summaryrefslogtreecommitdiffstats
path: root/fs/jbd2
AgeCommit message (Collapse)Author
2010-10-22Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits) xen-blkfront: disable barrier/flush write support Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c block: remove BLKDEV_IFL_WAIT aic7xxx_old: removed unused 'req' variable block: remove the BH_Eopnotsupp flag block: remove the BLKDEV_IFL_BARRIER flag block: remove the WRITE_BARRIER flag swap: do not send discards as barriers fat: do not send discards as barriers ext4: do not send discards as barriers jbd2: replace barriers with explicit flush / FUA usage jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier jbd: replace barriers with explicit flush / FUA usage nilfs2: replace barriers with explicit flush / FUA usage reiserfs: replace barriers with explicit flush / FUA usage gfs2: replace barriers with explicit flush / FUA usage btrfs: replace barriers with explicit flush / FUA usage xfs: replace barriers with explicit flush / FUA usage block: pass gfp_mask and flags to sb_issue_discard dm: convey that all flushes are processed as empty ...
2010-10-22Merge branch 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits) cfq-iosched: Fix a gcc 4.5 warning and put some comments block: Turn bvec_k{un,}map_irq() into static inline functions block: fix accounting bug on cross partition merges block: Make the integrity mapped property a bio flag block: Fix double free in blk_integrity_unregister block: Ensure physical block size is unsigned int blkio-throttle: Fix possible multiplication overflow in iops calculations blkio-throttle: limit max iops value to UINT_MAX blkio-throttle: There is no need to convert jiffies to milli seconds blkio-throttle: Fix link failure failure on i386 blkio: Recalculate the throttled bio dispatch time upon throttle limit change blkio: Add root group to td->tg_list blkio: deletion of a cgroup was causes oops blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n block: set the bounce_pfn to the actual DMA limit rather than to max memory block: revert bad fix for memory hotplug causing bounces Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK block: set the bounce_pfn to the actual DMA limit rather than to max memory block: Prevent hang_check firing during long I/O cfq: improve fsync performance for small files ... Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h
2010-09-20cfq: improve fsync performance for small filesCorrado Zoccolo
Fsync performance for small files achieved by cfq on high-end disks is lower than what deadline can achieve, due to idling introduced between the sync write happening in process context and the journal commit. Moreover, when competing with a sequential reader, a process writing small files and fsync-ing them is starved. This patch fixes the two problems by: - marking journal commits as WRITE_SYNC, so that they get the REQ_NOIDLE flag set, - force all queues that have REQ_NOIDLE requests to be put in the noidle tree. Having the queue associated to the fsync-ing process and the one associated to journal commits in the noidle tree allows: - switching between them without idling, - fairness vs. competing idling queues, since they will be serviced only after the noidle tree expires its slice. Acked-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Tested-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16block: remove BLKDEV_IFL_WAITChristoph Hellwig
All the blkdev_issue_* helpers can only sanely be used for synchronous caller. To issue cache flushes or barriers asynchronously the caller needs to set up a bio by itself with a completion callback to move the asynchronous state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always specified when calling blkdev_issue_* and also remove the now unused flags argument to blkdev_issue_flush and blkdev_issue_zeroout. For blkdev_issue_discard we need to keep it for the secure discard flag, which gains a more descriptive name and loses the bitops vs flag confusion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10JBD2: Allow feature checks before journal recoveryPatrick J. LoPresti
