| Age | Commit message (Collapse) | Author |
|---|
|
I was using i_mutex for this, but we're getting bogus lockdep warnings by doing
that and theres no real way to get rid of those, so just stop using i_mutex to
protect delalloc metadata reservations and use a delalloc mutex instead. This
shouldn't be contended often at all, only if you are writing and mmap writing to
the file at the same time. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
People have been reporting ENOSPC crashes in finish_ordered_io. This is because
we try to steal from the delalloc block rsv to satisfy a reservation to update
the inode. The problem with this is we don't explicitly save space for updating
the inode when doing delalloc. This is kind of a problem and we've gotten away
with this because way back when we just stole from the delalloc reserve without
any questions, and this worked out fine because generally speaking the leaf had
been modified either by the mtime update when we did the original write or
because we just updated the leaf when we inserted the file extent item, only on
rare occasions had the leaf not actually been modified, and that was still ok
because we'd just use a block or two out of the over-reservation that is
delalloc.
Then came the delayed inode stuff. This is amazing, except it wants a full
reservation for updating the inode since it may do it at some point down the
road after we've written the blocks and we have to recow everything again. This
worked out because the delayed inode stuff just stole from the global reserve,
that is until recently when I changed that because it caused other problems.
So here we are, we're doing everything right and being screwed for it. So take
an extra reservation for the inode at delalloc reservation time and carry it
through the life of the delalloc reservation. If we need it we can steal it in
the delayed inode stuff. If we have already stolen it try and do a normal
metadata reservation. If that fails try to steal from the delalloc reservation.
If _that_ fails we'll get a WARN_ON() so I can start thinking of a better way to
solve this and in the meantime we'll steal from the global reserve.
With this patch I ran xfstests 13 in a loop for a couple of hours and didn't see
any problems.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
We have not been reserving enough space for checksums. We were just reserving
bytes for the checksum items themselves, we were not taking into account having
to cow the tree and such. This patch adds a csum_bytes counter to the inode for
keeping track of the number of bytes outstanding we have for checksums. Then we
calculate how many leaves would be required for the checksums we are given and
use that to reserve space. This adds a significant amount of bytes to our
reservations, but we will handle this later. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
reserved_bytes is not used for anything in the inode, remove it.
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
Moving things around to give us better packing in the btrfs_inode. This reduces
the size of our inode by 8 bytes. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
We can reproduce this oops via the following steps:
$ mkfs.btrfs /dev/sdb7
$ mount /dev/sdb7 /mnt/btrfs
$ for ((i=0; i<3; i++)); do btrfs sub snap /mnt/btrfs /mnt/btrfs/s_$i; done
$ rm -fr /mnt/btrfs/*
$ rm -fr /mnt/btrfs/*
then we'll get
------------[ cut here ]------------
kernel BUG at fs/btrfs/inode.c:2264!
[...]
Call Trace:
[<ffffffffa05578c7>] btrfs_rmdir+0xf7/0x1b0 [btrfs]
[<ffffffff81150b95>] vfs_rmdir+0xa5/0xf0
[<ffffffff81153cc3>] do_rmdir+0x123/0x140
[<ffffffff81145ac7>] ? fput+0x197/0x260
[<ffffffff810aecff>] ? audit_syscall_entry+0x1bf/0x1f0
[<ffffffff81153d0d>] sys_unlinkat+0x2d/0x40
[<ffffffff8147896b>] system_call_fastpath+0x16/0x1b
RIP [<ffffffffa054f7b9>] btrfs_orphan_add+0x179/0x1a0 [btrfs]
When it comes to btrfs_lookup_dentry, we may set a snapshot's inode->i_ino
to BTRFS_EMPTY_SUBVOL_DIR_OBJECTID instead of BTRFS_FIRST_FREE_OBJECTID,
while the snapshot's location.objectid remains unchanged.
However, btrfs_ino() does not take this into account, and returns a wrong ino,
and causes the oops.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Now that we are using regular file crcs for the free space cache,
we can deadlock if we try to read the free_space_inode while we are
updating the crc tree.
