summaryrefslogtreecommitdiffstats
path: root/fs/buffer.c
AgeCommit message (Collapse)Author
2014-06-04mm: non-atomically mark page accessed during page cache allocation where ↵Mel Gorman
possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04fs: buffer: do not use unnecessary atomic operations when discarding buffersMel Gorman
Discarding buffers uses a bunch of atomic operations when discarding buffers because ...... I can't think of a reason. Use a cmpxchg loop to clear all the necessary flags. In most (all?) cases this will be a single atomic operations. [akpm@linux-foundation.org: move BUFFER_FLAGS_DISCARD into the .c file] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04fs/buffer.c: remove block_write_full_page_endio()Matthew Wilcox
The last in-tree caller of block_write_full_page_endio() was removed in January 2013. It's time to remove the EXPORT_SYMBOL, which leaves block_write_full_page() as the only caller of block_write_full_page_endio(), so inline block_write_full_page_endio() into block_write_full_page(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dheeraj Reddy <dheeraj.reddy@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-01switch ->is_partially_uptodate() to saner argumentsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-20Merge branch 'master' into for-nextJiri Kosina
2014-02-19treewide: Fix typo in Documentation/DocBookMasanari Iida
This patch fix spelling typo in Documentation/DocBook. It is because .html and .xml files are generated by make htmldocs, I have to fix a typo within the source files. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-06mm: __set_page_dirty uses spin_lock_irqsave instead of spin_lock_irqKOSAKI Motohiro
To use spin_{un}lock_irq is dangerous if caller disabled interrupt. During aio buffer migration, we have a possibility to see the following call stack. aio_migratepage [disable interrupt] migrate_page_copy clear_page_dirty_for_io set_page_dirty __set_page_dirty_buffers __set_page_dirty spin_lock_irq This mean, current aio migration is a deadlockable. spin_lock_irqsave is a safer alternative and we should use it. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by: David Rientjes rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-03block: Replace __this_cpu_ptr with raw_cpu_ptrChristoph Lameter
__this_cpu_ptr is being phased out. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-23block: Abstract out bvec iteratorKent Overstreet
Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-16fs: buffer: move allocation failure loop into the allocatorJohannes Weiner
Buffer allocation has a very crude indefinite loop around waking the flusher threads and performing global NOFS direct reclaim because it can not handle allocation failures. The most immediate problem with this is that the allocation may fail due to a memory cgroup limit, where flushers + direct reclaim might not make any progress towards resolving the situation at all. Because unlike the global case, a memory cgroup may not have any cache at all, only anonymous pages but no swap. This situation will lead to a reclaim livelock with insane IO from waking the flushers and thrashing unrelated filesystem cache in a tight loop. Use __GFP_NOFAIL allocations for buffers for now. This makes sure that any looping happens in the page allocator, which knows how to orchestrate kswapd, direct reclaim, and the flushers sensibly. It also allows memory cgroups to detect allocations that can't handle failure and will allow them to ultimately bypass the limit if reclaim can not make progress. Reported-by: azurIt <azurit@pobox.sk> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm: vmscan: take page buffers dirty and locked state into accountMel Gorman
Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-21mm: change invalidatepage prototype to accept lengthLukas Czerner
Currently there is no way to truncate partial page where the end truncate point is not at the end of the page. This is because it was not needed and the functionality was enough for file system truncate operation to work properly. However more file systems now support punch hole feature and it can benefit from mm supporting truncating page just up to the certain point. Specifically, with this functionality truncate_inode_pages_range() can be changed so it supports truncating partial page at the end of the range (currently it will BUG_ON() if 'end' is not at the end of the page). This commit changes the invalidatepage() address space operation prototype to accept range to be invalidated and update all the instances for it. We also change the block_invalidatepage() in the same way and actually make a use of the new length argument implementing range invalidation. Actual file system implementations will follow except the file systems where the changes are really simple and should not change the behaviour in any way .Implementation for truncate_page_range() which will be able to accept page unaligned ranges will follow as well. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com>
2013-05-08Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
2013-05-01Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Mostly performance and bug fixes, plus some cleanups. The one new feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which allows installation of a hidden inode designed for boot loaders." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits) ext4: fix type-widening bug in inode table readahead code ext4: add check for inodes_count overflow in new resize ioctl ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG ext4: fix online resizing for ext3-compat file systems jbd2: trace when lock_buffer in do_get_write_access takes a long time ext4: mark metadata blocks using bh flags buffer: add BH_Prio and BH_Meta flags ext4: mark all metadata I/O with REQ_META ext4: fix readdir error in case inline_data+^dir_index. ext4: fix readdir error in the case of inline_data+dir_index jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset ext4: mext_insert_extents should update extent block checksum ext4: move quota initialization out of inode allocation transaction ext4: reserve xattr index for Rich ACL support jbd2: reduce journal_head size ext4: clear buffer_uninit flag when submitting IO ext4: use io_end for multiple bios ext4: make ext4_bio_write_page() use BH_Async_Write flags ext4: Use kstrtoul() instead of parse_strtoul() ext4: defragmentation code cleanup ...
