| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
|
|
Require filesystems be aware of .d_revalidate being called in rcu-walk
mode (nd->flags & LOOKUP_RCU). For now do a simple push down, returning
-ECHILD from all implementations.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
|
|
Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.
Patched with:
git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
|
|
Make sure we check the truncate constraints early on in ->setattr by adding
those checks to inode_change_ok. Also clean up and document inode_change_ok
to make this obvious.
As a fallout we don't have to call inode_newsize_ok from simple_setsize and
simplify it down to a truncate_setsize which doesn't return an error. This
simplifies a lot of setattr implementations and means we use truncate_setsize
almost everywhere. Get rid of fat_setsize now that it's trivial and mark
ext2_setsize static to make the calling convention obvious.
Keep the inode_newsize_ok in vmtruncate for now as all callers need an
audit for its removal anyway.
Note: setattr code in ecryptfs doesn't call inode_change_ok at all and
needs a deeper audit, but that is left for later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Make sure we call inode_change_ok before doing any changes in ->setattr,
and make sure to call it even if our fs wants to ignore normal UNIX
permissions, but use the ATTR_FORCE to skip those.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Currently MAY_ACCESS means that filesystems must check the permissions
right then and not rely on cached results or the results of future
operations on the object. This can be because of a call to sys_access() or
because of a call to chdir() which needs to check search without relying on
any future operations inside that dir. I plan to use MAY_ACCESS for other
purposes in the security system, so I split the MAY_ACCESS and the
MAY_CHDIR cases.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The comment in fuse_open about O_DIRECT:
"VFS checks this, but only _after_ ->open()"
also holds for fuse_create, however, the same kind of check was missing there.
As an impact of this bug, open(newfile, O_RDWR|O_CREAT|O_DIRECT) fails, but a
stub newfile will remain if the fuse server handled the implied FUSE_CREATE
request appropriately.
Other impact: in the above situation ima_file_free() will complain to open/free
imbalance if CONFIG_IMA is set.
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Harshavardhana <harsha@gluster.com>
Cc: stable@kernel.org
|
|
Invalidate the target's attributes, which may have changed (such as
nlink, change time) so that they are refreshed on the next getattr().
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Update some fs code to make use of new helper functions introduced
in the previous patch. Should be no significant change in behaviour
(except CIFS now calls send_sig under i_lock, via inode_newsize_ok).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: linux-nfs@vger.kernel.org
Cc: Trond.Myklebust@netapp.com
Cc: linux-cifs-client@lists.samba.org
Cc: sfrench@samba.org
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add notification messages that allow the filesystem to invalidate VFS
caches.
Two notifications are added:
1) inode invalidation
- invalidate cached attributes
- invalidate a range of pages in the page cache (this is optional)
2) dentry invalidation
- try to invalidate a subtree in the dentry cache
Care must be taken while accessing the 'struct super_block' for the
mount, as it can go away while an invalidation is in progress. To
prevent this, introduce a rw-semaphore, that is taken for read during
the invalidation and taken for write in the ->kill_sb callback.
Cc: Csaba Henk <csaba@gluster.com>
Cc: Anand Avati <avati@zresearch.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
This patch lets filesystems handle masking the file mode on creation.
This is needed if filesystem is using ACLs.
- The CREATE, MKDIR and MKNOD requests are extended with a "umask"
parameter.
- A new FUSE_DONT_MASK flag is added to the INIT request/reply. With
this the filesystem may request that the create mode is not masked.
CC: Jean-Pierre André <jean-pierre.andre@wanadoo.fr>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Make fuse_sync_release() a generic helper function that doesn't need a
struct inode pointer. This makes it suitable for use by CUSE.
Change return value of fuse_release_common() from int to void.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Create a helper for sending an OPEN request that doesn't need a struct
inode pointer.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Move setting ff->fh, ff->nodeid and file->private_data outside
fuse_finish_open(). Add ->open_flags member to struct fuse_file.
This simplifies the argument passing to fuse_finish_open() and
fuse_release_fill(), and paves the way for creating an open helper
that doesn't need an inode pointer.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Use ff->fc and ff->nodeid instead of passing down the inode.
This prepares this function for use by CUSE, where the inode is not
owned by a fuse filesystem.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Allow the kernel read and write on "direct_io" files. This is
necessary for nfs export and execute support.
The implementation is simple: if an access from the kernel is
detected, don't perform get_user_pages(), just use the kernel address
provided by the requester to copy from/to the userspace filesystem.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: clean up annotations of fc->lock
fuse: fix sparse warning in ioctl
fuse: update interface version
fuse: add fuse_conn->release()
fuse: separate out fuse_conn_init() from new_conn()
fuse: add fuse_ prefix to several functions
fuse: implement poll support
fuse: implement unsolicited notification
fuse: add file kernel handle
fuse: implement ioctl support
fuse: don't let fuse_req->end() put the base reference
fuse: move FUSE_MINOR to miscdevice.h
fuse: style fixes
|
|
Add fuse_ prefix to request_send*() and get_root_inode() as some of
those functions will be exported for CUSE. With or without CUSE
export, having the function names scoped is a good idea for
debuggability.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
The file handle, fuse_file->fh, is opaque value supplied by userland
FUSE server and uniqueness is not guaranteed. Add file kernel handle,
fuse_file->kh, which is allocated by the kernel on file allocation and
guaranteed to be unique.
