summaryrefslogtreecommitdiffstats
path: root/fs/ext4/super.c
AgeCommit message (Collapse)Author
2007-02-12[PATCH] Mark struct super_operations constJosef 'Jeff' Sipek
This patch is inspired by Arjan's "Patch series to mark struct file_operations and struct inode_operations const". Compile tested with gcc & sparse. Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] fix umask when noACL kernel meets extN tuned for ACLsHugh Dickins
Fix insecure default behaviour reported by Tigran Aivazian: if an ext2 or ext3 or ext4 filesystem is tuned to mount with "acl", but mounted by a kernel built without ACL support, then umask was ignored when creating inodes - though root or user has umask 022, touch creates files as 0666, and mkdir creates directories as 0777. This appears to have worked right until 2.6.11, when a fix to the default mode on symlinks (always 0777) assumed VFS applies umask: which it does, unless the mount is marked for ACLs; but ext[234] set MS_POSIXACL in s_flags according to s_mount_opt set according to def_mount_opts. We could revert to the 2.6.10 ext[234]_init_acl (adding an S_ISLNK test); but other filesystems only set MS_POSIXACL when ACLs are configured. We could fix this at another level; but it seems most robust to avoid setting the s_mount_opt flag in the first place (at the expense of more ifdefs). Likewise don't set the XATTR_USER flag when built without XATTR support. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: <linux-ext4@vger.kernel.org> Cc: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] ext4: refuse ro to rw remount of fs with orphan inodesEric Sandeen
In the rare case where we have skipped orphan inode processing due to a readonly block device, and the block device subsequently changes back to read-write, disallow a remount,rw transition of the filesystem when we have an unprocessed orphan inodes as this would corrupt the list. Ideally we should process the orphan inode list during the remount, but that's trickier, and this plugs the hole for now. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-07[PATCH] ext3/4: don't do orphan processing on readonly devicesEric Sandeen
If you do something like: # touch foo # tail -f foo & # rm foo # <take snapshot> # <mount snapshot> you'll panic, because ext3/4 tries to do orphan list processing on the readonly snapshot device, and: kernel: journal commit I/O error kernel: Assertion failure in journal_flush_Rsmp_e2f189ce() at journal.c:1356: "!journal->j_checkpoint_transactions" kernel: Kernel panic: Fatal exception for a truly readonly underlying device, it's reasonable and necessary to just skip orphan list processing. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] ext4: fsid for statvfsPekka Enberg
Update ext4_statfs to return an FSID that is a 64 bit XOR of the 128 bit filesystem UUID as suggested by Andreas Dilger. See the following Bugzilla entry for details: http://bugzilla.kernel.org/show_bug.cgi?id=136 Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Stephen Tweedie <sct@redhat.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove SLAB_NOFSChristoph Lameter
SLAB_NOFS is an alias of GFP_NOFS. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4 whitespace cleanupsAndrew Morton
Someone's tab key is emitting spaces. Attempt to repair some of the damage. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: errors behaviour fixDmitry Mishin
Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT4_ERRORS_CONTINUE should be taken from the superblock as default value for error behaviour. Signed-off-by: Dmitry Mishin <dim@openvz.org> Acked-by: Vasily Averin <vvs@sw.ru> Acked-by: Kirill Korotaev <dev@openvz.org> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: rename logic_sb_blockAndrew Morton
I assume this means "logical sb block". So call it that. I still don't understand the name though. A block is a block. What's different about this one? Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4 64 bit divide fixAndrew Morton
With CONFIG_LBD=n, sector_div() expands to a plain old divide. But ext4 is _not_ passing in a sector_t as the first argument, so... fs/built-in.o: In function `ext4_get_group_no_and_offset': fs/ext4/balloc.c:39: undefined reference to `__umoddi3' fs/ext4/balloc.c:41: undefined reference to `__udivdi3' fs/built-in.o: In function `find_group_orlov': fs/ext4/ialloc.c:278: undefined reference to `__udivdi3' fs/built-in.o: In function `ext4_fill_super': fs/ext4/super.c:1488: undefined reference to `__udivdi3' fs/ext4/super.c:1488: undefined reference to `__umoddi3' fs/ext4/super.c:1594: undefined reference to `__udivdi3' fs/ext4/super.c:1601: undefined reference to `__umoddi3' Fix that up by calling do_div() directly. Also cast the arg to u64. do_div() is only defined on u64, and ext4_fsblk_t is supposed to be opaque. Note especially the changes to find_group_orlov(). It was attempting to do do_div(int, unsigned long long); which is royally screwed up. Switched it to plain old divide. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: move block number hi bitsAlexandre Ratchov
move '_hi' bits of block numbers in the larger part of the block group descriptor structure Signed-off-by: Alexandre Ratchov <alexandre.ratchov@bull.net> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: allow larger descriptor sizeAlexandre Ratchov
make block group descriptor larger. Signed-off-by: Alexandre Ratchov <alexandre.ratchov@bull.net> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: blk_type from sector_t to unsigned long longMingming Cao
Change ext4 in-kernel block type (ext4_fsblk_t) from sector_t to unsigned long long. Remove ext4 block type string micro E3FSBLK, replaced with "%llu" [akpm@osdl.org: build fix] Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: 64bit metadataLaurent Vivier
In-kernel super block changes to support >32 bit free blocks numbers. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Alexandre Ratchov <alexandre.ratchov@bull.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: switch fsblk to sector_tMingming Cao
Redefine ext3 in-kernel filesystem block type (ext3_fsblk_t) from unsigned long to sector_t, to allow kernel to handle >32 bit ext3 blocks. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext3: add extent map supportAlex Tomas
On disk extents format: /* * this is extent on-disk structure * it's used at the bottom of the tree */ struct ext3_extent { __le32 ee_block; /* first logical block extent covers */ __le16 ee_len; /* number of blocks covered by extent */ __le16 ee_start_hi; /* high 16 bits of physical block */ __le32 ee_start; /* low 32 bigs of physical block */ }; Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] jbd2: enable building of jbd2 and have ext4 use it rather than jbdMingming Cao
Reworked from a patch by Mingming Cao and Randy Dunlap Signed-off-By: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: rename ext4 symbols to avoid duplication of ext3 symbolsMingming Cao
Mingming Cao originally did this work, and Shaggy reproduced it using some scripts from her. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] ext4: initial copy of files from ext3Dave Kleikamp
Start of the ext4 patch series. See Documentation/filesystems/ext4.txt for details. This is a simple copy of the files in fs/ext3 to fs/ext4 and /usr/incude/linux/ext3* to /usr/include/ex4* Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>