| Age | Commit message (Collapse) | Author |
|---|
|
If we truncate an uncompressed inline item, ram_bytes isn't updated to reflect
the new size. The fixe uses the size directly from the item header when
reading uncompressed inlines, and also fixes truncate to update the
size as it goes.
Reported-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
CC: stable@vger.kernel.org
|
|
logging csum
The performance of fsync dropped down suddenly sometimes, the main reason
of this problem was that we might only flush part dirty pages in a ordered
extent, then got that ordered extent, wait for the csum calcucation. But if
no task flushed the left part, we would wait until the flusher flushed them,
sometimes we need wait for several seconds, it made the performance drop
down suddenly. (On my box, it drop down from 56MB/s to 4-10MB/s)
This patch improves the above problem by flushing left dirty pages aggressively.
Test Environment:
CPU: 2CPU * 2Cores
Memory: 4GB
Partition: 20GB(HDD)
Test Command:
# sysbench --num-threads=8 --test=fileio --file-num=1 \
> --file-total-size=8G --file-block-size=32768 \
> --file-io-mode=sync --file-fsync-freq=100 \
> --file-fsync-end=no --max-requests=10000 \
> --file-test-mode=rndwr run
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
When writing to a file we drop existing file extent items that cover the
write range and then add a new file extent item that represents that write
range.
Before this change we were doing a tree lookup to remove the file extent
items, and then after we did another tree lookup to insert the new file
extent item.
Most of the time all the file extent items we need to drop are located
within a single leaf - this is the leaf where our new file extent item ends
up at. Therefore, in this common case just combine these 2 operations into
a single one.
By avoiding the second btree navigation for insertion of the new file extent
item, we reduce btree node/leaf lock acquisitions/releases, btree block/leaf
COW operations, CPU time on btree node/leaf key binary searches, etc.
Besides for file writes, this is an operation that happens for file fsync's
as well. However log btrees are much less likely to big as big as regular
fs btrees, therefore the impact of this change is smaller.
The following benchmark was performed against an SSD drive and a
HDD drive, both for random and sequential writes:
sysbench --test=fileio --file-num=4096 --file-total-size=8G \
--file-test-mode=[rndwr|seqwr] --num-threads=512 \
--file-block-size=8192 \ --max-requests=1000000 \
--file-fsync-freq=0 --file-io-mode=sync [prepare|run]
All results below are averages of 10 runs of the respective test.
** SSD sequential writes
Before this change: 225.88 Mb/sec
After this change: 277.26 Mb/sec
** SSD random writes
Before this change: 49.91 Mb/sec
After this change: 56.39 Mb/sec
** HDD sequential writes
Before this change: 68.53 Mb/sec
After this change: 69.87 Mb/sec
** HDD random writes
Before this change: 13.04 Mb/sec
After this change: 14.39 Mb/sec
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
This is the third step in bootstrapping the btrfs_find_item interface.
The function find_orphan_item(), in orphan.c, is similar to the two
functions already replaced by the new interface. It uses two parameters,
which are already present in the interface, and is nearly identical to
the function brought in in the previous patch.
Replace the two calls to find_orphan_item() with calls to
btrfs_find_item(), with the defined objectid and type that was used
internally by find_orphan_item(), a null path, and a null key. Add a
test for a null path to btrfs_find_item, and if it passes, allocate and
free the path. Finally, remove find_orphan_item().
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
Btrfs has always had these filler extent data items for holes in inodes. This
has made somethings very easy, like logging hole punches and sending hole
punches. However for large holey files these extent data items are pure
overhead. So add an incompatible feature to no longer add hole extents to
reduce the amount of metadata used by these sort of files. This has a few
changes for logging and send obviously since they will need to detect holes and
log/send the holes if there are any. I've tested this thoroughly with xfstests
and it doesn't cause any issues with and without the incompat format set.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
If we fsync, seek and write, rename and then fsync again we will lose the
modified hole extent because the rename will drop all of the modified extents
since we didn't do the fast search. We need to only drop the modified extents
if we didn't do the fast search and we were logging the entire inode as we don't
need them anymore, otherwise this is being premature. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
If we rename a file that is already in the log and we fsync again we will lose
the new name. This is because we just log the inode update and not the new ref.
