summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2015-01-18Merge tag 'armsoc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "We've been sitting on our fixes branch for a while, so this batch is unfortunately on the large side. A lot of these are tweaks and fixes to device trees, fixing various bugs around clocks, reg ranges, etc. There's also a few defconfig updates (which are on the late side, no more of those). All in all the diffstat is bigger than ideal at this time, but nothing in here seems particularly risky" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) reset: sunxi: fix spinlock initialization ARM: dts: disable CCI on exynos5420 based arndale-octa drivers: bus: check cci device tree node status ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 ARM: nomadik: fix up leftover device tree pins ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ARM: at91/dt: sam9263: Add missing clocks to lcdc node ARM: at91: sama5d3: dt: correct the sound route ARM: at91/dt: sama5d4: fix the timer reg length ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: dts: berlin: correct BG2Q's SM GPIO location. ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host ARM: dts: Revert disabling of smc91x for n900 ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling ARM: dts: dra7-evm: fix qspi device tree partition size ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT ...
2015-01-18Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock driver fixes from Mike Turquette: "Small number of fixes for clock drivers and a single null pointer dereference fix in the framework core code. The driver fixes vary from fixing section mismatch warnings to preventing machines from hanging (and preventing developers from crying)" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: fix possible null pointer dereference Revert "clk: ppc-corenet: Fix Section mismatch warning" clk: rockchip: fix deadlock possibility in cpuclk clk: berlin: bg2q: remove non-exist "smemc" gate clock clk: at91: keep slow clk enabled to prevent system hang clk: rockchip: fix rk3288 cpuclk core dividers clk: rockchip: fix rk3066 pll lock bit location clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host
2015-01-18Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is one fix for a Multiqueue sleeping in invalid context problem and a MAINTAINER file update for Qlogic" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ->queue_rq can't sleep MAINTAINERS: Update maintainer list for qla4xxx
2015-01-17clk: fix possible null pointer dereferenceStanimir Varbanov
The commit 646cafc6 (clk: Change clk_ops->determine_rate to return a clk_hw as the best parent) opens a possibility for null pointer dereference, fix this. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-17Revert "clk: ppc-corenet: Fix Section mismatch warning"Kevin Hao
This reverts commit da788acb28386aa896224e784954bb73c99ff26c. That commit tried to fix the section mismatch warning by moving the ppc_corenet_clk_driver struct to init section. This is definitely wrong because the kernel would free the memories occupied by this struct after boot while this driver is still registered in the driver core. The kernel would panic when accessing this driver struct. Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-17clk: rockchip: fix deadlock possibility in cpuclkHeiko Stübner
Lockdep reported a possible deadlock between the cpuclk lock and for example the i2c driver. CPU0 CPU1 ---- ---- lock(clk_lock); local_irq_disable(); lock(&(&i2c->lock)->rlock); lock(clk_lock); <Interrupt> lock(&(&i2c->lock)->rlock); *** DEADLOCK *** The generic clock-types of the core ccf already use spin_lock_irqsave when touching clock registers, so do the same for the cpuclk. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> [mturquette@linaro.org: removed initialization of "flags"]
2015-01-18Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: "Two patches, the first by Andy to fix dw dmac runtime pm and second one by me to fix the dmaengine headers in MAINTAINERS" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw: balance PM runtime calls MAINTAINERS: dmaengine: fix the header file for dmaengine
2015-01-16reset: sunxi: fix spinlock initializationTyler Baker
