summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2010-08-28mlx4: use bitmap libraryAkinobu Mita
Replace loops calling set_bit() and clear_bit() with bitmap_set() and bitmap_clear(). Unlike loops calling set_bit() and clear_bit(), bitmap_set() and bitmap_clear() are not atomic. But this is ok. Because the bitmap operations are protected by bitmap->lock except for initialization of the bitmap in mlx4_bitmap_init(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-27slip: Use net_device_stats from struct net_deviceTobias Klauser
Use net_device->stats for stats instead of private variable copies in struct slip. Use ndo_get_stat64 so the additions can be performed on a private destination buffer. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-27mac80211_hwsim: support runtime iftype changesJohannes Berg
Add the trivial support for runtime interface type changes to mac80211_hwsim for testing. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27ath9k_htc: Enable ANI in associated state onlyRajkumar Manoharan
While scanning, ANI is triggered unnecessarily where sta is in unassociated state. And cancelling ani work in ath9k_htc_stop is not required. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27wl12xx: remove unneeded lockingJohannes Berg
With the scan callback now being callable from any context, these unlocks/locks can go away. This makes the code easier to understand, since callers of these functions must no longer be aware that the mutex may be dropped. As Stanislaw is working on iwlwifi scanning, I didn't change it to take advantage of the new mac80211 semantics. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27ath9k: Change the default LED pattern.Vivek Natarajan
All major Atheros customers require the led to be in continuous ON state rather than the blinking pattern. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27ath5k: fix off-by-one in pilot magnitude maskBob Copeland
If the symbol offset is 46, it will be counted in both the third and fourth bytes of the mask, and in this case the shift will be negative which can pollute high order bits in the mask. This may negatively impact OFDM symbol detection. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27ath5k: re-order one of the frees on unwindDan Carpenter
There was a small misordering here. In the original code, if we were to go to err_free_ah then it wouldn't free the irq. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-27iwlwifi: allow using multiple contextsJohannes Berg
We're now ready to start using multiple contexts. We do this by keeping track of the valid interface types per context (exclusive [ibss] and normal) and checking which context is "free" when a new interface is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: follow main beacon intervalJohannes Berg
It is necessary that the PAN context always use the same beacon interval as the BSS context unless it is in dual-station mode, ie. the PAN context is a station as well, so implement that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlagn: always send RXON timingJohannes Berg
The PAN context requires also getting RXON timing when we send an unassociated RXON in some cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: pass context to iwl_send_rxon_timingJohannes Berg
Sometimes we need to send RXON timing even when we don't have a virtual interface yet, so pass the context and allow passing one without a virtual interface pointer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: send PAN parametersJohannes Berg
In order for the microcode to be able to handle multiple interfaces, we need to give it the PAN parameters that state how to allocate the time between the two interfaces. Do this, and update it wherever necessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlagn: send beacon before committing associated RXONJohannes Berg
Newer AGN microcode requires know the beacon before starting the AP so that it can start beaconing right away. Implement that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlagn: send RXON timing before associatingJohannes Berg
The PAN functionality requires us to send the timing including a valid DTIM period to the microcode before associating, so request this data from mac80211 and send it to the device. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlagn: queue frames according to contextJohannes Berg
Frames for different contexts need to be put on different queues, and multicast after DTIM frames have a special queue yet which also depends on the context, so put all this into the context. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlagn: remove iw_mode check for beaconJohannes Berg
Since we have the beacon context now, we no longer need to rely on iw_mode but can check the beacon context interface's type. However, that check must be in the work item instead due to locking constraints (mutex must be held when dereferencing beacon_ctx pointer). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlagn: detect PAN capabilityJohannes Berg
Detect whether or not the ucode is PAN capable and adjust the valid contexts accordingly. To be able to do this, add the PAN context to the array as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: add PAN APIJohannes Berg