To fix this we just need to check if we are logging the new name of the inode
and copy all the metadata instead of just updating the inode itself. With this
patch my testcase now passes. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
Use WARN_ON()'s return value in place of WARN_ON(1) for cleaner source
code that outputs a more descriptive warnings. Also fix the styling
warning of redundant braces that came up as a result of this fix.
Signed-off-by: Dulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
If we get any error while doing a dir index/item lookup in the
log tree, we were always unlinking the corresponding inode in
the subvolume. It makes sense to unlink only if the lookup failed
to find the dir index/item, which corresponds to NULL or -ENOENT,
and not when other errors happen (like a transient -ENOMEM or -EIO).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
We were setting the csums search offset and length to the right values if
the extent is compressed, but later on right before doing the csums lookup
we were overriding these two parameters regardless of compression being
set or not for the extent.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
Originally, we introduced scrub_super_lock to synchronize
tree log code with scrubbing super.
However we can replace scrub_super_lock with device_list_mutex,
because writing super will hold this mutex, this will reduce an extra
lock holding when writing supers in sync log code.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
fs/btrfs/compat.h only contained trivial macro wrappers of drop_nlink()
and inc_nlink(). This doesn't belong in mainline.
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
Avoid repeated tree searches by processing all inode ref items in
a leaf at once instead of processing one at a time, followed by a
path release and a tree search for a key with a decremented offset.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
In add_inode_ref() function:
Initializes local pointers.
Reduces the logical condition with the __add_inode_ref() return
value by using only one 'goto out'.
Centralizes the exiting, ensuring the freeing of all used memory.
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
The btrfs_insert_empty_item() function doesn't modify its
key argument.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
I added an assert to make sure we were looking up aligned offsets for csums and
I tripped it when running xfstests. This is because log_one_extent was checking
if block_start == 0 for a hole instead of EXTENT_MAP_HOLE. This worked out fine
in practice it seems, but it adds a lot of extra work that is uneeded. With
this fix I'm no longer tripping my assert. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
On error we will wait and free the tree log at unmount without a transaction.
This means that the actual freeing of the blocks doesn't happen which means we
complain about space leaks on unmount. So to fix this just skip the transaction
specific cleanup part of the tree log free'ing if we don't have a transaction
and that way we can free up our reserved space and our counters stay happy.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
In tree-log.c:btrfs_log_inode(), we keep calling btrfs_search_forward()
until it returns a key whose objectid is higher than our inode or until
the key's type is higher than our maximum allowed type.
At the end of the loop, we increment our mininum search key's objectid
and type regardless of our desired target objectid and maximum desired
type, which causes another loop iteration that will call again
btrfs_search_forward() just to figure out we've gone beyond our maximum
key and exit the loop. Therefore while incrementing our minimum key,
don't do it blindly and exit the loop immiediately if the next search
key's objectid or type is beyond what we seek.
Also after incrementing the type, set the key's offset to 0, which was
missing and could make us loose some of the inode's items.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
It is not used for anything.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
So if we have dir_index items in the log that means we also have the inode item
as well, which means that the inode's i_size is correct. However when we
process dir_index'es we call btrfs_add_link() which will increase the
directory's i_size for the new entry. To fix this we need to just set the dir
items i_size to 0, and then as we find dir_index items we adjust the i_size.
btrfs_add_link() will do it for new entries, and if the entry already exists we
can just add the name_len to the i_size ourselves. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
A user reported a bug where his log would not replay because he was getting
-EEXIST back. This was because he had a file moved into a directory that was
logged. What happens is the file had a lower inode number, and so it is
processed first when replaying the log, and so we add the inode ref in for the
directory it was moved to. But then we process the directories DIR_INDEX item
and try to add the inode ref for that inode and it fails because we already
added it when we replayed the inode. To solve this problem we need to just
process any DIR_INDEX items we have in the log first so this all is taken care
of, and then we can replay the rest of the items. With this patch my reproducer
can remount the file system properly instead of erroring out. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
If you just create a directory and then fsync that directory and then pull the
power plug you will come back up and the directory will not be there. That is
because we won't actually create directories if we've logged files inside of
them since they will be created on replay, but in this check we will set our
logged_trans of our current directory if it happens to be a directory, making us
think it doesn't need to be logged. Fix the logic to only do this to parent
directories. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
tree-log.c was ignoring the return value from btrfs_run_delayed_items()
in several places.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
In tree-log.c:replay_one_name(), if memory allocation for
the name fails, ensure we iput the dir inode we got before
before we return.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
The ceph guys tripped over this bug where we were still holding onto the
original path that we used to copy the inode with when logging. This is based
on Chris's fix which was reported to fix the problem. We need to drop the paths
in two cases anyway so just move the drop up so that we don't have duplicate
code. Thanks,
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
With non-mixed block groups we replay the logs before we're allowed to do any
writes, so we get away with not pinning/removing the data extents until right
when we replay them. However with mixed block groups we allocate out of the
same pool, so we could easily allocate a metadata block that was logged in our
tree log. To deal with this we just need to notice that we have mixed block
groups and do the normal excluding/removal dance during the pin stage of the log
replay and that way we don't allocate metadata blocks from areas we have logged
data extents. With this patch we now pass xfstests generic/311 with mixed
block groups turned on. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
Before applying this patch, we flushed the log tree of the fs/file
tree firstly, and then flushed the log root tree. It is ineffective,
especially on the hard disk. This patch improved this problem by wrapping
the above two flushes by the same blk_plug.