Call spin_lock_init() before the spinlocks are used, both in early init and probe functions preventing a lockdep splat. I have been observing lockdep complaining [1] during boot on my a80 optimus [2] when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat, and has been tested on a few other sunxi platforms without issue. [1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html [2] http://kernelci.org/boot/?a80-optimus Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Cc: <stable@vger.kernel.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-16drivers: bus: check cci device tree node statusAbhilash Kesavan
The arm-cci driver completes the probe sequence even if the cci node is marked as disabled. Add a check in the driver to honour the cci status in the device tree. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-17Merge tag 'char-misc-3.19-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are three small driver fixes for reported issues for 3.19-rc5. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0 mei: add ABI documentation for fw_status exported through sysfs mei: clean reset bit before reset
2015-01-17Merge tag 'tty-3.19-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some tty and serial driver fixes for 3.19-rc5 that resolve some reported issues, and add a new device id to the 8250 serial port driver. All have been in linux-next with no reported problems" * tag 'tty-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: samsung: Add the support for Exynos5433 SoC Revert "tty: Fix pty master poll() after slave closes v2" tty: Prevent hw state corruption in exclusive mode reopen tty: Add support for the WCH384 4S multi-IO card serial: fix parisc boot hang
2015-01-17Merge tag 'staging-3.19-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are 6 staging driver fixes for 3.19-rc5. They fix some reported issues with some IIO drivers, as well as some issues with the vt6655 wireless driver. All have been in linux-next for a while" * tag 'staging-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt6655: fix sparse warning: argument type staging: vt6655: Fix loss of distant/weak access points on channel change. staging: vt6655: vnt_tx_packet Fix corrupted tx packets. staging: vt6655: fix sparse warnings: incorrect argument type iio: iio: Fix iio_channel_read return if channel havn't info iio: ad799x: Fix ad7991/ad7995/ad7999 config setup
2015-01-17Merge tag 'usb-3.19-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here is a bunch of USB fixes for 3.19-rc5. Most of these are gadget driver fixes, along with the xhci driver fix that we both reported having problems with, as well as some new device ids and other tiny fixes. All have been in linux-next with no problems" * tag 'usb-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits) usb: dwc3: gadget: Stop TRB preparation after limit is reached usb: dwc3: gadget: Fix TRB preparation during SG usb: phy: mv-usb: fix usb_phy build errors usb: serial: handle -ENODEV quietly in generic_submit_read_urb usb: serial: silence all non-critical read errors USB: console: fix potential use after free USB: console: fix uninitialised ldisc semaphore usb: gadget: udc: atmel: fix possible oops when unloading module usb: gadget: gadgetfs: fix an oops in ep_write() usb: phy: Fix deferred probing OHCI: add a quirk for ULi M5237 blocking on reset uas: Add US_FL_NO_ATA_1X for 2 more Seagate disk enclosures uas: Do not blacklist ASM1153 disk enclosures usb: gadget: udc: avoid dereference before NULL check in ep_queue usb: host: ehci-tegra: request deferred probe when failing to get phy uas: disable UAS on Apricorn SATA dongles uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS566 with usb-id 0bc2:a013 uas: Add US_FL_NO_ATA_1X for Seagate devices with usb-id 0bc2:a013 xhci: Add broken-streams quirk for Fresco Logic FL1000G xhci controllers USB: EHCI: adjust error return code ...
2015-01-16Merge tag 'fbdev-fixes-3.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - broadsheetfb: fix memory leak - simplefb: fix build failure on sparc * tag 'fbdev-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: fbdev/broadsheetfb: fix memory leak simplefb: Fix build failure on Sparc
2015-01-16Merge tag 'mmc-v3.19-4' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC bugfix from Ulf Hansson: "Fix sdhci regulator regression for Qualcomm and Nvidia boards" * tag 'mmc-v3.19-4' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci: Set SDHCI_POWER_ON with external vmmc
2015-01-16Merge tag 'powerpc-3.19-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: "A few powerpc fixes" * tag 'powerpc-3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc: Work around gcc bug in current_thread_info() cxl: Fix issues when unmapping contexts powernv: Fix OPAL tracepoint code