2013-04-29fs/buffer.c: remove unnecessary init operation after allocating buffer_head.majianpeng
bh allocation uses kmem_cache_zalloc() so we needn't call 'init_buffer(bh, NULL, NULL)' and perform other set-zero-operations. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29mm: make snapshotting pages for stable writes a per-bio operationDarrick J. Wong
Walking a bio's page mappings has proved problematic, so create a new bio flag to indicate that a bio's data needs to be snapshotted in order to guarantee stable pages during writeback. Next, for the one user (ext3/jbd) of snapshotting, hook all the places where writes can be initiated without PG_writeback set, and set BIO_SNAP_STABLE there. We must also flag journal "metadata" bios for stable writeout, since file data can be written through the journal. Finally, the MS_SNAP_STABLE mount flag (only used by ext3) is now superfluous, so get rid of it. [akpm@linux-foundation.org: rename _submit_bh()'s `flags' to `bio_flags', delobotomize the _submit_bh declaration] [akpm@linux-foundation.org: teeny cleanup] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-20buffer: add BH_Prio and BH_Meta flagsTheodore Ts'o
Add buffer_head flags so that buffer cache writebacks can be marked with the the appropriate request flags, so that metadata blocks can be marked appropriately in blktrace. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-03-23block: Remove bi_idx referencesKent Overstreet
For immutable bvecs, all bi_idx usage needs to be audited - so here we're removing all the unnecessary uses. Most of these are places where it was being initialized on a bio that was just allocated, a few others are conversions to standard macros. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk>
2013-02-28Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block IO core bits from Jens Axboe: "Below are the core block IO bits for 3.9. It was delayed a few days since my workstation kept crashing every 2-8h after pulling it into current -git, but turns out it is a bug in the new pstate code (divide by zero, will report separately). In any case, it contains: - The big cfq/blkcg update from Tejun and and Vivek. - Additional block and writeback tracepoints from Tejun. - Improvement of the should sort (based on queues) logic in the plug flushing. - _io() variants of the wait_for_completion() interface, using io_schedule() instead of schedule() to contribute to io wait properly. - Various little fixes. You'll get two trivial merge conflicts, which should be easy enough to fix up" Fix up the trivial conflicts due to hlist traversal cleanups (commit b67bfe0d42ca: "hlist: drop the node parameter from iterators"). * 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits) block: remove redundant check to bd_openers() block: use i_size_write() in bd_set_size() cfq: fix lock imbalance with failed allocations drivers/block/swim3.c: fix null pointer dereference block: don't select PERCPU_RWSEM block: account iowait time when waiting for completion of IO request sched: add wait_for_completion_io[_timeout] writeback: add more tracepoints block: add block_{touch|dirty}_buffer tracepoint buffer: make touch_buffer() an exported function block: add @req to bio_{front|back}_merge tracepoints block: add missing block_bio_complete() tracepoint block: Remove should_sort judgement when flush blk_plug block,elevator: use new hashtable implementation cfq-iosched: add hierarchical cfq_group statistics cfq-iosched: collect stats from dead cfqgs cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats() blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock block: RCU free request_queue blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge() ...
