summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2011-01-19ath5k: Fix return codes for eeprom read functions.Wojciech Dubowik
Eeprom read functions are of bool type and not int. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k: reduce the likelihood of baseband hang check false positivesFelix Fietkau
Since baseband hangs are rare, but the hang check function has a high false positive rate in some situations, we need to add more reliable indicators. In AP mode we can use blocked beacon transmissions as an indicator, they should be rare enough. In station mode, we can skip the hang check entirely, since a true hang will trigger beacon loss detection, and mac80211 will rescan, which leads to a hw reset that will bring the hardware back to life. To make this more reliable, we need to skip fast channel changes if the hardware appears to be stuck. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k: reinitialize block ack window data when starting aggregationFelix Fietkau
There might be some old stale data left, which could confuse tracking of pending tx frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k: fix initial sequence number after starting an ampdu sessionFelix Fietkau
txtid->seq_start may not always be up to date, when there is HT non-AMPDU traffic just before starting an AMPDU session. Relying on txtid->seq_next is better, since it is also used to generate the sequence numbers for all QoS data frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k: fix bogus sequence number increases on aggregation tid flushFelix Fietkau
When a tid pointer is passed to ath_tx_send_normal(), it increases the starting sequence number for the next AMPDU action frame, which should only be done if the sequence number assignment is fresh. In this case it is clearly not. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19rt2x00: Fix and fine-tune rf registers for RT3070/RT3071/RT3090RA-Jay Hung
Basically fix and fine-tune RT3070/RT3071/RT3090 chip RF initial value when call rt2800_init_rfcsr Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19rt2x00: Fix radio off hang issue for PCIE interfaceRA-Jay Hung
PCI/PCIE radio off behavior is different from SOC/USB. They mainly use MCU command to disable DMA, TX/RX and enter power saving mode. Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k_hw: Offload USB eeprom reading to targetSujith Manoharan
For USB devices, reading the EEPROM data can be offloaded to the target. Use multiple register reads to take advantage of this feature to reduce initialization time. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k_htc: Add multiple register read APISujith Manoharan
This would decrease latency in reading bulk registers. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19mwl8k: Enable HW encryption for AP modeNishant Sarmukadam
set_key callback is defined for mac80211 to install keys for HW crypto in AP mode. Driver currently falls back to SW crypto in STA mode. Add support to configure the keys appropriately in the hardware after the set_key routine is called. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19mwl8k: Set mac80211 rx status flags appropriately when hw crypto is enabledNishant Sarmukadam
When hw crypto is enabled, set rx status flags appropriately depending on whether hw crypto is enabled for a particular bss. Also report MIC errors to mac80211, so that counter measures can be initiated Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: yogesh powar <yogeshp@marvell.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19mwl8k: Add encapsulation of data packet for cryptoNishant Sarmukadam
Different tail pads will be needed for crypto depending on the crypto mode. Add support to encapsulate the packets with appropriate pad value. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19mwl8k: Modify add_dma_header to include pad parametersNishant Sarmukadam
Add capability to add_dma_header to support padding at tail of the data packet to be transmitted when crypto is enabled. Padding is required for adding crypto information in data packets for supporting 802.11 security modes. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-18Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm93) Add support for LM94
2011-01-18Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ...