2015-01-15Merge branch 'thermal-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fixes from Zhang Rui: "Specifics: - bogus type qualifier fix in OF thermal code. - Minor fixes on imx and rcar thermal drivers. - Update TI SoC thermal maintainer entry. - Updated documentation of OF cpufreq cooling register" * 'thermal-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: rcar: Spelling/grammar: s/drier use .../driver uses ...s/ thermal: rcar: change type of ctemp in rcar_thermal_update_temp() thermal: rcar: fix ENR register value Documentation: thermal: document of_cpufreq_cooling_register() Thermal: imx: add clk disable/enable for suspend/resume MAINTAINERS: update ti-soc-thermal status MAINTAINERS: Add linux-omap to list of reviewers for TI Thermal thermal: of: Remove bogus type qualifier for of_thermal_get_trip_points()
2015-01-14Merge tag 'fixes-for-v3.19-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.19-rc6 The final set of fixes for v3.19. Two of the fixes are related to dwc3 scatter/gather implementation when we have more requests queued than available TRBs, while the other is a build fix for mv-usb PHY. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-14Merge tag 'usb-serial-3.19-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v3.18-rc5 Here are a few fixes for reported problems including a possible null-deref on probe with keyspan, a misbehaving modem, and a couple of issues with the USB console. Some new device IDs are also added. Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't use uninitialized data in IPVS, from Dan Carpenter. 2) conntrack race fixes from Pablo Neira Ayuso. 3) Fix TX hangs with i40e, from Jesse Brandeburg. 4) Fix budget return from poll calls in dnet and alx, from Eric Dumazet. 5) Fix bugus "if (unlikely(x) < 0)" test in AF_PACKET, from Christoph Jaeger. 6) Fix bug introduced by conversion to list_head in TIPC retransmit code, from Jon Paul Maloy. 7) Don't use GFP_NOIO under spinlock in USB kaweth driver, from Alexey Khoroshilov. 8) Fix bridge build with INET disabled, from Arnd Bergmann. 9) Fix netlink array overrun for PROBE attributes in openvswitch, from Thomas Graf. 10) Don't hold spinlock across synchronize_irq() in tg3 driver, from Prashant Sreedharan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) tg3: Release tp->lock before invoking synchronize_irq() tg3: tg3_reset_task() needs to use rtnl_lock to synchronize tg3: tg3_timer() should grab tp->lock before checking for tp->irq_sync team: avoid possible underflow of count_pending value for notify_peers and mcast_rejoin openvswitch: packet messages need their own probe attribtue i40e: adds FCoE configure option cxgb4vf: Fix queue allocation for 40G adapter netdevice: Add missing parentheses in macro bridge: only provide proxy ARP when CONFIG_INET is enabled neighbour: fix base_reachable_time(_ms) not effective immediatly when changed net: fec: fix MDIO bus assignement for dual fec SoC's xen-netfront: use different locks for Rx and Tx stats drivers: net: cpsw: fix multicast flush in dual emac mode cxgb4vf: Initialize mdio_addr before using it net: Corrected the comment describing the ndo operations to reflect the actual prototype for couple of operations usb/kaweth: use GFP_ATOMIC under spin_lock in usb_start_wait_urb() MAINTAINERS: add me as ibmveth maintainer tipc: fix bug in broadcast retransmit code update ip-sysctl.txt documentation (v2) net/at91_ether: prepare and unprepare clock ...
2015-01-14tg3: Release tp->lock before invoking synchronize_irq()Prashant Sreedharan
synchronize_irq() can sleep waiting, for pending IRQ handlers so driver should release the tp->lock spin lock before invoking synchronize_irq() Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14tg3: tg3_reset_task() needs to use rtnl_lock to synchronizePrashant Sreedharan
Currently tg3_reset_task() uses only tp->lock for synchronizing with code paths like tg3_open() etc. But since tp->lock is released before doing synchronize_irq(), rtnl_lock should be taken in tg3_reset_task() to synchronize it with other code paths. Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14tg3: tg3_timer() should grab tp->lock before checking for tp->irq_syncPrashant Sreedharan
