| Age | Commit message (Collapse) | Author |
|---|
|
It is very likely that there are lots of subvolumes/snapshots in the filesystem,
so if we use global block reservation to do inode cache truncation, we may hog
all the free space that is reserved in global rsv. So it is better that we do
the free space reservation for inode cache truncation by ourselves.
Cc: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
inode cache
The filesystem with inode cache was forced to be read-only when we umounted it.
Steps to reproduce:
# mkfs.btrfs -f ${DEV}
# mount -o inode_cache ${DEV} ${MNT}
# dd if=/dev/zero of=${MNT}/file1 bs=1M count=8192
# btrfs fi syn ${MNT}
# dd if=${MNT}/file1 of=/dev/null bs=1M
# rm -f ${MNT}/file1
# btrfs fi syn ${MNT}
# umount ${MNT}
It is because there was no enough space to do inode cache truncation, and then
we aborted the current transaction.
But no space error is not a serious problem when we write out the inode cache,
and it is safe that we just skip this step if we meet this problem. So we need
not abort the current transaction.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
In some places(such as: evicting inode), we just can not flush the reserved
space of delalloc, flushing the delayed directory index and delayed inode
is OK, but we don't try to flush those things and just go back when there is
no enough space to be reserved. This patch fixes this problem.
We defined 3 types of the flush operations: NO_FLUSH, FLUSH_LIMIT and FLUSH_ALL.
If we can in the transaction, we should not flush anything, or the deadlock
would happen, so use NO_FLUSH. If we flushing the reserved space of delalloc
would cause deadlock, use FLUSH_LIMIT. In the other cases, FLUSH_ALL is used,
and we will flush all things.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
o For space info, the type of space info is useful for debug.
o For transaction handle, its transid is useful.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
btrfs currently handles most errors with BUG_ON. This patch is a work-in-
progress but aims to handle most errors other than internal logic
errors and ENOMEM more gracefully.
This iteration prevents most crashes but can run into lockups with
the page lock on occasion when the timing "works out."
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
|
|
The enospc tracing code added some interesting uses of
u64 pointer casts.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This in addition to a script in my btrfs-tracing tree will help track down space
leaks when we're getting space left over in block groups on umount. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
I-node cache forgets to reserve the space when writing out it. And when
we do some stress test, such as synctest, it will trigger WARN_ON() in
use_block_rsv().
WARNING: at fs/btrfs/extent-tree.c:5718 btrfs_alloc_free_block+0xbf/0x281 [btrfs]()
...
Call Trace:
[<ffffffff8104df86>] warn_slowpath_common+0x80/0x98
[<ffffffff8104dfb3>] warn_slowpath_null+0x15/0x17
[<ffffffffa0369c60>] btrfs_alloc_free_block+0xbf/0x281 [btrfs]
[<ffffffff810cbcb8>] ? __set_page_dirty_nobuffers+0xfe/0x108
[<ffffffffa035c040>] __btrfs_cow_block+0x118/0x3b5 [btrfs]
[<ffffffffa035c7ba>] btrfs_cow_block+0x103/0x14e [btrfs]
[<ffffffffa035e4c4>] btrfs_search_slot+0x249/0x6a4 [btrfs]
[<ffffffffa036d086>] btrfs_lookup_inode+0x2a/0x8a [btrfs]
[<ffffffffa03788b7>] btrfs_update_inode+0xaa/0x141 [btrfs]
[<ffffffffa036d7ec>] btrfs_save_ino_cache+0xea/0x202 [btrfs]
[<ffffffffa03a761e>] ? btrfs_update_reloc_root+0x17e/0x197 [btrfs]
[<ffffffffa0373867>] commit_fs_roots+0xaa/0x158 [btrfs]
[<ffffffffa03746a6>] btrfs_commit_transaction+0x405/0x731 [btrfs]
[<ffffffff810690df>] ? wake_up_bit+0x25/0x25
[<ffffffffa039d652>] ? btrfs_log_dentry_safe+0x43/0x51 [btrfs]
[<ffffffffa0381c5f>] btrfs_sync_file+0x16a/0x198 [btrfs]
[<ffffffff81122806>] ? mntput+0x21/0x23
[<ffffffff8112d150>] vfs_fsync_range+0x18/0x21
[<ffffffff8112d170>] vfs_fsync+0x17/0x19
[<ffffffff8112d316>] do_fsync+0x29/0x3e
[<ffffffff8112d348>] sys_fsync+0xb/0xf
[<ffffffff81468352>] system_call_fastpath+0x16/0x1b
Sometimes it causes BUG_ON() in the reservation code of the delayed inode
is triggered.
So we must reserve enough space for inode cache.
Note: If we can not reserve the enough space for inode cache, we will
give up writing out it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Since free space inodes now use normal checksumming we need to make sure to
account for their metadata use. So reserve metadata space, and then if we fail
to write out the metadata we can just release it, otherwise it will be freed up
when the io completes. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
|
|
wrap checking of filesystem 'closing' flag and fix a few missing memory
barriers.
