summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2014-05-14i2c: designware: Mask all interrupts during i2c controller enableDu, Wenkai
There have been "i2c_designware 80860F41:00: controller timed out" errors on a number of Baytrail platforms. The issue is caused by incorrect value in Interrupt Mask Register (DW_IC_INTR_MASK) when i2c core is being enabled. This causes call to __i2c_dw_enable() to immediately start the transfer which leads to timeout. There are 3 failure modes observed: 1. Failure in S0 to S3 resume path The default value after reset for DW_IC_INTR_MASK is 0x8ff. When we start the first transaction after resuming from system sleep, TX_EMPTY interrupt is already unmasked because of the hardware default. 2. Failure in normal operational path This failure happens rarely and is hard to reproduce. Debug trace showed that DW_IC_INTR_MASK had value of 0x254 when failure occurred, which meant TX_EMPTY was unmasked. 3. Failure in S3 to S0 suspend path This failure also happens rarely and is hard to reproduce. Adding debug trace that read DW_IC_INTR_MASK made this failure not reproducible. But from ISR call trace we could conclude TX_EMPTY was unmasked when problem occurred. The patch masks all interrupts before the controller is enabled to resolve the faulty DW_IC_INTR_MASK conditions. Signed-off-by: Wenkai Du <wenkai.du@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> [wsa: improved the comment and removed typo in commit msg] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2014-05-14of: make of_update_property() usable earlier in the boot processThomas Petazzoni
Commit 75b57ecf9d1d1e17d099ab13b8f48e6e038676be ('of: Make device nodes kobjects so they show up in sysfs') has turned Device Tree nodes in kobjects and added a sysfs based representation for Device Tree nodes. Since the sysfs logic is only available after the execution of a core_initcall(), the patch took precautions in of_add_property() and of_remove_property() to not do any sysfs related manipulation early in the boot process. However, it forgot to do the same for of_update_property(), which if used early in the boot process (before core_initcalls have been called), tries to call sysfs_remove_bin_file(), and crashes: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at /home/thomas/projets/linux-2.6/fs/kernfs/dir.c:1216 kernfs_remove_by_name_ns+0x80/0x88() kernfs: can not remove '(null)', no directory Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc1-00127-g1d7e7b2-dirty #423 [<c0014910>] (unwind_backtrace) from [<c00110ec>] (show_stack+0x10/0x14) [<c00110ec>] (show_stack) from [<c04c84b8>] (dump_stack+0x84/0x94) [<c04c84b8>] (dump_stack) from [<c001d8c0>] (warn_slowpath_common+0x6c/0x88) [<c001d8c0>] (warn_slowpath_common) from [<c001d90c>] (warn_slowpath_fmt+0x30/0x40) [<c001d90c>] (warn_slowpath_fmt) from [<c0104468>] (kernfs_remove_by_name_ns+0x80/0x88) [<c0104468>] (kernfs_remove_by_name_ns) from [<c0394d98>] (of_update_property+0xc0/0xf0) [<c0394d98>] (of_update_property) from [<c0647248>] (mvebu_timer_and_clk_init+0xfc/0x194) [<c0647248>] (mvebu_timer_and_clk_init) from [<c0640934>] (start_kernel+0x218/0x350) [<c0640934>] (start_kernel) from [<00008070>] (0x8070) ---[ end trace 3406ff24bd97382e ]--- Unable to handle kernel NULL pointer dereference at virtual address 0000003c pgd = c0004000 [0000003c] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.15.0-rc1-00127-g1d7e7b2-dirty #423 task: c10ad4d8 ti: c10a2000 task.ti: c10a2000 PC is at kernfs_find_ns+0x8/0xf0 LR is at kernfs_find_and_get_ns+0x30/0x48 pc : [<c0103834>] lr : [<c010394c>] psr: 600001d3 sp : c10a3f34 ip : 00000073 fp : 00000000 r10: 00000000 r9 : cfffc240 r8 : cfdf2980 r7 : cf812c00 r6 : 00000000 r5 : 00000000 r4 : c10b45e0 r3 : c10ad4d8 r2 : 00000000 r1 : cf812c00 r0 : 00000000 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000404a DAC: 00000015 Process swapper/0 (pid: 0, stack limit = 0xc10a2240) Stack: (0xc10a3f34 to 0xc10a4000) 3f20: c10b45e0 00000000 00000000 3f40: cf812c00 