This is to avoid the race between tg3_timer() and the execution paths which does not invoke tg3_timer_stop() and releases tp->lock before calling synchronize_irq() Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14team: avoid possible underflow of count_pending value for notify_peers and ↵Jiri Pirko
mcast_rejoin This patch is fixing a race condition that may cause setting count_pending to -1, which results in unwanted big bulk of arp messages (in case of "notify peers"). Consider following scenario: count_pending == 2 CPU0 CPU1 team_notify_peers_work atomic_dec_and_test (dec count_pending to 1) schedule_delayed_work team_notify_peers atomic_add (adding 1 to count_pending) team_notify_peers_work atomic_dec_and_test (dec count_pending to 1) schedule_delayed_work team_notify_peers_work atomic_dec_and_test (dec count_pending to 0) schedule_delayed_work team_notify_peers_work atomic_dec_and_test (dec count_pending to -1) Fix this race by using atomic_dec_if_positive - that will prevent count_pending running under 0. Fixes: fc423ff00df3a1955441 ("team: add peer notification") Fixes: 492b200efdd20b8fcfd ("team: add support for sending multicast rejoins") Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Two small performance tweaks, the plumbing for the execveat system call and a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uprobes: fix user space PER events s390/bpf: Fix JMP_JGE_X (A > X) and JMP_JGT_X (A >= X) s390/bpf: Fix ALU_NEG (A = -A) s390/mm: avoid using pmd_to_page for !USE_SPLIT_PMD_PTLOCKS s390/timex: fix get_tod_clock_ext() inline assembly s390: wire up execveat syscall s390/kernel: use stnsm 255 instead of stosm 0 s390/vtime: Get rid of redundant WARN_ON s390/zcrypt: kernel oops at insmod of the z90crypt device driver
2015-01-14i40e: adds FCoE configure optionVasu Dev
Adds FCoE config option I40E_FCOE, so that FCoE can be enabled as needed but otherwise have it disabled by default. This also eliminate multiple FCoE config checks, instead now just one config check for CONFIG_I40E_FCOE. The I40E FCoE was added with 3.17 kernel and therefore this patch shall be applied to stable 3.17 kernel also. CC: <stable@vger.kernel.org> Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14cxgb4vf: Fix queue allocation for 40G adapterHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "The major part is an update to the NVMe driver, fixing various issues around surprise removal and hung controllers. Most of that is from Keith, and parts are simple blk-mq fixes or exports/additions of minor functions to aid this effort, and parts are changes directly to the NVMe driver. Apart from the above, this contains: - Small blk-mq change from me, killing an unused member of the hardware queue structure. - Small fix from Ming Lei, fixing up a few drivers that didn't properly check for ERR_PTR() returns from blk_mq_init_queue()" * 'for-linus' of git://git.kernel.dk/linux-block: NVMe: Fix locking on abort handling NVMe: Start and stop h/w queues on reset NVMe: Command abort handling fixes NVMe: Admin queue removal handling NVMe: Reference count admin queue usage NVMe: Start all requests blk-mq: End unstarted requests on a dying queue blk-mq: Allow requests to never expire blk-mq: Add helper to abort requeued requests blk-mq: Let drivers cancel requeue_work blk-mq: Export if requests were started blk-mq: Wake tasks entering queue on dying blk-mq: get rid of ->cmd_size in the hardware queue block: fix checking return value of blk_mq_init_queue block: wake up waiters when a queue is marked dying NVMe: Fix double free irq blk-mq: Export freeze/unfreeze functions blk-mq: Exit queue on alloc failure
2015-01-14usb: dwc3: gadget: Stop TRB preparation after limit is reachedAmit Virdi
DWC3 gadget sets up a pool of 32 TRBs for each EP during initialization. This means, the max TRBs that can be submitted for an EP is fixed to 32. Since the request queue for an EP is a linked list, any number of requests can be queued to it by the gadget layer. However, the dwc3 driver must not submit TRBs more than the pool it has created for. This limit wasn't respected when SG was used resulting in submitting more than the max TRBs, eventually leading to non-transfer of the TRBs submitted over the max limit. Root cause: When SG is used, there are two loops iterating to prepare TRBs: - Outer loop over the request_list - Inner loop over the SG list The code was missing break to get out of the outer loop. Fixes: eeb720fb21d6 (usb: dwc3: gadget: add support for SG lists) Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Amit Virdi <amit.virdi@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-14usb: dwc3: gadget: Fix TRB preparation during SGAmit Virdi
