summaryrefslogtreecommitdiffstats
path: root/fs/gfs2
AgeCommit message (Collapse)Author
2012-11-07GFS2: Test bufdata with buffer locked and gfs2_log_lock heldBenjamin Marzinski
In gfs2_trans_add_bh(), gfs2 was testing if a there was a bd attached to the buffer without having the gfs2_log_lock held. It was then assuming it would stay attached for the rest of the function. However, without either the log lock being held of the buffer locked, __gfs2_ail_flush() could detach bd at any time. This patch moves the locking before the test. If there isn't a bd already attached, gfs2 can safely allocate one and attach it before locking. There is no way that the newly allocated bd could be on the ail list, and thus no way for __gfs2_ail_flush() to detach it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07GFS2: Don't call file_accessed() with a shared glockBenjamin Marzinski
file_accessed() was being called by gfs2_mmap() with a shared glock. If it needed to update the atime, it was crashing because it dirtied the inode in gfs2_dirty_inode() without holding an exclusive lock. gfs2_dirty_inode() checked if the caller was already holding a glock, but it didn't make sure that the glock was in the exclusive state. Now, instead of calling file_accessed() while holding the shared lock in gfs2_mmap(), file_accessed() is called after grabbing and releasing the glock to update the inode. If file_accessed() needs to update the atime, it will grab an exclusive lock in gfs2_dirty_inode(). gfs2_dirty_inode() now also checks to make sure that if the calling process has already locked the glock, it has an exclusive lock. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07GFS2: Fix FITRIM argument handlingLukas Czerner
Currently implementation in gfs2 uses FITRIM arguments as it were in file system blocks units which is wrong. The FITRIM arguments (fstrim_range.start, fstrim_range.len and fstrim_range.minlen) are actually in bytes. Moreover, check for start argument beyond the end of file system, len argument being smaller than file system block and minlen argument being bigger than biggest resource group were missing. This commit converts the code to convert FITRIM argument to file system blocks and also adds appropriate checks mentioned above. All the problems were recognised by xfstests 251 and 260. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07GFS2: Require user to provide argument for FITRIMLukas Czerner
When the fstrim_range argument is not provided by user in FITRIM ioctl we should just return EFAULT and not promoting bad behaviour by filling the structure in kernel. Let the user deal with it. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07GFS2: Clean up some unused assignmentsAndrew Price
Cleans up two cases where variables were assigned values but then never used again. Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07GFS2: Fix possible null pointer deref in gfs2_rs_allocAndrew Price
Despite the return value from kmem_cache_zalloc() being checked, the error wasn't being returned until after a possible null pointer dereference. This patch returns the error immediately, allowing the removal of the error variable. Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07GFS2: Fix an unchecked error from gfs2_rs_allocAndrew Price
Check the return value of gfs2_rs_alloc(ip) and avoid a possible null pointer dereference. Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-10-09tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checkingHugh Dickins
Fuzzing with trinity oopsed on the 1st instruction of shmem_fh_to_dentry(), u64 inum = fid->raw[2]; which is unhelpfully reported as at the end of shmem_alloc_inode(): BUG: unable to handle kernel paging request at ffff880061cd3000 IP: [<ffffffff812190d0>] shmem_alloc_inode+0x40/0x40 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Call Trace: [<ffffffff81488649>] ? exportfs_decode_fh+0x79/0x2d0 [<ffffffff812d77c3>] do_handle_open+0x163/0x2c0 [<ffffffff812d792c>] sys_open_by_handle_at+0xc/0x10 [<ffffffff83a5f3f8>] tracesys+0xe1/0xe6 Right, tmpfs is being stupid to access fid->raw[2] before validating that fh_len includes it: the buffer kmalloc'ed by do_sys_name_to_handle() may fall at the end of a page, and the next page not be present. But some other filesystems (ceph, gfs2, isofs, reiserfs, xfs) are being careless about fh_len too, in fh_to_dentry() and/or fh_to_parent(), and could oops in the same way: add the missing fh_len checks to those. Reported-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Sage Weil <sage@inktank.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-09mm: kill vma flag VM_CAN_NONLINEARKonstantin Khlebnikov