c010394c 00000063 cf812c00 00000001 cf812c00 cfdf29ac c03932cc 3f60: 00000063 cf812bc0 cfdf29ac cf812c00 ffffffff c03943f8 cfdf2980 c0104468 3f80: cfdf2a04 cfdf2980 cf812bc0 c06634b0 c10aa3c0 c0394da4 c10f74dc cfdf2980 3fa0: cf812bc0 c0647248 c10aa3c0 ffffffff c10de940 c10aa3c0 ffffffff c0640934 3fc0: ffffffff ffffffff c06404ec 00000000 00000000 c06634b0 00000000 10c53c7d 3fe0: c10aa434 c06634ac c10ae4c8 0000406a 414fc091 00008070 00000000 00000000 [<c0103834>] (kernfs_find_ns) from [<00000001>] (0x1) Code: e5c89001 eaffffcf e92d40f0 e1a06002 (e1d023bc) ---[ end trace 3406ff24bd97382f ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task! To fix this problem, we simply skip the sysfs related calls in of_update_property(), and rely on of_init() to fix up things when it will be called, exactly as is done in of_add_property() and of_remove_property(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 75b57ecf9d1d ("of: Make device nodes kobjects so they show up in sysfs") Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-05-13[media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility modeGuennadi Liakhovetski
If a struct contains 64-bit fields, it is aligned on 64-bit boundaries within containing structs in 64-bit compilations. This is the case with struct v4l2_window, which contains pointers and is embedded into struct v4l2_format, and that one is embedded into struct v4l2_create_buffers. Unlike some other structs, used as a part of the kernel ABI as ioctl() arguments, that are packed, these structs aren't packed. This isn't a problem per se, but the ioctl-compat code for VIDIOC_CREATE_BUFS contains a bug, that triggers in such 64-bit builds. That code wrongly assumes, that in struct v4l2_create_buffers, struct v4l2_format immediately follows the __u32 memory field, which in fact isn't the case. This bug wasn't visible until now, because until recently hardly any applications used this ioctl() and mostly embedded 32-bit only drivers implemented it. This is changing now with addition of this ioctl() to some USB drivers, e.g. UVC. This patch fixes the bug by copying parts of struct v4l2_create_buffers separately. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2014-05-13[media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from ↵Guennadi Liakhovetski
user-space Commit 75e2bdad8901a0b599e01a96229be922eef1e488 "ov7670: allow configuration of image size, clock speed, and I/O method" uses a wrong index to iterate an array. Apart from being wrong, it also uses an unchecked value from user-space, which can cause access to unmapped memory in the kernel, triggered by a normal desktop user with rights to use V4L2 devices. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Jonathan Corbet <corbet@lwn.net> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13Merge remote-tracking branches 'spi/fix/pxa2xx' and 'spi/fix/qup' into spi-linusMark Brown
2014-05-13Merge remote-tracking branch 'spi/fix/core' into spi-linusMark Brown
2014-05-13intel_pstate: remove setting P state to MAX on initDirk Brandewie
Setting the P state of the core to max at init time is a hold over from early implementation of intel_pstate where intel_pstate disabled cpufreq and loaded VERY early in the boot sequence. This was to ensure that intel_pstate did not affect boot time. This in not needed now that intel_pstate is a cpufreq driver. Removing this covers the case where a CPU has gone through a manual CPU offline/online cycle and the P state is set to MAX on init and the CPU immediately goes idle. Due to HW coordination the P state request on the idle CPU will drag all cores to MAX P state until the load is reevaluated when to core goes non-idle. Reported-by: Patrick Marlier <patrick.marlier@gmail.com> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-13ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses.Lv Zheng