Before we start accessing a huge (> 16 TiB) OCFS2 volume, we need to confirm that its journal supports 64-bit offsets. In particular, we need to check the journal's feature bits before recovering the journal. This is not possible with JBD2 at present, because the journal superblock (where the feature bits reside) is not loaded from disk until the journal is recovered. This patch loads the journal superblock in jbd2_journal_check_used_features() if it has not already been loaded, allowing us to check the feature bits before journal recovery. Signed-off-by: Patrick LoPresti <lopresti@gmail.com> Cc: linux-ext4@vger.kernel.org Acked-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-10jbd2: replace barriers with explicit flush / FUA usageChristoph Hellwig
Switch to the WRITE_FLUSH_FUA flag for journal commits and remove the EOPNOTSUPP detection for barriers. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrierJan Kara
Currently JBD2 relies blkdev_issue_flush() draining the queue when ASYNC_COMMIT feature is set. This property is going away so make JBD2 wait for buffers it needs on its own before submitting the cache flush. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-18remove SWRITE* I/O typesChristoph Hellwig
These flags aren't real I/O types, but tell ll_rw_block to always lock the buffer instead of giving up on a failed trylock. Instead add a new write_dirty_buffer helper that implements this semantic and use it from the existing SWRITE* callers. Note that the ll_rw_block code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which this patch fixes. In the ufs code clean up the helper that used to call ll_rw_block to mirror sync_dirty_buffer, which is the function it implements for compound buffers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18kill BH_Ordered flagChristoph Hellwig
Instead of abusing a buffer_head flag just add a variant of sync_dirty_buffer which allows passing the exact type of write flag required. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09ext4: clean up compiler warning in start_this_handle()Theodore Ts'o
Fix the compiler warning: fs/jbd2/transaction.c: In function ‘start_this_handle’: fs/jbd2/transaction.c:98: warning: unused variable ‘ts’ Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-07Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits) ext4: Adding error check after calling ext4_mb_regular_allocator() ext4: Fix dirtying of journalled buffers in data=journal mode ext4: re-inline ext4_rec_len_(to|from)_disk functions jbd2: Remove t_handle_lock from start_this_handle() jbd2: Change j_state_lock to be a rwlock_t jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop ext4: Add mount options in superblock ext4: force block allocation on quota_off ext4: fix freeze deadlock under IO ext4: drop inode from orphan list if ext4_delete_inode() fails ext4: check to make make sure bd_dev is set before dereferencing it jbd2: Make barrier messages less scary ext4: don't print scary messages for allocation failures post-abort ext4: fix EFBIG edge case when writing to large non-extent file ext4: fix ext4_get_blocks references ext4: Always journal quota file modifications ext4: Fix potential memory leak in ext4_fill_super ext4: Don't error out the fs if the user tries to make a file too big ext4: allocate stripe-multiple IOs on stripe boundaries ext4: move aio completion after unwritten extent conversion ... Fix up conflicts in fs/ext4/inode.c as per Ted. Fix up xfs conflicts as per earlier xfs merge.
2010-08-03jbd2: Remove t_handle_lock from start_this_handle()Theodore Ts'o
This should remove the last exclusive lock from start_this_handle(), so that we should now be able to start multiple transactions at the same time on large SMP systems. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-03jbd2: Change j_state_lock to be a rwlock_tTheodore Ts'o
Lockstat reports have shown that j_state_lock is a major source of lock contention, especially on systems with more than 4 CPU cores. So change it to be a read/write spinlock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-02jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stopTheodore Ts'o
By using an atomic_t for t_updates and t_outstanding credits, this should allow us to not need to take transaction t_handle_lock in jbd2_journal_stop(). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27jbd2: Make barrier messages less scaryEric Sandeen
Saying things like "sync failed" when a device does not support barriers makes users slightly more worried than they need to be; rather than talking about sync failures, let's just state the barrier-based facts. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27jbd2: Remove __GFP_NOFAIL from jbd2 layerTheodore Ts'o