When scatter gather (SG) is used, multiple TRBs are prepared from one DWC3 request (dwc3_request). So while preparing TRBs, the 'last' flag should be set only when it is the last TRB being prepared from the last dwc3_request entry. The current implementation uses list_is_last to check if the dwc3_request is the last entry from the request_list. However, list_is_last returns false for the last entry too. This is because, while preparing the first TRB from a request, the function dwc3_prepare_one_trb modifies the request's next and prev pointers while moving the URB to req_queued. Hence, list_is_last always returns false no matter what. The correct way is not to access the modified pointers of dwc3_request but to use list_empty macro instead. Fixes: e5ba5ec833aa (usb: dwc3: gadget: fix scatter gather implementation) Signed-off-by: Amit Virdi <amit.virdi@st.com> Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-14mmc: sdhci: Set SDHCI_POWER_ON with external vmmcTim Kryger
Host controllers lacking the required internal vmmc regulator may still follow the spec with regard to the LSB of SDHCI_POWER_CONTROL. Set the SDHCI_POWER_ON bit when vmmc is enabled to encourage the controller to to drive CMD, DAT, SDCLK. This fixes a regression observed on some Qualcomm and Nvidia boards caused by 5222161 mmc: sdhci: Improve external VDD regulator support. Fixes: 52221610dd84 (mmc: sdhci: Improve external VDD regulator support) Signed-off-by: Tim Kryger <tim.kryger@gmail.com> Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-14Merge branch 'fixes' of ↵Zhang Rui
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2015-01-14net: fec: fix MDIO bus assignement for dual fec SoC'sStefan Agner
On i.MX28, the MDIO bus is shared between the two FEC instances. The driver makes sure that the second FEC uses the MDIO bus of the first FEC. This is done conditionally if FEC_QUIRK_ENET_MAC is set. However, in newer designs, such as Vybrid or i.MX6SX, each FEC MAC has its own MDIO bus. Simply removing the quirk FEC_QUIRK_ENET_MAC is not an option since other logic, triggered by this quirk, is still needed. Furthermore, there are board designs which use the same MDIO bus for both PHY's even though the second bus would be available on the SoC side. Such layout are popular since it saves pins on SoC side. Due to the above quirk, those boards currently do work fine. The boards in the mainline tree with such a layout are: - Freescale Vybrid Tower with TWR-SER2 (vf610-twr.dts) - Freescale i.MX6 SoloX SDB Board (imx6sx-sdb.dts) This patch adds a new quirk FEC_QUIRK_SINGLE_MDIO for i.MX28, which makes sure that the MDIO bus of the first FEC is used in any case. However, the boards above do have a SoC with a MDIO bus for each FEC instance. But the PHY's are not connected in a 1:1 configuration. A proper device tree description is needed to allow the driver to figure out where to find its PHY. This patch fixes that shortcoming by adding a MDIO bus child node to the first FEC instance, along with the two PHY's on that bus, and making use of the phy-handle property to add a reference to the PHY's. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14Merge branch 'leds-fixes-for-3.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED fix from Bryan Wu. * 'leds-fixes-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: netxbig: fix oops at probe time
2015-01-13xen-netfront: use different locks for Rx and Tx statsDavid Vrabel
In netfront the Rx and Tx path are independent and use different locks. The Tx lock is held with hard irqs disabled, but Rx lock is held with only BH disabled. Since both sides use the same stats lock, a deadlock may occur. [ INFO: possible irq lock inversion dependency detected ] 3.16.2 #16 Not tainted --------------------------------------------------------- swapper/0/0 just changed the state of lock: (&(&queue->tx_lock)->rlock){-.....}, at: [<c03adec8>] xennet_tx_interrupt+0x14/0x34 but this lock took another, HARDIRQ-unsafe lock in the past: (&stat->syncp.seq#2){+.-...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&stat->syncp.seq#2); local_irq_disable(); lock(&(&queue->tx_lock)->rlock); lock(&stat->syncp.seq#2); <Interrupt> lock(&(&queue->tx_lock)->rlock); Using separate locks for the Rx and Tx stats fixes this deadlock. Reported-by: Dmitry Piotrovsky <piotrovskydmitry@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13drivers: net: cpsw: fix multicast flush in dual emac modeMugunthan V N