2011-01-18hwmon: (lm93) Add support for LM94Guenter Roeck
This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-18SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCsGabor Juhos
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: spi-devel-general@lists.sourceforge.net Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1960/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-17staging: fix build failure in bcm driverAndres Salomon
While building latest Linus git, I hit the following: CC [M] drivers/staging/bcm/Qos.o drivers/staging/bcm/Qos.c: In function ‘PruneQueue’: drivers/staging/bcm/Qos.c:367: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’ drivers/staging/bcm/Qos.c: In function ‘flush_all_queues’: drivers/staging/bcm/Qos.c:416: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’ make[5]: *** [drivers/staging/bcm/Qos.o] Error 1 make[4]: *** [drivers/staging/bcm] Error 2 make[3]: *** [drivers/staging] Error 2 As well as: CC [M] drivers/staging/bcm/Transmit.o drivers/staging/bcm/Transmit.c: In function ‘SetupNextSend’: drivers/staging/bcm/Transmit.c:163: error: ‘struct netdev_queue’ has no member named ‘tx_bytes’ drivers/staging/bcm/Transmit.c:164: error: ‘struct netdev_queue’ has no member named ‘tx_packets’ make[2]: *** [drivers/staging/bcm/Transmit.o] Error 1 tx_dropped/tx_bytes_tx_packets were removed in commit 1ac9ad13. This patch converts bcm to use net_device_stats instead of netdev_queue. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Update workqueue usage RDMA/nes: Fix incorrect SFP+ link status detection on driver init RDMA/nes: Fix SFP+ link down detection issue with switch port disable RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events RDMA/nes: Fix bonding on iw_nes IB/srp: Test only once whether iu allocation succeeded IB/mlx4: Handle protocol field in multicast table RDMA: Use vzalloc() to replace vmalloc()+memset(0) mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long) IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
2011-01-17Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: spi/spi_sh_msiof: fix a wrong free_irq() parameter dt/flattree: Return virtual address from early_init_dt_alloc_memory_arch()
2011-01-17Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (59 commits) mtd: mtdpart: disallow reading OOB past the end of the partition mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe UBI: use mtd->writebufsize to set minimal I/O unit size mtd: initialize writebufsize in the MTD object of a partition mtd: onenand: add mtd->writebufsize initialization mtd: nand: add mtd->writebufsize initialization mtd: cfi: add writebufsize initialization mtd: add writebufsize field to mtd_info struct mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use mtd: OneNAND: add enable / disable methods to onenand_chip mtd: m25p80: Fix JEDEC ID for AT26DF321 mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max) mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips mtd: nand: ams-delta: drop omap_read/write, use ioremap mtd: m25p80: add debugging trace in sst_write mtd: nand: ams-delta: select for built-in by default mtd: OneNAND: lighten scary initial bad block messages mtd: OneNAND: OMAP2/3: add support for command line partitioning mtd: nand: rearrange ONFI revision checking, add ONFI 2.3 ... Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.
2011-01-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: fs: fix address space warnings in ioctl_fiemap() aio: check return value of create_workqueue() hpfs_setattr error case avoids unlock_kernel compat: copy missing fields in compat_statfs64 to user compat: update comment of compat statfs syscalls compat: remove unnecessary assignment in compat_rw_copy_check_uvector() fs: FS_POSIX_ACL does not depend on BLOCK fs: Remove unlikely() from fget_light() fs: Remove unlikely() from fput_light() fallocate should be a file operation make the feature checks in ->fallocate future proof staging: smbfs building fix tidy up around finish_automount() don't drop newmnt on error in do_add_mount() Take the completion of automount into new helper
2011-01-17Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: balance asic_reset functions drm/radeon/kms: remove duplicate card_posted() functions drm/radeon/kms: add module option for pcie gen2 drm/radeon/kms: fix typo in evergreen safe reg drm/nouveau: fix gpu page faults triggered by plymouthd drm/nouveau: greatly simplify mm, killing some bugs in the process drm/nvc0: enable protection of system-use-only structures in vm drm/nv40: initialise 0x17xx on all chipsets that have it drm/nv40: make detection of 0x4097-ful chipsets available everywhere
2011-01-17Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (63 commits) ARM: PL08x: cleanup comments Update CONFIG_MD_RAID6_PQ to CONFIG_RAID6_PQ in drivers/dma/iop-adma.c ARM: PL08x: fix a warning Fix dmaengine_submit() return type dmaengine: at_hdmac: fix race while monitoring channel status dmaengine: at_hdmac: flags located in first descriptor dmaengine: at_hdmac: use subsys_initcall instead of module_init dmaengine: at_hdmac: no need set ACK in new descriptor dmaengine: at_hdmac: trivial add precision to unmapping comment dmaengine: at_hdmac: use dma_address to program DMA hardware pch_dma: support new device ML7213 IOH ARM: PL08x: prevent dma_set_runtime_config() reconfiguring memcpy channels ARM: PL08x: allow dma_set_runtime_config() to return errors ARM: PL08x: fix locking between prepare function and submit function ARM: PL08x: introduce 'phychan_hold' to hold on to physical channels ARM: PL08x: put txd's on the pending list in pl08x_tx_submit() ARM: PL08x: rename 'desc_list' as 'pend_list' ARM: PL08x: implement unmapping of memcpy buffers ARM: PL08x: store prep_* flags in async_tx structure ARM: PL08x: shrink srcbus/dstbus in txd structure ...