By test, the performance of the sync write went up ~60%(2.9MB/s -> 4.6MB/s)
on my scsi disk whose disk buffer was enabled.
Test step:
# mkfs.btrfs -f -m single <disk>
# mount <disk> <mnt>
# dd if=/dev/zero of=<mnt>/file0 bs=32K count=1024 oflag=sync
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
EXTREF is treated same as REF, so we can make the code tidy.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
There are several functions whose code is similar, such as
btrfs_find_last_root()
btrfs_read_fs_root_no_radix()
Besides that, some functions are invoked twice, it is unnecessary,
for example, we are sure that all roots which is found in
btrfs_find_orphan_roots()
have their orphan items, so it is unnecessary to check the orphan
item again.
So cleanup it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
Big patch, but all it does is add statics to functions which
are in fact static, then remove the associated dead-code fallout.
removed functions:
btrfs_iref_to_path()
__btrfs_lookup_delayed_deletion_item()
__btrfs_search_delayed_insertion_item()
__btrfs_search_delayed_deletion_item()
find_eb_for_page()
btrfs_find_block_group()
range_straddles_pages()
extent_range_uptodate()
btrfs_file_extent_length()
btrfs_scrub_cancel_devid()
btrfs_start_transaction_lflush()
btrfs_print_tree() is left because it is used for debugging.
btrfs_start_transaction_lflush() and btrfs_reada_detach() are
left for symmetry.
ulist.c functions are left, another patch will take care of those.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
There were a whole bunch and I was doing it for other things. I haven't tested
these error paths but at the very least this is better than panicing. I've only
left 2 BUG_ON()'s since they are logic errors and I want to replace them with a
ASSERT framework that we can compile out for production users. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
So everybody who got hit by my fsync bug will still continue to hit this
BUG_ON() in the free space cache, which is pretty heavy handed. So I took a
file system that had this bug and fixed up all the BUG_ON()'s and leaks that
popped up when I tried to mount a broken file system like this. With this patch
we just fail to mount instead of panicing. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
We need to check the return value of the commit in case something goes wrong,
otherwise we could end up going down the line and doing more stuff (like orphan
cleanup) before we notice we should have errored out. We need to do this before
we free up the log_tree_root since the caller will handle all of that. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
This work is done by btrfs_free_path() anyway so there's no need for this
duplicate work. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
Argument 'trans' is not used in btrfs_extend_item().
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
If argument 'trans' is unnecessary in the function where
fixup_low_keys() is called, 'trans' is deleted.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
A user sent me a btrfs-image of a file system that was panicing on mount during
the log recovery. I had originally thought these problems were from a bug in
the free space cache code, but that was just a symptom of the problem. The
problem is if your application does something like this
[prealloc][prealloc][prealloc]
the internal extent maps will merge those all together into one extent map, even
though on disk they are 3 separate extents. So if you go to write into one of
these ranges the extent map will be right since we use the physical extent when
doing the write, but when we log the extents they will use the wrong sizes for
the remainder prealloc space. If this doesn't happen to trip up the free space
cache (which it won't in a lot of cases) then you will get bogus entries in your
extent tree which will screw stuff up later. The data and such will still work,
but everything else is broken. This patch fixes this by not allowing extents
that are on the modified list to be merged. This has the side effect that we
are no longer adding everything to the modified list all the time, which means
we now have to call btrfs_drop_extents every time we log an extent into the
tree. So this allows me to drop all this speciality code I was using to get
around calling btrfs_drop_extents. With this patch the testcase I've created no
longer creates a bogus file system after replaying the log. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
When logging changed extents I was logging ram_bytes as the current length,
which isn't correct, it's supposed to be the ram bytes of the original extent.