Move actual pte filling for non-linear file mappings into the new special vma operation: ->remap_pages(). Filesystems must implement this method to get non-linear mapping support, if it uses filemap_fault() then generic_file_remap_pages() can be used. Now device drivers can implement this method and obtain nonlinear vma support. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> #arch/tile Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace changes from Eric Biederman: "This is a mostly modest set of changes to enable basic user namespace support. This allows the code to code to compile with user namespaces enabled and removes the assumption there is only the initial user namespace. Everything is converted except for the most complex of the filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs, nfs, ocfs2 and xfs as those patches need a bit more review. The strategy is to push kuid_t and kgid_t values are far down into subsystems and filesystems as reasonable. Leaving the make_kuid and from_kuid operations to happen at the edge of userspace, as the values come off the disk, and as the values come in from the network. Letting compile type incompatible compile errors (present when user namespaces are enabled) guide me to find the issues. The most tricky areas have been the places where we had an implicit union of uid and gid values and were storing them in an unsigned int. Those places were converted into explicit unions. I made certain to handle those places with simple trivial patches. Out of that work I discovered we have generic interfaces for storing quota by projid. I had never heard of the project identifiers before. Adding full user namespace support for project identifiers accounts for most of the code size growth in my git tree. Ultimately there will be work to relax privlige checks from "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing root in a user names to do those things that today we only forbid to non-root users because it will confuse suid root applications. While I was pushing kuid_t and kgid_t changes deep into the audit code I made a few other cleanups. I capitalized on the fact we process netlink messages in the context of the message sender. I removed usage of NETLINK_CRED, and started directly using current->tty. Some of these patches have also made it into maintainer trees, with no problems from identical code from different trees showing up in linux-next. After reading through all of this code I feel like I might be able to win a game of kernel trivial pursuit." Fix up some fairly trivial conflicts in netfilter uid/git logging code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits) userns: Convert the ufs filesystem to use kuid/kgid where appropriate userns: Convert the udf filesystem to use kuid/kgid where appropriate userns: Convert ubifs to use kuid/kgid userns: Convert squashfs to use kuid/kgid where appropriate userns: Convert reiserfs to use kuid and kgid where appropriate userns: Convert jfs to use kuid/kgid where appropriate userns: Convert jffs2 to use kuid and kgid where appropriate userns: Convert hpfs to use kuid and kgid where appropriate userns: Convert btrfs to use kuid/kgid where appropriate userns: Convert bfs to use kuid/kgid where appropriate userns: Convert affs to use kuid/kgid wherwe appropriate userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids userns: On ia64 deal with current_uid and current_gid being kuid and kgid userns: On ppc convert current_uid from a kuid before printing. userns: Convert s390 getting uid and gid system calls to use kuid and kgid userns: Convert s390 hypfs to use kuid and kgid where appropriate userns: Convert binder ipc to use kuids userns: Teach security_path_chown to take kuids and kgids userns: Add user namespace support to IMA userns: Convert EVM to deal with kuids and kgids in it's hmac computation ...
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-09-24GFS2: Write out dirty inode metadata in delayed deletesBenjamin Marzinski
If a dirty GFS2 inode was being deleted but was in use by another node, its metadata was not getting written out before GFS2 checked for dirty buffers in gfs2_ail_flush(). GFS2 was relying on inode_go_sync() to write out the metadata when the other node tried to free the file, but it failed the error check before it got that far. This patch writes out the metadata before calling gfs2_ail_flush() Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: fix s_writers.counter imbalance in gfs2_ail_empty_glEric Sandeen
gfs2_ail_empty_gl() contains an "inline version" of gfs2_trans_begin(), so it needs an explicit sb_start_intwrite() as well, to balance the sb_end_intwrite() which will be called by gfs2_trans_end(). With this, xfstest 068 passes on lock_nolock local gfs2. Without it, we reach a writer count of -1 and get stuck. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Fix infinite loop in rbm_findBob Peterson
This patch fixes an infinite loop in gfs2_rbm_find that was introduced by the previous patch. The problem occurred when the length was less than 3 but the rbm block was byte-aligned, causing it to improperly return a extent length of zero, which caused it to spin. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Tested-by: Bob Peterson <rpeterso@redhat.com> Tested-by: Barry Marson <bmarson@redhat.com>
2012-09-24GFS2: Consolidate free block searching functionsSteven Whitehouse
With the recently added block reservation code, an additional function was added to search for free blocks. This had a restriction of only being able to search for aligned extents of free blocks. As a result the allocation patterns when reserving blocks were suboptimal when the existing allocation of blocks for an inode was not aligned to the same boundary. This patch resolves that problem by adding the ability for gfs2_rbm_find to search for extents of a particular minimum size. We can then use gfs2_rbm_find for both looking for reservations, and also looking for free blocks on an individual basis when we actually come to do the allocation later on. As a result we only need a single set of code to deal with both situations. The function gfs2_rbm_from_block() is moved up rgrp.c so that it occurs before all of its callers. Many thanks are due to Bob for helping track down the final issue in this patch. That fix to the rb_tree traversal and to not share block reservations from a dirctory to its children is included here. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2012-09-24GFS2: Get rid of I_MUTEX_QUOTA usageJan Kara