2011-01-17spi/spi_sh_msiof: fix a wrong free_irq() parameterGuennadi Liakhovetski
Without this fix reloading of the driver is impossible. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-17mtd: mtdpart: disallow reading OOB past the end of the partitionArtem Bityutskiy
This patch fixes the mtdpart bug which allows users reading OOB past the end of the partition. This happens because 'part_read_oob()' allows reading multiple OOB areas in one go, and mtdparts does not validate the OOB length in the request. Although there is such check in 'nand_do_read_oob()' in nand_base.c, but it checks that we do not read past the flash chip, not the partition, because in nand_base.c we work with the whole chip (e.g., mtd->size in nand_base.c is the size of the whole chip). So this check cannot be done correctly in nand_base.c and should be instead done in mtdparts.c. This problem was reported by Jason Liu <r64343@freescale.com> and reproduced with nandsim: $ modprobe nandsim first_id_byte=0x20 second_id_byte=0xaa third_id_byte=0x00 \ fourth_id_byte=0x15 parts=0x400,0x400 $ modprobe nandsim mtd_oobtest.ko dev=0 $ dmesg = snip = mtd_oobtest: attempting to read past end of device mtd_oobtest: an error is expected... mtd_oobtest: error: read past end of device = snip = mtd_oobtest: finished with 2 errors Reported-by: Jason Liu <liu.h.jason@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-17staging: smbfs building fixYang Ruirui
Building error for smbfs: drivers/staging/smbfs/dir.c:286: error: static declaration of 'smbfs_dentry_operations' follows non-static declaration drivers/staging/smbfs/proto.h:42: error: previous declaration of 'smbfs_dentry_operations' was here drivers/staging/smbfs/dir.c:294: error: static declaration of 'smbfs_dentry_operations_case' follows non-static declaration drivers/staging/smbfs/proto.h:41: error: previous declaration of 'smbfs_dentry_operations_case' was here make[3]: *** [drivers/staging/smbfs/dir.o] Error 1 make[2]: *** [drivers/staging/smbfs] Error 2 make[1]: *** [drivers/staging] Error 2 make[1]: *** Waiting for unfinished jobs.... Fix it by removing static keywords Signed-off-by: Yang Ruirui <ruirui.r.yang@tieto.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-16Merge branches 'misc', 'mlx4', 'mthca', 'nes' and 'srp' into for-nextRoland Dreier
2011-01-16RDMA: Update workqueue usageTejun Heo
* ib_wq is added, which is used as the common workqueue for infiniband instead of the system workqueue. All system workqueue usages including flush_scheduled_work() callers are converted to use and flush ib_wq. * cancel_delayed_work() + flush_scheduled_work() converted to cancel_delayed_work_sync(). * qib_wq is removed and ib_wq is used instead. This is to prepare for deprecation of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-17drm/radeon/kms: balance asic_reset functionsAlex Deucher
First, we were calling mc_stop() at the top of the function which turns off all MC (memory controller) clients, then checking if the GPU is idle. If it was idle we returned without re-enabling the MC clients which would lead to a blank screen, etc. This patch checks if the GPU is idle before calling mc_stop(). Second, if the reset failed, we were returning without re-enabling the MC clients. This patch re-enables the MC clients before returning regardless of whether the reset was successful or not. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17drm/radeon/kms: remove duplicate card_posted() functionsAlex Deucher
Use the common one for all asics. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17drm/radeon/kms: add module option for pcie gen2Alex Deucher
Switching to pcie gen2 causes problems on some boards. Add a module option to turn it on/off. There are gen2 compatability issues with some motherboards it seems. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33027 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17drm/radeon/kms: fix typo in evergreen safe regAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17Merge remote branch 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next ↵Dave Airlie