__GFP_NOFAIL is going away, so add our own retry loop. Also add jbd2__journal_start() and jbd2__journal_restart() which take a gfp mask, so that file systems can optionally (re)start transaction handles using GFP_KERNEL. If they do this, then they need to be prepared to handle receiving an PTR_ERR(-ENOMEM) error, and be ready to reflect that error up to userspace. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-15jbd2/ocfs2: Fix block checksumming when a buffer is used in several transactionsJan Kara
OCFS2 uses t_commit trigger to compute and store checksum of the just committed blocks. When a buffer has b_frozen_data, checksum is computed for it instead of b_data but this can result in an old checksum being written to the filesystem in the following scenario: 1) transaction1 is opened 2) handle1 is opened 3) journal_access(handle1, bh) - This sets jh->b_transaction to transaction1 4) modify(bh) 5) journal_dirty(handle1, bh) 6) handle1 is closed 7) start committing transaction1, opening transaction2 8) handle2 is opened 9) journal_access(handle2, bh) - This copies off b_frozen_data to make it safe for transaction1 to commit. jh->b_next_transaction is set to transaction2. 10) jbd2_journal_write_metadata() checksums b_frozen_data 11) the journal correctly writes b_frozen_data to the disk journal 12) handle2 is closed - There was no dirty call for the bh on handle2, so it is never queued for any more journal operation 13) Checkpointing finally happens, and it just spools the bh via normal buffer writeback. This will write b_data, which was never triggered on and thus contains a wrong (old) checksum. This patch fixes the problem by calling the trigger at the moment data is frozen for journal commit - i.e., either when b_frozen_data is created by do_get_write_access or just before we write a buffer to the log if b_frozen_data does not exist. We also rename the trigger to t_frozen as that better describes when it is called. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-06-14ext4: remove initialized but not read variablesAndi Kleen
No real bugs found, just removed some dead code. Found by gcc 4.6's new warnings. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-27Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits) ext4: Make fsync sync new parent directories in no-journal mode ext4: Drop whitespace at end of lines ext4: Fix compat EXT4_IOC_ADD_GROUP ext4: Conditionally define compat ioctl numbers tracing: Convert more ext4 events to DEFINE_EVENT ext4: Add new tracepoints to track mballoc's buddy bitmap loads ext4: Add a missing trace hook ext4: restart ext4_ext_remove_space() after transaction restart ext4: Clear the EXT4_EOFBLOCKS_FL flag only when warranted ext4: Avoid crashing on NULL ptr dereference on a filesystem error ext4: Use bitops to read/modify i_flags in struct ext4_inode_info ext4: Convert calls of ext4_error() to EXT4_ERROR_INODE() ext4: Convert callers of ext4_get_blocks() to use ext4_map_blocks() ext4: Add new abstraction ext4_map_blocks() underneath ext4_get_blocks() ext4: Use our own write_cache_pages() ext4: Show journal_checksum option ext4: Fix for ext4_mb_collect_stats() ext4: check for a good block group before loading buddy pages ext4: Prevent creation of files larger than RLIMIT_FSIZE using fallocate ext4: Remove extraneous newlines in ext4_msg() calls ... Fixed up trivial conflict in fs/ext4/fsync.c
2010-05-21Merge branch 'master' into for-2.6.35Jens Axboe
Conflicts: fs/ext3/fsync.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-16jbd2: Improve scalability by not taking j_state_lock in jbd2_journal_stop()Theodore Ts'o
One of the most contended locks in the jbd2 layer is j_state_lock when running dbench. This is especially true if using the real-time kernel with its "sleeping spinlocks" patch that replaces spinlocks with priority inheriting mutexes --- but it also shows up on large SMP benchmarks. Thanks to John Stultz for pointing this out. Reviewed by Mingming Cao and Jan Kara. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-11jbd2: use NULL instead of 0 when pointer is neededBill Pemberton
Fixes sparse warning: fs/jbd2/journal.c:1892:9: warning: Using plain integer as NULL pointer Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> CC: linux-ext4@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-28blkdev: generalize flags for blkdev_issue_fn functionsDmitry Monakhov
The patch just convert all blkdev_issue_xxx function to common set of flags. Wait/allocation semantics preserved. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-24jbd2: clean up an assertion in jbd2_journal_commit_transaction()dingdinghua