We need to find a smarter way to switch to 64-bit FADT addresses according to the bug report. This patch reverts Linux to the original behavior. Fixes: 0249ed2444d6 (ACPICA: Add option to favor 32-bit FADT addresses.) References: https://bugzilla.kernel.org/show_bug.cgi?id=74021 Reported-and-tested-by: Oswald Buddenhagen <ossi@kde.org> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-13ACPI / video: correct DMI tag for Dell Inspiron 7520Aaron Lu
The DMI tag used to identify Dell Inspiron 7520 should be product name instead of product version. Fixes: 0e9f81d3b7cd (ACPI / video: Add systems that should favour native backlight interface) Reported-and-tested-by: Téo Mazars <teomazars@gmail.com> References: https://bugzilla.redhat.com/show_bug.cgi?id=909552 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-13Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix resource leak as well as broken store function in emc1403 driver, and add support for additional chip revisions" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (emc1403) Support full range of known chip revision numbers hwmon: (emc1403) Fix resource leak on module unload hwmon: (emc1403) fix inverted store_hyst()
2014-05-13Merge tag 'stable/for-linus-3.15-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - Fix arm64 crash on boot. - Quiet a noisy arm build warning (virt_to_pfn() redefined). * tag 'stable/for-linus-3.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm64: introduce virt_to_pfn xen/events/fifo: correctly align bitops arm/xen: Remove definiition of virt_to_pfn in asm/xen/page.h
2014-05-13Merge tag 'md/3.15-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md bugfixes from Neil Brown: "Two bugfixes for md in 3.15 Both tagged for -stable" * tag 'md/3.15-fixes' of git://neil.brown.name/md: md: avoid possible spinning md thread at shutdown. md/raid10: call wait_barrier() for each request submitted.
2014-05-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Seems like we've had more fixes than usual this release cycle, but there's nothing in particular that we're doing differently. Perhaps it's just one of those cycles where more people are finding more regressions (and/or that the latency of when people actually test what's been in the tree for a while is catching up so that we get the bug reports now). The bigger changes here are are for TI and Marvell platforms: * Timing changes for GPMC (generic localbus) on OMAP causing some largeish DTS deltas. * Fixes to window allocation on PCI for mvebu touching drivers/ stuff. Patches have acks from subsystem maintainers where needed. * A fix from Thomas for a botched DT conversion in drivers/edma. There's a handful of other fixes for the above platforms as well as sunxi, at91, i.MX. I also included a MAINTAINER update for Broadcom, and a trivial move of a binding doc. I know you said you'd be offline this week, but I might as well post it for when you return. :)" I'm not quite offline yet. Doing a few pulls in the last hour before my internet goes away.. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) MAINTAINERS: update Broadcom ARM tree location and add an SoC family ARM: dts: i.MX53: Fix ipu register space size ARM: dts: kirkwood: fix mislocated pcie-controller nodes ARM: sunxi: Enable GMAC in sunxi_defconfig ARM: common: edma: Fix xbar mapping ARM: sun7i: Fix i2c4 base address ARM: Kirkwood: T5325: Fix double probe of Codec ARM: mvebu: enable the SATA interface on Armada 375 DB ARM: mvebu: specify I2C bus frequency on Armada 370 DB ARM: mvebu: use qsgmii phy-mode for Armada XP GP interfaces ARM: mvebu: fix NOR bus-width in Armada XP OpenBlocks AX3 Device Tree ARM: mvebu: fix NOR bus-width in Armada XP DB Device Tree ARM: mvebu: fix NOR bus-width in Armada XP GP Device Tree ARM: dts: AM3517: Disable absent IPs inherited from OMAP3 ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox ARM: dts: OMAP5: Add mailbox dt node to fix boot warning ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU ARM: dts: am437x-gp-evm: Do not reset gpio5 ARM: dts: omap3-igep0020: use SMSC9221 timings PCI: mvebu: split PCIe BARs into multiple MBus windows when needed ...
