after thawing user space). Bisected-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg@redhat.com> Cc: Len Brown <len.brown@intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20virtio: remove virtio-pci root deviceMilton Miller
We sometimes need to map between the virtio device and the given pci device. One such use is OS installer that gets the boot pci device from BIOS and needs to find the relevant block device. Since it can't, installation fails. Instead of creating a top-level devices/virtio-pci directory, create each device under the corresponding pci device node. Symlinks to all virtio-pci devices can be found under the pci driver link in bus/pci/drivers/virtio-pci/devices, and all virtio devices under drivers/bus/virtio/devices. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gleb Natapov <gleb@redhat.com> Tested-by: "Daniel P. Berrange" <berrange@redhat.com> Cc: stable@kernel.org
2011-01-20lguest: compile fixesRusty Russell
arch/x86/lguest/boot.c: In function ‘lguest_init_IRQ’: arch/x86/lguest/boot.c:824: error: macro "__this_cpu_write" requires 2 arguments, but only 1 given arch/x86/lguest/boot.c:824: error: ‘__this_cpu_write’ undeclared (first use in this function) arch/x86/lguest/boot.c:824: error: (Each undeclared identifier is reported only once arch/x86/lguest/boot.c:824: error: for each function it appears in.) drivers/lguest/x86/core.c: In function ‘copy_in_guest_info’: drivers/lguest/x86/core.c:94: error: lvalue required as left operand of assignment Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-20lguest: Use this_cpu_opsChristoph Lameter
Use this_cpu_ops in a couple of places in lguest. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) sctp: user perfect name for Delayed SACK Timer option net: fix can_checksum_protocol() arguments swap Revert "netlink: test for all flags of the NLM_F_DUMP composite" gianfar: Fix misleading indentation in startup_gfar() net/irda/sh_irda: return to RX mode when TX error net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan. USB CDC NCM: tx_fixup() race condition fix ns83820: Avoid bad pointer deref in ns83820_init_one(). ipv6: Silence privacy extensions initialization bnx2x: Update bnx2x version to 1.62.00-4 bnx2x: Fix AER setting for BCM57712 bnx2x: Fix BCM84823 LED behavior bnx2x: Mark full duplex on some external PHYs bnx2x: Fix BCM8073/BCM8727 microcode loading bnx2x: LED fix for BCM8727 over BCM57712 bnx2x: Common init will be executed only once after POR bnx2x: Swap BCM8073 PHY polarity if required iwlwifi: fix valid chain reading from EEPROM ath5k: fix locking in tx_complete_poll_work ath9k_hw: do PA offset calibration only on longcal interval ...
2011-01-19[media] staging/lirc: fix mem leaks and ptr err usageJarod Wilson
When the lirc drivers were converted over to using memdup_user, I mistakenly also removed corresponding calls to kfree. Add those back. I also screwed up on the allocation error check in lirc_serial, using if (PTR_ERR()) instead of if (IS_ERR()), which broke transmit. Reported-by: Jiri Fojtasek <jiri.fojtasek@hlohovec.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] hdpvr: reduce latency of i2c read/write w/recycled bufferJarod Wilson
The current hdpvr code kmalloc's a new buffer for every i2c read and write. Rather than do that, lets allocate a buffer in the driver's device struct and just use that every time. The size I've chosen for the buffer is the maximum size I could ascertain might be used by either ir-kbd-i2c or lirc_zilog, plus a bit of padding (lirc_zilog may use up to 100 bytes on tx, rounded that up to 128). Note that this might also remedy user reports of very sluggish behavior of IR receive with hdpvr hardware. v2: make sure (len <= (dev->i2c_buf)) [Jean Delvare] Reported-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] hdpvr: enable IR partJarod Wilson
A number of things going on here, but the end result is that the IR part on the hdpvr gets enabled, and can be used with ir-kbd-i2c and/or lirc_zilog. First up, there are some conditional build fixes that come into play whether i2c is built-in or modular. Second, we're swapping out i2c_new_probed_device() for i2c_new_device(), as in my testing, probing always fails, but we *know* that all hdpvr devices have a z8 chip at 0x70 and 0x71. Third, we're poking at an i2c address directly without a client, and writing some magic bits to actually turn on this IR part (this could use some improvement in the future). Fourth, some of the i2c_adapter storage has been reworked, as the existing implementation used to lead to an oops following i2c changes c. 2.6.31. Earlier editions of this patch have been floating around the 'net for a while, including being patched into Fedora kernels, and they *do* work. This specific version isn't yet tested, beyond loading ir-kbd-i2c and confirming that it does bind to the RX address of the hdpvr. [mchehab@redhat.com: I2C_CLASS_TV_ANALOG is not defined. Fix compilation bug] Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] rc/mceusb: timeout should be in ns, not usJarod Wilson