This will be used by poll to match notification to the respective file
but can be used for other purposes where unique file handle is
necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Fix coding style errors reported by checkpatch and others. Uptdate
copyright date to 2008.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Use RCU to access another task's creds and to release a task's own creds.
This means that it will be possible for the credentials of a task to be
replaced without another task (a) requiring a full lock to read them, and (b)
seeing deallocated memory.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.
Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.
With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
* MAY_CHDIR is redundant - it's an equivalent of MAY_ACCESS
* MAY_ACCESS on fuse should affect only the last step of pathname resolution
* fchdir() and chroot() should pass MAY_ACCESS, for the same reason why
chdir() needs that.
* now that we pass MAY_ACCESS explicitly in all cases, LOOKUP_ACCESS can be
removed; it has no business being in nameidata.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* kill nameidata * argument; map the 3 bits in ->flags anybody cares
about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
MAY_... found in mask.
The obvious next target in that direction is permission(9)
folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add a new helper function which sends a LOOKUP request with the supplied
name. This will be used by the next patch to send special LOOKUP requests
with "." and ".." as the name.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Implement export_operations, to allow fuse filesystems to be exported to
NFS. This feature has been in the out-of-tree fuse module, and is widely
used and tested.
It has not been originally merged into mainline, because doing the NFS
export in userspace was thought to be a cleaner and more efficient way of
doing it, than through the kernel.
While that is true, it would also have involved a lot of duplicated effort
at reimplementing NFS exporting (all the different versions of the
protocol). This effort was unfortunately not undertaken by anyone, so we
are left with doing it the easy but less efficient way.
If this feature goes in, the out-of-tree fuse module can go away,
which would have several advantages:
- not having to maintain two versions
- less confusion for users
- no bugs due to kernel API changes
Comment from hch:
- Use the same fh_type values as XFS, since we use the same fh encoding.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use d_splice_alias() instead of d_add() in fuse lookup code, to allow NFS
exporting.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the READ request returned a short count, then either
- cached size is incorrect
- filesystem is buggy, as short reads are only allowed on EOF
So assume that the size is wrong and refresh it, so that cached read() doesn't
zero fill the missing chunk.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Quoting Linus (3 years ago, FUSE inclusion discussions):
"User-space filesystems are hard to get right. I'd claim that they
are almost impossible, unless you limit them somehow (shared
writable mappings are the nastiest part - if you don't have those,
you can reasonably limit your problems by limiting the number of
dirty pages you accept through normal "write()" calls)."
Instead of attempting the impossible, I've just waited for the dirty page
accounting infrastructure to materialize (thanks to Peter Zijlstra and
others). This nicely solved the biggest problem: limiting the number of pages
used for write caching.
Some small details remained, however, which this largish patch attempts to
address. It provides a page writeback implementation for fuse, which is
completely safe against VM related deadlocks. Performance may not be very
good for certain usage patterns, but generally it should be acceptable.
It has been tested extensively with fsx-linux and bash-shared-mapping.
Fuse page writeback design
--------------------------
fuse_writepage() allocates a new temporary page with GFP_NOFS|__GFP_HIGHMEM.
It copies the contents of the original page, and queues a WRITE request to the
userspace filesystem using this temp page.
The writeback is finished instantly from the MM's point of view: the page is
removed from the radix trees, and the PageDirty and PageWriteback flags are
cleared.
For the duration of the actual write, the NR_WRITEBACK_TEMP counter is
incremented. The per-bdi writeback count is not decremented until the actual
write completes.
On dirtying the page, fuse waits for a previous write to finish before
proceeding. This makes sure, there can only be one temporary page used at a
time for one cached page.
This approach is wasteful in both memory and CPU bandwidth, so why is this
complication needed?
The basic problem is that there can be no guarantee about the time in which
the userspace filesystem will complete a write. It may be buggy or even
malicious, and fail to complete WRITE requests. We don't want unrelated parts
of the system to grind to a halt in such cases.
Also a filesystem may need additional resources (particularly memory) to
complete a WRITE request. There's a great danger of a deadlock if that
allocation may wait for the writepage to finish.
Currently there are several cases where the kernel can block on page
writeback:
- allocation order is larger than PAGE_ALLOC_COSTLY_ORDER
- page migration
- throttle_vm_writeout (through NR_WRITEBACK)
- sync(2)
Of course in some cases (fsync, msync) we explicitly want to allow blocking.
So for these cases new code has to be added to fuse, since the VM is not
tracking writeback pages for us any more.