2014-05-12clk: shmobile: clk-mstp: change to using clock-indicesBen Dooks
With the addition of clock-indices, we need to change the renesas clock implementation to use these instead of the local definition of "renesas,clock-indices". Since this will break booting with older device trees, we add a simple auto-detection of which properties are present. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-13MIPS/loongson2_cpufreq: Fix CPU clock rate settingAaro Koskinen
Loongson2 has been using (incorrectly) kHz for cpu_clk rate. This has been unnoticed, as loongson2_cpufreq was the only place where the rate was set/get. After commit 652ed95d5fa6074b3c4ea245deb0691f1acb6656 (cpufreq: introduce cpufreq_generic_get() routine) things however broke, and now loops_per_jiffy adjustments are incorrect (1000 times too long). The patch fixes this by changing cpu_clk rate to Hz. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: cpufreq@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: https://patchwork.linux-mips.org/patch/6678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-12spi/pxa2xx: Prevent DMA from transferring too many bytesMika Westerberg
In case we are doing DMA transfer and the size of the buffer is not multiple of 4 bytes the driver truncates that to 4-byte boundary and tries to handle remaining bytes using PIO. Or that is what it tried to do. What actually happens is that it calls ALIGN() to the buffer size which aligns it to the next 4-byte boundary (doesn't truncate). Doing this results 1-3 bytes extra to be transferred. Furthermore we handle remaining bytes using PIO which results one extra byte to be transferred. In worst case the driver transfers 4 extra bytes. While investigating this it turned out that the DMA hardware doesn't even have such limitation so we can solve this by dropping the code that tries to handle unaligned bytes. Reported-by: Chiau Ee Chew <chiau.ee.chew@intel.com> Reported-by: Hock Leong Kweh <hock.leong.kweh@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12hwmon: (emc1403) Support full range of known chip revision numbersJosef Gajdusek
The datasheet for EMC1413/EMC1414, which is fully compatible to EMC1403/1404 and uses the same chip identification, references revision numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers from 0x01 to 0x04 to make sure none are missed. Signed-off-by: Josef Gajdusek <atx@atx.name> Cc: stable@vger.kernel.org [Guenter Roeck: Updated headline and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-12hwmon: (emc1403) Fix resource leak on module unloadJean Delvare
Commit 454aee17f claims to convert driver emc1403 to use devm_hwmon_device_register_with_groups, however the patch itself makes use of hwmon_device_register_with_groups instead. As the driver remove function was still dropped, the hwmon device is no longer unregistered on driver removal, leading to a resource leak. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 454aee17f hwmon: (emc1403) Convert to use devm_hwmon_device_register_with_groups Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org [3.13+] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-12hwmon: (emc1403) fix inverted store_hyst()Josef Gajdusek
Attempts to set the hysteresis value to a temperature below the target limit fails with "write error: Numerical result out of range" due to an inverted comparison. Signed-off-by: Josef Gajdusek <atx@atx.name> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org [Guenter Roeck: Updated headline and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-12intel_pstate: Set turbo VID for BayTrailDirk Brandewie
A documentation update exposed that there is a separate set of VID values that must be used in the turbo/boost P state range. Add enumerating and setting the correct VID for P states in the turbo range. Cc: v3.13+ <stable@vger.kernel.org> # v3.13+ Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-12ACPI / TPM: Fix resume regression on ChromebooksRafael J. Wysocki
Chromebooks (at least Acer C720 and Pixel) implement an ACPI object for TPM, but don't implement the _DSM method to support PPI. As a result, the TPM driver fails to load on those machines after commit 1569a4c4ceba (ACPI / TPM: detect PPI features by checking availability of _DSM functions) which causes them to fail to resume from system suspend, becuase they require the TPM hardware to be put into the right state during resume and the TPM driver is necessary for that. Fix the problem by making tpm_add_ppi() return 0 when tpm_ppi_handle is still NULL after walking the ACPI namespace in search for the PPI _DSM, which allows the TPM driver to load and operate the hardware (during system resume in particular), but avoid creating the PPI sysfs group in that case. This change is based on a prototype patch from Jiang Liu. Fixes: 1569a4c4ceba (ACPI / TPM: detect PPI features by checking availability of _DSM functions) References: https://bugzilla.kernel.org/show_bug.cgi?id=74021 Reported-by: James Duley <jagduley@gmail.com> Reported-by: Phillip Dixon <phil@dixon.gen.nz> Tested-by: Brandon Casey <drafnel@gmail.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-11Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "4 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, thp: close race between mremap() and split_huge_page() mm: postpone the disabling of kmemleak early logging MAINTAINERS: update maintainership of LTP drivers/rtc/rtc-hym8563.c: set uie_unsupported