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-23fs/buffer.c: change type of max_buffer_heads to unsigned longZhang Yanfei
max_buffer_heads is calculated from nr_free_buffer_pages(), so change its type to unsigned long in case of overflow. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-21mm: only enforce stable page writes if the backing device requires itDarrick J. Wong
Create a helper function to check if a backing device requires stable page writes and, if so, performs the necessary wait. Then, make it so that all points in the memory manager that handle making pages writable use the helper function. This should provide stable page write support to most filesystems, while eliminating unnecessary waiting for devices that don't require the feature. Before this patchset, all filesystems would block, regardless of whether or not it was necessary. ext3 would wait, but still generate occasional checksum errors. The network filesystems were left to do their own thing, so they'd wait too. After this patchset, all the disk filesystems except ext3 and btrfs will wait only if the hardware requires it. ext3 (if necessary) snapshots pages instead of blocking, and btrfs provides its own bdi so the mm will never wait. Network filesystems haven't been touched, so either they provide their own stable page guarantees or they don't block at all. The blocking behavior is back to what it was before 3.0 if you don't have a disk requiring stable page writes. Here's the result of using dbench to test latency on ext2: 3.8.0-rc3: Operation Count AvgLat MaxLat ---------------------------------------- WriteX 109347 0.028 59.817 ReadX 347180 0.004 3.391 Flush 15514 29.828 287.283 Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms 3.8.0-rc3 + patches: WriteX 105556 0.029 4.273 ReadX 335004 0.005 4.112 Flush 14982 30.540 298.634 Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms As you can see, the maximum write latency drops considerably with this patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave similarly, but see the cover letter for those results. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-14vfs: add missing virtual cache flush after editing partial pagesLinus Torvalds
Andrew Morton pointed this out a month ago, and then I completely forgot about it. If we read a partial last page of a block device, we will zero out the end of the page, but since that page can then be mapped into user space, we should also make sure to flush the cache on architectures that have virtual caches. We have the flush_dcache_page() function for this, so use it. Now, in practice this really never matters, because nobody sane uses virtual caches to begin with, and they largely exist on old broken RISC arhitectures. And even if you did run on one of those obsolete CPU's, the whole "mmap and access the last partial page of a block device" behavior probably doesn't actually exist. The normal IO functions (read/write) will never see the zeroed-out part of the page that migth not be coherent in the cache, because they honor the size of the device. So I'm marking this for stable (3.7 only), but I'm not sure anybody will ever care. Pointed-out-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org # 3.7 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-14block: add block_{touch|dirty}_buffer tracepointTejun Heo
The former is triggered from touch_buffer() and the latter mark_buffer_dirty(). This is part of tracepoint additions to improve visiblity into dirtying / writeback operations for io tracer and userland. v2: Transformed writeback_dirty_buffer to block_dirty_buffer and made it share TP definition with block_touch_buffer. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-01-14buffer: make touch_buffer() an exported functionTejun Heo
We want to add a trace point to touch_buffer() but macros and inline functions defined in header files can't have tracing points. Move touch_buffer() to fs/buffer.c and make it a proper function. The new exported function is also declared inline. As most uses of touch_buffer() are inside buffer.c with nilfs2 as the only other user, the effect of this change should be negligible. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-12-12fs/buffer.c: remove redundant initialization in alloc_page_buffers()Yan Hong
buffer_head comes from kmem_cache_zalloc(), no need to zero its fields. Signed-off-by: Yan Hong <clouds.yan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12fs/buffer.c: do not inline exported functionYan Hong
It makes no sense to inline an exported function. Signed-off-by: Yan Hong <clouds.yan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11mm: redefine address_space.assoc_mappingRafael Aquini
Overhaul struct address_space.assoc_mapping renaming it to address_space.private_data and its type is redefined to void*. By this approach we consistently name the .private_* elements from struct address_space as well as allow extended usage for address_space association with other data structures through ->private_data. Also, all users of old ->assoc_mapping element are converted to reflect its new name and type change (->private_data). Signed-off-by: Rafael Aquini <aquini@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-05vfs: clear to the end of the buffer on partial buffer readsDan Carpenter
READ is zero so the "rw & READ" test is always false. The intended test was "((rw & RW_MASK) == READ)". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-04vfs: avoid "attempt to access beyond end of device" warningsLinus Torvalds
