summaryrefslogtreecommitdiffstats
path: root/fs/gfs2
AgeCommit message (Collapse)Author
2011-04-25add hlist_bl_lock/unlock helpersChristoph Hellwig
Now that the whole dcache_hash_bucket crap is gone, go all the way and also remove the weird locking layering violations for locking the hash buckets. Add hlist_bl_lock/unlock helpers to move the locking into the list abstraction instead of requiring each caller to open code it. After all allowing for the bit locks is the whole point of these helpers over the plain hlist variant. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-18GFS2: filesystem hang caused by incorrect lock orderBob Peterson
This patch fixes a deadlock in GFS2 where two processes are trying to reclaim an unlinked dinode: One holds the inode glock and calls gfs2_lookup_by_inum trying to look up the inode, which it can't, due to I_FREEING. The other has set I_FREEING from vfs and is at the beginning of gfs2_delete_inode waiting for the glock, which is held by the first. The solution is to add a new non_block parameter to the gfs2_iget function that causes it to return -ENOENT if the inode is being freed. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18GFS2: Don't try to deallocate unlinked inodes when mounted roSteven Whitehouse
This adds a couple of missing tests to avoid read-only nodes from attempting to deallocate unlinked inodes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: Michel Andre de la Porte <madelaporte@ubi.com>
2011-04-18GFS2: directly write blocks past i_sizeBenjamin Marzinski
GFS2 was relying on the writepage code to write out the zeroed data for fallocate. However, with FALLOC_FL_KEEP_SIZE set, this may be past i_size. If it is, it will be ignored. To work around this, gfs2 now calls write_dirty_buffer directly on the buffer_heads when FALLOC_FL_KEEP_SIZE is set, and it's writing past i_size. This version is just a cleanup of my last version Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18GFS2: write_end error path fails to unlock transaction lockBob Peterson
I did an audit of gfs2's transaction glock for bugzilla bug 658619 and ran across this: In function gfs2_write_end, in the unlikely event that gfs2_meta_inode_buffer returns an error, the code may forget to unlock the transaction lock because the "failed" label appears after the call to function gfs2_trans_end. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-24Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits) Documentation/iostats.txt: bit-size reference etc. cfq-iosched: removing unnecessary think time checking cfq-iosched: Don't clear queue stats when preempt. blk-throttle: Reset group slice when limits are changed blk-cgroup: Only give unaccounted_time under debug cfq-iosched: Don't set active queue in preempt block: fix non-atomic access to genhd inflight structures block: attempt to merge with existing requests on plug flush block: NULL dereference on error path in __blkdev_get() cfq-iosched: Don't update group weights when on service tree fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away block: Require subsystems to explicitly allocate bio_set integrity mempool jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging fs: make fsync_buffers_list() plug mm: make generic_writepages() use plugging blk-cgroup: Add unaccounted time to timeslice_used. block: fixup plugging stubs for !CONFIG_BLOCK block: remove obsolete comments for blkdev_issue_zeroout. blktrace: Use rq->cmd_flags directly in blk_add_trace_rq. ... Fix up conflicts in fs/{aio.c,super.c}
2011-03-23userns: rename is_owner_or_cap to inode_owner_or_capableSerge E. Hallyn
And give it a kernel-doc comment. [akpm@linux-foundation.org: btrfs changed in linux-next] Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-20Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits) video: change to new flag variable scsi: change to new flag variable rtc: change to new flag variable rapidio: change to new flag variable pps: change to new flag variable net: change to new flag variable misc: change to new flag variable message: change to new flag variable memstick: change to new flag variable isdn: change to new flag variable ieee802154: change to new flag variable ide: change to new flag variable hwmon: change to new flag variable dma: change to new flag variable char: change to new flag variable fs: change to new flag variable xtensa: change to new flag variable um: change to new flag variables s390: change to new flag variable mips: change to new flag variable ... Fix up trivial conflict in drivers/hwmon/Makefile
2011-03-17fs: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. And change ntfs-objs to ntfs-y for cleaner conditional inclusion. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (33 commits) AppArmor: kill unused macros in lsm.c AppArmor: cleanup generated files correctly KEYS: Add an iovec version of KEYCTL_INSTANTIATE KEYS: Add a new keyctl op to reject a key with a specified error code KEYS: Add a key type op to permit the key description to be vetted KEYS: Add an RCU payload dereference macro AppArmor: Cleanup make file to remove cruft and make it easier to read SELinux: implement the new sb_remount LSM hook LSM: Pass -o remount options to the LSM SELinux: Compute SID for the newly created socket SELinux: Socket retains creator role and MLS attribute SELinux: Auto-generate security_is_socket_class TOMOYO: Fix memory leak upon file open. Revert "selinux: simplify ioctl checking" selinux: drop unused packet flow permissions selinux: Fix packet forwarding checks on postrouting selinux: Fix wrong checks for selinux_policycap_netpeer selinux: Fix check for xfrm selinux context algorithm ima: remove unnecessary call to ima_must_measure IMA: remove IMA imbalance checking ...