This is for compression where even if we split the extent we need to know the
ram bytes so when we uncompress the extent we know how big it will be. This was
still working out right with compression for some reason but I think we were
getting lucky. It was definitely off for prealloc which is why I noticed it,
btrfsck was complaining about it. With this patch btrfsck no longer complains
after a log replay. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
While trying to track down a tree log replay bug I noticed that fsck was always
complaining about nbytes not being right for our fsynced file. That is because
the new fsync stuff doesn't wait for ordered extents to complete, so the inodes
nbytes are not necessarily updated properly when we log it. So to fix this we
need to set nbytes to whatever it is on the inode that is on disk, so when we
replay the extents we can just add the bytes that are being added as we replay
the extent. This makes it work for the case that we have the wrong nbytes or
the case that we logged everything and nbytes is actually correct. With this
I'm no longer getting nbytes errors out of btrfsck.
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
|
We need to inc the nlink of deleted entries when running replay so we can do the
unlink on the fs_root and get everything cleaned up and then have the orphan
cleanup do the right thing. The problem is inc_nlink complains about this, even
thought it still does the right thing. So use set_nlink() if our i_nlink is 0
to keep users from seeing the warnings during log replay. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
Apparently when we do inline extents we allow the data to overlap the last chunk
of the btrfs_file_extent_item, which means that we can possibly have a
btrfs_file_extent_item that isn't actually as large as a btrfs_file_extent_item.
This messes with us when we try to overwrite the extent when logging new extents
since we expect for it to be the right size. To fix this just delete the item
and try to do the insert again which will give us the proper sized
btrfs_file_extent_item. This fixes a panic where map_private_extent_buffer
would blow up because we're trying to write past the end of the leaf. Thanks,
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
When we abort a transaction while fsyncing, we'll skip freeing log roots
part of committing a transaction, which leads to memory leak.
This adds a 'free log roots' in putting super when no more users hold
references on log roots, so it's safe and clean.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
Though most of the btrfs codes are using ALIGN macro for page alignment,
there are still some codes using open-coded alignment like the
following:
------
u64 mask = ((u64)root->stripesize - 1);
u64 ret = (val + mask) & ~mask;
------
Or even hidden one:
------
num_bytes = (end - start + blocksize) & ~(blocksize - 1);
------
Sometimes these open-coded alignment is not so easy to understand for
newbie like me.
This commit changes the open-coded alignment to the ALIGN macro for a
better readability.
Also there is a previous patch from David Sterba with similar changes,
but the patch is for 3.2 kernel and seems not merged.
http://www.spinics.net/lists/linux-btrfs/msg12747.html
Cc: David Sterba <dave@jikos.cz>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
The entry point at the defrag ioctl always sets "cache only" to 0;
the codepaths haven't run for a long time as far as I can
tell. Chris says they're dead code, so remove them.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
Argument 'trans' is not used any more.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
Since we don't actually copy the extent information from the source tree in
the fast case we don't need to wait for ordered io to be completed in order
to fsync, we just need to wait for the io to be completed. So when we're
logging our file just attach all of the ordered extents to the log, and then
when the log syncs just wait for IO_DONE on the ordered extents and then
write the super. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
For compressed extents, the range of checksum is covered by disk length,
and the disk length is different with ram length, so we need to use disk
length instead to get us the right checksum.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
We drop the extent map tree lock while we're logging extents, so somebody
could come in and merge another extent into this one and screw up our
logging, or they could even remove us from the list which would keep us from
logging the extent or freeing our ref on it, so we need to make sure to not
clear LOGGING until after the extent is logged, and then we can merge it to
adjacent extents. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
If we are syncing over and over the overhead of doing all those maps in
fill_inode_item and log_changed_extents really starts to hurt, so use map
tokens so we can avoid all the extra mapping. Since the token maps from our
offset to the end of the page make sure to set the first thing in the item
first so we really only do one map. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
|