Since ALE table is a common resource for both the interfaces in Dual EMAC mode and while bringing up the second interface in cpsw_ndo_set_rx_mode() all the multicast entries added by the first interface is flushed out and only second interface multicast addresses are added. Fixing this by flushing multicast addresses based on dual EMAC port vlans which will not affect the other emac port multicast addresses. Fixes: d9ba8f9 (driver: net: ethernet: cpsw: dual emac interface implementation) Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13leds: netxbig: fix oops at probe timeSimon Guinot
This patch fixes a NULL pointer dereference on led_dat->mode_val. Due to this bug, a kernel oops can be observed at probe time on the LaCie 2Big and 5Big v2 boards: Unable to handle kernel NULL pointer dereference at virtual address 00000008 [...] [<c03f244c>] (netxbig_led_probe) from [<c02c8c6c>] (platform_drv_probe+0x4c/0x9c) [<c02c8c6c>] (platform_drv_probe) from [<c02c72d0>] (driver_probe_device+0x98/0x25c) [<c02c72d0>] (driver_probe_device) from [<c02c7520>] (__driver_attach+0x8c/0x90) [<c02c7520>] (__driver_attach) from [<c02c5c24>] (bus_for_each_dev+0x68/0x94) [<c02c5c24>] (bus_for_each_dev) from [<c02c6408>] (bus_add_driver+0x124/0x1dc) [<c02c6408>] (bus_add_driver) from [<c02c7ac0>] (driver_register+0x78/0xf8) [<c02c7ac0>] (driver_register) from [<c000888c>] (do_one_initcall+0x80/0x1cc) [<c000888c>] (do_one_initcall) from [<c0733618>] (kernel_init_freeable+0xe4/0x1b4) [<c0733618>] (kernel_init_freeable) from [<c058db9c>] (kernel_init+0xc/0xec) [<c058db9c>] (kernel_init) from [<c0009850>] (ret_from_fork+0x14/0x24) [...] This bug was introduced by commit 588a6a99286ae30afb1339d8bc2163517b1b7dd1 ("leds: netxbig: fix attribute-creation race"). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-01-13cxgb4vf: Initialize mdio_addr before using itHariprasad Shenai
In commit 5ad24def21b205a8 ("cxgb4vf: Fix ethtool get_settings for VF driver") mdio_addr of port_info structure was used unininitialzed. Fixing it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13clk: berlin: bg2q: remove non-exist "smemc" gate clockJisheng Zhang
The "smemc" clock is removed on BG2Q SoCs. In fact, bit19 of clkenable register is for nfc. Current code use bit19 for non-exist "smemc" incorrectly, this prevents eMMC from working due to the sdhci's "core" clk is still gated. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-13clk: at91: keep slow clk enabled to prevent system hangBoris Brezillon
All slow clk users are not properly claiming it (get + prepare + enable) before using it. If all users properly claiming this clock release it, the clock is disabled, but faulty users still depends on it, and the system hangs. This fix prevents the slow clock from being disabled, and should solve the hanging issue, but offending drivers should be patched to properly claim this clock. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Bo Shen <voice.shen@atmel.com> Cc: stable@vger.kernel.org Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-14Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: "Specifics: - Fix a problem that Intel SoC DTS thermal driver does not work when CONFIG_THERMAL_INT340X is not set. - Fix a NULL pointer dereference when processor_thermal_device driver is loaded on a platform without ACPI support" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: int340x_thermal/processor_thermal_device: return failure when ACPI/int340x_thermal: enumerate INT3401 for Intel SoC DTS thermal driver ACPI/int340x_thermal: enumerate INT340X devices even if they're not in _ART/_TRT
2015-01-13dmaengine: dw: balance PM runtime callsAndy Shevchenko
In case of PCI driver we will get a warning: dw_dmac_pci 0000:00:18.0: Unbalanced pm_runtime_enable! dw_dmac_pci 0000:00:18.0: DesignWare DMA Controller, 8 channels This happens due to pm_runtime_enable() call from the driver when PM runtime is enabled by core. This patch moves that call to the platform driver where it might make sense. Fixes: bb32baf76e56 (dmaengine: dw: enable runtime PM) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13usb: phy: mv-usb: fix usb_phy build errorsArnd Bergmann