Fixes an egregious bug in mceusb driver, where the receiver was being put into idle mode far sooner than it should have, thanks to storing a timeout value that in us where it should be ns. Basically, the receiver kept going into idle mode before a trailing space had been fully received, which was causing problems for some protocols, most notably manifesting as lirc userspace never receiving a trailing space for any rc5 signals. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l2-device: fix 'use-after-freed' oopsHans Verkuil
Fix a bug in v4l2_device_unregister where the sd pointer can be dereferenced after it was freed. Normally the i2c adapter is removed before this function is called. Removing the adapter will also unregister all subdevs on that adapter, so generally v4l2_device_unregister has nothing to do. However, in the case of a platform i2c bus that bus is generally not freed. In that case, after freeing the i2c subdevice the code will fall into the second block when it tests if the subdev is a SPI device. But by that time the subdev is already freed and the kernel oopses. The fix is trivial: continue with the loop after freeing the i2c or spi subdevice. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reported-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l2-dev: don't memset video_device.devHans Verkuil
Zeroing video_device.dev causes a memory leak if video_set_drvdata was called before video_register_device was called. video_set_drvdata calls dev_set_drvdata which allocates video_device.dev.p. memsetting this will prevent freeing of that memory. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] zoran: use video_device_alloc instead of kmallocHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] w9966: zero device state after a detachHans Verkuil
After a detach zero the whole device state to ensure a clean slate on the next attach. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l: Fix a use-before-set in the control frameworkLaurent Pinchart
v4l2_queryctrl sets the step value based on the control type. That would be fine if it used the control type stored in the V4L2 kernel control object, not the one stored in the userspace ioctl structure that has just been memset to 0. Fix this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l2-ctrls: queryctrl shouldn't attempt to replace ↵Hans Verkuil
V4L2_CID_PRIVATE_BASE IDs When queryctrl is called with a V4L2_CID_PRIVATE_BASE control ID, then currently it is replaced by the real internal ID. This is not according to the spec so keep the V4L2_CID_PRIVATE_BASE ID in this case. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] v4l2-ctrls: fix missing 'read-only' checkHans Verkuil
VIDIOC_S_CTRL did not check against read-only controls. Even worse, for controls of type CTRL_CLASS it would cause a kernel oops since those controls do not have a s_ctrl op. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] pvrusb2: Provide more information about IR units to lirc_zilog and ↵Andy Walls
ir-kbd-i2c When registering an IR Rx device with the I2C subsystem, provide more detailed information about the IR device and default remote configuration for the IR driver modules. Also explicitly register any IR Tx device with the I2C subsystem. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71Andy Walls
This reverts a portion of commit 44243fc2ef99948bc9b046901880885616dd5e89 A commit for which I errantly recommended that defaults for I2C address 0x71 not be set by ir-kbd-i2c.c The pvrusb2 and bttv drivers currently rely on ir-kbd-i2c setting defaults for that address. Until I can get those bridge drivers fixed to properly send IR_i2c_init_data for boards with Zilog Z8 chips, just add back the default settings for I2C address 0x71. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Update TODO.lirc_zilogAndy Walls
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Add Andy Walls to copyright notice and authors listAndy Walls
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Remove useless struct i2c_driver.command functionAndy Walls
The ir_command() function is a do-nothing stub; remove it. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Remove unneeded tests for existence of the IR Tx functionAndy Walls
The driver is now structured so that it must handle an IR Tx unit for a Z8 IR chip, or it refuses to handle that Z8 IR chip. This allows us to assume that ir->tx != NULL in a few places in the driver, and also allows us to always report Tx is available to userspace. Get rid of unneeded tests for ir->tx == NULL and always report that Tx is available. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Update IR Rx polling kthread start/stop and some printksAndy Walls