The block device access simplification that avoided accessing the (racy) block size information (commit bbec0270bdd8: "blkdev_max_block: make private to fs/buffer.c") no longer checks the maximum block size in the block mapping path. That was _almost_ as simple as just removing the code entirely, because the readers and writers all check the size of the device anyway, so under normal circumstances it "just worked". However, the block size may be such that the end of the device may straddle one single buffer_head. At which point we may still want to access the end of the device, but the buffer we use to access it partially extends past the end. The 'bd_set_size()' function intentionally sets the block size to avoid this, but mounting the device - or setting the block size by hand to some other value - can modify that block size. So instead, teach 'submit_bh()' about the special case of the buffer head straddling the end of the device, and turning such an access into a smaller IO access, avoiding the problem. This, btw, also means that unlike before, we can now access the whole device regardless of device block size setting. So now, even if the device size is only 512-byte aligned, we can read and write even the last sector even when having a much bigger block size for accessing the rest of the device. So with this, we could now get rid of the 'bd_set_size()' block size code entirely - resulting in faster IO for the common case - but that would be a separate patch. Reported-and-tested-by: Romain Francoise <romain@orebokech.com> Reporeted-and-tested-by: Meelis Roos <mroos@linux.ee> Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-29blkdev_max_block: make private to fs/buffer.cLinus Torvalds
We really don't want to look at the block size for the raw block device accesses in fs/block-dev.c, because it may be changing from under us. So get rid of the max_block logic entirely, since the caller should already have done it anyway. That leaves the only user of this function in fs/buffer.c, so move the whole function there and make it static. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-29fs/buffer.c: make block-size be per-page and protected by the page lockLinus Torvalds
This makes the buffer size handling be a per-page thing, which allows us to not have to worry about locking too much when changing the buffer size. If a page doesn't have buffers, we still need to read the block size from the inode, but we can do that with ACCESS_ONCE(), so that even if the size is changing, we get a consistent value. This doesn't convert all functions - many of the buffer functions are used purely by filesystems, which in turn results in the buffer size being fixed at mount-time. So they don't have the same consistency issues that the raw device access can have. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "The big new feature added this time is supporting online resizing using the meta_bg feature. This allows us to resize file systems which are greater than 16TB. In addition, the speed of online resizing has been improved in general. We also fix a number of races, some of which could lead to deadlocks, in ext4's Asynchronous I/O and online defrag support, thanks to good work by Dmitry Monakhov. There are also a large number of more minor bug fixes and cleanups from a number of other ext4 contributors, quite of few of which have submitted fixes for the first time." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (69 commits) ext4: fix ext4_flush_completed_IO wait semantics ext4: fix mtime update in nodelalloc mode ext4: fix ext_remove_space for punch_hole case ext4: punch_hole should wait for DIO writers ext4: serialize truncate with owerwrite DIO workers ext4: endless truncate due to nonlocked dio readers ext4: serialize unlocked dio reads with truncate ext4: serialize dio nonlocked reads with defrag workers ext4: completed_io locking cleanup ext4: fix unwritten counter leakage ext4: give i_aiodio_unwritten a more appropriate name ext4: ext4_inode_info diet ext4: convert to use leXX_add_cpu() ext4: ext4_bread usage audit fs: reserve fallocate flag codepoint ext4: remove redundant offset check in mext_check_arguments() ext4: don't clear orphan list on ro mount with errors jbd2: fix assertion failure in commit code due to lacking transaction credits ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails ext4: enable FITRIM ioctl on bigalloc file system ...
2012-09-30ext4: fix mtime update in nodelalloc modeTheodore Ts'o
Commits 5e8830dc85d0 and 41c4d25f78c0 introduced a regression into v3.6-rc1 for ext4 in nodealloc mode, such that mtime updates would not take place for files modified via mmap if the page was already in the page cache. This would also affect ext3 file systems mounted using the ext4 file system driver. The problem was that ext4_page_mkwrite() had a shortcut which would avoid calling __block_page_mkwrite() under some circumstances, and the above two commit transferred the responsibility of calling file_update_time() to __block_page_mkwrite --- which woudln't get called in some circumstances. Since __block_page_mkwrite() only has three callers, block_page_mkwrite(), ext4_page_mkwrite, and nilfs_page_mkwrite(), the best way to solve this is to move the responsibility for calling file_update_time() to its caller. This problem was found via xfstests #215 with a file system mounted with -o nodelalloc. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: stable@vger.kernel.org
2012-08-23block: replace __getblk_slow misfix by grow_dev_page fixHugh Dickins
Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31fs: Protect write paths by sb_start_write - sb_end_writeJan Kara
There are several entry points which dirty pages in a filesystem. mmap (handled by block_page_mkwrite()), buffered write (handled by __generic_file_aio_write()), splice write (generic_file_splice_write), truncate, and fallocate (these can dirty last partial page - handled inside each filesystem separately). Protect these places with sb_start_write() and sb_end_write(). ->page_mkwrite() calls are particularly complex since they are called with mmap_sem held and thus we cannot use standard sb_start_write() due to lock ordering constraints. We solve the problem by using a special freeze protection sb_start_pagefault() which ranks below mmap_sem. BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31fs: Push file_update_time() into __block_page_mkwrite()Jan Kara
Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-13block: fix infinite loop in __getblk_slowJeff Moyer
Commit 080399aaaf35 ("block: don't mark buffers beyond end of disk as mapped") exposed a bug in __getblk_slow that causes mount to hang as it loops infinitely waiting for a buffer that lies beyond the end of the disk to become uptodate. The problem was initially reported by Torsten Hilbrich here: https://lkml.org/lkml/2012/6/18/54 and also reported independently here: http://www.sysresccd.org/forums/viewtopic.php?f=13&t=4511 and then Richard W.M. Jones and Marcos Mello noted a few separate bugzillas also associated with the same issue. This patch has been confirmed to fix: https://bugzilla.redhat.com/show_bug.cgi?id=835019 The main problem is here, in __getblk_slow: for (;;) { struct buffer_head * bh; int ret; bh = __find_get_block(bdev, block, size); if (bh) return bh; ret = grow_buffers(bdev, block, size); if (ret < 0) return NULL; if (ret == 0) free_more_memory(); } __find_get_block does not find the block, since it will not be marked as mapped, and so grow_buffers is called to fill in the buffers for the associated page. I believe the for (;;) loop is there primarily to retry in the case of memory pressure keeping grow_buffers from succeeding. However, we also continue to loop for other cases, like the block lying beond the end of the disk. So, the fix I came up with is to only loop when grow_buffers fails due to memory allocation issues (return value of 0). The attached patch was tested by myself, Torsten, and Rich, and was found to resolve the problem in call cases. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Reported-and-Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Josh Boyer <jwboyer@redhat.com> Cc: Stable <stable@vger.kernel.org> # 3.0+ [ Jens is on vacation, taking this directly - Linus ] -- Stable Notes: this patch requires backport to 3.0, 3.2 and 3.3. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30fs: Move bh_cachep to the __read_mostly sectionShai Fultheim
bh_cachep is only written to once on initialization, so move it to the __read_mostly section. Signed-off-by: Shai Fultheim <shai@scalemp.com> Signed-off-by: Vlad Zolotarov <vlad@scalemp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-11block: don't mark buffers beyond end of disk as mappedJeff Moyer
Hi, We have a bug report open where a squashfs image mounted on ppc64 would exhibit errors due to trying to read beyond the end of the disk. It can easily be reproduced by doing the following: [root@ibm-p750e-02-lp3 ~]# ls -l install.img -rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img [root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test [root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null dd: reading `/dev/loop0': Input/output error 277376+0 records in 277376+0 records out 142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s In dmesg, you'll find the following: squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 43.106012] attempt to access beyond end of device [ 43.106029] loop0: rw=0, want=277410, limit=277408 [ 43.106039] Buffer I/O error on device loop0, logical block 138704 [ 43.106053] attempt to access beyond end of device [ 43.106057] loop0: rw=0, want=277412, limit=277408 [ 43.106061] Buffer I/O error on device loop0, logical block 138705 [ 43.106066] attempt to access beyond end of device [ 43.106070] loop0: rw=0, want=277414, limit=277408 [ 43.106073] Buffer I/O error on device loop0, logical block 138706 [ 43.106078] attempt to access beyond end of device [ 43.106081] loop0: rw=0, want=277416, limit=277408 [ 43.106085] Buffer I/O error on device loop0, logical block 138707 [ 43.106089] attempt to access beyond end of device [ 43.106093] loop0: rw=0, want=277418, limit=277408 [ 43.106096] Buffer I/O error on device loop0, logical block 138708 [ 43.106101] attempt to access beyond end of device [ 43.106104] loop0: rw=0, want=277420, limit=277408 [ 43.106108] Buffer I/O error on device loop0, logical block 138709 [ 43.106112] attempt to access beyond end of device [ 43.106116] loop0: rw=0, want=277422, limit=277408 [ 43.106120] Buffer I/O error on device loop0, logical block 138710 [ 43.106124] attempt to access beyond end of device [ 43.106128] loop0: rw=0, want=277424, limit=277408 [ 43.106131] Buffer I/O error on device loop0, logical block 138711 [ 43.106135] attempt to access beyond end of device [ 43.106139] loop0: rw=0, want=277426, limit=277408 [ 43.106143] Buffer I/O error on device loop0, logical block 138712 [ 43.106147] attempt to access beyond end of device [ 43.106151] loop0: rw=0, want=277428, limit=277408 [ 43.106154] Buffer I/O