This commit fixes things by using the commit_root to read the crcs. This is
safe because we the free space cache file would already be loaded if
that block group had been changed in the current transaction.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
So I had this brilliant idea to use atomic counters for outstanding and reserved
extents, but this turned out to be a bad idea. Consider this where we have 1
outstanding extent and 1 reserved extent
Reserver Releaser
atomic_dec(outstanding) now 0
atomic_read(outstanding)+1 get 1
atomic_read(reserved) get 1
don't actually reserve anything because
they are the same
atomic_cmpxchg(reserved, 1, 0)
atomic_inc(outstanding)
atomic_add(0, reserved)
free reserved space for 1 extent
Then the reserver now has no actual space reserved for it, and when it goes to
finish the ordered IO it won't have enough space to do it's allocation and you
get those lovely warnings.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-work into for-linus
Conflicts:
fs/btrfs/disk-io.c
fs/btrfs/extent-tree.c
fs/btrfs/free-space-cache.c
fs/btrfs/inode.c
fs/btrfs/transaction.c
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This will detect small random writes into files and
queue the up for an auto defrag process. It isn't well suited to
database workloads yet, but works for smaller files such as rpm, sqlite
or bdb databases.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Originally this was going to be used as a way to give hints to the allocator,
but frankly we can get much better hints elsewhere and it's not even used at all
for anything usefull. In addition to be completely useless, when we initialize
an inode we try and find a freeish block group to set as the inodes block group,
and with a completely full 40gb fs this takes _forever_, so I imagine with say
1tb fs this is just unbearable. So just axe the thing altoghether, we don't
need it and it saves us 8 bytes in the inode and saves us 500 microseconds per
inode lookup in my testcase. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
Conflicts:
fs/btrfs/inode.c
fs/btrfs/ioctl.c
fs/btrfs/transaction.c
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Changelog V5 -> V6:
- Fix oom when the memory load is high, by storing the delayed nodes into the
root's radix tree, and letting btrfs inodes go.
Changelog V4 -> V5:
- Fix the race on adding the delayed node to the inode, which is spotted by
Chris Mason.
- Merge Chris Mason's incremental patch into this patch.
- Fix deadlock between readdir() and memory fault, which is reported by
Itaru Kitayama.
Changelog V3 -> V4:
- Fix nested lock, which is reported by Itaru Kitayama, by updating space cache
inode in time.
Changelog V2 -> V3:
- Fix the race between the delayed worker and the task which does delayed items
balance, which is reported by Tsutomu Itoh.
- Modify the patch address David Sterba's comment.
- Fix the bug of the cpu recursion spinlock, reported by Chris Mason
Changelog V1 -> V2:
- break up the global rb-tree, use a list to manage the delayed nodes,
which is created for every directory and file, and used to manage the
delayed directory name index items and the delayed inode item.
- introduce a worker to deal with the delayed nodes.
Compare with Ext3/4, the performance of file creation and deletion on btrfs
is very poor. the reason is that btrfs must do a lot of b+ tree insertions,
such as inode item, directory name item, directory name index and so on.
If we can do some delayed b+ tree insertion or deletion, we can improve the
performance, so we made this patch which implemented delayed directory name
index insertion/deletion and delayed inode update.
Implementation:
- introduce a delayed root object into the filesystem, that use two lists to
manage the delayed nodes which are created for every file/directory.
One is used to manage all the delayed nodes that have delayed items. And the
other is used to manage the delayed nodes which is waiting to be dealt with
by the work thread.
- Every delayed node has two rb-tree, one is used to manage the directory name
index which is going to be inserted into b+ tree, and the other is used to
manage the directory name index which is going to be deleted from b+ tree.
- introduce a worker to deal with the delayed operation. This worker is used
to deal with the works of the delayed directory name index items insertion
and deletion and the delayed inode update.
When the delayed items is beyond the lower limit, we create works for some
delayed nodes and insert them into the work queue of the worker, and then
go back.
When the delayed items is beyond the upper bound, we create works for all
the delayed nodes that haven't been dealt with, and insert them into the work
queue of the worker, and then wait for that the untreated items is below some
threshold value.
- When we want to insert a directory name index into b+ tree, we just add the
information into the delayed inserting rb-tree.
And then we check the number of the delayed items and do delayed items
balance. (The balance policy is above.)