As an extra safetly measure, the maximum dirty ratio allocated to a single
fuse filesystem is set to 1% by default. This way one (or several) buggy or
malicious fuse filesystems cannot slow down the rest of the system by hogging
dirty memory.
With appropriate privileges, this limit can be raised through
'/sys/class/bdi/<bdi>/max_ratio'.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I added a nasty local variable shadowing bug to fuse in 2.6.24, with the
result, that the 'default_permissions' mount option is basically ignored.
How did this happen?
- old err declaration in inner scope
- new err getting declared in outer scope
- 'return err' from inner scope getting removed
- old declaration not being noticed
-Wshadow would have saved us, but it doesn't seem practical for
the kernel :(
More testing would have also saved us :((
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert instances of ERR_PTR(PTR_ERR(p)) to ERR_CAST(p) using:
perl -spi -e 's/ERR_PTR[(]PTR_ERR[(](.*)[)][)]/ERR_CAST(\1)/' `grep -rl 'ERR_PTR[(]*PTR_ERR' fs crypto net security`
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Invalidate attributes on create, since st_ctime is updated. Reported by
Szabolcs Szakacsits.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Invalidate attributes on rename, since some filesystems may update
st_ctime. Reported by Szabolcs Szakacsits
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some open flags (O_APPEND, O_DIRECT) can be changed with fcntl(F_SETFL, ...)
after open, but fuse currently only sends the flags to userspace in open.
To make it possible to correcly handle changing flags, send the
current value to userspace in each read and write.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Extract repeated code into helper function, as suggested by Akpm.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently reading a fuse file will stop at cached i_size and return
EOF, even though the file might have grown since the attributes were
last updated.
So detect if trying to read past EOF, and refresh the attributes
before continuing with the read.
Thanks to mpb for the report.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are cases when the filesystem will be passed the buffer from a single
read or write call, namely:
1) in 'direct-io' mode (not O_DIRECT), read/write requests don't go
through the page cache, but go directly to the userspace fs
2) currently buffered writes are done with single page requests, but
if Nick's ->perform_write() patch goes it, it will be possible to
do larger write requests. But only if the original write() was
also bigger than a page.
In these cases the filesystem might want to give a hint to the app
about the optimal I/O size.
Allow the userspace filesystem to supply a blksize value to be returned by
stat() and friends. If the field is zero, it defaults to the old
PAGE_CACHE_SIZE value.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For mandatory locking the userspace filesystem needs to know the lock
ownership for read, write and truncate operations.
This patch adds the necessary fields to the protocol.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch allows fuse filesystems to implement open(..., O_TRUNC) as a single
request, instead of separate truncate and open requests.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add two new flags for setattr: FATTR_ATIME_NOW and FATTR_MTIME_NOW. These
mean, that atime or mtime should be changed to the current time.
Also it is now possible to update atime or mtime individually, not just
together.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clean up supplying open file to the setattr operation. In addition to being a
cleanup it prepares for the changes in the way the open file is passed to the
setattr method.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add necessary protocol changes for supplying a file handle with the getattr
operation. Step the API version to 7.9.
This patch doesn't actually supply the file handle, because that needs some
kind of VFS support, which we haven't yet been able to agree upon.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Getattr and lookup operations can be running in parallel to attribute changing
operations, such as write and setattr.
This means, that if for example getattr was slower than a write, the cached
size attribute could be set to a stale value.
To prevent this race, introduce a per-filesystem attribute version counter.
This counter is incremented whenever cached attributes are modified, and the
incremented value stored in the inode.
Before storing new attributes in the cache, getattr and lookup check, using
the version number, whether the attributes have been modified during the
request's lifetime. If so, the returned attributes are not cached, because
they might be stale.
Thanks to Jakub Bogusz for the bug report and test program.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Jakub Bogusz <jakub.bogusz@gemius.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following operation didn't check if sending the request was allowed:
setattr
listxattr
statfs
Some other operations don't explicitly do the check, but VFS calls
->permission() which checks this.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Define a new function fuse_refresh_attributes() that conditionally refreshes
the attributes based on the validity timeout.
In fuse_permission() only refresh the attributes for checking the execute bits
if necessary.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The VFS checks sticky bits on the parent directory even if the filesystem
defines it's own ->permission(). In some situations (sshfs, mountlo, etc) the
user does have permission to delete a file even if the attribute based
checking would not allow it.
So work around this by storing the permission bits separately and returning
them in stat(), but cutting the permission bits off from inode->i_mode.
This is slightly hackish, but it's probably not worth it to add new
infrastructure in VFS and a slight performance penalty for all filesystems,
just for the sake of fuse.
[Jan Engelhardt] cosmetic fixes
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
fuse_permission() didn't refresh inode attributes before using them, even if
the validity has already expired.
Thanks to Junjiro Okajima for spotting this.
Also remove some old code to unconditionally refresh the attributes on the
root inode.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