error on device loop0, logical block 138713 [ 43.106158] attempt to access beyond end of device [ 43.106162] loop0: rw=0, want=277430, limit=277408 [ 43.106166] attempt to access beyond end of device [ 43.106169] loop0: rw=0, want=277432, limit=277408 ... [ 43.106307] attempt to access beyond end of device [ 43.106311] loop0: rw=0, want=277470, limit=2774 Squashfs manages to read in the end block(s) of the disk during the mount operation. Then, when dd reads the block device, it leads to block_read_full_page being called with buffers that are beyond end of disk, but are marked as mapped. Thus, it would end up submitting read I/O against them, resulting in the errors mentioned above. I fixed the problem by modifying init_page_buffers to only set the buffer mapped if it fell inside of i_size. Cheers, Jeff Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Nick Piggin <npiggin@kernel.dk> -- Changes from v1->v2: re-used max_block, as suggested by Nick Piggin. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-25fs/buffer.c: remove BUG() in possible but rare conditionGlauber Costa
While stressing the kernel with with failing allocations today, I hit the following chain of events: alloc_page_buffers(): bh = alloc_buffer_head(GFP_NOFS); if (!bh) goto no_grow; <= path taken grow_dev_page(): bh = alloc_page_buffers(page, size, 0); if (!bh) goto failed; <= taken, consequence of the above and then the failed path BUG()s the kernel. The failure is inserted a litte bit artificially, but even then, I see no reason why it should be deemed impossible in a real box. Even though this is not a condition that we expect to see around every time, failed allocations are expected to be handled, and BUG() sounds just too much. As a matter of fact, grow_dev_page() can return NULL just fine in other circumstances, so I propose we just remove it, then. Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28fs: only send IPI to invalidate LRU BH when neededGilad Ben-Yossef
In several code paths, such as when unmounting a file system (but not only) we send an IPI to ask each cpu to invalidate its local LRU BHs. For multi-cores systems that have many cpus that may not have any LRU BH because they are idle or because they have not performed any file system accesses since last invalidation (e.g. CPU crunching on high perfomance computing nodes that write results to shared memory or only using filesystems that do not use the bh layer.) This can lead to loss of performance each time someone switches the KVM (the virtual keyboard and screen type, not the hypervisor) if it has a USB storage stuck in. This patch attempts to only send an IPI to cpus that have LRU BH. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-28fs: reduce the use of module.h wherever possiblePaul Gortmaker
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map them onto including export.h -- or if the file isn't even using those, then just delete the include. Fix up any implicit include dependencies that were being masked by module.h along the way. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-01-03fs: move code out of buffer.cAl Viro
Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export kill_bdev as well, so brd doesn't have to open code it. Reduce buffer_head.h requirement accordingly. Removed a rather large comment from invalidate_bdev, as it looked a bit obsolete to bother moving. The small comment replacing it says enough. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-06Merge branch 'writeback-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux * 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Add a 'reason' to wb_writeback_work writeback: send work item to queue_io, move_expired_inodes writeback: trace event balance_dirty_pages writeback: trace event bdi_dirty_ratelimit writeback: fix ppc compile warnings on do_div(long long, unsigned long) writeback: per-bdi background threshold writeback: dirty position control - bdi reserve area writeback: control dirty pause time writeback: limit max dirty pause time writeback: IO-less balance_dirty_pages() writeback: per task dirty rate limit writeback: stabilize bdi->dirty_ratelimit writeback: dirty rate control writeback: add bg_threshold parameter to __bdi_update_bandwidth() writeback: dirty position control writeback: account per-bdi accumulated dirtied pages
2011-10-31fs/buffer.c: add device information for error output in __find_get_block_slow()Tao Ma
On the ext4 mailing list[1], we got some report about errors in __find_get_block_slow(), but the information is very limited. If the device information is given, we can know the name of the sick volume. Futhermore, we can get the corresponding status of that block(group, inode block etc) by analyzing the disk layout. [1] http://marc.info/?l=linux-ext4&m=131379831421147&w=2 Signed-off-by: Tao Ma <boyu.mt@taobao.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31writeback: Add a 'reason' to wb_writeback_workCurt Wohlgemuth
This creates a new 'reason' field in a wb_writeback_work structure, which unambiguously identifies who initiates writeback activity. A 'wb_reason' enumeration has been added to writeback.h, to enumerate the possible reasons. The 'writeback_work_class' and tracepoint event class and 'writeback_queue_io' tracepoints are updated to include the symbolic 'reason' in all trace events. And the 'writeback_inodes_sbXXX' family of routines has had a wb_stats parameter added to them, so callers can specify why writeback is being started. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>