2014-05-11drivers/rtc/rtc-hym8563.c: set uie_unsupportedHeiko Stuebner
The alarm of the hym8563 only supports a minute accuracy, while the uie wants an alarm one second in the future. Therefore things like the select() syscall will fail with a timeout, because the next alarm will happen in a worst case of 60 seconds. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-10ACPI / proc: Do not say when /proc interfaces will be deleted in KconfigRafael J. Wysocki
Do not tell people in the Kconfig help when exactly we are going to remove the deprecated ACPI interfaces in /proc, because, honestly, we don't know. We will remove them when they are not used any more. In particular, do not tell them that the interfaces will be removed in a kernel release that already happened long ago. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-09Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A somewhat unpleasantly large collection of small fixes. The big ones are the __visible tree sweep and a fix for 'earlyprintk=efi,keep'. It was using __init functions with predictably suboptimal results. Another key fix is a build fix which would produce output that simply would not decompress correctly in some configuration, due to the existing Makefiles picking up an unfortunate local label and mistaking it for the global symbol _end. Additional fixes include the handling of 64-bit numbers when setting the vdso data page (a latent bug which became manifest when i386 started exporting a vdso with time functions), a fix to the new MSR manipulation accessors which would cause features to not get properly unblocked, a build fix for 32-bit userland, and a few new platform quirks" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall() x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro x86: Fix typo preventing msr_set/clear_bit from having an effect x86/intel: Add quirk to disable HPET for the Baytrail platform x86/hpet: Make boot_hpet_disable extern x86-64, build: Fix stack protector Makefile breakage with 32-bit userland x86/reboot: Add reboot quirk for Certec BPC600 asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/* asmlinkage, x86: Add explicit __visible to arch/x86/* asmlinkage: Revert "lto: Make asmlinkage __visible" x86, build: Don't get confused by local symbols x86/efi: earlyprintk=efi,keep fix
2014-05-09drm/i915/vlv: reset VLV media force wake request registerJani Nikula
Media force wake get hangs the machine when the system is booted without displays attached. The assumption is that (at least some versions of) the firmware has skipped some initialization in that case. Empirical evidence suggests we need to reset the media force wake request register in addition to the render one to avoid hangs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75895 Reported-by: Imre Deak <imre.deak@intel.com> Reported-by: Darren Hart <dvhart@linux.intel.com> Tested-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-09gpio: mcp23s08: Bug fix of SPI device tree registration.Michael Welling
The chips variable needs to be incremented for each chip that is found in the spi_present_mask when registering via device tree. Without this and the checking a negative index is passed to the data->chip array in a subsequent loop. Cc: stable@vger.kernel.org Signed-off-by: Michael Welling <mwelling@ieee.org> Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09gpio: ich: set regs and reglen for i3100 and ich6 chipsetVincent Donnefort
This patch fixes kernel NULL pointer BUG introduced by the following commit: b667cf488aa9476b0ab64acd91f2a96f188cfd21 gpio: ich: Add support for multiple register addresses. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Tested-by: Eric Paris <eparis@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just a few fixups to various drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - fix touchpad initialization on Gigabyte U2442 Input: tca8418 - fix loading this driver as a module from a device tree Input: bma150 - extend chip detection for bma180 Input: atkbd - fix keyboard not working on some LG laptops Input: synaptics - add min/max quirk for ThinkPad Edge E431
2014-05-08Merge tag 'mfd-mmc-fixes-3.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mmc/rtsx revert from Lee Jones. * tag 'mfd-mmc-fixes-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"
2014-05-08ata: pata_at91 only works on sam9Arnd Bergmann
The smc driver used by pata_at91 is at91sam9 specific, so building this driver on another at91 platform results in this error: ERROR: "sam9_smc_configure" [drivers/ata/pata_at91.ko] undefined! ERROR: "sam9_smc_write_mode" [drivers/ata/pata_at91.ko] undefined! ERROR: "sam9_smc_read_mode" [drivers/ata/pata_at91.ko] undefined! This patch changes the Kconfig dependency to ensure it always works. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: linux-ide@vger.kernel.org Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-08ACPI / processor: do not mark present at boot but not onlined CPU as onlinedIgor Mammedov