GFS2 uses i_mutex on its system quota inode to synchronize writes to quota file. Since this is an internal inode to GFS2 (not part of directory hiearchy or visible by user) we are safe to define locking rules for it. So let's just get it its own locking class to make it clear. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Stop block extents at the end of bitmapsBob Peterson
This patch stops multiple block allocations if a nonzero return code is received from gfs2_rbm_from_block. Without this patch, if enough pressure is put on the file system, you get a kernel warning quickly followed by: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa04f47e8>] gfs2_alloc_blocks+0x2c8/0x880 [gfs2] With this patch, things run normally. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Fix unclaimed_blocks() wrapping bug and clean upSteven Whitehouse
When rgd->rd_free_clone is less than rgd->rd_reserved, the unclaimed_blocks() calculation would wrap and produce incorrect results. This patch checks for this condition when this function is called from gfs2_mblk_search() In addition, the use of this particular function in other places in the code has been dropped by means of a general clean up of gfs2_inplace_reserve(). This function is now much easier to follow. Also the setting of the rgd->rd_last_alloc field is corrected. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Improve block reservation tracingSteven Whitehouse
This patch improves the tracing of block reservations by removing some corner cases and also providing more useful detail in the traces. A new field is added to the reservation structure to contain the inode number. This is used since in certain contexts it is not possible to access the inode itself to obtain this information. As a result we can then display the inode number for all tracepoints and also in case we dump the resource group. The "del" tracepoint operation has been removed. This could be called with the reservation rgrp set to NULL. That resulted in not printing the device number, and thus making the information largely useless anyway. Also, the conditional on the rgrp being NULL can then be removed from the tracepoint. After this change, all the block reservation tracepoint calls will be called with the rgrp information. The existing ins,clm and tdel calls to the block reservation tracepoint are sufficient to track the entire life of the block reservation. In gfs2_block_alloc() the error detection is updated to print out the inode number of the problematic inode. This can then be compared against the information in the glock dump,tracepoints, etc. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Fall back to ignoring reservations, if there are no other blocks leftSteven Whitehouse
When we get to the stage of allocating blocks, we know that the resource group in question must contain enough free blocks, otherwise gfs2_inplace_reserve() would have failed. So if we are left with only free blocks which are reserved, then we must use those. This can happen if another node has sneeked in and use some blocks reserved on this node, for example. Generally this will happen very rarely and only when the resouce group is nearly full. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Fix ->show_options() for statfs slowSteven Whitehouse
The ->show_options() function for GFS2 was not correctly displaying the value when statfs slow in in use. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: Milos Jakubicek <xjakub@fi.muni.cz>
2012-09-24GFS2: Use rbm for gfs2_setbit()Steven Whitehouse
Use the rbm structure for gfs2_setbit() in order to simplify the arguments to the function. We have to add a bool to control whether the clone bitmap should be updated (if it exists) but otherwise it is a more or less direct substitution. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Use rbm for gfs2_testbit()Steven Whitehouse
Change the arguments to gfs2_testbit() so that it now just takes an rbm specifying the position of the two bit entry to return. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Eliminate unnecessary check for state > 3 in bitfitBob Peterson
Function gfs2_bitfit was checking for state > 3, but that's impossible since it is only called from rgblk_search, which receives only GFS2_BLKST_ constants. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Eliminate redundant calls to may_grantBob Peterson
Function add_to_queue was checking may_grant for the passed-in holder for every iteration of its gh2 loop. Now it only checks it once at the beginning to see if a try lock is futile. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Combine functions gfs2_glock_dq_wait and wait_on_demoteBob Peterson
Function gfs2_glock_dq_wait called two-line function wait_on_demote, so they were combined. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Combine functions gfs2_glock_wait and wait_on_holderBob Peterson
Function gfs2_glock_wait only called function wait_on_holder and returned its return code, so they were combined for readability. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: inline __gfs2_glock_schedule_for_reclaimBob Peterson
