summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2012-09-07rtlwifi: rtl8192de: remove pointless conditional before kfree_skb()Wei Yongjun
Remove pointless conditional before kfree_skb(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: make use of is_zero_ether_addr()Bing Zhao
Use is_zero_ether_addr() instead of directly using memcmp() to determine if the ethernet address is all zeros. Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: parse rate info for APAvinash Patil
This patch adds support for parsing rates from cfg80211_ap_settings of start_ap handler. This in turn adds support for 11a and 11b phy configurations. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: don't disable wait_q_enabled flagAmitkumar Karwar
We should not disable "cmd_node->wait_q_enabled" flag here before calling mwifiex_insert_cmd_to_free_q() because we want to wake up the thread waiting for command completion inside this function. The wait_q_enabled flag will be disabled internally upon command completion. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: release semaphore acquired for internal scan operationAmitkumar Karwar
If "iw connect" command is fired for station interface, when heavy traffic is running on AP interface, internal scan operation performed before actual association is aborted. In this case we missed to release semaphore. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07airo: remove duplicated include from airo.cWei Yongjun
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07wl18xx: remove duplicated include from main.cWei Yongjun
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07wl3501_cs: use is_broadcast_ether_addr() instead of memcmp()Wei Yongjun
Using is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is broadcast address. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07wireless: use is_broadcast_ether_addr() instead of memcmp()Wei Yongjun
Using is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is broadcast address. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07ath9k_hw: small optimizationMohammed Shafi Shajakhan
Assign the MCI BT state locally, rather than unnecessarily calling ar9003_mci_state and updating it. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: use is_zero_ether_addr() instead of memcmp()Wei Yongjun
Using is_zero_ether_addr() instead of directly use memcmp() to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: use is_broadcast_ether_addr() instead of memcmp()Wei Yongjun
Using is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is broadcast address. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07airo: use is_zero_ether_addr() and is_broadcast_ether_addr()Wei Yongjun
Using is_zero_ether_addr() and is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07drivers/net: use is_zero_ether_addr() instead of memcmp()Wei Yongjun
Using is_zero_ether_addr() instead of directly use memcmp() to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07orinoco: use is_zero_ether_addr() instead of memcmp()Wei Yongjun
Using is_zero_ether_addr() instead of directly use memcmp() to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07ipw2200: use is_zero_ether_addr() and is_broadcast_ether_addr()Wei Yongjun
Using is_zero_ether_addr() and is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07ipw2100: use is_zero_ether_addr() and is_broadcast_ether_addr()Wei Yongjun
Using is_zero_ether_addr() and is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07wireless: ath9k-htc: only load firmware in needMing Lei
It is not necessary to hold the firmware memory during the whole driver lifetime, and obviously it does waste memory. Suppose there are 4 ath9k-htc usb dongles working, kernel has to consume about 4*50KBytes RAM to cache firmware for all dongles. After applying the patch, kernel only caches one single firmware image in RAM for all ath9k-htc devices just during system suspend/resume cycle. When system is ready for loading firmware, ath9k-htc can request the loading from usersapce. During system resume, ath9k-htc still can load the firmware which was cached in kernel memory before system suspend. Cc: ath9k-devel@lists.ath9k.org Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07bcma: don't leak memory for PCIE, MIPS, GBIT coresSaul St. John
bcma_scan_bus allocates a bcma_core for each core found on the bus, but the memory for cores handled by the bcma driver itself was not being freed when the bus was unregistered. This patch adds special handling for the PCIE, MIPS, and GBIT COMMON cores, to ensure that their memory allocation is freed as well. Note that this patch doesn't address the memory allocated for the CC core, as that was corrected in my previous patch "bcma: register cc core driver, device." Cc: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Saul St. John <saul.stjohn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-05iwlwifi: remove radio_config from eeprom_dataDavid Spinadel
No one uses it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Amit Beka <amit.beka@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05iwlwifi: reduce overhead if tracing disabledJohannes Berg
Tracing commands builds an array of trace data items even when the tracepoint is disabled. Instead, loop in the tracepoint assignment. This reduces overhead if tracing is compiled into the driver but not enabled and slightly reduces overall driver size as well: text data bss dec hex filename 114514 6509 48 121071 1d8ef before/iwlwifi.ko 114189 6509 48 120746 1d7aa after/iwlwifi.ko Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Max Stepanov <Max.Stepanov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05iwlwifi: report A-MPDU statusJohannes Berg