2011-03-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: GFS2: Don't use _raw version of RCU dereference GFS2: Adding missing unlock_page() GFS2: Update to AIL list locking GFS2: introduce AIL lock GFS2: fix block allocation check for fallocate GFS2: Optimize glock multiple-dequeue code GFS2: Remove potential race in flock code GFS2: Fix glock deallocation race GFS2: quota allows exceeding hard limit GFS2: deallocation performance patch GFS2: panics on quotacheck update GFS2: Improve cluster mmap scalability GFS2: Fix glock queue trace point GFS2: Post-VFS scale update for RCU path walk GFS2: Use RCU for glock hash table
2011-03-16Merge branch 'next' into for-linusJames Morris
2011-03-15GFS2: Don't use _raw version of RCU dereferenceSteven Whitehouse
As per RCU glock patch review comments, don't use the _raw version of this function here. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-03-14GFS2: Adding missing unlock_page()Maxim
gfs2_write_begin() calls grab_cache_page_write_begin() that returns *locked* page. Correspondent error-handling path lacks for unlock_page() call: > out: > if (error == 0) > return 0; > > page_cache_release(page); The whole system hangs if gfs2_unstuff_dinode() called from gfs2_write_begin() failed for some reason. Reported-by: Maxim <maxim.patlasov@gmail.com> Signed-off-by: Maxim <maxim.patlasov@gmail.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-14exportfs: Return the minimum required handle sizeAneesh Kumar K.V
The exportfs encode handle function should return the minimum required handle size. This helps user to find out the handle size by passing 0 handle size in the first step and then redoing to the call again with the returned handle size value. Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14GFS2: Update to AIL list lockingSteven Whitehouse
The previous patch missed a couple of places where the AIL list needed locking, so this fixes up those places, plus a comment is corrected too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Chinner <dchinner@redhat.com>
2011-03-11GFS2: introduce AIL lockDave Chinner
The log lock is currently used to protect the AIL lists and the movements of buffers into and out of them. The lists are self contained and no log specific items outside the lists are accessed when starting or emptying the AIL lists. Hence the operation of the AIL does not require the protection of the log lock so split them out into a new AIL specific lock to reduce the amount of traffic on the log lock. This will also reduce the amount of serialisation that occurs when the gfs2_logd pushes on the AIL to move it forward. This reduces the impact of log pushing on sequential write throughput. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11GFS2: fix block allocation check for fallocateBenjamin Marzinski
GFS2 fallocate wasn't properly checking if a blocks were already allocated. In write_empty_blocks(), if a page didn't have buffer_heads attached, GFS2 was always treating it as if there were no blocks allocated for that page. GFS2 now calls gfs2_block_map() to check if the blocks are allocated before writing them out. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11GFS2: Optimize glock multiple-dequeue codeBob Peterson
This is a small patch that optimizes multiple glock dequeue operations. It changes the unlock order to be more efficient and makes it easier for lock debugging tools to unravel. It also eliminates the need for the temp variable x, although that would likely be optimized out. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-10gfs2: fix d_revalidate oopsen on NFS exportsAl Viro
can't blindly check nd->flags in ->d_revalidate() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-10Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/coreJens Axboe
Conflicts: block/blk-core.c block/blk-flush.c drivers/md/raid1.c drivers/md/raid10.c drivers/md/raid5.c fs/nilfs2/btnode.c fs/nilfs2/mdt.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10block: kill off REQ_UNPLUGJens Axboe
With the plugging now being explicitly controlled by the submitter, callers need not pass down unplugging hints to the block layer. If they want to unplug, it's because they manually plugged on their own - in which case, they should just unplug at will. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10block: remove per-queue pluggingJens Axboe
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-09GFS2: Remove potential race in flock codeSteven Whitehouse
This patch ensures that we always wait for glock demotion when dropping flocks on a file in order to prevent any race conditions associated with further flock calls or closing the file. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-09GFS2: Fix glock deallocation raceSteven Whitehouse
This patch fixes a race in deallocating glocks which was introduced in the RCU glock patch. We need to ensure that the glock count is kept correct even in the case that there is a race to add a new glock into the hash table. Also, to avoid having to wait for an RCU grace period, the glock counter can be decremented before call_rcu() is called. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-09GFS2: quota allows exceeding hard limitAbhijith Das