The driver was recently adapted to a core API change, but the change was incomplete, missing out the suspend helper and leaving an extraneous local variable around: usb/phy/phy-mv-usb.c: In function 'mv_otg_update_state': usb/phy/phy-mv-usb.c:341:18: warning: unused variable 'phy' [-Wunused-variable] usb/phy/phy-mv-usb.c: In function 'mv_otg_suspend': usb/phy/phy-mv-usb.c:861:16: error: 'struct usb_phy' has no member named 'state' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: e47d92545c297 ("usb: move the OTG state from the USB PHY to the OTG structure") Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-13fbdev/broadsheetfb: fix memory leakColin Ian King
static code analysis from cppcheck reports: [drivers/video/fbdev/broadsheetfb.c:673]: (error) Memory leak: sector_buffer sector_buffer is not being kfree'd on each call to broadsheet_spiflash_rewrite_sector(), so free it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13simplefb: Fix build failure on SparcHans de Goede
of_platform_device_create is only defined when CONFIG_OF_ADDRESS is set, which is normally always the case when CONFIG_OF is defined, except on Sparc, so explicitly check for CONFIG_OF_ADDRESS rather then for CONFIG_OF. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-12staging: vt6655: fix sparse warning: argument typeEddie Kovsky
Fixes following warning generated by sparse: drivers/staging/vt6655/baseband.c:2180:45: warning: incorrect type in argument 1 (different address spaces) drivers/staging/vt6655/baseband.c:2180:45: expected struct vnt_private *priv drivers/staging/vt6655/baseband.c:2180:45: got void [noderef] <asn:2>*dwIoBase Compile tested on next-20141219. Signed-off-by: Eddie Kovsky <ewk@edkovsky.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12staging: vt6655: Fix loss of distant/weak access points on channel change.Malcolm Priestley
If the asssocated access point is strong byBBVGACurrent will be adjusted accordingly. Users will nolonger see distant access points without taking down interface. When changing channel reset byBBVGACurrent back to pDevice->abyBBVGA[0] for max sensitivity. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12staging: vt6655: vnt_tx_packet Fix corrupted tx packets.Malcolm Priestley
Move PSTxDesc->m_td1TD1 to inside spin locks. if m_td1TD1.byTCR has TCR_EDP and TCR_STP are set, the interrupt handler will try and complete the buffer before it is completed. Usually on the tail of a burst of tx packets. This results in a partially completed packet being transmitted or worse sitll dead lock when skb is freed by the interrupt handler. Set head_td->m_td1TD1.byTCR to 0 in first lock of vnt_tx_packet to stop interrupt handler completing the buffer. Move Set TSR1 & ReqCount in s_cbFillTxBufHead to the second lock. cbReqCount is carried to the second lock in pTDInfo->dwReqCount without the padding removed. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12staging: vt6655: fix sparse warnings: incorrect argument typeMike Krinkin
this patch fixes following sparse warnings: drivers/staging/vt6655/device_main.c:1503:25: warning: incorrect type in argument 1 (different address spaces) drivers/staging/vt6655/device_main.c:1503:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1503:25: got struct vnt_private * drivers/staging/vt6655/device_main.c:1503:25: warning: incorrect type in argument 2 (different address spaces) drivers/staging/vt6655/device_main.c:1503:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1503:25: got struct vnt_private * drivers/staging/vt6655/device_main.c:1505:25: warning: incorrect type in argument 1 (different address spaces) drivers/staging/vt6655/device_main.c:1505:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1505:25: got struct vnt_private * drivers/staging/vt6655/device_main.c:1505:25: warning: incorrect type in argument 2 (different address spaces) drivers/staging/vt6655/device_main.c:1505:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1505:25: got struct vnt_private * Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-13Merge tag 'gpio-v3.19-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: "Here are some GPIO fixes, mainly affecting the DLN2 IRQ handling. Nothing special about them, just fixes: - Three patches fixing IRQ handling for the DLN2 - Null pointer handling for grgpio" * tag 'gpio-v3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: dln2: use bus_sync_unlock instead of scheduling work gpio: grgpio: Avoid potential NULL pointer dereference gpio: dln2: Fix gpio output value in dln2_gpio_direction_output() gpio: dln2: fix issue when an IRQ is unmasked then enabled
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-20 11:26:03 +0000