into drm-fixes * 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: drm/nouveau: fix gpu page faults triggered by plymouthd drm/nouveau: greatly simplify mm, killing some bugs in the process drm/nvc0: enable protection of system-use-only structures in vm drm/nv40: initialise 0x17xx on all chipsets that have it drm/nv40: make detection of 0x4097-ful chipsets available everywhere
2011-01-17drm/nouveau: fix gpu page faults triggered by plymouthdBen Skeggs
The switch to separate BAR and channel address spaces made the fbcon memory address calculation incorrect on NV50+ boards, this commit fixes that. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-17drm/nouveau: greatly simplify mm, killing some bugs in the processBen Skeggs
Reviewed-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-17drm/nvc0: enable protection of system-use-only structures in vmBen Skeggs
Somehow missed this in the original merge of the nvc0 code. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-17drm/nv40: initialise 0x17xx on all chipsets that have itBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-17drm/nv40: make detection of 0x4097-ful chipsets available everywhereBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-16drivers/nfc/pn544.c: fix min_t warningsAndrew Morton
Fix these: drivers/nfc/pn544.c: In function 'pn544_read': drivers/nfc/pn544.c:356: warning: comparison of distinct pointer types lacks a cast drivers/nfc/pn544.c:377: warning: comparison of distinct pointer types lacks a cast drivers/nfc/pn544.c: In function 'pn544_write': drivers/nfc/pn544.c:463: warning: comparison of distinct pointer types lacks a cast drivers/nfc/pn544.c:485: warning: comparison of distinct pointer types lacks a cast Cc: "Matti J. Aaltonen" <matti.j.aaltonen@nokia.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-16ARM: PL08x: cleanup commentsRussell King - ARM Linux
Cleanup the formatting of comments, remove some which don't make sense anymore. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [fix conflict with 96a608a4] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6: ocfs2: Make OCFS2_FS depend on CONFIGFS_FS dlm: Make DLM depend on CONFIGFS_FS net: Make NETCONSOLE_DYNAMIC depend on CONFIGFS_FS configfs: change depends -> select SYSFS [SCSI] sd,sr: kill compat SDEV_MEDIA_CHANGE event [SCSI] sd: implement sd_check_events()
2011-01-16RDMA/nes: Fix incorrect SFP+ link status detection on driver initMaciej Sosnowski
During iw_nes initialization the link status for SFP+ PHY is always detected as "up" regardless of real state (cable either connected or disconnected). Add SFP+ PHY specific link status detection to the iw_nes initialization procedure. Use link status recheck for netdev_open to detect delayed state updates. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16RDMA/nes: Fix SFP+ link down detection issue with switch port disableMaciej Sosnowski
In case of SFP+ PHY, link status check at interrupt processing can give false results. For proper link status change detection a delayed recheck is needed to give nes registers time to settle. Add a periodic link status recheck scheduled at interrupt to detect potential delayed registers state changes. Addresses: http://bugs.openfabrics.org/bugzilla/show_bug.cgi?id=2117 Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE eventsMaciej Sosnowski
Depending on link state change, IB_EVENT_PORT_ERR or IB_EVENT_PORT_ACTIVE should be generated when handling MAC interrupts. Plugging in a cable happens to result in series of interrupts changing driver's link state a number of times before finally staying at link up (e.g. link up, link down, link up, link down, ..., link up). To prevent sending series of redundant IB_EVENT_PORT_ACTIVE and IB_EVENT_PORT_ERR events, we use a timer to debounce them in nes_port_ibevent(). Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16RDMA/nes: Fix bonding on iw_nesMaciej Sosnowski