Immediately after being synced to disk, cached quotas are zeroed out and a subsequent access of the cached quotas results in incorrect zero values. This meant that gfs2 assumed the actual usage to be the zero (or near-zero) usage values it found in the cached quotas and comparison against warn/limits never triggered a quota violation. This patch adds a new flag QDF_REFRESH that is set after a sync so that the cached quotas are forcefully refreshed from disk on a subsequent access on seeing this flag set. Resolves: rhbz#675944 Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-08Merge branch 'master' of git://git.infradead.org/users/eparis/selinux into nextJames Morris
2011-02-24GFS2: deallocation performance patchBob Peterson
This patch is a performance improvement to GFS2's dealloc code. Rather than update the quota file and statfs file for every single block that's stripped off in unlink function do_strip, this patch keeps track and updates them once for every layer that's stripped. This is done entirely inside the existing transaction, so there should be no risk of corruption. The other functions that deallocate blocks will be unaffected because they are using wrapper functions that do the same thing that they do today. I tested this code on my roth cluster by creating 200 files in a directory, each of which is 100MB, then on four nodes, I simultaneously deleted the files, thus competing for GFS2 resources (but different files). The commands I used were: [root@roth-01]# time for i in `seq 1 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done [root@roth-02]# time for i in `seq 2 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done [root@roth-03]# time for i in `seq 3 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done [root@roth-05]# time for i in `seq 4 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done The performance increase was significant: roth-01 roth-02 roth-03 roth-05 --------- --------- --------- --------- old: real 0m34.027 0m25.021s 0m23.906s 0m35.646s new: real 0m22.379s 0m24.362s 0m24.133s 0m18.562s Total time spent deleting: old: 118.6s new: 89.4 For this particular case, this showed a 25% performance increase for GFS2 unlinks. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-02-23mm: prevent concurrent unmap_mapping_range() on the same inodeMiklos Szeredi
Michael Leun reported that running parallel opens on a fuse filesystem can trigger a "kernel BUG at mm/truncate.c:475" Gurudas Pai reported the same bug on NFS. The reason is, unmap_mapping_range() is not prepared for more than one concurrent invocation per inode. For example: thread1: going through a big range, stops in the middle of a vma and stores the restart address in vm_truncate_count. thread2: comes in with a small (e.g. single page) unmap request on the same vma, somewhere before restart_address, finds that the vma was already unmapped up to the restart address and happily returns without doing anything. Another scenario would be two big unmap requests, both having to restart the unmapping and each one setting vm_truncate_count to its own value. This could go on forever without any of them being able to finish. Truncate and hole punching already serialize with i_mutex. Other callers of unmap_mapping_range() do not, and it's difficult to get i_mutex protection for all callers. In particular ->d_revalidate(), which calls invalidate_inode_pages2_range() in fuse, may be called with or without i_mutex. This patch adds a new mutex to 'struct address_space' to prevent running multiple concurrent unmap_mapping_range() on the same mapping. [ We'll hopefully get rid of all this with the upcoming mm preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex lockbreak" patch in particular. But that is for 2.6.39 ] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reported-by: Michael Leun <lkml20101129@newton.leun.net> Reported-by: Gurudas Pai <gurudas.pai@oracle.com> Tested-by: Gurudas Pai <gurudas.pai@oracle.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-16workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'Tejun Heo
There are two spellings in use for 'freeze' + 'able' - 'freezable' and 'freezeable'. The former is the more prominent one. The latter is mostly used by workqueue and in a few other odd places. Unify the spelling to 'freezable'. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Dubov <oakad@yahoo.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Steven Whitehouse <swhiteho@redhat.com>
2011-02-07GFS2: panics on quotacheck updateAbhijith Das
Handle block allocation for forceful unstuffing of quota dinode during quota update using quotactl(). Also fix block reservation for special cases when quotas cross over block boundaries and update 2 blocks instead of 1. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-02-02GFS2: Improve cluster mmap scalabilitySteven Whitehouse
The mmap system call grabs a glock when an update to atime maybe required. It does this in order to ensure that the flags on the inode are uptodate, but since it will only mark atime for a future update, an exclusive lock is not required here (one will be taken later when the actual update is performed). Also, the lock can be skipped when the mount is marked noatime in addition to the original check which only looked at the noatime flag for the inode itself. This should increase the scalability of the mmap call when multiple nodes are all mmaping the same file. Reported-by: Scooter Morris <scooter@cgl.ucsf.edu> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-02-01fs/vfs/security: pass last path component to LSM on inode creationEric Paris