commit_transaction has the same value as journal->j_running_transaction, so we can simplify the assert statement. Signed-off-by: dingdinghua <dingdinghua@nrchpc.ac.cn> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-02-15jbd2: delay discarding buffers in journal_unmap_bufferdingdinghua
Delay discarding buffers in journal_unmap_buffer until we know that "add to orphan" operation has definitely been committed, otherwise the log space of committing transation may be freed and reused before truncate get committed, updates may get lost if crash happens. Signed-off-by: dingdinghua <dingdinghua@nrchpc.ac.cn> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-07ext4: Use slab allocator for sub-page sized allocationsTheodore Ts'o
Now that the SLUB seems to be fixed so that it respects the requested alignment, use kmem_cache_alloc() to allocator if the block size of the buffer heads to be allocated is less than the page size. Previously, we were using 16k page on a Power system for each buffer, even when the file system was using 1k or 4k block size. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-23ext4: Add new tracepoint for jbd2_cleanup_journal_tailTheodore Ts'o
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-23jbd2: don't use __GFP_NOFAIL in journal_init_common()Andrew Morton
It triggers the warning in get_page_from_freelist(), and it isn't appropriate to use __GFP_NOFAIL here anyway. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14843 Reported-by: Christian Casteyde <casteyde.christian@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-23ext4, jbd2: Add barriers for file systems with exernal journalsTheodore Ts'o
This is a bit complicated because we are trying to optimize when we send barriers to the fs data disk. We could just throw in an extra barrier to the data disk whenever we send a barrier to the journal disk, but that's not always strictly necessary. We only need to send a barrier during a commit when there are data blocks which are must be written out due to an inode written in ordered mode, or if fsync() depends on the commit to force data blocks to disk. Finally, before we drop transactions from the beginning of the journal during a checkpoint operation, we need to guarantee that any blocks that were flushed out to the data disk are firmly on the rust platter before we drop the transaction from the journal. Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-23jbd: jbd-debug and jbd2-debug should be writableYin Kangkai
jbd-debug and jbd2-debug is currently read-only (S_IRUGO), which is not correct. Make it writable so that we can start debuging. Signed-off-by: Yin Kangkai <kangkai.yin@intel.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-17Revert "task_struct: make journal_info conditional"Linus Torvalds
This reverts commit e4c570c4cb7a95dbfafa3d016d2739bf3fdfe319, as requested by Alexey: "I think I gave a good enough arguments to not merge it. To iterate: * patch makes impossible to start using ext3 on EXT3_FS=n kernels without reboot. * this is done only for one pointer on task_struct" None of config options which define task_struct are tristate directly or effectively." Requested-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15task_struct: make journal_info conditionalHiroshi Shimamoto
journal_info in task_struct is used in journaling file system only. So introduce CONFIG_FS_JOURNAL_INFO and make it conditional. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits) ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks() ext3: Fix data / filesystem corruption when write fails to copy data ext4: Support for 64-bit quota format ext3: Support for vfsv1 quota format quota: Implement quota format with 64-bit space and inode limits quota: Move definition of QFMT_OCFS2 to linux/quota.h ext2: fix comment in ext2_find_entry about return values ext3: Unify log messages in ext3 ext2: clear uptodate flag on super block I/O error ext2: Unify log messages in ext2 ext3: make "norecovery" an alias for "noload" ext3: Don't update the superblock in ext3_statfs() ext3: journal all modifications in ext3_xattr_set_handle ext2: Explicitly assign values to on-disk enum of filetypes quota: Fix WARN_ON in lookup_one_len const: struct quota_format_ops ubifs: remove manual O_SYNC handling afs: remove manual O_SYNC handling kill wait_on_page_writeback_range vfs: Implement proper O_SYNC semantics ...