Enable configuring bonds on nes devices by adding missing support for master net_device to the driver. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16net: Make NETCONSOLE_DYNAMIC depend on CONFIGFS_FSNicholas Bellinger
This patch fixes the following kconfig error after changing CONFIGFS_FS -> select SYSFS: fs/sysfs/Kconfig:1:error: recursive dependency detected! fs/sysfs/Kconfig:1: symbol SYSFS is selected by CONFIGFS_FS fs/configfs/Kconfig:1: symbol CONFIGFS_FS is selected by NETCONSOLE_DYNAMIC drivers/net/Kconfig:3390: symbol NETCONSOLE_DYNAMIC depends on SYSFS Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: Joel Becker <jlbec@evilplan.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: James Bottomley <James.Bottomley@suse.de>
2011-01-16ACPI: Fix boot problem related to APEI with acpi_disabled setRafael J. Wysocki
Commit 415e12b23792 ("PCI/ACPI: Request _OSC control once for each root bridge (v3)") put the acpi_hest_init() call in acpi_pci_root_init() into a wrong place, presumably because the author confused acpi_pci_disabled with acpi_disabled. Bring the code ordering in acpi_pci_root_init() back to sanity. Additionally, make sure that hest_disable is set when acpi_disabled is set, which is going to prevent acpi_hest_parse(), that still may be executed for acpi_disabled=1 through aer_acpi_firmware_first(), from crashing because of uninitialized hest_tab. Reported-and-tested-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (23 commits) sanitize vfsmount refcounting changes fix old umount_tree() breakage autofs4: Merge the remaining dentry ops tables Unexport do_add_mount() and add in follow_automount(), not ->d_automount() Allow d_manage() to be used in RCU-walk mode Remove a further kludge from __do_follow_link() autofs4: Bump version autofs4: Add v4 pseudo direct mount support autofs4: Fix wait validation autofs4: Clean up autofs4_free_ino() autofs4: Clean up dentry operations autofs4: Clean up inode operations autofs4: Remove unused code autofs4: Add d_manage() dentry operation autofs4: Add d_automount() dentry operation Remove the automount through follow_link() kludge code from pathwalk CIFS: Use d_automount() rather than abusing follow_link() NFS: Use d_automount() rather than abusing follow_link() AFS: Use d_automount() rather than abusing follow_link() Add an AT_NO_AUTOMOUNT flag to suppress terminal automount ...
2011-01-16sanitize vfsmount refcounting changesAl Viro
Instead of splitting refcount between (per-cpu) mnt_count and (SMP-only) mnt_longrefs, make all references contribute to mnt_count again and keep track of how many are longterm ones. Accounting rules for longterm count: * 1 for each fs_struct.root.mnt * 1 for each fs_struct.pwd.mnt * 1 for having non-NULL ->mnt_ns * decrement to 0 happens only under vfsmount lock exclusive That allows nice common case for mntput() - since we can't drop the final reference until after mnt_longterm has reached 0 due to the rules above, mntput() can grab vfsmount lock shared and check mnt_longterm. If it turns out to be non-zero (which is the common case), we know that this is not the final mntput() and can just blindly decrement percpu mnt_count. Otherwise we grab vfsmount lock exclusive and do usual decrement-and-check of percpu mnt_count. For fs_struct.c we have mnt_make_longterm() and mnt_make_shortterm(); namespace.c uses the latter in places where we don't already hold vfsmount lock exclusive and opencodes a few remaining spots where we need to manipulate mnt_longterm. Note that we mostly revert the code outside of fs/namespace.c back to what we used to have; in particular, normal code doesn't need to care about two kinds of references, etc. And we get to keep the optimization Nick's variant had bought us... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-11 23:05:21 +0000