Define the new host commands and notifications REPLY_WIPAN_PARAMS REPLY_WIPAN_RXON REPLY_WIPAN_RXON_TIMING REPLY_WIPAN_RXON_ASSOC REPLY_WIPAN_QOS_PARAM REPLY_WIPAN_WEPKEY REPLY_WIPAN_P2P_CHANNEL_SWITCH REPLY_WIPAN_NOA_NOTIFICATION and their corresponding structures along with the PAN station flag, the PAN AP sta ID and new dev types for the second context. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: introduce beacon contextJohannes Berg
Only one context can be beaconing at a time, but we need to track which one. Introduce a new variable priv->beacon_ctx to do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: move HT configuration data into contextJohannes Berg
A lot of HT configuration semantically belongs into the context, even if right now it will never be different between contexts. Move it so we're better prepared for future changes in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: add context pointer to stationJohannes Berg
Sometimes we only pass around station pointers but need to find the context they belong to, so store it in there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: store default station flags in contextJohannes Berg
Since the default context is initialised to zero, and the default flags are zero, no more code is needed to initialise them right now, but another context can have different default flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: make hw crypto context awareJohannes Berg
HW crypto needs to be aware of the context, and there are different command IDs for the WEP keys per context, so move the key tracking variables and command IDs into the context structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: move AP sta ID to contextJohannes Berg
Each context needs to use a different AP sta ID, so we need to move that into the context struct instead of hardcoding it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: clamp scanning dwell time to all contextsJohannes Berg
The dwell time should at least fit into all context's beacon intervals. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: move virtual interface pointer into contextJohannes Berg
iwlwifi occasionally needs to find the virtual interface pointer to give it to mac80211, but right now it only keeps one. Move it into the context so that we can keep one pointer each. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: add context into tx descriptorJohannes Berg
In status processing we'll need to find the context for a given frame, so add a context pointer to the TX info for each frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: move QoS into contextJohannes Berg
Since mac80211 doesn't currently enable/disable QoS per interface, we can't yet do it properly, but we can already prepare for it and move the QoS data and command ID into the context struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: contextify command sendingJohannes Berg
Some commands will have different command IDs for different contexts, so we need to store those IDs in the context structure and use them instead of hardcoding the commands. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: contextify-stations-completelyJohannes Berg
The microcode tracks stations per context, so the driver needs to do that as well for adding, deleting and restoring them, especially in the implicit removal case when we send an RXON. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: contextify broadcast stationJohannes Berg
The broadcast station ID is per context, so add a variable for the ID in the context and use it everywhere we previously hardcoded it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: define PAN queues/FIFOsJohannes Berg
PAN capable microcode has a different queue assignment (not just more queues for PAN) due to the way multicast is handled for AP mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: prepare for PAN queue/fifo assignmentJohannes Berg
PAN ucode will require a different queue assignment, in particular queue 9 instead of 4 should be used for commands. This is required because the ucode will stop/start queues 4 and 8 depending on the PAN state, since queue 8 will be used for PAN multicast (after DTIM). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: initial contextificationJohannes Berg
In order to support multiple interfaces, we must move a lot of data into per-context structures so we can use the contexts the device offers. To start with, this makes a lot of code context-aware, more changes will move more things into the context structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-26bnx2x: fix wrong return from bnx2x_trylock_hw_lockEric Dumazet
bnx2x_trylock_hw_lock() returns a bool : true if succeeded to acquire the lock. false in case of error. -EINVAL is not an acceptable value, since its promoted to true. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-26stmmac: Make time functionality depend upon RTC_HCTOSYS_DEVICEDavid S. Miller
Based upon a report by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-26qlcnic: PCI ID additionSritej Velaga
Added PCI ID to board info. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-26qlcnic: Fix driver load issue in FW hangAnirban Chakraborty