SELinux would like to implement a new labeling behavior of newly created inodes. We currently label new inodes based on the parent and the creating process. This new behavior would also take into account the name of the new object when deciding the new label. This is not the (supposed) full path, just the last component of the path. This is very useful because creating /etc/shadow is different than creating /etc/passwd but the kernel hooks are unable to differentiate these operations. We currently require that userspace realize it is doing some difficult operation like that and than userspace jumps through SELinux hoops to get things set up correctly. This patch does not implement new behavior, that is obviously contained in a seperate SELinux patch, but it does pass the needed name down to the correct LSM hook. If no such name exists it is fine to pass NULL. Signed-off-by: Eric Paris <eparis@redhat.com>
2011-01-31GFS2: Fix glock queue trace pointSteven Whitehouse
Somehow this tracepoint landed up in the wrong place. This moves it to where it should be. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-01-21GFS2: Post-VFS scale update for RCU path walkSteven Whitehouse
We can allow a few more cases to use RCU path walking than originally allowed. It should be possible to also enable RCU path walking when the glock is already cached. Thats a bit more complicated though, so left for a future patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Nick Piggin <npiggin@gmail.com>
2011-01-21GFS2: Use RCU for glock hash tableSteven Whitehouse
This has a number of advantages: - Reduces contention on the hash table lock - Makes the code smaller and simpler - Should speed up glock dumps when under load - Removes ref count changing in examine_bucket - No longer need hash chain lock in glock_put() in common case There are some further changes which this enables and which we may do in the future. One is to look at using SLAB_RCU, and another is to look at using a per-cpu counter for the per-sb glock counter, since that is touched twice in the lifetime of each glock (but only used at umount time). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-01-18GFS2: Fix error path in gfs2_lookup_by_inum()Steven Whitehouse
In the (impossible, except if there is fs corruption) error path in gfs2_lookup_by_inum() if the call to gfs2_inode_refresh() fails, it was leaving the function by calling iput() rather than iget_failed(). This would cause future lookups of the same inode to block forever. This patch fixes the problem by moving the call to gfs2_inode_refresh() into gfs2_inode_lookup() where iget_failed() is part of the error path already. Also this cleans up some unreachable code and makes gfs2_set_iop() static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-01-18GFS2: remove iopen glocks from cache on failed deletesBenjamin Marzinski
When a file gets deleted on GFS2, if a node can't get an exclusive lock on the file's iopen glock, it punts on actually freeing up the space, because another node is using the file. When it does this, it needs to drop the iopen glock from its cache so that the other node can get an exclusive lock on it. Now, gfs2_delete_inode() sets GL_NOCACHE before dropping the shared lock on the iopen glock in preparation for grabbing it in the exclusive state. Since the node needs the glock in the exclusive state, dropping the shared lock from the cache doesn't slow down the case where no other nodes are using the file. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-01-17fallocate should be a file operationChristoph Hellwig
Currently all filesystems except XFS implement fallocate asynchronously, while XFS forced a commit. Both of these are suboptimal - in case of O_SYNC I/O we really want our allocation on disk, especially for the !KEEP_SIZE case where we actually grow the file with user-visible zeroes. On the other hand always commiting the transaction is a bad idea for fast-path uses of fallocate like for example in recent Samba versions. Given that block allocation is a data plane operation anyway change it from an inode operation to a file operation so that we have the file structure available that lets us check for O_SYNC. This also includes moving the code around for a few of the filesystems, and remove the already unnedded S_ISDIR checks given that we only wire up fallocate for regular files. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-17make the feature checks in ->fallocate future proofChristoph Hellwig
Instead of various home grown checks that might need updates for new flags just check for any bit outside the mask of the features supported by the filesystem. This makes the check future proof for any newly added flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-13Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits) block: ensure that completion error gets properly traced blktrace: add missing probe argument to block_bio_complete block cfq: don't use atomic_t for cfq_group block cfq: don't use atomic_t for cfq_queue block: trace event block fix unassigned field block: add internal hd part table references block: fix accounting bug on cross partition merges kref: add kref_test_and_get bio-integrity: mark kintegrityd_wq highpri and CPU intensive block: make kblockd_workqueue smarter Revert "sd: implement sd_check_events()" block: Clean up exit_io_context() source code. Fix compile warnings due to missing removal of a 'ret' variable fs/block: type signature of major_to_index(int) to major_to_index(unsigned) block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p) cfq-iosched: don't check cfqg in choose_service_tree() fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors cdrom: export cdrom_check_events() sd: implement sd_check_events() sr: implement sr_check_events() ...