2009-12-10kill wait_on_page_writeback_rangeChristoph Hellwig
All callers really want the more logical filemap_fdatawait_range interface, so convert them to use it and merge wait_on_page_writeback_range into filemap_fdatawait_range. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-09jbd2: Export jbd2_log_start_commit to fix ext4 buildTheodore Ts'o
This fixes: ERROR: "jbd2_log_start_commit" [fs/ext4/ext4.ko] undefined! Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-01jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer()Theodore Ts'o
OOM happens. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-11-15jbd2: don't wipe the journal on a failed journal checksumTheodore Ts'o
If there is a failed journal checksum, don't reset the journal. This allows for userspace programs to decide how to recover from this situation. It may be that ignoring the journal checksum failure might be a better way of recovering the file system. Once we add per-block checksums, we can definitely do better. Until then, a system administrator can try backing up the file system image (or taking a snapshot) and and trying to determine experimentally whether ignoring the checksum failure or aborting the journal replay results in less data loss. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2009-11-11JBD/JBD2: free j_wbuf if journal init fails.Tao Ma
If journal init fails, we need to free j_wbuf. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2009-10-01const: constify remaining file_operationsAlexey Dobriyan
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-30jbd2: Use tracepoints for history fileTheodore Ts'o
The /proc/fs/jbd2/<dev>/history was maintained manually; by using tracepoints, we can get all of the existing functionality of the /proc file plus extra capabilities thanks to the ftrace infrastructure. We save memory as a bonus. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-29ext4, jbd2: Drop unneeded printks at mount and unmount timeTheodore Ts'o
There are a number of kernel printk's which are printed when an ext4 filesystem is mounted and unmounted. Disable them to economize space in the system logs. In addition, disabling the mballoc stats by default saves a number of unneeded atomic operations for every block allocation or deallocation. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-23seq_file: constify seq_operationsJames Morris
Make all seq_operations structs const, to help mitigate against revectoring user-triggerable function pointers. This is derived from the grsecurity patch, although generated from scratch because it's simpler than extracting the changes from there. Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-11ext4: Fix async commit mode to be safe by using a barrierTheodore Ts'o
Previously the journal_async_commit mount option was equivalent to using barrier=0 (and just as unsafe). This patch fixes it so that we eliminate the barrier before the commit block (by not using ordered mode), and explicitly issuing an empty barrier bio after writing the commit block. Because of the journal checksum, it is safe to do this; if the journal blocks are not all written before a power failure, the checksum in the commit block will prevent the last transaction from being replayed. Using the fs_mark benchmark, using journal_async_commit shows a 50% improvement: FSUse% Count Size Files/sec App Overhead 8 1000 10240 30.5 28242 vs. FSUse% Count Size Files/sec App Overhead 8 1000 10240 45.8 28620 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-08-17jbd2: Annotate transaction start also for jbd2_journal_restart()Jan Kara
lockdep annotation for a transaction start has been at the end of jbd2_journal_start(). But a transaction is also started from jbd2_journal_restart(). Move the lockdep annotation to start_this_handle() which covers both cases. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-08-10jbd2: round commit timer up to avoid uncommitted transactionAndreas Dilger
fix jiffie rounding in jbd commit timer setup code. Rounding down could cause the timer to be fired before the corresponding transaction has expired. That transaction can stay not committed forever if no new transaction is created or expicit sync/umount happens. Signed-off-by: Alex Zhuravlev (Tomas) <alex.zhuravlev@sun.com> Signed-off-by: Andreas Dilger <adilger@sun.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-07-17jbd2: Fail to load a journal if it is too shortJan Kara
Due to on disk corruption, it can happen that journal is too short. Fail to load it in such case so that we don't oops somewhere later. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-16writeback: get rid of wbc->for_writepagesJens Axboe
It's only set, it's never checked. Kill it. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-13jbd2: fix race between write_metadata_buffer and get_write_accessdingdinghua
The function jbd2_journal_write_metadata_buffer() calls jbd_unlock_bh_state(bh_in) too early; this could potentially allow another thread to call get_write_access on the buffer head, modify the data, and dirty it, and allowing the wrong data to be written into the journal. Fortunately, if we lose this race, the only time this will actually cause filesystem corruption is if there is a system crash or other unclean shutdown of the system before the next commit can take place. Signed-off-by: dingdinghua <dingdinghua85@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-07-13jbd2: Fix a race between checkpointing code and journal_get_write_access()Jan Kara
The following race can happen: CPU1 CPU2 checkpointing code checks the buffer, adds it to an array for writeback do_get_write_access() ... lock_buffer() unlock_buffer() flush_batch() submits the buffer for IO __jbd2_journal_file_buffer() So a buffer under writeout is returned from do_get_write_access(). Since the filesystem code relies on the fact that journaled buffers cannot be written out, it does not take the buffer lock and so it can modify buffer while it is under writeout. That can lead to a filesystem corruption if we crash at the right moment. We fix the problem by clearing the buffer dirty bit under buffer_lock even if the buffer is on BJ_None list. Actually, we clear the dirty bit regardless the list the buffer is in and warn about the fact if the buffer is already journalled. Thanks for spotting the problem goes to dingdinghua <dingdinghua85@gmail.com>. Reported-by: dingdinghua <dingdinghua85@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>