Since function gfs2_glock_schedule_for_reclaim is only two significant lines, we can eliminate it, simplifying the code and making it more readable. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: change function gfs2_direct_IO to use a normal gfs2_glock_dqBob Peterson
This patch changes function gfs2_direct_IO so that it uses a normal call to gfs2_glock_dq rather than a call to a multiple-dq of one item. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: rbm code cleanupBob Peterson
This patch fixes a few small rbm related things. First, it fixes a corner case where the rbm needs to switch bitmaps and wasn't adjusting its buffer pointer. Second, there's a white space issue fixed. Third, the logic in function gfs2_rbm_from_block was optimized a bit. Lastly, a check for goal block overflows was added to function gfs2_alloc_blocks. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Fix case where reservation finished at end of rgrpSteven Whitehouse
One corner case which the original patch failed to take into account was when there is a reservation which ended such that the following block was one beyond the end of the rgrp in question. This extra test fixes that case. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: Bob Peterson <rpeterso@redhat.com> Tested-by: Bob Peterson <rpeterso@redhat.com>
2012-09-24GFS2: Use RB_CLEAR_NODE() rather than rb_init_node()Michel Lespinasse
gfs2 calls RB_EMPTY_NODE() to check if nodes are not on an rbtree. The corresponding initialization function is RB_CLEAR_NODE(). rb_init_node() was never clearly defined and is going away. Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Update rgblk_free() to use rbmSteven Whitehouse
Replace open coded version with a call to gfs2_rbm_from_block() Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Update gfs2_get_block_type() to use rbmSteven Whitehouse
Use the new gfs2_rbm_from_block() function to replace an open coded version of the same code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Replace rgblk_search with gfs2_rbm_findSteven Whitehouse
This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Add structure to contain rgrp, bitmap, offset tupleSteven Whitehouse
This patch introduces a new structure, gfs2_rbm, which is a tuple of a resource group, a bitmap within the resource group and an offset within that bitmap. This is designed to make manipulating these sets of variables easier. There is also a new helper function which converts this representation back to a disk block address. In addition, the rbtree nodes which are used for the reservations were not being correctly initialised, which is now fixed. Also, the tracing was not passing through the inode where it should have been. That is mostly fixed aside from one corner case. This needs to be revisited since there can also be a NULL rgrp in some cases which results in the device being incorrect in the trace. This is intended to be the first step towards cleaning up some of the allocation code, and some further bug fixes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Remove rs_requested field from reservationsSteven Whitehouse
The rs_requested field is left over from the original allocation code, however this should have been a parameter passed to the various functions from gfs2_inplace_reserve() and not a member of the reservation structure as the value is not required after the initial allocation. This also helps simplify the code since we no longer need to set the rs_requested to zero. Also the gfs2_inplace_release() function can also be simplified since the reservation structure will always be defined when it is called, and the only remaining task is to unlock the rgrp if required. It can also now be called unconditionally too, resulting in a further simplification. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Merge two nearly identical xattr functionsSteven Whitehouse
There were two functions in the xattr code which were nearly identical, the only difference being that one was copy data into the unstuffed xattrs and the other was copying data out from it. This patch merges the two functions such that the code which deal with iteration over the unstuffed xattrs is no longer duplicated. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-18userns: Convert quota netlink aka quota_send_warningEric W. Biederman
Modify quota_send_warning to take struct kqid instead a type and identifier pair. When sending netlink broadcasts always convert uids and quota identifiers into the intial user namespace. There is as yet no way to send a netlink broadcast message with different contents to receivers in different namespaces, so for the time being just map all of the identifiers into the initial user namespace which preserves the current behavior. Change the callers of quota_send_warning in gfs2, xfs and dquot to generate a struct kqid to pass to quota send warning. When all of the user namespaces convesions are complete a struct kqid values will be availbe without need for conversion, but a conversion is needed now to avoid needing to convert everything at once. Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18userns: Convert qutoactlEric W. Biederman