- When we want to delete a directory name index from the b+ tree, we search it
in the inserting rb-tree at first. If we look it up, just drop it. If not,
add the key of it into the delayed deleting rb-tree.
Similar to the delayed inserting rb-tree, we also check the number of the
delayed items and do delayed items balance.
(The same to inserting manipulation)
- When we want to update the metadata of some inode, we cached the data of the
inode into the delayed node. the worker will flush it into the b+ tree after
dealing with the delayed insertion and deletion.
- We will move the delayed node to the tail of the list after we access the
delayed node, By this way, we can cache more delayed items and merge more
inode updates.
- If we want to commit transaction, we will deal with all the delayed node.
- the delayed node will be freed when we free the btrfs inode.
- Before we log the inode items, we commit all the directory name index items
and the delayed inode update.
I did a quick test by the benchmark tool[1] and found we can improve the
performance of file creation by ~15%, and file deletion by ~20%.
Before applying this patch:
Create files:
Total files: 50000
Total time: 1.096108
Average time: 0.000022
Delete files:
Total files: 50000
Total time: 1.510403
Average time: 0.000030
After applying this patch:
Create files:
Total files: 50000
Total time: 0.932899
Average time: 0.000019
Delete files:
Total files: 50000
Total time: 1.215732
Average time: 0.000024
[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3
Many thanks for Kitayama-san's help!
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
There's a potential problem in 32bit system when we exhaust 32bit inode
numbers and start to allocate big inode numbers, because btrfs uses
inode->i_ino in many places.
So here we always use BTRFS_I(inode)->location.objectid, which is an
u64 variable.
There are 2 exceptions that BTRFS_I(inode)->location.objectid !=
inode->i_ino: the btree inode (0 vs 1) and empty subvol dirs (256 vs 2),
and inode->i_ino will be used in those cases.
Another reason to make this change is I'm going to use a special inode
to save free ino cache, and the inode number must be > (u64)-256.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
We track delayed allocation per inodes via 2 counters, one is
outstanding_extents and reserved_extents. Outstanding_extents is already an
atomic_t, but reserved_extents is not and is protected by a spinlock. So
convert this to an atomic_t and instead of using a spinlock, use atomic_cmpxchg
when releasing delalloc bytes. This makes our inode 72 bytes smaller, and
reduces locking overhead (albiet it was minimal to begin with). Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
Make the code aware of compression type, instead of always assuming
zlib compression.
Also make the zlib workspace function as common code for all
compression types.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
reserve metadata space for handling orphan inodes
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Introduce metadata reservation context for delayed allocation
and update various related functions.
This patch also introduces EXTENT_FIRST_DELALLOC control bit for
set/clear_extent_bit. It tells set/clear_bit_hook whether they
are processing the first extent_state with EXTENT_DELALLOC bit
set. This change is important if set/clear_extent_bit involves
multiple extent_state.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The btrfs defrag ioctl was limited to doing the entire file. This
commit adds a new interface that can defrag a specific range inside
the file.
It can also force compression on the file, allowing you to selectively
compress individual files after they were created, even when mount -o
compress isn't turned on.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
There are some cases file extents are inserted without involving
ordered struct. In these cases, we update disk_i_size directly,
without checking pending ordered extent and DELALLOC bit. This
patch extends btrfs_ordered_update_i_size() to handle these cases.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
rpm has a habit of running fdatasync when the file hasn't
changed. We already detect if a file hasn't been changed
in the current transaction but it might have been sent to
the tree-log in this transaction and not changed since
the last call to fsync.
In this case, we want to avoid a tree log sync, which includes
a number of synchronous writes and barriers. This commit
extends the existing tracking of the last transaction to change
a file to also track the last sub-transaction.
The end result is that rpm -ivh and -Uvh are roughly twice as fast,
and on par with ext3.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This patch fixes an issue with the delalloc metadata space reservation
code. The problem is we used to free the reservation as soon as we
allocated the delalloc region. The problem with this is if we are not
inserting an inline extent, we don't actually insert the extent item until
after the ordered extent is written out. This patch does 3 things,
1) It moves the reservation clearing stuff into the ordered code, so when
we remove the ordered extent we remove the reservation.