The IR Rx polling thread was originally a kernel_thread long ago, and had only been minimally converted to a kthread. This patch finishes that conversion by - cleaning up all the unneeded completions - destroying the kthread properly by calling kthread_stop() - changing lirc_thread() to test kthread_should_stop() just before every point where it may sleep - reorganizing the lirc_thread() function so it uses fewer lines - modifying the name of the kthread from "lirc_zilog" to "zilog-rx-i2c-N", so ps will show which kthread polls which Zilog Z8 IR unit. Also some minor tweaks were made to logging emitted by the ir_probe() function. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Extensive rework of ir_probe()/ir_remove()Andy Walls
This patch is an extensive rework of the ir_probe() and ir_remove() functions. It removes all the double binding and allocation problems on module load. It removes almost all the memory leaks on module exit and on device instantiation failure. Proper destruction of the Rx polling kthread still needs investigation and more work, but it is no worse than it already was. This rework also had side effects that include: - encapsulation of the ir_devices[] array - serialization of access to the ir_devices[] array - semantic change of the module parameter "disable_rx" to "tx_only" If tx_only is true, the module does not claim the i2c_client for the IR Rx function, and only claims and handles the i2c_client for the IR Tx function. This is a first step in providing the option of letting ir-kbd-i2c.c handle IR Rx function, while lirc_zilog handles the IR Tx function. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Don't make private copies of i2c clientsAndy Walls
Don't make private copies of the i2c clients provided by the I2C subsystem, don't change the client address field, and don't probe the client addresses - the bridge driver already did that. This moves us to the proper I2C and binding model. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Split struct IR into structs IR, IR_tx, and IR_rxAndy Walls
This change is a mostly mechanical break of the main struct IR data structure into common, Rx, and Tx structures. There were some small logical changes required as well, such as eliminating "is_hdpvr", to accomplish this. This change is an intiial step in reworking lirc_zilog to decouple the Rx and Tx handling as much as possible to fit with the new I2C binding model. This change actually makes lirc_zilog a little more broken than it already was - memory deallocation in particular got worse. However, this change makes the remaining problems easier to see and address. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Remove disable_tx module parameterAndy Walls
The only reason to use the lirc_zilog module is for IR Tx, so remove the possibility of disabling IR Tx. If the user needs only IR Rx, then the ir-kbd-i2c module works just fine, and doesn't require a "firmware" image. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Reword debug message in ir_probe()Andy Walls
Jean Delvare <khali@linux-fr.org> suggested this better format for debug output in ir_probe(). Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] firedtv: fix remote control with newer Xorg evdevStefan Richter
After a recent update of xf86-input-evdev and xorg-server, I noticed that X11 applications did not receive keypresses from the FireDTV infrared remote control anymore. Instead, the Xorg log featured lots of "FireDTV remote control: dropping event due to full queue!" exclamations. The Linux console did not have an issue with the FireDTV's RC though. The fix is to insert EV_SYN events after the key-down/-up events. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] tm6000: rework init codeDmitri Belimov
Rework device init part. Move common code part to a function. Usefull for register multiple devices like video, radio, vbi etc. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] radio-aimslab.c needs #include <linux/delay.h>Geert Uytterhoeven
Commit e3c92215198cb6aa00ad38db2780faa6b72e0a3f ("[media] radio-aimslab.c: Fix gcc 4.5+ bug") removed the include, but introduced new callers of msleep(): | drivers/media/radio/radio-aimslab.c: In function ‘rt_decvol’: | drivers/media/radio/radio-aimslab.c:76: error: implicit declaration of function ‘msleep’ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] ir-raw: fix sparse non-ANSI function warningRandy Dunlap
Fix sparse warning for non-ANSI function declaration: drivers/media/rc/ir-raw.c:247:30: warning: non-ANSI function declaration of function 'ir_raw_get_allowed_protocols' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>