If there is a FW hang when the driver loads, it can not determine the FW operational mode. Fix it by checking the FW state first before issuing any FW commands to determine its capabilities and thereby detecting driver operational mode. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-26qlcnic: Fix missing error codesSony Chacko
In the original code, the error codes returned from some of the functions are not caught and sent up the caller chain. Fixed it here. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25bna: Fixed build break for allyesconfigRasesh Mody
This is the patch to fix the build break caused by multiple definitions of symbols between Brocade's FC/FCOE driver(BFA) and 10G Networking Driver(BNA). Changes are: 1. locally used functions are made static 2. unused functions are removed 3. using unique namespaces for the function names that must be globally visible Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25r6040: Free irq line on error pathDenis Kirjanov
Free irq line on error path. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25s2io: remove lro parameterAmerigo Wang
Remove "lro" parameter of s2io driver. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: jon.mason@exar.com Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25be2net: stats for packets received due to internal switching in ASIC.Ajit Khaparde
Counters for packets received due to internal switching are already available. This change will start displaying them in ethtool -S Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25be2net: fix to dynamically generate MAC Address for VFsAjit Khaparde
The BE ASIC/firmware doesnot reserve and assign MAC address for VFs. This results in the VF interfaces being created with MAC Address 0. The code change proposed takes the MAC address of PF to generate a seed. MAC Address for VFs are assigned incrementally starting from the seed. These addresses are programmed in the ASIC by the PF and the VF driver queries for the MAC address during its probe. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25qlge: Fix a deadlock when the interface is going downBreno Leitao
Currently qlge can deadlock when the interface is going down, and the mpi_port_cfg_work() is executing on another processor. It happens because unregister_netdev() holds the rtnl lock, and the mpi_port_cfg_work() also request this lock. Since unregiter_netdev() may wait mpi_port_cfg_work(), who also request the holding lock, it can cause an deadlock, displaying the following error: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. rmmod D 00000080c6c1d190 0 3993 2081 0x00008080 Call Trace: [c000000975f56ee0] [c0000000000152a0] .__switch_to+0x100/0x1d0 [c000000975f56f70] [c0000000005781b4] .schedule+0x3a4/0x8c0 [c000000975f570c0] [c000000000578e8c] .schedule_timeout+0x24c/0x350 [c000000975f571e0] [c000000000578a88] .wait_for_common+0x198/0x210 [c000000975f572c0] [c0000000000abbb4] .__cancel_work_timer+0x2c4/0x2e0 [c000000975f57400] [d0000000078e7a20] .ql_adapter_down+0x80/0x260 [qlge] [c000000975f574b0] [d0000000078e7d80] .qlge_close+0x70/0x130 [qlge] [c000000975f57540] [c000000000497ef8] .__dev_close+0x98/0xf0 [c000000975f575d0] [c000000000497f74] .dev_close+0x24/0x60 [c000000975f57650] [c000000000498080] .rollback_registered_many+0xd0/0x2b0 [c000000975f576f0] [c000000000498338] .rollback_registered+0x38/0x50 [c000000975f57780] [c0000000004983d8] .unregister_netdevice_queue+0x88/0xe0 [c000000975f57810] [c000000000498574] .unregister_netdev+0x24/0x40 [c000000975f57890] [d0000000078f6f38] .qlge_remove+0x3c/0x78 [qlge] [c000000975f57920] [c0000000002d9298] .pci_device_remove+0x48/0x90 [c000000975f579a0] [c000000000372850] .__device_release_driver+0xa0/0x130 [c000000975f57a30] [c000000000372a08] .driver_detach+0x128/0x150 [c000000975f57ad0] [c000000000371134] .bus_remove_driver+0xc4/0x1a0 [c000000975f57b70] [c00000000037357c] .driver_unregister+0x8c/0xd0 [c000000975f57c00] [c0000000002d968c] .pci_unregister_driver+0x5c/0x110 [c000000975f57ca0] [d0000000078f6ee4] .qlge_exit+0x1c/0x34 [qlge] Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25drivers/net/irda: Eliminate memory leakJulia Lawall
dev_alloc_skb allocates some memory, so that memory should be freed before leaving the function in an error case. Corrected some typos in a nearby comment as well. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E; identifier f1; iterator I; @@ x = dev_alloc_skb(...); <... when != x when != true (x == NULL || ...) when != if (...) { <+...x...+> } when != I (...) { <+...x...+> } ( x == NULL | x == E | x->f1 ) ...> * return ...; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25typhoon: fix a race in typhoon_do_get_statsEric Dumazet
Its important to store 'final' values in counters, not using them as temporary variables, or this might break some SNMP applications. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25plip: remove superflous returnDan Carpenter
This return isn't reachable and it obscures the goto on the line before. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25stmmac: make ioaddr 'void __iomem *' rather than unsigned longGiuseppe CAVALLARO
This avoids unnecessary casting and adds the ioaddr in the private structure. This patch also removes many warning when compile the driver. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-15 11:20:24 +0000