2) It adds a EXTENT_DO_ACCOUNTING flag that gets passed when we clear
delalloc bits in the cases where we want to clear the metadata reservation
when we clear the delalloc extent, in the case that we do an inline extent
or we invalidate the page.
3) It adds another waitqueue to the space info so that when we start a fs
wide delalloc flush, anybody else who also hits that area will simply wait
for the flush to finish and then try to make their allocation.
This has been tested thoroughly to make sure we did not regress on
performance.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
At the start of a transaction we do a btrfs_reserve_metadata_space() and
specify how many items we plan on modifying. Then once we've done our
modifications and such, just call btrfs_unreserve_metadata_space() for
the same number of items we reserved.
For keeping track of metadata needed for data I've had to add an extent_io op
for when we merge extents. This lets us track space properly when we are doing
sequential writes, so we don't end up reserving way more metadata space than
what we need.
The only place where the metadata space accounting is not done is in the
relocation code. This is because Yan is going to be reworking that code in the
near future, so running btrfs-vol -b could still possibly result in a ENOSPC
related panic. This patch also turns off the metadata_ratio stuff in order to
allow users to more efficiently use their disk space.
This patch makes it so we track how much metadata we need for an inode's
delayed allocation extents by tracking how many extents are currently
waiting for allocation. It introduces two new callbacks for the
extent_io tree's, merge_extent_hook and split_extent_hook. These help
us keep track of when we merge delalloc extents together and split them
up. Reservations are handled prior to any actually dirty'ing occurs,
and then we unreserve after we dirty.
btrfs_unreserve_metadata_for_delalloc() will make the appropriate
unreservations as needed based on the number of reservations we
currently have and the number of extents we currently have. Doing the
reservation outside of doing any of the actual dirty'ing lets us do
things like filemap_flush() the inode to try and force delalloc to
happen, or as a last resort actually start allocation on all delalloc
inodes in the fs. This has survived dbench, fs_mark and an fsx torture
test.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
btrfs allows subvolumes and snapshots anywhere in the directory tree.
If we snapshot a subvolume that contains a link to other subvolume
called subvolA, subvolA can be accessed through both the original
subvolume and the snapshot. This is similar to creating hard link to
directory, and has the very similar problems.
The aim of this patch is enforcing there is only one access point to
each subvolume. Only the first directory entry (the one added when
the subvolume/snapshot was created) is treated as valid access point.
The first directory entry is distinguished by checking root forward
reference. If the corresponding root forward reference is missing,
we know the entry is not the first one.
This patch also adds snapshot/subvolume rename support, the code
allows rename subvolume link across subvolumes.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add support for the standard attributes set via chattr and read via
lsattr. Currently we store the attributes in the flags value in
the btrfs inode, but I wonder whether we should split it into two so
that we don't have to keep converting between the two formats.
Remove the btrfs_clear_flag/btrfs_set_flag/btrfs_test_flag macros
as they were confusing the existing code and got in the way of the
new additions.
Also add the FS_IOC_GETVERSION ioctl for getting i_generation as it's
trivial.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This commit introduces a new kind of back reference for btrfs metadata.
Once a filesystem has been mounted with this commit, IT WILL NO LONGER
BE MOUNTABLE BY OLDER KERNELS.
When a tree block in subvolume tree is cow'd, the reference counts of all
extents it points to are increased by one. At transaction commit time,
the old root of the subvolume is recorded in a "dead root" data structure,
and the btree it points to is later walked, dropping reference counts
and freeing any blocks where the reference count goes to 0.
The increments done during cow and decrements done after commit cancel out,
and the walk is a very expensive way to go about freeing the blocks that
are no longer referenced by the new btree root. This commit reduces the
transaction overhead by avoiding the need for dead root records.
When a non-shared tree block is cow'd, we free the old block at once, and the
new block inherits old block's references. When a tree block with reference
count > 1 is cow'd, we increase the reference counts of all extents
the new block points to by one, and decrease the old block's reference count by
one.
This dead tree avoidance code removes the need to modify the reference
counts of lower level extents when a non-shared tree block is cow'd.
But we still need to update back ref for all pointers in the block.