Update the quotactl user space interface to successfull compile with user namespaces support enabled and to hand off quota identifiers to lower layers of the kernel in struct kqid instead of type and qid pairs. The quota on function is not converted because while it takes a quota type and an id. The id is the on disk quota format to use, which is something completely different. The signature of two struct quotactl_ops methods were changed to take struct kqid argumetns get_dqblk and set_dqblk. The dquot, xfs, and ocfs2 implementations of get_dqblk and set_dqblk are minimally changed so that the code continues to work with the change in parameter type. This is the first in a series of changes to always store quota identifiers in the kernel in struct kqid and only use raw type and qid values when interacting with on disk structures or userspace. Always using struct kqid internally makes it hard to miss places that need conversion to or from the kernel internal values. Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18userns: Pass a userns parameter into posix_acl_to_xattr and posix_acl_from_xattrEric W. Biederman
- Pass the user namespace the uid and gid values in the xattr are stored in into posix_acl_from_xattr. - Pass the user namespace kuid and kgid values should be converted into when storing uid and gid values in an xattr in posix_acl_to_xattr. - Modify all callers of posix_acl_from_xattr and posix_acl_to_xattr to pass in &init_user_ns. In the short term this change is not strictly needed but it makes the code clearer. In the longer term this change is necessary to be able to mount filesystems outside of the initial user namespace that natively store posix acls in the linux xattr format. Cc: Theodore Tso <tytso@mit.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds
Pull GFS2 fixes from Steven Whitehouse: "Here are three GFS2 fixes for the current kernel tree. These are all related to the block reservation code which was added at the merge window. That code will be getting an update at the forthcoming merge window too. In the mean time though there are a few smaller issues which should be fixed. The first patch resolves an issue with write sizes of greater than 32 bits with the size hinting code. The second ensures that the allocation data structure is initialised when using xattrs and the third takes into account allocations which may have been made by other nodes which affect a reservation on the local node." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Take account of blockages when using reserved blocks GFS2: Fix missing allocation data for set/remove xattr GFS2: Make write size hinting code common
2012-09-13GFS2: Take account of blockages when using reserved blocksSteven Whitehouse
The claim_reserved_blks() function was not taking account of the possibility of "blockages" while performing allocation. This can be caused by another node allocating something in the same extent which has been reserved locally. This patch tests for this condition and then skips the remainder of the reservation in this case. This is a relatively rare event, so that it should not affect the general performance improvement which the block reservations provide. The claim_reserved_blks() function also appears not to be able to deal with reservations which cross bitmap boundaries, but that can be dealt with in a future patch since we don't generate boundary crossing reservations currently. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: David Teigland <teigland@redhat.com> Cc: Bob Peterson <rpeterso@redhat.com>
2012-09-13GFS2: Fix missing allocation data for set/remove xattrSteven Whitehouse
These entry points were missed in the original patch to allocate this data structure. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-13GFS2: Make write size hinting code commonSteven Whitehouse
This collects up the write size hinting code which is used by the block reservation subsystem into a single function. At the same time this also corrects the rounding for this calculation. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-20workqueue: deprecate flush[_delayed]_work_sync()Tejun Heo
flush[_delayed]_work_sync() are now spurious. Mark them deprecated and convert all users to flush[_delayed]_work(). If you're cc'd and wondering what's going on: Now all workqueues are non-reentrant and the regular flushes guarantee that the work item is not pending or running on any CPU on return, so there's no reason to use the sync flushes at all and they're going away. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mattia Dongili <malattia@linux.it> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: Anton Vorontsov <cbou@mail.ru> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Avi Kivity <avi@redhat.com>
2012-08-04gfs2: nuke pdflush from commentsArtem Bityutskiy
The pdflush thread is long gone, so this patch removes references to pdflush from gfs comments. Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
2012-07-31gfs2: Convert to new freezing mechanismJan Kara
We update gfs2_page_mkwrite() to use new freeze protection and the transaction code to use freeze protection while the transaction is running. That is needed to stop iput() of unlinked file from modifying the filesystem. The rest is handled by the generic code. CC: cluster-devel@redhat.com CC: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31gfs2: Push file_update_time() into gfs2_page_mkwrite()Jan Kara
CC: Steven Whitehouse <swhiteho@redhat.com> CC: cluster-devel@redhat.com Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>