Since the firmware will give us an A-MPDU bit and only a single PHY information packet for all the subframes in an A-MPDU, we can easily report the minimal A-MPDU information for radiotap. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg
2012-09-04iwlwifi: fix antenna bitmaskJohannes Berg
The device only supports a maximum of three antennas, and only three bits are used, the fourth bit is the A-MPDU indicator. The only consequence of this is reporting invalid information in radiotap, so this isn't an important change. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-08-21carl9170: report A-MPDU statusChristian Lamparter
Because the hardware reports whenever an frame was either at the start, in the middle or at the end of a A-MPDU, we can easily report the information for radiotap. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-21ath9k_htc: implement sta_rc_update() mac80211 callbackAntonio Quartulli
In case of changes in the supported rates set for a given station, it is now possible to use this callback to update the current internal state of the station in the htc driver. Reported-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-21bcma: detect and register NAND flash deviceRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-21bcma: detect and register serial flash deviceRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-21Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mac80211_hwsim.c
2012-08-21iwlwifi: fix FW restart on init FWAmit Beka
When unregistered with mac80211, we can't call its functionality for FW restart, so avoid it and prevent automatic FW restart for the init firmware. Signed-off-by: Amit Beka <amit.beka@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-21iwlwifi: fix the preparation of the cardEmmanuel Grumbach
There is no need to check if the ownership has been relinquished but we should rather try to get it in a loop. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211_hwsim: add support for P2P DeviceJohannes Berg
Advertise support for P2P Device in hwsim to be able to test it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-13p54: fix powerpc gcc warningsChristian Lamparter
My commit "p54: parse output power table" introduced the following compiler warnings for powerpc-allmodconfig eeprom.c: In function 'p54_get_maxpower': eeprom.c:291 warning: comparison of distinct pointer types lacks a cast eeporm.c:292 warning: comparison of distinct pointer types lacks a cast eeprom.c:293 warning: comparison of distinct pointer types lacks a cast eeprom.c:294 warning: comparison of distinct pointer types lacks a cast This patch fixes those by using max_t(u16 which forces a type cast. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10brcmsmac: document firmware dependenciesJeff Mahoney
The brcmsmac driver requests firmware but doesn't document the dependency. This means that software that analyzes the modules to determine if firmware is needed won't detect it. Specifically, (at least) openSUSE won't install the kernel-firmware package if no hardware requires it. This patch adds the MODULE_FIRMWARE directives. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: tune rc_stats to display only valid ratesRajkumar Manoharan
This could make rc_stats more simpler and ease the debugging. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Trim rate tableSujith Manoharan
Remove ctrl_rate, cw40index, sgi_index, ht_index and calculate the rate index for TX status from the valid_rate_index that is populated at initialization time. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Remove MIMO-PS specific codeSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup TX status APISujith Manoharan
Calculate the final rate index inside ath_rc_tx_status(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Bail out properly before calculating rate indexSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Fix RTS/CTS rate selectionSujith Manoharan
The current method of assigning the RTS/CTS rate is completely broken for HT mode and breaks P2P operation. Fix this by using the basic_rates provided to the driver by mac80211. For now, choose the lowest supported basic rate for HT frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Do not set IEEE80211_TX_RC_USE_SHORT_PREAMBLESujith Manoharan
mac80211 does it for us. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Unify valid rate calculation routinesSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Remove ath_rc_set_valid_rate_idxSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Change rateset calculationSujith Manoharan
Commit "ath9k: Change rate control to use legacy rate as last MRR" resulted in the mixing of HT/legacy rates in a single rateset, which is undesirable. Revert this behavior. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup index retrieval routinesSujith Manoharan
Trim API and remove unused variables. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup ath_rc_setvalid_htratesSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup ath_rc_setvalid_ratesSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Cleanup RC init APISujith Manoharan
A reference to the rate table is stored inside the private structure, so there is no need to pass "rate_table" around. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath9k: Simplify rate table initializationSujith Manoharan
Remove various local variables that duplicate information already stored in mac80211. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-06 06:04:45 +0000