This is because the location of the block is recorded in the back ref
item.
We can solve this by introducing a new type of back ref. The new
back ref provides information about pointer's key, level and in which
tree the pointer lives. This information allow us to find the pointer
by searching the tree. The shortcoming of the new back ref is that it
only works for pointers in tree blocks referenced by their owner trees.
This is mostly a problem for snapshots, where resolving one of these
fuzzy back references would be O(number_of_snapshots) and quite slow.
The solution used here is to use the fuzzy back references in the common
case where a given tree block is only referenced by one root,
and use the full back references when multiple roots have a reference
on a given block.
This commit adds per subvolume red-black tree to keep trace of cached
inodes. The red-black tree helps the balancing code to find cached
inodes whose inode numbers within a given range.
This commit improves the balancing code by introducing several data
structures to keep the state of balancing. The most important one
is the back ref cache. It caches how the upper level tree blocks are
referenced. This greatly reduce the overhead of checking back ref.
The improved balancing code scales significantly better with a large
number of snapshots.
This is a very large commit and was written in a number of
pieces. But, they depend heavily on the disk format change and were
squashed together to make sure git bisect didn't end up in a
bad state wrt space balancing or the format change.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Renames and truncates are both common ways to replace old data with new
data. The filesystem can make an effort to make sure the new data is
on disk before actually replacing the old data.
This is especially important for rename, which many application use as
though it were atomic for both the data and the metadata involved. The
current btrfs code will happily replace a file that is fully on disk
with one that was just created and still has pending IO.
If we crash after transaction commit but before the IO is done, we'll end
up replacing a good file with a zero length file. The solution used
here is to create a list of inodes that need special ordering and force
them to disk before the commit is done. This is similar to the
ext3 style data=ordering, except it is only done on selected files.
Btrfs is able to get away with this because it does not wait on commits
very often, even for fsync (which use a sub-commit).
For renames, we order the file when it wasn't already
on disk and when it is replacing an existing file. Larger files
are sent to filemap_flush right away (before the transaction handle is
opened).
For truncates, we order if the file goes from non-zero size down to
zero size. This is a little different, because at the time of the
truncate the file has no dirty bytes to order. But, we flag the inode
so that it is added to the ordered list on close (via release method). We
also immediately add it to the ordered list of the current transaction
so that we can try to flush down any writes the application sneaks in
before commit.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The tree logging code allows individual files or directories to be logged
without including operations on other files and directories in the FS.
It tries to commit the minimal set of changes to disk in order to
fsync the single file or directory that was sent to fsync or O_SYNC.
The tree logging code was allowing files and directories to be unlinked
if they were part of a rename operation where only one directory
in the rename was in the fsync log. This patch adds a few new rules
to the tree logging.
1) on rename or unlink, if the inode being unlinked isn't in the fsync
log, we must force a full commit before doing an fsync of the directory
where the unlink was done. The commit isn't done during the unlink,
but it is forced the next time we try to log the parent directory.
Solution: record transid of last unlink/rename per directory when the
directory wasn't already logged. For renames this is only done when
renaming to a different directory.
mkdir foo/some_dir
normal commit
rename foo/some_dir foo2/some_dir
mkdir foo/some_dir
fsync foo/some_dir/some_file
The fsync above will unlink the original some_dir without recording
it in its new location (foo2). After a crash, some_dir will be gone
unless the fsync of some_file forces a full commit
2) we must log any new names for any file or dir that is in the fsync
log. This way we make sure not to lose files that are unlinked during
the same transaction.
2a) we must log any new names for any file or dir during rename
when the directory they are being removed from was logged.
2a is actually the more important variant. Without the extra logging
a crash might unlink the old name without recreating the new one
3) after a crash, we must go through any directories with a link count
of zero and redo the rm -rf
mkdir f1/foo
normal commit
rm -rf f1/foo
fsync(f1)
The directory f1 was fully removed from the FS, but fsync was never
called on f1, only its parent dir. After a crash the rm -rf must
be replayed. This must be able to recurse down the entire
directory tree. The inode link count fixup code takes care of the
ugly details.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This is a step in the direction of better -ENOSPC handling. Instead of
checking the global bytes counter we check the space_info bytes counters to
make sure we have enough space.