acpi_processor_add() assumes that present at boot CPUs are always onlined, it is not so if a CPU failed to become onlined. As result acpi_processor_add() will mark such CPU device as onlined in sysfs and following attempts to online/offline it using /sys/device/system/cpu/cpuX/online attribute will fail. Do not poke into device internals in acpi_processor_add() and touch "struct device { .offline }" attribute, since for CPUs onlined at boot it's set by: topology_init() -> arch_register_cpu() -> register_cpu() before ACPI device tree is parsed, and for hotplugged CPUs it's set when userspace onlines CPU via sysfs. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-08mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"Micky Ching
This reverts commit c42deffd5b53c9e583d83c7964854ede2f12410d. commit <mmc: rtsx: add support for pre_req and post_req> did use mutex_unlock() in tasklet, but mutex_unlock() can't be used in tasklet(atomic context). The driver needs to use mutex to avoid concurrency, so we can't use tasklet here, the patch need to be removed. The spinlock host->lock and pcr->lock may deadlock, one way to solve the deadlock is remove host->lock in sd_isr_done_transfer(), but if using workqueue the we can avoid using the spinlock and also avoid the problem. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-05-07Merge tag 'for-linus-20140507' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fix from Brian Norris: "A single update for Keystone SoC's, whose NAND controller does not support subpage programming" * tag 'for-linus-20140507' of git://git.infradead.org/linux-mtd: mtd: davinci-nand: disable subpage write for keystone-nand
2014-05-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix a small bug in computation of report size, which might cause some devices (Atmel touchpad found on the Samsung Ativ 9) to reject reports with otherwise valid contents - a few device-ID specific quirks/additions piggy-backing on top of it * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad Yogas HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S HID: core: fix computation of the report size HID: multitouch: add support of EliteGroup 05D8 panels
2014-05-07Merge branch 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull radeon mullins support from Dave Airlie: "This is support for the new AMD mullins APU, it pretty much just adds support to the driver in the all the right places, and is pretty low risk wrt other GPUs" Oh well. I guess it ends up fitting under "support new hardware" for merging late. * 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linux: drm/radeon: add pci ids for Mullins drm/radeon: add Mullins VCE support drm/radeon: modesetting updates for Mullins. drm/radeon: dpm updates for KV/KB drm/radeon: add Mullins dpm support. drm/radeon: add Mullins UVD support. drm/radeon: update cik init for Mullins. drm/radeon: add Mullins chip family
2014-05-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "radeon, i915 and nouveau fixes, all fixes for regressions or black screens, or possible oopses" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: lower the ref * post PLL maximum drm/radeon: check that we have a clock before PLL setup drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path drm/radeon: Fix num_banks calculation for SI agp: info leak in agpioc_info_wrap() drm/gm107/gr: bump attrib cb size quite a bit drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip drm/nouveau/bios: fix shadowing from PROM on big-endian systems drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi drm/radeon/dp: check for errors in dpcd reads drm/radeon: avoid high jitter with small frac divs drm/radeon: check buffer relocation offset drm/radeon: use pflip irq on R600+ v2 drm/radeon/uvd: use lower clocks on old UVD to boot v2 drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX drm/i915: Sanitize the enable_ppgtt module option once drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()
2014-05-08ACPI: Revert "ACPI / AC: convert ACPI ac driver to platform bus"Guenter Roeck
Revert commit cc8ef5270734 (ACPI / AC: convert ACPI ac driver to platform bus) that is reported to break thermal management on MacBook Air 2013 with ArchLinux. Fixes: cc8ef5270734 (ACPI / AC: convert ACPI ac driver to platform bus) References: https://bugzilla.kernel.org/show_bug.cgi?id=71711 Cc: Zhang Rui <rui.zhang@intel.com> Reported-and-tested-by: Manuel Krause <manuelkrause@netscape.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: 3.13+ <stable@vger.kernel.org> # 3.13+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-08ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PXHans de Goede
Without this this EEE PC exports a non working WMI interface, with this it exports a working "good old" eeepc_laptop interface, fixing brightness control not working as well as rfkill being stuck in a permanent wireless blocked state. This is not an ideal way to fix this, but various attempts to fix this otherwise have failed, see: References: https://bugzilla.redhat.com/show_bug.cgi?id=1067181 Reported-and-tested-by: lou.cardone@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-08ACPI: blacklist win8 OSI for Dell Inspiron 7737Edward Lin