2011-01-12Gfs2: fail if we try to use hole punchJosef Bacik
Gfs2 doesn't have the ability to punch holes yet, so make sure we return EOPNOTSUPP if we try to use hole punching through fallocate. This support can be added later. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-12switch gfs2, close racesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-10headers: kobject.h reduxAlexey Dobriyan
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-07Merge branch 'vfs-scale-working' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin * 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits) fs: scale mntget/mntput fs: rename vfsmount counter helpers fs: implement faster dentry memcmp fs: prefetch inode data in dcache lookup fs: improve scalability of pseudo filesystems fs: dcache per-inode inode alias locking fs: dcache per-bucket dcache hash locking bit_spinlock: add required includes kernel: add bl_list xfs: provide simple rcu-walk ACL implementation btrfs: provide simple rcu-walk ACL implementation ext2,3,4: provide simple rcu-walk ACL implementation fs: provide simple rcu-walk generic_check_acl implementation fs: provide rcu-walk aware permission i_ops fs: rcu-walk aware d_revalidate method fs: cache optimise dentry and inode for rcu-walk fs: dcache reduce branches in lookup path fs: dcache remove d_mounted fs: fs_struct use seqlock fs: rcu-walk for path lookup ...
2011-01-07fs: provide rcu-walk aware permission i_opsNick Piggin
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: rcu-walk aware d_revalidate methodNick Piggin
Require filesystems be aware of .d_revalidate being called in rcu-walk mode (nd->flags & LOOKUP_RCU). For now do a simple push down, returning -ECHILD from all implementations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: dcache reduce branches in lookup pathNick Piggin
Reduce some branches and memory accesses in dcache lookup by adding dentry flags to indicate common d_ops are set, rather than having to check them. This saves a pointer memory access (dentry->d_op) in common path lookup situations, and saves another pointer load and branch in cases where we have d_op but not the particular operation. Patched with: git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: icache RCU free inodesNick Piggin
RCU free the struct inode. This will allow: - Subsequent store-free path walking patch. The inode must be consulted for permissions when walking, so an RCU inode reference is a must. - sb_inode_list_lock to be moved inside i_lock because sb list walkers who want to take i_lock no longer need to take sb_inode_list_lock to walk the list in the first place. This will simplify and optimize locking. - Could remove some nested trylock loops in dcache code - Could potentially simplify things a bit in VM land. Do not need to take the page lock to follow page->mapping. The downsides of this is the performance cost of using RCU. In a simple creat/unlink microbenchmark, performance drops by about 10% due to inability to reuse cache-hot slab objects. As iterations increase and RCU freeing starts kicking over, this increases to about 20%. In cases where inode lifetimes are longer (ie. many inodes may be allocated during the average life span of a single inode), a lot of this cache reuse is not applicable, so the regression caused by this patch is smaller. The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU, however this adds some complexity to list walking and store-free path walking, so I prefer to implement this at a later date, if it is shown to be a win in real situations. I haven't found a regression in any non-micro benchmark so I doubt it will be a problem. Signed-off-by: Nick Piggin <npiggin@kernel.dk>