If we don't we go ahead and try to allocate a new chunk, and then if that fails
we return -ENOSPC. This patch adds two counters to btrfs_space_info,
bytes_delalloc and bytes_may_use.
bytes_delalloc account for extents we've actually setup for delalloc and will
be allocated at some point down the line.
bytes_may_use is to keep track of how many bytes we may use for delalloc at
some point. When we actually set the extent_bit for the delalloc bytes we
subtract the reserved bytes from the bytes_may_use counter. This keeps us from
not actually being able to allocate space for any delalloc bytes.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
|
|
The block group structs are referenced in many different
places, and it's not safe to free while balancing. So, those block
group structs were simply leaked instead.
This patch replaces the block group pointer in the inode with the starting byte
offset of the block group and adds reference counting to the block group
struct.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
|
|
This adds a sequence number to the btrfs inode that is increased on
every update. NFS will be able to use that to detect when an inode has
changed, without relying on inaccurate time fields.
While we're here, this also:
Puts reserved space into the super block and inode
Adds a log root transid to the super so we can pick the newest super
based on the fsync log as well as the main transaction ID. For now
the log root transid is always zero, but that'll get fixed.
Adds a starting offset to the dev_item. This will let us do better
alignment calculations if we know the start of a partition on the disk.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This improves the comments at the top of many functions. It didn't
dive into the guts of functions because I was trying to
avoid merging problems with the new allocator and back reference work.
extent-tree.c and volumes.c were both skipped, and there is definitely
more work todo in cleaning and commenting the code.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Drop i_mutex during the commit
Don't bother doing the fsync at all unless the dir is marked as dirtied
and needing fsync in this transaction. For directories, this means
that someone has unlinked a file from the dir without fsyncing the
file.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
File syncs and directory syncs are optimized by copying their
items into a special (copy-on-write) log tree. There is one log tree per
subvolume and the btrfs super block points to a tree of log tree roots.
After a crash, items are copied out of the log tree and back into the
subvolume. See tree-log.c for all the details.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
rename and link don't always have a lock on the source inode, and
our use of a per-inode index variable was racy. This changes things to
store the index in a local variable instead.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
btrfs_drop_extents is always called with a range lock held on the inode.
But, it may operate on extents outside that range as it drops and splits
them.
This patch adds a per-inode mutex that is held while calling
btrfs_drop_extents and while inserting new extents into the tree. It
prevents races from two procs working against adjacent ranges in the tree.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This changes the ordered data code to update i_size after the extent
is on disk. An on disk i_size is maintained in the in-memory btrfs inode
structures, and this is updated as extents finish.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The old data=ordered code would force commit to wait until
all the data extents from the transaction were fully on disk. This
introduced large latencies into the commit and stalled new writers
in the transaction for a long time.
The new code changes the way data allocations and extents work:
* When delayed allocation is filled, data extents are reserved, and
the extent bit EXTENT_ORDERED is set on the entire range of the extent.
A struct btrfs_ordered_extent is allocated an inserted into a per-inode
rbtree to track the pending extents.
* As each page is written EXTENT_ORDERED is cleared on the bytes corresponding
to that page.
* When all of the bytes corresponding to a single struct btrfs_ordered_extent
are written, The previously reserved extent is inserted into the FS
btree and into the extent allocation trees. The checksums for the file
data are also updated.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Now that delayed allocation accounting works, i_blocks accounting is changed
to only modify i_blocks when extents inserted or removed.
The fillattr call is changed to include the delayed allocation byte count
in the i_blocks result.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
There is now extent_map for mapping offsets in the file to disk and
extent_io for state tracking, IO submission and extent_bufers.
The new extent_map code shifts from [start,end] pairs to [start,len], and
pushes the locking out into the caller. This allows a few performance
optimizations and is easier to use.
A number of extent_map usage bugs were fixed, mostly with failing
to remove extent_map entries when changing the file.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This patch adds NODATASUM & NODATACOW inode flags support.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This forces file data extents down the disk along with the metadata that
references them. The current implementation is fairly simple, and just
writes out all of the dirty pages in an inode before the commit.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