With win8 capabiltiy, the machine will boot itself immediately after shutdown command has executed. Work around this issue by disabling win8 capcability. This workaround also makes wireless hotkey work. Signed-off-by: Edward Lin <yidi.lin@canonical.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-07libata: clean up ZPODD when a port is detachedLevente Kurusa
When a ZPODD device is unbound via sysfs, the ACPI notify handler is not removed. This causes panics as observed in Bug #74601. The panic only happens when the wake happens from outside the kernel (i.e. inserting a media or pressing a button). Add a loop to ata_port_detach which loops through the port's devices and checks if zpodd is enabled, if so call zpodd_exit. Cc: stable@vger.kernel.org Reviewed-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Levente Kurusa <levex@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-07drm/i915/SDVO: For sysfs link put directory and target in correct orderEgbert Eich
When linking the i2c sysfs file into the connector's directory pass directory and link target in the right order. This code was introduced with: commit 931c1c26983b4f84e33b78579fc8d57e4a14c6b4 Author: Imre Deak <imre.deak@intel.com> Date: Tue Feb 11 17:12:51 2014 +0200 drm/i915: sdvo: add i2c sysfs symlink to the connector's directory This is the same what we do for DP connectors, so make things more consistent. Signed-off-by: Egbert Eich <eich@suse.de> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-07drm/i915: use lane count and link rate from VBT as minimums for eDPJani Nikula
Most likely the minimums for both should be enough for enabling the native resolution on the eDP, and we'll end up using the predetermined optimal link config for the panel. v2: Add debug prints. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73539 Tested-by: Markus Blank-Burian <burian@muenster.de> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-07drm/i915: clean up VBT eDP link param decodingJani Nikula
Use defines, do not set anything if VBT has values unknown to us. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-07drm/i915: consider the source max DP lane count tooPaulo Zanoni
Even if the panel claims it can support 4 lanes, there's the possibility that the HW can't, so consider this while selecting the max lane count. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-07Merge branch 'mullins' of git://people.freedesktop.org/~deathsimple/linux ↵Dave Airlie
into drm-fixes Add Mullins chips support. * 'mullins' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: add pci ids for Mullins drm/radeon: add Mullins VCE support drm/radeon: modesetting updates for Mullins. drm/radeon: dpm updates for KV/KB drm/radeon: add Mullins dpm support. drm/radeon: add Mullins UVD support. drm/radeon: update cik init for Mullins. drm/radeon: add Mullins chip family
2014-05-07Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes nouveau fixes. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/gm107/gr: bump attrib cb size quite a bit drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip drm/nouveau/bios: fix shadowing from PROM on big-endian systems drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi
2014-05-07Merge tag 'topc/core-stuff-2014-05-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Some more i915 fixes. There's still some DP issues we are looking into, but wanted to get these moving. * tag 'topc/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel: drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX drm/i915: Sanitize the enable_ppgtt module option once drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()
2014-05-07Merge branch 'drm-fixes-3.15' of ↵Dave Airlie
git://people.freedesktop.org/~deathsimple/linux into drm-fixes this is the next pull quested for stashed up radeon fixes for 3.15. As discussed support for Mullins was separated out and will get it's own pull request. Remaining highlights are: 1. Some more patches to better handle PLL limits. 2. Making use of the PFLIP additional to the VBLANK interrupt, otherwise we sometimes miss page flip events. 3. Fix for the UVD command stream parser. 4. Fix for bootup UVD clocks on RV7xx systems. 5. Adding missing error check on dpcd reads. 6. Fixes number of banks calculation on SI. * 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: lower the ref * post PLL maximum drm/radeon: check that we have a clock before PLL setup drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path drm/radeon: Fix num_banks calculation for SI drm/radeon/dp: check for errors in dpcd reads drm/radeon: avoid high jitter with small frac divs drm/radeon: check buffer relocation offset drm/radeon: use pflip irq on R600+ v2 drm/radeon/uvd: use lower clocks on old UVD to boot v2
2014-05-06agp: info leak in agpioc_info_wrap()Dan Carpenter
On 64 bit systems the agp_info struct has a 4 byte hole between ->agp_mode and ->aper_base. We need to clear it to avoid disclosing stack information to userspace. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>