Signed-off-by: David Sterba <dsterba@suse.cz>
|
|
This makes the inode map cache default to off until we
fix the overflow problem when the free space crcs don't fit
inside a single page.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
With xfstest 254 I can panic the box every time with the inode number caching
stuff on. This is because we clean the inodes out when we delete the subvolume,
but then we write out the inode cache which adds an inode to the subvolume inode
tree, and then when it gets evicted again the root gets added back on the dead
roots list and is deleted again, so we have a double free. To stop this from
happening just return 0 if refs is 0 (and we're not the tree root since tree
root always has refs of 0). With this fix 254 no longer panics. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This adds extra checks to make sure the inode map we are caching really
belongs to a FS root instead of a special relocation tree. It
prevents crashes during balancing operations.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
For a filesystem that has lots of files in it, the first time we mount
it with free ino caching support, it can take quite a long time to
setup the caching before we can create new files.
Here we fill the cache with [highest_ino, BTRFS_LAST_FREE_OBJECTID]
before we start the caching thread to search through the extent tree.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
inode_numbers
Conflicts:
fs/btrfs/extent-tree.c
fs/btrfs/free-space-cache.c
fs/btrfs/inode.c
fs/btrfs/tree-log.c
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This is similar to block group caching.
We dedicate a special inode in fs tree to save free ino cache.
At the very first time we create/delete a file after mount, the free ino
cache will be loaded from disk into memory. When the fs tree is commited,
the cache will be written back to disk.
To keep compatibility, we check the root generation against the generation
of the special inode when loading the cache, so the loading will fail
if the btrfs filesystem was mounted in an older kernel before.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
Currently btrfs stores the highest objectid of the fs tree, and it always
returns (highest+1) inode number when we create a file, so inode numbers
won't be reclaimed when we delete files, so we'll run out of inode numbers
as we keep create/delete files in 32bits machines.
This fixes it, and it works similarly to how we cache free space in block
cgroups.
We start a kernel thread to read the file tree. By scanning inode items,
we know which chunks of inode numbers are free, and we cache them in
an rb-tree.
Because we are searching the commit root, we have to carefully handle the
cross-transaction case.
The rb-tree is a hybrid extent+bitmap tree, so if we have too many small
chunks of inode numbers, we'll use bitmaps. Initially we allow 16K ram
of extents, and a bitmap will be used if we exceed this threshold. The
extents threshold is adjusted in runtime.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
This patch changes some BUG_ON() to the error return.
(but, most callers still use BUG_ON())
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The new back reference format does not allow reusing objectid of
deleted snapshot/subvol. So we use ++highest_objectid to allocate
objectid for new snapshot/subvol.
Now we use ++highest_objectid to allocate objectid for both new inode
and new snapshot/subvolume, so this patch removes 'find hole' code in
btrfs_find_free_objectid.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
A small warning popped up on ia64 because inode-map.c was comparing a
u64 object id with the ULL FIRST_FREE_OBJECTID. My first thought was
that all the OBJECTID constants should contain the u64 cast because
btrfs code deals entirely in u64s. But then I saw how large that was,
and figured I'd just fix the max() call.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
btrfs_init_path was initially used when the path objects were on the
stack. Now all the work is done by btrfs_alloc_path and btrfs_init_path
isn't required.
This patch removes it, and just uses kmem_cache_zalloc to zero out the object.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
There were many, most are fixed now. struct-funcs.c generates some warnings
but these are bogus.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
* Add an EXTENT_BOUNDARY state bit to keep the writepage code
from merging data extents that are in the process of being
relocated. This allows us to do accounting for them properly.
* The balancing code relocates data extents indepdent of the underlying
inode. The extent_map code was modified to properly account for
things moving around (invalidating extent_map caches in the inode).
* Don't take the drop_mutex in the create_subvol ioctl. It isn't
required.
* Fix walking of the ordered extent list to avoid races with sys_unlink
* Change the lock ordering rules. Transaction start goes outside
the drop_mutex. This allows btrfs_commit_transaction to directly
drop the relocation trees.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Orphan items use BTRFS_ORPHAN_OBJECTID (-5UUL) as key objectid. This
affects the find free objectid functions, inode objectid can easily
overflow after orphan file cleanup.
---
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Extent alloctions are still protected by a large alloc_mutex.
Objectid allocations are covered by a objectid mutex
Other btree operations are protected by a lock on individual btree nodes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
btrfs_find_free_objectid may return a used objectid due to arithmetic
underflow. This bug may happen when parameter 'root' is tree root, so
it may cause serious problems when creating snapshot or sub-volume.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Almost none of the files including module.h need to do so,
remove them.
Include sched.h in extent-tree.c to silence a warning about cond_resched()
being undeclared.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
